3.1.Principles

The RD is primarily a tool to make discovery operations moreefficient than querying/.well-known/core on all connected devices or acrossboundaries that would limit those operations.¶

It provides information about resources hosted by other devices that could otherwise only be obtained bydirectly querying the/.well-known/core resource on these other devices, either by a unicast request or a multicast request.¶

InformationSHOULD only be stored in the RDif it can be obtained by querying the described device's/.well-known/core resource directly.¶

Data in the RD can only be provided by thedevice that hosts the data or a dedicated Commissioning Tool (CT).These CTs act on behalf of endpoints too constrained, or generallyunable, to present that information themselves. No other client can modify datain the RD. Changes to the information in the RD do not propagate automatically back to the web servers from where the information originated.¶

3.2.Architecture

The RD architecture is illustrated inFigure 1. AnRD is used as a repository of registrationsdescribing resources hosted on other web servers, also called endpoints(EPs).An endpoint is a web server associated with a scheme, IP address, and port. A physical node may host one or more endpoints. TheRD implements a set of REST interfaces for endpoints to register and maintainRD registrations and for endpoints tolook up resources from the RD. An RD can be logically segmented by the use of sectors.¶

A mechanism to discover an RD using CoRE Link Format[RFC6690] is defined.¶

Registrations in the RD are soft state and need to be periodically refreshed.¶

An endpoint uses specific interfaces to register, update, and remove a registration. It is also possible for an RD to fetch web linksfrom endpoints and add their contents to its registrations.¶

At the first registration of an endpoint, a "registration resource" is created,the location of which is returned to the registering endpoint. The registeringendpoint uses this registration resource to manage the contents of registrations.¶

A lookup interface for discovering any of the web links stored in the RD isprovided using the CoRE Link Format.¶

           Registration         Lookup            Interface         Interface+----+          |                 || EP |----      |                 |+----+    ----  |                 |              --|-    +------+    |+----+          | ----|      |    |     +--------+| EP | ---------|-----|  RD  |----|-----| Client |+----+          | ----|      |    |     +--------+              --|-    +------+    |+----+    ----  |                 || CT |----      |                 |+----+

A registrant-EPMAY keep concurrent registrations to more than one RD at the same timeif explicitly configured to do so,but that is not expected to be supported by typical EP implementations.Any such registrations are independent of each other.The usual expectation when multiple discovery mechanisms or addresses are configuredis that they constitute a fall-back path for a single registration.¶

3.3.RD Content Model

The Entity-Relationship (ER) models shown in Figures2 and3 model the contents of/.well-known/core and the RD respectively, with entity-relationship diagrams[ER]. Entities (rectangles) are used for concepts that exist independently. Attributes (ovals) are used for concepts that exist only in connection with a related entity. Relations (diamonds) give a semantic meaning to the relation between entities. Numbers specify the cardinality of the relations.¶

Some of the attribute values are URIs. Those values are always full URIs and never relative references in the information model.However, they can be expressed as relative references in serializations, and they often are.¶

These models provide an abstract view of the information expressed in link-format documents and an RD. They cover the concepts but not necessarily all details of an RD's operation; they are meant to give an overview and not be a template for implementations.¶

           +----------------------+           |   /.well-known/core  |           +----------------------+                      |                      | 1              ////////\\\\\\\             <    contains   >              \\\\\\\\///////                      |                      | 0+            +--------------------+            |      link          |            +--------------------+                      |                      |  1   oooooooo                      +-----o target o                      |      oooooooo oooooooooooo   0+    |o    target  o--------+o  attribute o        | 0+   oooooo oooooooooooo         +-----o rel  o                      |      oooooo                      |                      | 1    ooooooooo                      +-----o context o                             ooooooooo

Figure 2 models the contents of/.well-known/core, which contains a set of links belonging to the hosting web server.¶

The web server is free to choose links it deems appropriate to be exposed in its/.well-known/core.Typically, the links describe resources that are served by the host, but the set can also contain links to resources on other servers (see examples inSection 5 of [RFC6690]).The set does not necessarily contain links to all resources served by the host.¶

A link has the following attributes (seeSection 5 of [RFC8288]):¶

• Zero or more link relations: They describe relations between the link context and the link target.¶

  In link-format serialization, they are expressed as space-separated values in the "rel" attribute and default to "hosts".¶

• A link context URI: It defines the source of the relation, e.g.,who "hosts" something.¶

  In link-format serialization, it is expressed in the "anchor" attribute and defaults to the Origin of the target (practically, the target with its path and later components removed).¶

• A link target URI: It defines the destination of the relation (e.g.,what is hosted) and is the topic of all target attributes.¶

  In link-format serialization, it is expressed between angular brackets and sometimes called the "href".¶

• Other target attributes (e.g., resource type (rt), interface (if), or content format (ct)): These provide additional information about the target URI.¶

                 +--------------+                 +      RD      +                 +--------------+                        | 1                        |                        |                        |                        |                   //////\\\\                  < contains >                   \\\\\/////                        |                     0+ | ooooooo     1  +---------------+o  base o-------|  registration | ooooooo        +---------------+                    |       | 1                    |       +--------------+       oooooooo   1 |                      |      o  href  o----+                 /////\\\\       oooooooo     |                < contains >                    |                 \\\\\/////       oooooooo   1 |                      |      o   ep   o----+                      | 0+       oooooooo     |             +------------------+                    |             |      link        |       oooooooo 0-1 |             +------------------+      o    d   o----+                      |       oooooooo     |                      |  1   oooooooo                    |                      +-----o target o       oooooooo   1 |                      |      oooooooo      o   lt   o----+     ooooooooooo   0+ |       oooooooo     |    o  target   o-----+                    |    o attribute o     | 0+   oooooo    ooooooooooo 0+  |     ooooooooooo      +-----o rel  o   o  endpoint o----+                      |      oooooo   o attribute o                           |    ooooooooooo                            | 1   ooooooooo                                           +----o context o                                                 ooooooooo

Figure 3 models the contents of the RD, which contains, in addition to/.well-known/core, 0 to n registrations of endpoints.¶

A registration is associated with one endpoint. A registration defines a set of links, as defined for/.well-known/core. A registration has six types of attributes:¶

• an endpoint name ("ep", a Unicode string) unique within a sector¶
• a registration base URI ("base", a URI typically describing the scheme://authority part)¶
• a lifetime ("lt")¶
• a registration resource location inside the RD ("href")¶
• optionally, a sector ("d", a Unicode string)¶
• optional additional endpoint attributes (fromSection 9.3)¶

The cardinality of "base" is currently 1;future documents are invited to extend the RD specification to support multiple values (e.g.,[COAP-PROT-NEG]).Its value is used as a base URI when resolving URIs in the links contained in the endpoint.¶

Links are modeled as they are inFigure 2.¶

3.4.Link-Local Addresses and Zone Identifiers

Registration base URIs can contain link-local IP addresses. To be usable across hosts, those cannot be serialized to contain zone identifiers (see[RFC6874],Section 1).¶

Link-local addresses can only be used on a single link(therefore, RD servers cannot announce them when queried on a different link),and lookup clients using them need to keep track of which interface they got them from.¶

Therefore, it is advisable in many scenariosto use addresses with larger scopes, if available.¶

