Movatterモバイル変換
[0]ホーム
[RFC Home] [TEXT|PDF|HTML] [Tracker] [IPR] [Info page]
PROPOSED STANDARD
Network Working Group R. MahyRequest for Comments: 3911 AirespaceCategory: Standards Track D. Petrie Pingtel October 2004The Session Initiation Protocol (SIP) "Join" HeaderStatus of this Memo This document specifies an Internet standards track protocol for the Internet community, and requests discussion and suggestions for improvements. Please refer to the current edition of the "Internet Official Protocol Standards" (STD 1) for the standardization state and status of this protocol. Distribution of this memo is unlimited.Copyright Notice Copyright (C) The Internet Society (2004).Abstract This document defines a new header for use with SIP multi-party applications and call control. The Join header is used to logically join an existing SIP dialog with a new SIP dialog. This primitive can be used to enable a variety of features, for example: "Barge-In", answering-machine-style "Message Screening" and "Call Center Monitoring". Note that definition of these example features is non- normative.Table of Contents1. Introduction . . . . . . . . . . . . . . . . . . . . . . . .22. Conventions . . . . . . . . . . . . . . . . . . . . . . . .33. Applicability ofRFC 2804 ("Raven"). . . . . . . . . . . . .34. User Agent Server Behavior: Receiving a Join Header . . . .45. User Agent Client Behavior: Sending a Join header . . . . .66. Proxy behavior . . . . . . . . . . . . . . . . . . . . . . .77. Syntax . . . . . . . . . . . . . . . . . . . . . . . . . . .77.1. The Join Header . . . . . . . . . . . . . . . . . . .77.2. New option tag for Require and Supported headers . . .88. Usage Examples . . . . . . . . . . . . . . . . . . . . . . .8 8.1. Join accepted and transitioned to central conference . 98.2. Join rejected . . . . . . . . . . . . . . . . . . . .129. Security Considerations . . . . . . . . . . . . . . . . . .1310. IANA Considerations . . . . . . . . . . . . . . . . . . . .1410.1. Registration of "Join" SIP header. . . . . . . . . . .14Mahy & Petrie Standards Track [Page 1]
RFC 3911 SIP Join October 200410.2. Registration of "join" SIP Option-tag. . . . . . . . .1411. Acknowledgments . . . . . . . . . . . . . . . . . . . . . .1412. References . . . . . . . . . . . . . . . . . . . . . . . . .1412.1. Normative References . . . . . . . . . . . . . . . . .1412.2. Informative References . . . . . . . . . . . . . . . .1513. Authors' Addresses . . . . . . . . . . . . . . . . . . . . .1614. Full Copyright Statement . . . . . . . . . . . . . . . . . .171. Introduction This document describes a SIP [1] extension header field as part of the SIP multiparty applications architecture framework [12]. The Join header is used to logically join an existing SIP dialog with a new SIP dialog. This is especially useful in peer-to-peer call control environments. One use of the "Join" header is to insert a new participant into a multimedia conversation (which may be a two-party call or a SIP conference [15]). While this functionality is already available using 3rd party call control [17], style call control, the 3pcc model requires a central point of control which may not be desirable in many environments. As such, a method of performing these same call control primitives in a distributed, peer-to-peer fashion is very desirable. Use of an explicit Join header is needed in some cases instead of addressing an INVITE to a conference URI for the following reasons: o A conference may not yet exist--the new invitation may be trying to join an ordinary two-party call. o The party joining may not know if the dialog it wants to join is part of a conference. o The party joining may not know the conference URI. The Join header enables services such as barge-in, real-time message screening, and call center monitoring in a distributed peer-to-peer way. This list of services is not exhaustive. For example, the Boss has an established 2-party conversation with a Customer, and using some out-of-band mechanism (e.g., voice, gestures, or email) asks an Assistant to join the conversation. The Assistant sends an INVITE with a Join header to the Boss with the dialog information for the established dialog. The Assistant obtained this information from some other mechanism, for example a web-page, an instant message, or from the SIP session dialog package [13].Mahy & Petrie Standards Track [Page 2]
