CSSfilter Property
Example
Change all images to black and white (100% gray):
img {
filter: grayscale(100%);
}
Try it Yourself »filter: grayscale(100%);
}
Tip: More "Try it Yourself" examples below.
Definition and Usage
Thefilter property defines visual effects (like blur and saturation) to an element (often <img>).
| Default value: | none |
|---|---|
| Inherited: | no |
| Animatable: | yes.Read aboutanimatableTry it |
| Version: | CSS3 |
| JavaScript syntax: | object.style.filter="grayscale(100%)"Try it |
Browser Support
The numbers in the table specify the first browser version that fully supports the property.
| Property | |||||
|---|---|---|---|---|---|
| filter | 53 | 13 | 35 | 9 | 40 |
CSS Syntax
filter: none | blur() | brightness() | contrast() | drop-shadow() | grayscale() | hue-rotate() | invert() | opacity() | saturate() | sepia() | url();
Tip: To use multiple filters, separate each filter with a space (See "More Examples" below).
Filter Functions
Note: The filters that use percentage values (i.e. 75%), also accept the value as decimal (i.e. 0.75).
| Filter | Description | Demo |
|---|---|---|
| none | Default value. Specifies no effects | Demo ❯ |
| blur(px) | Applies a blur effect to the image. A larger value will create more blur. If no value is specified, 0 is used. | Demo ❯ |
| brightness(%) | Adjusts the brightness of the image. 0% will make the image completely black. 100% (1) is default and represents the original image. Values over 100% will provide brighter results. Values under 100% will provide darker results. | Demo ❯ |
| contrast(%) | Adjusts the contrast of the image. 0% will make the image completely gray. 100% (1) is default, and represents the original image. Values over 100% increases the contrast. Values under 100% decreases the contrast. | Demo ❯ |
| drop-shadow(h-shadow v-shadow blur spread color) | Applies a drop shadow effect to the image. Possible values: h-shadow - Required. Specifies a pixel value for the horizontal shadow. Negative values place the shadow to the left of the image. v-shadow - Required. Specifies a pixel value for the vertical shadow. Negative values place the shadow above the image. blur - Optional. This is the third value, and must be in pixels. Adds a blur effect to the shadow. A larger value will create more blur (the shadow becomes bigger and lighter). Negative values are not allowed. If no value is specified, 0 is used (the shadow's edge is sharp). spread - Optional. This is the fourth value, and must be in pixels. Positive values will cause the shadow to expand and grow bigger, and negative values will cause the shadow to shrink. If not specified, it will be 0 (the shadow will be the same size as the element). Note: Chrome, Safari and Opera, and maybe other browsers, do not support this 4th length; it will not render if added. color - Optional. Adds a color to the shadow. If not specified, the color depends on the browser (often black). An example of creating a red shadow, which is 8px big both horizontally and vertically, with a blur effect of 10px: filter: drop-shadow(8px 8px 10px red); Tip: This filter is similar to thebox-shadow property. | Demo ❯ |
| grayscale(%) | Converts the image to grayscale. 0% (0) is default and represents the original image. 100% will make the image completely grayscale Note: Negative values are not allowed. | Demo ❯ |
| hue-rotate(deg) | Applies a hue rotation on the image. The value defines the number of degrees around the color circle the image samples will be adjusted. 0deg is default, and represents the original image. Note: Maximum value is 360deg. | Demo ❯ |
| invert(%) | Inverts the samples in the image. 0% (0) is default and represents the original image. 100% will make the image completely inverted. Note: Negative values are not allowed. | Demo ❯ |
| opacity(%) | Sets the opacity level for the image. The opacity-level describes the transparency-level, where: 0% is completely transparent. 100% (1) is default and represents the original image (no transparency). Note: Negative values are not allowed. Tip: This filter is similar to theopacity property. | Demo ❯ |
| saturate(%) | Saturates the image. 0% (0) will make the image completely un-saturated. 100% is default and represents the original image. Values over 100% provides super-saturated results. Note: Negative values are not allowed. | Demo ❯ |
| sepia(%) | Converts the image to sepia. 0% (0) is default and represents the original image. 100% will make the image completely sepia. Note: Negative values are not allowed. | Demo ❯ |
| url() | The url() function takes the location of an XML file that specifies an SVG filter, and may include an anchor to a specific filter element. Example: filter: url(svg-url#element-id) | |
| initial | Sets this property to its default value.Read aboutinitial | |
| inherit | Inherits this property from its parent element.Read aboutinherit |
More Examples
Blur Example 2
Apply a blurred background image:
img.background {
filter: blur(35px);
}
Try it Yourself »filter: blur(35px);
}
Brightness Example
Adjust the brightness of the image:
img {
filter: brightness(200%);
}
Try it Yourself »filter: brightness(200%);
}
Drop Shadow Example
Apply a drop shadow effect to the image:
img {
filter: drop-shadow(8px 8px 10px gray);
}
Try it Yourself »filter: drop-shadow(8px 8px 10px gray);
}
Hue Rotation Example
Apply a hue rotation on the image:
img {
filter: hue-rotate(90deg);
}
Try it Yourself »filter: hue-rotate(90deg);
}
Using Multiple Filters
To use multiple filters, separate each filter with a space. Notice that the order is important (i.e. using grayscale() after sepia() will result in a completely gray image):
img {
filter: contrast(200%) brightness(150%);
}
Try it Yourself »filter: contrast(200%) brightness(150%);
}
All Filters
A demonstration of all filter functions:
.blur {
filter: blur(4px);
}
.brightness {
filter: brightness(0.30);
}
.contrast {
filter: contrast(180%);
}
.grayscale {
filter: grayscale(100%);
}
.huerotate {
filter: hue-rotate(180deg);
}
.invert {
filter: invert(100%);
}
.opacity {
filter: opacity(50%);
}
.saturate {
filter: saturate(7);
}
.sepia {
filter: sepia(100%);
}
.shadow {
filter: drop-shadow(8px 8px 10px green);
}
Try it Yourself »filter: blur(4px);
}
.brightness {
filter: brightness(0.30);
}
.contrast {
filter: contrast(180%);
}
.grayscale {
filter: grayscale(100%);
}
.huerotate {
filter: hue-rotate(180deg);
}
.invert {
filter: invert(100%);
}
.opacity {
filter: opacity(50%);
}
.saturate {
filter: saturate(7);
}
.sepia {
filter: sepia(100%);
}
.shadow {
filter: drop-shadow(8px 8px 10px green);
}
Related Pages
CSS Tutorial:CSS Images
HTML DOM reference:filter property