3.5.Use Case: Cellular M2M

Over the last few years, mobile operators around the worldhave focused on development of M2M solutions in order toexpand the business to the new type of users: machines. Themachines are connected directly to a mobile network using an appropriateembedded wireless interface (GSM/General Packet Radio Service (GPRS), Wideband Code Division Multiple Access (W-CDMA), LTE, etc.) or via a gateway providingshort- and wide-range wireless interfaces.The ambition in such systems is to build them from reusable components.These speed up development and deploymentand enable shared use of machines across different applications.One crucial component of such systemsis the discovery of resources (and thus the endpoints they are hosted on) capable of providing requiredinformation at a given time or acting on instructions from the end users.¶

Imagine a scenario where endpoints installed on vehicles enabletracking of the position of these vehicles for fleet management purposes and allowmonitoring of environment parameters. During the boot-up process,endpoints register with an RD, which is hosted by themobile operator or somewhere in the cloud. Periodically, these endpointsupdate their registration and may modify resources they offer.¶

When endpoints are not always connected, for example, because they entera sleep mode, a remote server is usually used to provide proxy access tothe endpoints. Mobile apps or web applications for environment monitoring contact the RD, look up the endpoints capable of providing information about the environment using an appropriate set of link parameters, obtain information on how to contact them (URLs of the proxy server), and then initiate interaction to obtain information that is finally processed, displayed on the screen, and usually stored in a database. Similarly, fleet management systems providethe appropriate link parameters to the RD to look up for EPs deployed onthe vehicles the application is responsible for.¶

3.6.Use Case: Home and Building Automation

Home and commercial building automation systems can benefit from the useof IoT web services. The discovery requirements of these applications aredemanding. Home automation usually relies on run-time discovery to commissionthe system, whereas, in building automation, a combination of professionalcommissioning and run-time discovery is used. Both home and building automationinvolve peer-to-peer interactions between endpoints and involve battery-poweredsleeping devices.Both can use the common RD infrastructure to establish device interactions efficientlybut can pick security policies suitable for their needs.¶

Two phases can be discerned for a network servicing the system: (1) installation and (2) operation. During the operational phase, the network is connected to the Internet with a border router (e.g., a 6LoWPAN Border Router (6LBR)[RFC6775]), and the nodes connected to the network can use the Internet services that are provided by the IP or network administrator. During the installation phase, the network is completely stand-alone, no border router is connected, and the network only supports the IP communication between the connected nodes. The installation phase is usually followed by the operational phase.As an RD's operations work without hard dependencies on names or addresses,it can be used for discovery across both phases.¶

3.7.Use Case: Link Catalogues

Resources may be shared through data brokers that have no knowledge beforehandof who is going to consume the data. An RD can be used to holdlinks about resources and services hosted anywhere to make them discoverableby a general class of applications.¶

For example, environmental and weather sensors that generate data for publicconsumption may provide data to an intermediary server or broker. Sensordata are published to the intermediary upon changes or at regular intervals.Descriptions of the sensors that resolve to links to sensor data may be publishedto an RD. Applications wishing to consume the data can useRD lookup to discover and resolve linksto the desired resources and endpoints. The RD service neednot be coupled with the data intermediary service. Mapping of RDsto data intermediaries may be many-to-many.¶

Metadata in web link formats, such as the one defined in[RFC6690], which may be internally stored as triples or relation/attributepairs providing metadata about resource links, need to be supported by RDs. External catalogues that arerepresented in other formats may be converted to common web linking formats forstorage and access by RDs. Since it is common practice for theseto be encoded in URNs[RFC8141], simple and lossless structural transforms shouldgenerally be sufficient to store external metadata in RDs.¶

The additional features of an RD allow sectors to be definedto enable access to a particular set of resources from particular applications.This provides isolation and protection of sensitive data when needed. Application groups with multicast addresses may be defined to support efficient data transport.¶

4.1.Finding a Resource Directory

A (re)starting device may want to find one or more RDsbefore it can discover their URIs. Dependent on the operational conditions, one or more of the techniques below apply.¶

The device may be preconfigured to exercise specific mechanisms forfinding the RD:¶

1. It may be configured with a specific IP address for the RD. That IPaddress may also be an anycast address, allowing the network toforward RD requests to an RD that is topologically close; eachtarget network environment in which some of these preconfigurednodes are to be brought up is then configured with a route for thisanycast address that leads to an appropriate RD. (Instead of usingan anycast address, a multicast address can also be preconfigured.The RD servers then need to configure one of theirinterfaces with this multicast address.)¶
2. It may be configured with a DNS name for the RD and use DNS to returnthe IP address of the RD; it can find a DNS server to perform the lookup using the usual mechanisms for finding DNS servers.¶
3. It may be configured to use a service discovery mechanism, such asDNS-based Service Discovery (DNS-SD), as outlined inSection 4.1.2.¶

For cases where the device is not specifically configured with a wayto find an RD, the network may want to provide asuitable default.¶

1. The IPv6 Neighbor Discovery option RDAO (Section 4.1.1) can do that.¶
2. When DHCP is in use,this could be provided via a DHCP option (no such option is definedat the time of writing).¶

Finally, if neither the device nor the network offers any specificconfiguration, the device may want to employ heuristics to find asuitable RD.¶

The present specification does not fully define these heuristics butsuggests a number of candidates:¶

1. In a 6LoWPAN, just assume the 6LBR can act as anRD (using the Authoritative Border Router Option (ABRO) to find that[RFC6775]).Confirmation can be obtained by sending a unicast GET tocoap://[6LBR]/.well-known/core?rt=core.rd*.¶
2. In a network that supports multicast well, discover the RD usinga multicast query for/.well-known/core, as specified in CoRE LinkFormat[RFC6690], and send a Multicast GET tocoap://[ff0x::fe]/.well-known/core?rt=core.rd*. RDs within themulticast scope will answer the query.¶

When answering a multicast request directed at a link-local group, the RD may want to respond from a routable address; this makes it easier for registrants to use one of their own routable addresses for registration.When source addresses are selected using the mechanism described in[RFC6724],this can be achieved by applying the changes of its Section10.4,picking public addresses in Rule 7 of its Section5,and superseding Rule 8 with preferring the source address's precedence.¶

As some of the RD addresses obtained by the methods listed here arejust (more or less educated) guesses, endpointsMUST make use of anyerror messages to very strictly rate-limit requests to candidate IPaddresses that don't work out. For example, an ICMP DestinationUnreachable message (and, in particular, the port unreachable code forthis message) may indicate the lack of a CoAP server on the candidatehost, or a CoAP error response code, such as 4.05 (Method Not Allowed),may indicate unwillingness of a CoAP server to act as a directoryserver.¶

The following RD discovery mechanisms are recommended:¶

• In managed networks with border routers that need stand-alone operation, the RDAO is recommended (e.g., the operational phase described inSection 3.6).¶
• In managed networks without border routers (no Internet services available), the use of a preconfigured anycast address is recommended (e.g., the installation phase described inSection 3.6).¶
• In networks managed using DNS-SD, the use of DNS-SD for discovery, as described inSection 4.1.2, is recommended.¶

The use of multicast discovery in mesh networks isNOT RECOMMENDED.¶

0                   1                   2                   30 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+|     Type      |  Length = 3   |          Reserved             |+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+|                        Valid Lifetime                         |+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+|                                                               |+                                                               +|                                                               |+                          RD Address                           +|                                                               |+                                                               +|                                                               |+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+

4.2.Payload Content Formats

RDs implementing this specificationMUST support theapplication/link-format content format (ct=40).¶