RFC 3911 SIP Join October 2004 Assistant Boss Customer | callid: 4@A | callid: 7@c | | | | | |<============>| | | | |INVITE------>| | |Join: 7@c | | | |reINVITE----->| |<----200-----|<----200------| |-----ACK---->|<----ACK------| | | | | .. begins mixing .. | | | | |<===========>|<============>| |<::::::::::::::::::::::::::>| Note that this operation effectively creates a new conference. The Boss needs to cause a new conference to start (and consequently create or obtain a new conference URI). In our example, the Boss mixes all media locally, so it needs to generate a new conference URI, return the conference URI as the Contact to the Join INVITE (with the "isfocus" Contact header field parameter as defined in [6], and reINVITE or UPDATE [22] the Customer with the conference URI as the new Contact. This scenario is also discussed in more detail in [16].2. Conventions The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT", "SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL" in this document are to be interpreted as described inRFC 2119 [2]. This document refers frequently to the terms "confirmed dialog" and "early dialog". These are defined inSection 12 of SIP [1].3. Applicability ofRFC 2804 ("Raven") This primitive can be used to create services which are used for monitoring purposes, however these services do not meet the definition of a wiretap according toRFC 2804 [14]. The definition fromRFC 2804 is included here: Wiretapping is what occurs when information passed across the Internet from one party to one or more other parties is delivered to a third party: 1. Without the sending party knowing about the third partyMahy & Petrie Standards Track [Page 3]
RFC 3911 SIP Join October 2004 2. Without any of the recipient parties knowing about the delivery to the third party 3. When the normal expectation of the sender is that the transmitted information will only be seen by the recipient parties or parties obliged to keep the information in confidence 4. When the third party acts deliberately to target the transmission of the first party, either because he is of interest, or because the second party's reception is of interest. Specifically, item 2 of this definition does not apply to this extension, as one party is always aware of a Join request and can even decline such requests. In addition, in many applications of this primitive, some or all of the other items may not apply. For example, in many call centers which handle financial transactions, all conversations are recorded with the full knowledge and expectation of all parties involved.4. User Agent Server Behavior: Receiving a Join Header The Join header contains information used to match an existing SIP dialog (call-id, to-tag, and from-tag). Upon receiving an INVITE with a Join header, the UA attempts to match this information with a confirmed or early dialog. The to-tag and from-tag parameters are matched as if they were tags present in an incoming request. In other words the to-tag parameter is compared to the local tag, and the from-tag parameter is compared to the remote tag. If more than one Join header field is present in an INVITE, or if a Join header field is present in a request other than INVITE, the UAS MUST reject the request with a 400 Bad Request response. The Join header has specific call control semantics. If both a Join header field and another header field with contradictory semantics (for example a Replaces [8] header field) are present in a request, the request MUST be rejected with a 400 "Bad Request" response. If the Join header field matches more than one dialog, the UA MUST act as if no match is found. If no match is found, but the Request-URI in the INVITE corresponds to a conference URI, the UAS MUST ignore the Join header and continue processing the INVITE as if the Join header did not exist. This allows User Agents which receive an INVITE with Join to redirect the request directly to a conference URI.Mahy & Petrie Standards Track [Page 4]
