Movatterモバイル変換

Network Working Group                                          D. WaldenRequest for Comments: 547                                        BBN-NETNIC: 17793                                                13 August 1973Change to the Very Distant Host Specification   Attached is a new version of figure F-4 for BBN Report 1822,   Specification for the Interconnection of a Host and an IMP.  Also   attached is replacement text for the paragraph beginning at the   bottom of page F-7 and continuing through page F-8.   Please put this RFC with your copy of 1822 pending update of 1822.   DCW/ph                   SPECIAL PACKET BIT ___                                         |                                         |      ___HELLO/I-HEARD-YOU BIT           |      ___ UNUSED __     |                                   |     |             |     |                                   |     |             |     V                                   V     V             V    _______________________________________________________________   |   |   |                       |   |   |///////|   |   |///|   |   |   |   |                       |   |   |///////|   |   |///|   |   |___|___|___|___|___|___|___|___|___|___|///|///|___|___|///|___|     ^   ^     PACKET WORD COUNT     ^               ^   ^       ^     |   |         ( 6 BITS )        |               |   |       |     |   |                           |               |   |    CHANNEL     |   |                           |               |   |    NUMBER     |   |                           |               |   |     |  PACKET                  HOST/IMP BIT         |  CHANNEL ZERO     |  ODD/EVEN BIT                                 |  ACKNOWLEDGE BIT     |                                               |    LAST PACKET BIT                                CHANNEL ONE                                                   ACKNOWLEDGEMENT BIT                          FIG. F-4   CONTROL WORD FORMATWalden                                                          [Page 1]

RFC 547      Change to the Very Distant Host Specification13 August 1973   The following algorithm is used to decide whether the circuit between   an IMP and a very distant Host is dead or alive.  We first define   what we call a special packet -- this is (logically) a one word   packet consisting of only the control word and having the SPECIAL   PACKET bit set to one.  All packets which are not special packets   (i.e., which are regular data packets or null packets) have the   SPECIAL PACKET bit set to zero.  In a special packet, none of the   control word fields or bits have their usual meanings; consequently,   a special packet cannot be used to acknowledge data packets or send   data.  In a special packet, only one bit other than the SPECIAL   PACKET bit has any meaning, the HELLO/I-HEARD-YOU bit.   Every r seconds both IMP and Host (independently) send a HELLO   packet, a special packet with the HELLO/I-HEARD-YOU bit set to zero.   When either IMP or Hosts receives a HELLO packet, it must promptly   (with highest priority) send the other an I-HEARD-YOU packet, a   special packet with the HELLO/I-HEAR-YOU bit set to one.  In other   words, the I-HEARD-YOU packet is an acknowledgement of the periodic   HELLO packet, and a I-HEARD-YOU packet must only be sent as   acknowledgement for a HELLO packet.  If either IMP or Host sends more   than t HELLO packets without receiving an I-HEARD-YOU packet in   acknowledgement, the IMP or Host declares the line dead.  Once either   IMP or Host declares the line dead, it must send or accept no packets   (either special or regular) for 2*t*r* seconds to allow the other   party also to declare the line dead.  After waiting 2*t*r* seconds,   an attempt is made to bring the line alive.  This is done by sending   HELLO packets (but no regular packets) every r seconds while noting   received I-HEARD-YOU packets until k HELLO packets in a row are   acknowledged with I-HEARD-YOU packets.  While doing this, received   HELLO packets must be acknowledged with I-HEARD-YOU packets.  Once   acknowledgement for k HELLO packets have been received in a row   (i.e., one acknowledgement every r seconds for k intervals[1]), the   line is declared alive, and regular packets again may be sent,   received, and acknowledged along with the periodic (every r seconds)   HELLO packets.  If a regular data packet is received while a party is   trying to bring the line up (due perhaps to slight timing differences   between the parties at the ends of the line), the data packet must   not be acknowledged.   The odd/even bits, the used/unused bits, and the channel filling and   emptying sequences must be initialized at start up[2] and   reinitialized every time the line is declared dead.  If either the   IMP or Host decides the line is dead, the same action is taken as the   IMP or Host normally takes when the other's ready line is down.  The   line being up causes the same action as is normally taken when the   ready line is up.  The value of r is currently 1.25 seconds, the   value of t is currently 4, and the value of k is currently also 4.Walden                                                          [Page 2]

RFC 547      Change to the Very Distant Host Specification13 August 1973   It is likely that the values of r, t, and k will be adjusted in the   future; very distant Host programmers are advised to make it easy to   change these parameters.Endnotes   [1] In particular, the IMP implementation requires the receipt of an   acknowledgement within r seconds of the transmission of a HELLO   packet in order to consider that the HELLO packet was successfully   acknowledged.   [2] At start-up, the line must be assumed to be dead and the   procedure of waiting 2*t*r* seconds before sending HELLO packets,   etc. must be used to bring the line alive initially.         [ This RFC was put into machine readable form for entry ]          [ into the online RFC archives by Jeff McClellan 1/98 ]Walden                                                          [Page 3]