RDs implementing this specificationMAY support additional content formats.¶

Any additional content format supported by an RD implementing thisspecificationSHOULD be able to express all the information expressible in link format.ItMAY be able to express information that is inexpressible in link format,but those expressionsSHOULD be avoided where possible.¶

4.3.URI Discovery

Before an endpoint can make use of an RD, it must first know the RD's addressand port and the URI path information for its REST APIs. This section definesdiscovery of the RD and its URIs using the well-known interface of theCoRE Link Format[RFC6690] after having discovered a host, as described inSection 4.1.¶

Discovery of the RD registration URI is performed by sending either a multicast orunicast GET request to/.well-known/core and including a resource type (rt)parameter[RFC6690] with the value "core.rd" in the query string. Likewise, aresource type parameter value of "core.rd-lookup*" is used to discover theURIs for RD lookup operations, and "core.rd*" is used to discover all URIs for RD operations.Upon success, the response will contain a payload witha link format entry for each RD function discovered, indicating the URIof the RD function returned and the corresponding resource type. When performingmulticast discovery, the multicast IP address used will depend on the scope requiredand the multicast capabilities of the network (seeSection 9.5).¶

An RDMAY provide hints about the content formats it supports in the links it exposes or registers, using the "ct" target attribute, as shown in the example below. ClientsMAY use these hints to select alternate content formats for interaction with the RD.¶

HTTP does not support multicast, and, consequently, only unicast discovery can be supported using the HTTP/.well-known/core resource.¶

RDs implementing this specificationMUST support query filtering forthe rt parameter, as defined in[RFC6690].¶

While the link targets in this discovery step are often expressed in path-absolute form,this is not a requirement.Clients of the RDSHOULD therefore accept URIs of all schemes they support,both as URIs and relative references,and not limit the set of discovered URIs to those hosted at the address used for URI discovery.¶

With security policies where the client requires the RD to be authorized to act as an RD,that authorization may be limited to resources on which the authorized RD advertises the adequate resource types.Clients that have obtained links they cannot rely on yetcan repeat the "URI discovery" step at the/.well-known/core resource of the indicated hostto obtain the resource type information from an authorized source.¶

The URI discovery operation can yield multiple URIs of a given resource type.The client of the RD can try out any of the discovered addresses.¶

The discovery request interface is specified as follows(this is exactly the well-known interface of[RFC6690],Section 4, with the additional requirement that the serverMUST support query filtering):¶

Interaction:

EP, CT, or Client -> RD¶

Method:

GET¶

URI Template:

/.well-known/core{?rt}¶

URI Template Variables:

rt :=

Resource Type.SHOULD contain one of the values "core.rd", "core.rd-lookup*", "core.rd-lookup-res", "core.rd-lookup-ep", or "core.rd*"¶

Accept:

absent,application/link-format, or any other media type representing web links¶

The following response is expected on this interface:¶

Success:

2.05 (Content) or 200 (OK) with anapplication/link-format or other web link payload containing one or more matching entries for the RD resource.¶

The following example shows an endpoint discovering an RD using this interface,thus learning that the directory resource location in this example is /rd and that thecontent format delivered by the server hosting the resource isapplication/link-format (ct=40). Note that it is up to the RD to choose its RD locations.¶

Req: GET coap://[ff02::fe]/.well-known/core?rt=core.rd*Res: 2.05 ContentPayload:</rd>;rt=core.rd;ct=40,</rd-lookup/ep>;rt=core.rd-lookup-ep;ct=40,</rd-lookup/res>;rt=core.rd-lookup-res;ct=40

The following example shows the way of indicating that a client may request alternate content formats. The Content-Format code attribute "ct"MAY include a space-separated sequence of Content-Format codes, as specified inSection 7.2.1 of [RFC7252], indicating that multiple content formats are available. The example below shows the required Content-Format 40 (application/link-format) indicated, as well as Concise Binary Object Representation (CBOR) and JSON representations in the style of[CORE-LINKS-JSON] (for which the experimental values 65060 and 65050 are used in this example). The RD resource locations /rd and /rd-lookup are example values. The server in this example also indicates that it is capable of providing observation on resource lookups.¶

Req: GET coap://[ff02::fe]/.well-known/core?rt=core.rd*Res: 2.05 ContentPayload:</rd>;rt=core.rd;ct=40,</rd-lookup/res>;rt=core.rd-lookup-res;ct="40 65060 65050";obs,</rd-lookup/ep>;rt=core.rd-lookup-ep;ct="40 65060 65050"

For maintenance, management, and debugging,it can be useful to identify the components that constitute the RD server.The identification can be used to find client-server incompatibilities,supported features, required updates, and other aspects.The well-known interface described inSection 4 of [RFC6690] can be used to find such data.¶

It would typically be stored in an implementation information link(as described in[T2TRG-REL-IMPL]).¶

Req: GET /.well-known/core?rel=impl-infoRes: 2.05 ContentPayload:<http://software.example.com/shiny-resource-directory/1.0beta1>;    rel=impl-info

Note that, depending on the particular server's architecture,such a link could be anchored at the RD server's root(as in this example) orat individual RD components.The latter is to be expected when different applicationsare run on the same server.¶

5.1.Simple Registration

Not all endpoints hosting resources are expected to know how to upload links to an RD, as described inSection 5. Instead, simple endpoints can implement the simple registration approach described in this section. An RD implementing this specificationMUST implement simple registration. However, there maybe security reasons why this form of directory discovery would be disabled.¶

This approach requires that the registrant-EP makes available the hosted resourcesthat it wants to be discovered as links on its/.well-known/core interface, asspecified in[RFC6690].The links in that document are subject to the same limitations as the payload of a registration(with respect toAppendix C).¶

• The registrant-EP finds one or more addresses of the directory server, as described inSection 4.1.¶

• The registrant-EP sends (and regularly refreshes with) a POST request to the/.well-known/rd URI of the directory server of choice. The body of the POST request is empty and triggers the resource directory server to perform GET requests (redone before lifetime expiry) at the requesting registrant-EP's/.well-known/core to obtain the link-format payload to register.¶

  The registrant-EP includes the same registration parameters in the POST request as it would with a regular registration, perSection 5. The registration base URI of the registration is taken from the registrant-EP's network address (as is default with regular registrations).¶

  The following is an example request from the registrant-EP to the RD (unanswered until the next step):¶

  Req: POST /.well-known/rd?lt=6000&ep=node1(No payload)

• The RD queries the registrant-EP's discovery resource to determine the success of the operation. ItSHOULD keep a cache of the discovery resource and not query it again as long as it is fresh.¶

  The following is an example request from the RD to the registrant-EP:¶

  Req: GET /.well-known/coreAccept: 40Res: 2.05 ContentContent-Format: 40Payload:</sen/temp>

With this response, the RD would answer the previous step's request:¶

Res: 2.04 Changed

The sequence of fetching the registration content before sending a successful responsewas chosen to make responses reliable,and the point about caching was chosen to still allow very constrained registrants.RegistrantsMUST be able to serve a GET request to/.well-known/core after having requested registration.Constrained devicesMAY regard the initial request as temporarily failed when they need RAM occupied by their own request to serve the RD's GETand retry later when the RD already has a cached representation of their discovery resources.Then, the RD can reply immediately, and the registrant can receive the response.¶

The simple registration request interface is specified as follows:¶

Interaction:

EP -> RD¶

Method:

POST¶

URI Template:

/.well-known/rd{?ep,d,lt,extra-attrs*}¶

URI Template Variables are the same as for registration inSection 5.The base attribute is not accepted to keep the registration interface simple;that rules out registration over CoAP-over-TCP or HTTP that would need to specify one.For some time during this document's development, the URI Template/.well-known/core{?ep,...} was in use instead.¶

The following response is expected on this interface:¶

Success:

2.04 (Changed)¶

For the second interaction triggered by the above, the registrant-EP takes the role of server and the RD takes the role of client. (Note that this is exactly the well-known interface of[RFC6690],Section 4):¶

Interaction:

RD -> EP¶

Method:

GET¶

URI Template:

/.well-known/core¶

The following response is expected on this interface:¶

Success:

2.05 (Content)¶

When the RD uses any authorization credentials to access the endpoint's discovery resource or when it is deployed in a location where third parties might reach it but not the endpoint, itSHOULD verify that the apparent registrant-EP intends to register with the given registration parameters before revealing the obtained discovery information to lookup clients. An easy way to do that is to verify the simple registration request's sender address using the Echo option, as described in[RFC9175],Section 2.4.¶

The RDMUST delete registrations created by simple registration after the expiration of their lifetime. Additional operations on the registration resource cannot be executed because no registration location is returned.¶

5.2.Third-Party Registration

For some applications, even simple registration may be too taxingfor some very constrained devices, in particular, if the security requirementsbecome too onerous.¶

In a controlled environment (e.g., building control), the RDcan be filled by a third-party device, called a Commissioning Tool (CT). The CT can fill the RD from a database or other means. Forthat purpose scheme, the IP address and port of the URI of the registered device is the value of the "base" parameter of the registration described inSection 5.¶

It should be noted that the value of the "base" parameter applies to all the links of the registration and has consequences for the anchor value of the individual links, as exemplified inAppendix B. A potential (currently nonexistent) "base" attribute of the link is not affected by the value of "base" parameter in the registration.¶

5.3.Operations on the Registration Resource

This section describes how the registering endpoint can maintain the registrations that it created. The registering endpoint can be the registrant-EP or the CT. The registrations are resources of the RD.¶

An endpoint should not use this interface for registrations that it did not create. This is usually enforced by security policies, which, in general, require equivalent credentials for creation of and operations on a registration.¶

After the initial registration, the registering endpoint retains the returned location of the registration resource for further operations, including refreshing the registration in order to extend the lifetime and "keep-alive" the registration. When the lifetime of the registration has expired, the RDSHOULD NOT respond to discovery queries concerning this endpoint. The RDSHOULD continue to provide access to the registration resource after a registration timeout occurs in order to enable the registering endpoint to eventually refresh the registration. The RDMAY eventually remove the registration resource for the purpose of garbage collection. If the registration resource is removed, the corresponding endpoint will need to be reregistered.¶

The registration resource may also be used to cancel the registration using DELETE and to perform further operations beyond the scope of this specification.¶

Operations on the registration resource are sensitive to reordering;Section 5.3.4 describes how order is restored.¶

The operations on the registration resource are described below.¶

Req: POST /rd/4521Res: 2.04 Changed

Req: GET /rd-lookup/res?ep=endpoint1Res: 2.05 ContentPayload:<coap://local-proxy-old.example.com/sensors/temp>;    rt=temperature-c;if=sensor,<http://www.example.com/sensors/temp>;    anchor="coap://local-proxy-old.example.com/sensors/temp";    rel=describedby

Req: POST /rd/4521?base=coaps://new.example.comRes: 2.04 Changed

Req: GET /rd-lookup/res?ep=endpoint1Res: 2.05 ContentPayload:<coaps://new.example.com/sensors/temp>;    rt=temperature-c;if=sensor,<http://www.example.com/sensors/temp>;    anchor="coaps://new.example.com/sensors/temp";    rel=describedby

Req: DELETE /rd/4521Res: 2.02 Deleted

Req: POST /rd/4521?lt=7200Res: 4.01 UnauthorizedEcho: 0x0123(EP tries again immediately.)Req: POST /rd/4521?lt=7200Echo: 0x0123Res: 2.04 ChangedEcho: 0x0124(Later, the EP regains its confidence in its long-term reachability.)Req: POST /rd/4521?lt=90000Echo: 0x0124Res: 2.04 ChangedEcho: 0x0247

6.1.Resource Lookup

Resource lookup results in links that are semantically equivalent to the links submitted to the RD by the registrant.The links and link parameters returned by the lookup are equal to the originally submitted ones,except that the target reference is fully resolvedand that the anchor reference is fully resolved if it is present in the lookup result at all.¶

Links that did not have an anchor attribute in the registration are returned without an anchor attribute.Links of which href or anchor was submitted as a (full) URI are returned with the respective attribute unmodified.¶

The above rules allow the client to interpret the response as links without any further knowledge of the storage conventions of the RD.The RDMAY replace the registration base URIs with a configured intermediate proxy, e.g., in the case of an HTTP lookup interface for CoAP endpoints.¶

If the base URI of a registration contains a link-local address,the RDMUST NOT show its links unless the lookup was made from thelink on which the registered endpoint can be reached.The RDMUST NOT include zone identifiers in the resolved URIs.¶

6.2.Lookup Filtering

Using the Accept option, the requester can control whether the returned list is returned in CoRE Link Format (application/link-format, default) or in alternate content formats (e.g., from[CORE-LINKS-JSON]).¶

Multiple search criteriaMAY be included in a lookup. All included criteriaMUST match for a link to be returned. The RDMUST support matching with multiple search criteria.¶

A link matches a search criterion if it has an attribute of the same name and the same value, allowing for a trailing "*" wildcard operator, as inSection 4.1 of [RFC6690]. Attributes that are defined asrelation-types (in the link-format ABNF) match if the search value matches any of their values (seeSection 4.1 of [RFC6690]; for example,?if=tag:example.net,2020:sensor matches;if="example.regname tag:example.net,2020:sensor";. A resource link also matches a search criterion if its endpoint would match the criterion, and vice versa, an endpoint link matches a search criterion if any of its resource links matches it.¶

Note thathref is a valid search criterion and matches target references. Like all search criteria, on a resource lookup, it can match the target reference of the resource link itself but also the registration resource of the endpoint that registered it.Queries for resource link targetsMUST be in URI form (i.e., not relative references) and are matched against a resolved link target. Queries for endpointsSHOULD be expressed in path-absolute form if possible andMUST be expressed in URI form otherwise; the RDSHOULD recognize either.Theanchor attribute is usable for resource lookups and, if queried,MUST be in URI form as well.¶

Additional query parameters "page" and "count" are used to obtain lookup results in specified increments using pagination, where count specifies how many links to return and page specifies which subset of links organized in sequential pages, each containing 'count' links, starting with link zero and page zero. Thus, specifying a count of 10 and page of 0 will return the first 10 links in the result set (links 0-9). Specifying a count of 10 and page of 1 will return the next 'page' containing links 10-19, and so on.Unlike block-wise transfer of a complete result set,these parameters ensure that each chunk of results can be interpreted on its own.This simplifies the processingbut can result in duplicate or missed items when coinciding with changes from the registration interface.¶

Endpoints that are interested in a lookup result repeatedly or continuously can usemechanisms such as ETag caching, resource observation[RFC7641],or any future mechanism that might allow more efficient observations of collections.These are advertised, detected, and used according to their own specificationsand can be used with the lookup interface as with any other resource.¶