RFC 3911 SIP Join October 2004 Otherwise if no match is found, the UAS rejects the INVITE and returns a 481 Call/Transaction Does Not Exist response. Likewise, if the Join header field matches a dialog which was not created with an INVITE, the UAS MUST reject the request with a 481 response. If the Join header field matches a dialog which has already terminated, the UA SHOULD decline the request with a 603 Declined response. If the Join header field matches an active dialog (n.b. unlike the Replaces header, the Join header has no limitation on its use with early dialogs), the UA MUST verify that the initiator of the new INVITE is authorized to join the matched dialog. If the initiator of the new INVITE has authenticated successfully as equivalent to the user who is being joined, then the join is authorized. For example, if the user being joined and the initiator of the joining dialog share the same credentials for Digest authentication [4], or they sign the join request with S/MIME [5] with the same private key and present the (same) corresponding certificate used in the original dialog, then the join is authorized. Alternatively, the Referred-By mechanism [9] defines a mechanism that the UAS can use to verify that a join request was sent on behalf of the other participant in the matched dialog (in this case, triggered by a REFER request). If the join request contains a Referred-By header which corresponds to the user being joined, the UA SHOULD treat the join as if it was authorized by the joined party. The Referred-By header MUST reference a corresponding, valid Refererred- By Authenticated Identity Body [10]. The UA MAY apply other local policy to authorize the remainder of the request. In other words, the UAS may apply different policy to the joined dialog than was applied to the target dialog. The UA MAY also maintain a list of authorized entities who are allowed to join any dialog with certain characteristics (for example, all dialogs placed in the call center context of the UA). In addition, the UA MAY use other authorization mechanisms defined for this purpose in standards track extensions. For example, an extension could define a mechanism for transitively asserting authorization of a join. If authorization is successful, the UA attempts to accept the new INVITE, and assign any mixing or conferencing resources necessary to complete the join. If the UA cannot accept the new INVITE (for example: it cannot establish required QoS or keying, or it has incompatible media), the UA MUST return an appropriate error response and MUST leave the matched dialog unchanged.Mahy & Petrie Standards Track [Page 5]
RFC 3911 SIP Join October 2004 A User Agent that accepts a Join header needs to setup dialogs or conferences such that the requesting UAC is logically added to the conversation space associated with the matched dialog. Any dialogs which are already logically associated with the matched dialog in the same conversation space are included as well. For a detailed description of various conferencing mechanisms that could be used to handle a Join, please consult the SIP conferencing framework [15]. If the UAS has sufficient resources to locally handle the Join request, the UAS SHOULD accept the Join request and perform the appropriate media mixing or combining. The UAS MAY rearrange appropriate dialogs instead as described below, based on some local policy. If the UAS does not have sufficient resources locally to handle the request, or does not wish to use these local resources, but is aware of other resources which could be used to satisfy the request (e.g., a centralized conference server), the UA SHOULD create a conference using this resource (e.g., INVITE the conference server to obtain a conference URI), redirect the requestor to this resource, and request other participants in the same conversation space to use this resource. The UA MAY use any appropriate mechanism to transition participants to the new resource (e.g., 3xx response, 3rd-party call control reinvitiations, REFER requests, or reinvitations to a multicast group). The UA SHOULD only use mechanisms which are expected to be acceptable to the other participants. For example, the UA SHOULD NOT attempt to transition the participants to a multicast group unless the UA can reasonably expect that all the participants can support multicast. If the UAS is incapable of satisfying the Join request, it MUST return a 488 "Not Acceptable Here" response.5. User Agent Client Behavior: Sending a Join header A User Agent that wishes to add a new dialog of its own to a single existing early or confirmed dialog and any associated dialogs or conferences, MAY send the target User Agent an INVITE request containing a Join header field. The UAC places the Call-ID, to-tag, and from-tag information for the target dialog in a single Join header field and sends the new INVITE to the target. If the User Agent receives a 300-class response, and acts on this response by sending an INVITE to a Contact in the response, this redirected INVITE MUST contain the same Join header which was present in the original request. Although this is unusual, this allows INVITE requests with a Join header to be redirected before reaching the target UAS.Mahy & Petrie Standards Track [Page 6]