When resource observation is used,every time the set of matching links changes or the content of a matching link changes, the RD sends a notification with the matching link set.The notification contains the successful current response to the given request,especially with respect to representing zero matching links(see "Success" item below).¶

The lookup interface is specified as follows:¶

Interaction:

Client -> RD¶

Method:

GET¶

URI Template:

{+type-lookup-location}{?page,count,search*}¶

URI Template Variables:

type-lookup-location :=

RD lookup URI for a given lookup type (mandatory). The address is discovered as described inSection 4.3.¶

search :=

Search criteria for limiting the number of results (optional). The search criteria are an associative array, expressed in a form-style query, as per the URI Template (see[RFC6570], Sections2.4.2 and3.2.8).¶

page :=

Page (optional). This parameter cannot be used without the count parameter. Results are returned from result set in pages that contain 'count' links starting from index (page * count). Page numbering starts with zero.¶

count :=

Count (optional). The number of results is limited to this parameter value. If the page parameter is also present, the responseMUST only include 'count' links starting with the (page * count) link in the result set from the query. If the count parameter is not present, then the responseMUST return all matching links in the result set. Link numbering starts with zero.¶

Accept:

absent,application/link-format, or any other indicated media type representing web links¶

The following responses codes are defined for this interface:¶

Success:

2.05 (Content) or 200 (OK) with anapplication/link-format or other web link payload containing matching entries for the lookup.¶

The payload can contain zero links (which is an empty payload in the link format described in[RFC6690] but could also be[] in JSON-based formats), indicating that no entities matched the request.¶

6.3.Resource Lookup Examples

The examples in this section assume the existence of CoAP hosts with a default CoAP port 61616. HTTP hosts are possible and do not change the nature of the examples.¶

The following example shows a client performing a resource lookup with the example resource lookup locations discovered inFigure 5:¶

Req: GET /rd-lookup/res?rt=tag:example.org,2020:temperatureRes: 2.05 ContentPayload:<coap://[2001:db8:3::123]:61616/temp>;    rt="tag:example.org,2020:temperature"

A client that wants to be notified of new resources as they show up can use this observation:¶

Req: GET /rd-lookup/res?rt=tag:example.org,2020:lightObserve: 0Res: 2.05 ContentObserve: 23Payload: empty(at a later point in time)Res: 2.05 ContentObserve: 24Payload:<coap://[2001:db8:3::124]/west>;rt="tag:example.org,2020:light",<coap://[2001:db8:3::124]/south>;rt="tag:example.org,2020:light",<coap://[2001:db8:3::124]/east>;rt="tag:example.org,2020:light"

The following example shows a client performing a paginated resource lookup:¶

Req: GET /rd-lookup/res?page=0&count=5Res: 2.05 ContentPayload:<coap://[2001:db8:3::123]:61616/res/0>;ct=60,<coap://[2001:db8:3::123]:61616/res/1>;ct=60,<coap://[2001:db8:3::123]:61616/res/2>;ct=60,<coap://[2001:db8:3::123]:61616/res/3>;ct=60,<coap://[2001:db8:3::123]:61616/res/4>;ct=60Req: GET /rd-lookup/res?page=1&count=5Res: 2.05 ContentPayload:<coap://[2001:db8:3::123]:61616/res/5>;ct=60,<coap://[2001:db8:3::123]:61616/res/6>;ct=60,<coap://[2001:db8:3::123]:61616/res/7>;ct=60,<coap://[2001:db8:3::123]:61616/res/8>;ct=60,<coap://[2001:db8:3::123]:61616/res/9>;ct=60

The following example shows a client performing a lookup of all resourcesof all endpoints of a given endpoint type. It assumes that two endpoints (with endpointnamessensor1 andsensor2) have previously registered with their respectiveaddresses (coap://sensor1.example.com andcoap://sensor2.example.com) andposted the very payload of the 6th response ofSection 5 of [RFC6690].¶

It demonstrates how absolute link targets stay unmodified, while relative onesare resolved:¶

Req: GET /rd-lookup/res?et=tag:example.com,2020:platformRes: 2.05 ContentPayload:<coap://sensor1.example.com/sensors>;ct=40;title="Sensor Index",<coap://sensor1.example.com/sensors/temp>;rt=temperature-c;if=sensor,<coap://sensor1.example.com/sensors/light>;rt=light-lux;if=sensor,<http://www.example.com/sensors/t123>;rel=describedby;    anchor="coap://sensor1.example.com/sensors/temp",<coap://sensor1.example.com/t>;rel=alternate;    anchor="coap://sensor1.example.com/sensors/temp",<coap://sensor2.example.com/sensors>;ct=40;title="Sensor Index",<coap://sensor2.example.com/sensors/temp>;rt=temperature-c;if=sensor,<coap://sensor2.example.com/sensors/light>;rt=light-lux;if=sensor,<http://www.example.com/sensors/t123>;rel=describedby;    anchor="coap://sensor2.example.com/sensors/temp",<coap://sensor2.example.com/t>;rel=alternate;    anchor="coap://sensor2.example.com/sensors/temp"

6.4.Endpoint Lookup

The endpoint lookup returns links to and information about registration resources, which themselves can only be manipulated by the registering endpoint.¶

Endpoint registration resources are annotated with their endpoint names (ep), sectors (d, if present), and registration base URI (base; reports the registrant-EP's address if no explicit base was given), as well as a constant resource type (rt="core.rd-ep"); the lifetime (lt) is not reported. Additional endpoint attributes are added as target attributes to their endpoint link unless their specification says otherwise.¶

Links to endpointsSHOULD be presented in path-absolute form or, if required, as (full) URIs. (This ensures that the output conforms to Limited Link Format, as described inAppendix C.)¶

Base addresses that contain link-local addressesMUST NOT include zone identifiers, and such registrationsMUST NOT be shown unless the lookup was made from the same link from which the registration was made.¶

While the endpoint lookup does expose the registration resources, the RD does not need to make them accessible to clients. ClientsSHOULD NOT attempt to dereference or manipulate them.¶

An RD can report registrations in lookup whose URI scheme and authority differ from that of the lookup resource. Lookup clientsMUST be prepared to see arbitrary URIs as registration resources in the results and treat them as opaque identifiers; the precise semantics of such links are left to future specifications.¶

The following example shows a client performing an endpoint lookup that is limited to endpoints of endpoint typetag:example.com,2020:platform:¶

Req: GET /rd-lookup/ep?et=tag:example.com,2020:platformRes: 2.05 ContentPayload:</rd/1234>;base="coap://[2001:db8:3::127]:61616";ep=node5;    et="tag:example.com,2020:platform";ct=40;rt=core.rd-ep,</rd/4521>;base="coap://[2001:db8:3::129]:61616";ep=node7;    et="tag:example.com,2020:platform";ct=40;d=floor-3;    rt=core.rd-ep

7.1.Endpoint Name

Whenever an RD needs to provide trustworthy results to clients doing endpoint lookupor resource lookup with filtering on the endpoint name,the RD must ensure that the registrant is authorized to use the given endpoint name.This applies both to registration and later to operations on the registration resource.It is immaterial whether the client is the registrant-EP itself or a CT is doing the registration.The RD cannot tell the difference, and CTs may use authorization credentials authorizing only operations on that particular endpoint name or a wider range of endpoint names.¶

It is up to the concrete security policy to describehow the endpoint name and sector are transported when certificates are used.For example, it may describe how SubjectAltName dNSName entries are mapped to endpoint and domain names.¶