RFC 3911 SIP Join October 2004 Note that use of the Join mechanism does not provide a way to match multiple dialogs, nor does it provide a way to match an entire call, an entire transaction, or to follow a chain of proxy forking logic.6. Proxy behavior Proxy Servers do not require any new behavior to support this extension. They simply pass the Join header field transparently as described in the SIP specification. Note that it is possible for a proxy (especially when forking based on some application layer logic, such as caller screening or time- of-day routing) to forward an INVITE request containing a Join header field to a completely orthogonal set of Contacts than the original request it was intended to replace. In this case, the INVITE request with the Join header field will fail.7. Syntax7.1. The Join Header The Join header field indicates that a new dialog (created by the INVITE in which the Join header field in contained) should be joined with a dialog identified by the header field, and any associated dialogs or conferences. It is a request header only, and defined only for INVITE requests. The Join header field MAY be encrypted as part of end-to-end encryption. Only a single Join header field value may be present in a SIP request This document adds the following entry to Table 3 of [1]. Additions to this table are also provided for extension methods defined at the time of publication of this document. This is provided as a courtesy to the reader and is not normative in any way. MESSAGE, SUBSCRIBE and NOTIFY, REFER, INFO, UPDATE, PRACK, and PUBLISH are defined respectively in [19], [20], [7], [21], [22], [23], and [24]. Header field where proxy ACK BYE CAN INV OPT REG MSG ------------ ----- ----- --- --- --- --- --- --- --- Join R - - - o - - - SUB NOT REF INF UPD PRA PUB --- --- --- --- --- --- --- Join R - - - - - - -Mahy & Petrie Standards Track [Page 7]
RFC 3911 SIP Join October 2004 The following syntax specification uses the augmented Backus-Naur Form (BNF) as described inRFC 2234 [3]. Join = "Join" HCOLON callid *(SEMI join-param) join-param = to-tag / from-tag / generic-param to-tag = "to-tag" EQUAL token from-tag = "from-tag" EQUAL token A Join header MUST contain exactly one to-tag and exactly one from- tag, as they are required for unique dialog matching. For compatibility with dialogs initiated byRFC 2543 [11] compliant UAs, a to-tag of zero matches both a to-tag value of zero and a null to- tag. Likewise, a from-tag of zero matches both a to-tag value of zero and a null from-tag. Examples: Join: 98732@sip.example.com ;from-tag=r33th4x0r ;to-tag=ff87ff Join: 12adf2f34456gs5;to-tag=12345;from-tag=54321 Join: 87134@192.0.2.23;to-tag=24796;from-tag=07.2. New option tag for Require and Supported headers This specification defines a new Require/Supported header option tag "join". UAs which support the Join header MUST include the "join" option tag in a Supported header field. UAs that want explicit failure notification if Join is not supported MAY include the "join" option in a Require header field. Example: Require: join, 100rel8. Usage Examples The following non-normative examples are not intended to enumerate all the possibilities for the usage of this extension, but rather to provide examples or ideas only. For more examples, please see service-examples [18].Mahy & Petrie Standards Track [Page 8]
RFC 3911 SIP Join October 20048.1. Join accepted and transitioned to central conference A B C conf | | callid: 7@c | | | | | | | |<-INVITE------| | *1 | |-----200----->| | *2 | |<----ACK------| | *3 | |<============>| | | | | | |INVITE------>| | | *4 |Join: 7@c |--INVITE-------------------->| *5 | |<----200---------------------| *6 | |-----ACK-------------------->| |<----302-----| | | *7 |-----ACK---->| | | |INVITE------------------------------------>| *8 |<--200-------------------------------------| *9 |---ACK------------------------------------>| | |--REFER------>| | *10 | |<---202-------| | | |<--NOTIFY-----|--INVITE-*11->| | |------200---->|<----200-*12--| | |<--NOTIFY-----|-----ACK----->| | |------200---->| | | |---BYE------->| | | |<--200--------| | | | | | |<=========================================>| mixes the | |<===========================>| three sessions | | |<============>| together The conversation now appears identical to the locally mixed one from the example in the Introduction. Details of how the Join are implemented are transparent to A. B could have used 3rd party call control instead to move the necessary sessions. Message *1: C -> B INVITE sip:bob@example.org SIP/2.0 To: <bob@example.org> From: <carol@example.org>;tag=xyz Call-Id: 7@c.example.org CSeq 1 INVITE Contact: <sip:carol@c.example.org>Mahy & Petrie Standards Track [Page 9]