7.2.Entered Links

When lookup clients expect that certain types of links can only originate from certain endpoints,then the RD needs to apply filtering to the links an endpoint may register.¶

For example, if clients use an RD to find a server that provides firmware updates,then any registrant that wants to register (or update) links to firmware sources will need to provide suitable credentials to do so, independently of its endpoint name.¶

Note that the impact of having undesirable links in the RD depends on the application.If the client requires the firmware server to present credentials as a firmware server,a fraudulent link's impact is limited to the client revealing its intention to obtain updates and slowing down the client until it finds a legitimate firmware server;if the client accepts any credentials from the server as long as they fit the provided URI, the impact is larger.¶

An RD may also require that links are only registered if the registrant is authorized to publish information about the anchor (or even target) of the link.One way to do this is to demand that the registrant present the same credentials in its role as a registering client that it would need to present in its role as a server when contacted at the resources' URI. These credentials may include using the address and port that are part of the URI.Such a restriction places severe practical limitations on the links that can be registered.¶

As above, the impact of undesirable links depends on the extent to which the lookup client relies on the RD.To avoid the limitations, RD applications should consider prescribing that lookup clients only use the discovered information as hintsand describe which pieces of information need to be verified because they impact the application's security.A straightforward way to verify such information is to request it again from an authorized server, typically the one that hosts the target resource.That is similar to what happens inSection 4.3 when the "URI discovery" step is repeated.¶

7.3.Link Confidentiality

When registrants publish information in the RD that is not available to any client that would query the registrant's/.well-known/core interface,or when lookups to that interface are subject to stricter firewalling than lookups to the RD,the RD may need to limit which lookup clients may access the information.¶

In this case, the endpoint (and not the lookup clients) needs to be careful to check the RD's authorization.The RD needs to check any lookup client's authorizationbefore revealing information directly (in resource lookup)or indirectly (when using it to satisfy a resource lookup search criterion).¶

7.4.Segmentation

Within a single RD, different security policies can apply.¶

One example of this are multi-tenant deployments separated by the sector (d) parameter.Some sectors might apply limitations on the endpoint names available,while others use a random identifier approach to endpoint names and place limits on the entered links based on their attributes instead.¶

Care must be taken in such setups to determine the applicable access control measures to each operation.One easy way to do that is to mandate the use of the sector parameter on all operations,as no credentials are suitable for operations across sector borders anyway.¶

7.5."First Come First Remembered": A Default Policy

The "First Come First Remembered" policy is provided both as a reference example for a security policy definition and as a policy that implementations may choose to use as default policy in the absence of any other configuration. It is designed to enable efficient discovery operations even in ad hoc settings.¶

Under this policy, the RD accepts registrations for any endpoint name that is not assigned to an active registration resourceand only accepts registration updates from the same endpoint.The policy is minimal in that it does not make any promises to lookup clients about the claims of Sections7.2 and7.3,and promises about the claims inSection 7.1 are limited to the lifetime of that endpoint's registration.It does however promise the endpoint that, for the duration of its registration, its links will be discoverable on the RD.¶

When a registration or operation is attempted, the RDMUST determine the client's subject name or public key:¶

• If the client's credentials indicate any subject name that is certified by any authority that the RD recognizes (which may be the system's trust anchor store), all such subject names are stored.With credentials based on CWT or JWT (as common with Authentication and Authorization for Constrained Environments (ACE)), the Subject (sub) claim is stored as a single name, if it exists.With X.509 certificates, the Common Name (CN) and the complete list of SubjectAltName entries are stored.In both cases, the authority that certified the claim is stored along with the subject, as the latter may only be locally unique.¶
• Otherwise, if the client proves possession of a private key, the matching public key is stored.This applies both to raw public keys and to the public keys indicated in certificates that failed the above authority check.¶
• If neither is present, a reference to the security session itself is stored.With (D)TLS, that is the connection itself or the session resumption information, if available.With OSCORE, that is the security context.¶

As part of the registration operation, that information is stored along with the registration resource.¶

The RDMUST accept all registrations whose registration resource is not already active,as long as they are made using a security layer supported by the RD.¶

Any operation on a registration resource,including registrations that lead to an existing registration resource,MUST be rejected by the RD unless all the stored information is found in the new request's credentials.¶

Note that, even though subject names are compared in this policy,they are never directly compared to endpoint names,and an endpoint cannot expect to "own" any particular endpoint name outside of an active registration --even if a certificate says so.It is an accepted shortcoming of this approach that the endpoint has no indication of whether the RD remembers it by its subject name or public key;recognition by subject happens on a best-effort basis (given the RD may not recognize any authority).ClientsMUST be prepared to pick a different endpoint name when rejected by the RD initially or after a change in their credentials;picking an endpoint name, as perSection 7.1.1, is an easy option for that.¶

For this policy to be usable without configuration, clients should not set a sector name in their registrations.An RD can set a default sector name for registrations accepted under this policy,which is especially useful in a segmented setup where different policies apply to different sectors.The configuration of such a behavior, as well as any other configuration applicable to such an RD(i.e., the set of recognized authorities),is out of scope for this document.¶

8.1.Discovery

Most steps in discovery of the RD, and possibly its resources, are not covered by CoAP's security mechanisms.This will not endanger the security properties of the registrations and lookup itself(where the client requires authorization of the RD if it expects any security properties of the operation)but may leak the client's intention to third partiesand allow them to slow down the process.¶

To mitigate that, clients can retain the RD's address,use secure discovery options (such as configured addresses),and send queries for RDs in a very general form (e.g.,?rt=core.rd* rather than?rt=core.rd-lookup-ep).¶

8.2.Endpoint Identification and Authentication

An endpoint (name, sector) pair is unique within the set of endpoints registered by the RD. An endpointMUST NOT be identified by its protocol, port, or IPaddress, as these may change over the lifetime of an endpoint.¶

Every operation performed by an endpoint on an RDSHOULD be mutually authenticated using a pre-shared key, a raw public key, orcertificate-based security.¶

Consider the following threat: two devices, A and B, are registered at a single server. Both devices have unique, per-device credentials for use with DTLS to make sure that only parties with authorization to access A or B can do so.¶

Now, imagine that a malicious device A wants to sabotage the device B. It uses its credentials during the DTLS exchange. Then, it specifies theendpoint name of device B as the name of its own endpoint in device A. If the server does not checkwhether the identifier provided in the DTLS handshake matches theidentifier used at the CoAP layer, then it may be inclined to use theendpoint name for looking up what information to provision to the malicious device.¶

Endpoint authorization needs to be checked on registration and registration resource operationsindependently of whether there are configured requirements on the credentials for a given endpoint name and sector (Section 7.1)or whether arbitrary names are accepted (Section 7.1.1).¶

Simple registration could be used to circumvent address-based access control.An attacker would send a simple registration request with the victim's address as the source addressand later look up the victim's/.well-known/core content in the RD.Mitigation for this is recommended inSection 5.1.¶

The registration resource path is visible to any client that is allowed endpoint lookupand can be extracted by resource lookup clients as well.The same goes for registration attributes that are shown as target attributes or lookup attributes.The RD needs to consider this in the choice of registration resource paths,as do administrators or endpoints in their choice of attributes.¶

8.3.Access Control

Access controlSHOULD be performed separately for the RD registration and lookupAPI paths, as different endpoints may be authorized to registerwith an RD from those authorized to look up endpoints from the RD. Such accesscontrolSHOULD be performed in as fine-grained a level as possible. For example,access control for lookups could be performed either at the sector, endpoint,or resource level.¶

The precise access controls necessary (and the consequences of failure to enforce them)depend on the protection objectives of the application and the security policies (Section 7) derived from them.¶

8.4.Denial-of-Service Attacks

Services that run over UDP unprotected are vulnerable to unknowinglyamplify and distribute a DoS attack, as UDP does not require a returnroutability check.Since RD lookup responses can be significantlylarger than requests, RDs are prone to this.¶

[RFC7252] describes this at length in its Section11.3,including some mitigation by using small block sizes in responses.[RFC9175] updates thatby describing a source address verification mechanism using the Echo option.¶

8.5.Skipping Freshness Checks

When RD-based applications are built in which request freshness checks are not performed,these concerns need to be balanced:¶

• When alterations to registration attributes are reordered,an attacker may create any combination of attributes ever set,with the attack difficulty determined by the security layer's replay properties.¶

  For example, ifFigure 18 were conducted without freshness assurances,an attacker could later reset the lifetime back to 7200.Thus, the device is made unreachable to lookup clients.¶

• When registration updates without query parameters (which just serve to restart the lifetime) can be reordered, an attacker can use intercepted messages to give the appearance of the device being alive to the RD.¶

  This is unacceptable when the RD's security policy promises reachability of endpoints (e.g., when disappearing devices would trigger further investigation) but may be acceptable with other policies.¶

9.1.Resource Types

IANA has added the following values to the "Resource Type (rt=) Link Target Attribute Values" subregistry of the "Constrained RESTful Environments (CoRE) Parameters" registry defined in[RFC6690]:¶

9.2.IPv6 ND Resource Directory Address Option

IANA has registered one new ND option type in the "IPv6 Neighbor Discovery Option Formats" subregistry of the "Internet Control Message Protocol version 6 (ICMPv6) Parameters" registry:¶

9.3.RD Parameters Registry

This specification defines a new subregistry for registration and lookup parameters called "RD Parameters" within the "Constrained RESTful Environments (CoRE) Parameters" registry. Although this specification defines a basic set of parameters, it is expected that other standards that make use of this interface will define new ones.¶

Each entry in the registry must include:¶

• the human-readable name of the parameter,¶
• the short name, as used in query parameters or target attributes,¶
• syntax and validity requirements (if any),¶
• indication of whether it can be passed as a query parameter at registration of endpoints, passed as a query parameter in lookups, or expressed as a target attribute,¶
• a description, and¶
• a link to reference documentation.¶

The query parameterMUST be both a valid URI query key[RFC3986] and a token as used in[RFC8288].¶

The reference documentation must give details on whether the parameter can be updated and how it is to be processed in lookups.¶

The mechanisms around new RD parameters should be designed in such a way that they tolerate RD implementations that are unaware of the parameter and expose any parameter passed at registration or updates in endpoint lookups. (For example, if a parameter used at registration were to be confidential, the registering endpoint should be instructed to only set that parameter if the RD advertises support for keeping it confidential at the discovery step.)¶

Initial entries in this subregistry are as follows:¶

Where:¶

Short:

Short name used in query parameters or target attributes¶

Validity:

Unicode* =

up to 63 bytes of UTF-8-encoded Unicode, with no control characters as perSection 5¶

Use:

R =

used at registration¶

L =

used at lookup¶

A =

expressed in the target attribute¶

The descriptions for the options defined in this document are only summarized here.To which registrations they apply and when they are to be shown are described in the respective sections of this document.All their reference documentation entries point to this document.¶

The IANA policy for future additions to the subregistry is Expert Review,as described in[RFC8126]. The evaluation should considerformal criteria,duplication of functionality (i.e., is the new entry redundant with an existing one?),topical suitability (e.g., is the described property actually a property of the endpoint and not a property of a particular resource, in which case it should go into the payload of the registration and need not be registered?),and the potential for conflict with commonly used target attributes (e.g.,if could be used as a parameter for conditional registration if it were not to be used in lookup or attributes but would make a bad parameter for lookup because a resource lookup with anif query parameter could ambiguously filter by the registered endpoint property or the target attribute[RFC6690]).¶

9.4.Endpoint Type (et=) RD Parameter Values

This specification establishes a new subregistry called "Endpoint Type (et=) RD Parameter Values" within the "Constrained RESTful Environments (CoRE) Parameters" registry. The registry properties (required policy, requirements, and template) are identical to those of the "Resource Type (rt=) Link Target Attribute Values" subregistry defined in[RFC6690]; in short, the review policy is IETF Review for values starting with "core" and Specification Required for others.¶

The requirements to be enforced are:¶

• The valuesMUST be related to the purpose described inSection 9.3.1.¶
• The registered valuesMUST conform to the ABNF reg-rel-type definition of[RFC6690] andMUST NOT be a URI.¶
• It is recommended to use the period "." character for segmentation.¶

The initial contents of the registry are as follows:¶

9.5.Multicast Address Registration

IANA has assigned the following multicast addresses for use by CoAP nodes:¶

IPv4

-- "All CoRE Resource Directories" address 224.0.1.190, in the "Internetwork Control Block (224.0.1.0 - 224.0.1.255 (224.0.1/24))" subregistry within the "IPv4 Multicast Address Space Registry". As the address is used for discovery that may span beyond a single network, it has come from the Internetwork Control Block (224.0.1.x)[RFC5771].¶

IPv6

-- "All CoRE Resource Directories" address ff0x::fe, in the "Variable Scope Multicast Addresses" subregistry within the "IPv6 Multicast Address Space Registry"[RFC3307]. Note that there is a distinct multicast address for each scope that interested CoAP nodes should listen to; CoAP needs the link-local and site-local scopes only.¶

9.6.Well-Known URIs

IANA has registered the URI suffix "rd" in the "Well-Known URIs" registry as follows:¶

9.7.Service Name and Transport Protocol Port Number Registry

IANA has added four new items to the "Service Name and Transport Protocol Port Number Registry" as follows:¶

10.1.Lighting Installation

This example shows a simplified lighting installation that makes use ofthe RD with a CoAP interface to facilitate the installation and startup ofthe application code in the lights and sensors. In particular, the exampleleads to the definition of a group and the enabling of the correspondingmulticast address, as described inAppendix A. No conclusions must be drawn on the realization of actualinstallation or naming procedures, because the example only emphasizes some of the issuesthat may influence the use of the RD and does not pretend to be normative.¶

Req: POST coap://[2001:db8:4::ff]/rd  ?ep=lm_R2-4-015_wndw&base=coap://[2001:db8:4::1]&d=R2-4-015Payload:</light/left>;rt="tag:example.com,2020:light",</light/middle>;rt="tag:example.com,2020:light",</light/right>;rt="tag:example.com,2020:light"Res: 2.01 CreatedLocation-Path: /rd/4521Req: POST coap://[2001:db8:4::ff]/rd  ?ep=lm_R2-4-015_door&base=coap://[2001:db8:4::2]&d=R2-4-015Payload:</light/left>;rt="tag:example.com,2020:light",</light/middle>;rt="tag:example.com,2020:light",</light/right>;rt="tag:example.com,2020:light"Res: 2.01 CreatedLocation-Path: /rd/4522Req: POST coap://[2001:db8:4::ff]/rd  ?ep=ps_R2-4-015_door&base=coap://[2001:db8:4::3]&d=R2-4-015Payload:</ps>;rt="tag:example.com,2020:p-sensor"Res: 2.01 CreatedLocation-Path: /rd/4523