RFC 3911 SIP Join October 2004 Message *2: B -> C SIP/2.0 200 OK To: <bob@example.org>;tag=pdq From: <carol@example.org>;tag=xyz Call-Id: 7@c.example.org CSeq 1 INVITE Contact: <sip:bob@b.example.org> Message *3: C -> B ACK sip:carol@c.example.org SIP/2.0 To: <bob@example.org>;tag=pdq From: <carol@example.org>;tag=xyz Call-Id: 7@c.example.org CSeq 1 INVITE Message *4: A -> B INVITE sip:bob@b.example.org SIP/2.0 To: <sip:bob@example.org> From: <sip:alice@example.org>;tag=iii Call-Id: 777@a.example.org CSeq: 1 INVITE Contact: <sip:alice@a.example.org> Join: 7@c.example.org;to-tag=xyz;from-tag=pdq Message *5: B -> conf INVITE sip:conf-factory@example.org SIP/2.0 To: <sip:conf-factory@example.org> From: <sip:bob@example.org>;tag=abc Call-Id: 999@b.example.org CSeq: 1INVITE Contact: <sip:bob@b.example.org> Message *6: conf -> B SIP/2.0 200 OK To: <sip:conf-factory@example.org>;tag=def From: <sip:bob@example.org>;tag=abc Call-Id: 999@b.example.org CSeq: 1INVITE Contact: <sip:conf456@conf-srv2.example.org>;isfocusMahy & Petrie Standards Track [Page 10]
RFC 3911 SIP Join October 2004 Message *7: B -> A SIP/2.0 302 Moved Temporarily To: <sip:bob@example.org> From: <sip:alice@example.org>;tag=iii Call-Id: 777@a.example.org CSeq: 1 INVITE Contact: <sip:conf456@conf-srv2.example.org>;isfocus Message *8: A -> conf INVITE sip:conf456@conf-srv2.example.org SIP/2.0 To: <sip:bob@example.org> From: <sip:alice@example.org>;tag=iii Call-Id: 777@a.example.org CSeq: 2 INVITE Contact: <sip:alice@a.example.org> Join: 7@c.example.org;to-tag=xyz;from-tag=pdq Message *9: conf ->A SIP/2.0 200 OK To: <sip:bob@example.org>;tag=jjj From: <sip:alice@example.org>;tag=iii Call-Id: 777@a.example.org CSeq: 2 INVITE Contact: <sip:conf456@conf-srv2.example.org>;isfocus Message *10: B -> C REFER sip:carol@c.example.org SIP/2.0 To: <carol@example.org>;tag=xyz From: <bob@example.org>;tag=pdq Call-Id: 7@c.example.org CSeq: 1 REFER Contact: <sip:bob@b.example.org> Refer-To: <sip:conf456@conf-srv2.example.org> Referred-By: <sip:bob@b.example.org> Message *11: C -> conf INVITE sip:conf456@conf-srv2.example.org SIP/2.0 To: <sip:conf456@conf-srv2.example.org> From: <carol@example.org>;tag=mmmMahy & Petrie Standards Track [Page 11]
RFC 3911 SIP Join October 2004 Call-Id: 34343@c.example.com CSeq: 1 INVITE Contact: <sip:carol@c.example.com> Referred-By: <sip:bob@b.example.org> Message *12: C -> conf SIP/2.0 200 OK To: <sip:conf456@conf-srv2.example.org> From: <carol@example.org>;tag=mmm Call-Id: 34343@c.example.com CSeq: 1 INVITE Contact: <sip:conf456@conf-srv2.example.org>;isfocus Referred-By: <sip:bob@b.example.org>8.2. Join rejected A B C | | callid: 7@c | | | | | |<============>| | | | |INVITE------>| *1 | |Join: 7@c | | | | | |<----486-----| *2 | |-----ACK---->| | | | | In this example B is Busy (does not want to be disturbed), and therefore does not wish to add A. B could also decline the request with a 603 response. Message *1: A -> B INVITE sip:bob@b.example.org SIP/2.0 To: <sip:bob@example.org> From: <sip:alice@example.org>;tag=iii Call-Id: 777@a.example.org CSeq: 1 INVITE Contact: <sip:alice@a.example.org> Join: 7@c.example.org;to-tag=xyz;from-tag=pdqMahy & Petrie Standards Track [Page 12]
RFC 3911 SIP Join October 2004 Message *2: B -> A SIP/2.0 486 Busy To: <sip:bob@example.org> From: <sip:alice@example.org>;tag=iii Call-Id: 777@a.example.org CSeq: 1 INVITE9. Security Considerations The extension specified in this document significantly changes the relative security of SIP devices. Currently in SIP, even if an eavesdropper learns the Call-ID, To, and From headers of a dialog, they cannot easily modify or destroy that dialog if Digest authentication or end-to-end message integrity are used. This extension can be used to insert or monitor potentially sensitive content in a multimedia conversation. As such, invitations with the Join header MUST only be accepted if the peer requesting replacement has been properly authenticated using a standard SIP mechanism (Digest or S/MIME), and authorized to be joined with the target dialog. (All SIP implementations are already required to support Digest Authentication.) Generally authorization for joins are configured as a matter of local policy as