Req: POST coap://[2001:db8:4::ff]/rd  ?ep=grp_R2-4-015&et=core.rd-group&base=coap://[ff05::1]Payload:</light/left>;rt="tag:example.com,2020:light",</light/middle>;rt="tag:example.com,2020:light",</light/right>;rt="tag:example.com,2020:light"Res: 2.01 CreatedLocation-Path: /rd/501

Req: GET coap://[2001:db8:4::ff]/rd-lookup/ep  ?d=R2-4-015&et=core.rd-group&rt=lightRes: 2.05 ContentPayload:</rd/501>;ep=grp_R2-4-015;et=core.rd-group;          base="coap://[ff05::1]";rt=core.rd-ep

10.2.OMA Lightweight M2M (LwM2M)

OMA LwM2M is a profile for device services based on CoAP, providing interfaces and operations for device management and device service enablement.¶

An LwM2M server is an instance of an LwM2M middleware service layer, containing an RD ([LwM2M], starting at page 36).¶

That RD only implements the registration interface, and no lookup is implemented.Instead, the LwM2M server provides access to the registered resources in a similar way to a reverse proxy.¶

The location of the LwM2M server and RD URI path is provided by the LwM2M bootstrap process, so no dynamic discovery of the RD is used. LwM2M servers and endpoints are not required to implement the/.well-known/core resource.¶

B.1.A Simple Example

Let's start this example with a very simple host,2001:db8:f0::1. A clientthat follows classical CoAP discovery ([RFC7252],Section 7) sends thefollowing multicast request to learn about neighbors supporting resources withresource-type "temperature".¶

The client sends a link-local multicast:¶

Req: GET coap://[ff02::fd]:5683/.well-known/core?rt=temperatureRes: 2.05 ContentPayload:</sensors/temp>;rt=temperature;ct=0

where the response is sent by the server,[2001:db8:f0::1]:5683.¶

While a practical client side implementation might just goahead and create a new request to[2001:db8:f0::1]:5683 with Uri-Pathsensors andtemp, the full resolution steps for insertion into and retrieval from the RD without any shortcuts are as follows.¶

B.2.A Slightly More Complex Example

Omitting thert=temperature filter, the discovery query wouldhave given some more links in the payload:¶

Req: GET coap://[ff02::fd]:5683/.well-known/coreRes: 2.05 ContentPayload:</sensors/temp>;rt=temperature;ct=0,</sensors/light>;rt=light-lux;ct=0,</t>;anchor="/sensors/temp";rel=alternate,<http://www.example.com/sensors/t123>;anchor="/sensors/temp";    rel=describedby

Parsing the third link, the client encounters the "anchor" parameter. It isa URI relative to the base URI of the request and is thus resolved tocoap://[2001:db8:f0::1]/sensors/temp.That is the context resource of the link, so the "rel" statement is not aboutthe target and the base URI any more but about the target and the resolvedURI. Thus, the third link could be read as:¶

coap://[2001:db8:f0::1]/sensors/temp has an alternate representation atcoap://[2001:db8:f0::1]/t.¶

Following the same resolution steps, the fourth link can be read ascoap://[2001:db8:f0::1]/sensors/temp isdescribed byhttp://www.example.com/sensors/t123.¶

B.3.Enter the Resource Directory

The RD tries to carry the semantics obtainable by classical CoAP discovery over to the resource lookup interface as faithfully as possible.¶

For the following queries, we will assume that the simple host has used simple registration to register at the RD that was announced to it, sending this request from its UDP port[2001:db8:f0::1]:6553:¶

Req: POST coap://[2001:db8:f0::ff]/.well-known/rd?ep=simple-host1Res: 2.04 Changed

The RD would have accepted the registration and queried thesimple host's/.well-known/core by itself. As a result, the host is registeredas an endpoint in the RD with the name "simple-host1". The registration isactive for 90000 seconds, and the endpoint registration base URI iscoap://[2001:db8:f0::1], following the resolution steps described inAppendix B.1.1. It should be remarked that the base URI constructed that way always yields a URI of the form scheme://authority without path suffix.¶

If the client now queries the RD as it would previously have issued a multicastrequest, it would go through the RD discovery steps by fetchingcoap://[2001:db8:f0::ff]/.well-known/core?rt=core.rd-lookup-res, obtaincoap://[2001:db8:f0::ff]/rd-lookup/res as the resource lookup endpoint, andask it for all temperature resources:¶

Req: GET coap://[2001:db8:f0::ff]/rd-lookup/res?rt=temperatureRes: 2.05 ContentPayload:<coap://[2001:db8:f0::1]/sensors/temp>;rt=temperature;ct=0

This is notliterally the same response that it would have received from amulticast request, but it contains the equivalent statement:¶

coap://[2001:db8:f0::1] is hosting the resourcecoap://[2001:db8:f0::1]/sensors/temp, which is of the resource type "temperature" andcan be accessed using the text/plain content format.¶

To complete the examples, the client could also query all resources hosted atthe endpoint with the known endpoint name "simple-host1":¶

Req: GET coap://[2001:db8:f0::ff]/rd-lookup/res?ep=simple-host1Res: 2.05 ContentPayload:<coap://[2001:db8:f0::1]/sensors/temp>;rt=temperature;ct=0,<coap://[2001:db8:f0::1]/sensors/light>;rt=light-lux;ct=0,<coap://[2001:db8:f0::1]/t>;    anchor="coap://[2001:db8:f0::1]/sensors/temp";rel=alternate,<http://www.example.com/sensors/t123>;    anchor="coap://[2001:db8:f0::1]/sensors/temp";rel=describedby

All the target and anchor references are already in absolute form there, whichdon't need to be resolved any further.¶

Had the simple host done an equivalent full registration with a base= parameter (e.g.,?ep=simple-host1&base=coap+tcp://sh1.example.com), that context wouldhave been used to resolve the relative anchor values instead, giving the following and analogous links:¶

<coap+tcp://sh1.example.com/sensors/temp>;rt=temperature;ct=0

B.4.A Note on Differences between Link-Format and Link Header Fields

While link-format and Link header fields look very similar and are based on the samemodel of typed links, there are some differences between[RFC6690] and[RFC8288].When implementing an RD or interacting with an RD,care must be taken to follow the behavior described in[RFC6690]wheneverapplication/link-format representations are used.¶

• "Default value of anchor":Under both[RFC6690] and[RFC8288],relative references in the term inside the angle brackets (the target)and the anchor attribute are resolved against the relevant base URI(which usually is the URI used to retrieve the entity)and independent of each other.¶

  When, in a Link header[RFC8288], the anchor attribute is absent,the link's context is the URI of the selected representation(and usually equal to the base URI).¶

  In links per[RFC6690], if the anchor attribute is absent,the default value is the Origin of(for all relevant cases, the URI reference/ resolved against)the link's target.¶

• There is no percent encoding in link-format documents.¶

  A link-format document is a UTF-8-encoded string of Unicode characters and does not have percent encoding, while Link header fields are practically ASCII strings that use percent encoding for non-ASCII characters, stating the encoding explicitly when required.¶

  For example, while a Link header field in a page about a Swedish city might read:¶

  Link: </temperature/Malm%C3%B6>;rel=live-environment-data

  ¶

  a link-format document from the same source might describe the link as:¶

  </temperature/Malmö>;rel=live-environment-data

  ¶