long-duration persistent relationships. For example, the UAs used by call center agents might be configured with a list of identities who could join their calls (supervisors and any call center monitoring User Agents). Alternatively the call center agents might rely on transitive authorization assertions from a (shorter) list of authorized hosts (e.g., a certificate authority). For answering-machine-style message screening this is even easier. Presumably the user screening their messages already has some credentials with their messaging server. Some mechanisms for obtaining the dialog information needed by the Join header (Call-ID, to-tag, and from-tag) include URIs on a web page, subscriptions to an appropriate event package, and notifications after a REFER request. Use of end-to-end security mechanisms to integrity protect and encrypt this information is also RECOMMENDED. This extension was designed to take advantage of future signature or authorization schemes defined by standards track extensions. In general, call control features would benefit considerably from such work.Mahy & Petrie Standards Track [Page 13]
RFC 3911 SIP Join October 2004Section 4 describes specific mechanisms for authorization using Digest Authentication and S/MIME (RFC 3261) and Referred-by [9], the currently available capabilities in SIP.10. IANA Considerations10.1. Registration of "Join" SIP header Name of Header: Join Short form: none Normative description:section 7.1 of this document10.2. Registration of "join" SIP Option-tag Name of option: join Description: Support for the SIP Join header SIP headers defined: Join Normative description: This document11. Acknowledgments Thanks to Robert Sparks, Alan Johnston, and Ben Campbell and many other members of the SIP WG for their continued support of the cause of distributed call control in SIP.12. References12.1. Normative References [1] Rosenberg, J., Schulzrinne, H., Camarillo, G., Johnston, A., Peterson, J., Sparks, R., Handley, M., and E. Schooler, "SIP: Session Initiation Protocol",RFC 3261, June 2002. [2] Bradner, S., "Key words for use in RFCs to Indicate Requirement Levels",BCP 14,RFC 2119, March 1997. [3] Crocker, D. and P. Overell, "Augmented BNF for Syntax Specifications: ABNF",RFC 2234, November 1997. [4] Franks, J., Hallam-Baker, P., Hostetler, J., Lawrence, S., Leach, P., Luotonen, A., and L. Stewart, "HTTP Authentication: Basic and Digest Access Authentication",RFC 2617, June 1999.Mahy & Petrie Standards Track [Page 14]
RFC 3911 SIP Join October 2004 [5] Ramsdell, B., "Secure/Multipurpose Internet Mail Extensions (S/MIME) Version 3.1 Message Specification",RFC 3851, July 2004. [6] Rosenberg, J., "Indicating User Agent Capabilities in the Session Initiation Protocol (SIP)",RFC 3840, August 2004.12.2. Informative References [7] Sparks, R., "The Session Initiation Protocol (SIP) Refer Method",RFC 3515, April 2003. [8] Dean, R., Biggs, B., and R. Mahy, "The Session Initiation Protocol (SIP) "Replaces" Header",RFC 3891, September 2004. [9] Sparks, R., "The Session Initiation Protocol (SIP) Referred-By Mechanism",RFC 3892, September 2004. [10] Peterson, J., "Session Initiation Protocol (SIP) Authenticated Identity Body (AIB) Format",RFC 3893, September 2004. [11] Handley, M., Schulzrinne, H., Schooler, E., and J. Rosenberg, "SIP: Session Initiation Protocol",RFC 2543, March 1999. [12] Mahy, R., "A Call Control and Multi-party usage framework for the Session Initiation Protocol (SIP)", Work in Progress, March 2003. [13] Rosenberg, J. and H. Schulzrinne, "An INVITE Initiated Dialog Event Package for the Session Initiation Protocol (SIP)", Work in Progress, March 2003. [14] IAB and IESG, "IETF Policy on Wiretapping",RFC 2804, May 2000. [15] Rosenberg, J., "A Framework for Conferencing with the Session Initiation Protocol", Work in Progress, May 2003. [16] Johnston, A. and O. Levin, "Session Initiation Protocol Call Control - Conferencing for User Agents", Work in Progress, April 2003. [17] Rosenberg, J., Peterson, J., Schulzrinne, H., and G. Camarillo, "Best Current Practices for Third Party Call Control (3pcc) in the Session Initiation Protocol (SIP)",BCP 85,RFC 3725, April 2004. [18] Johnston, A. and S. Donovan, "Session Initiation Protocol Service Examples", Work in Progress, March 2003.Mahy & Petrie Standards Track [Page 15]
RFC 3911 SIP Join October 2004 [19] Campbell, B., Rosenberg, J., Schulzrinne, H., Huitema, C., and D. Gurle, "Session Initiation Protocol (SIP) Extension for Instant Messaging",RFC 3428, December 2002. [20] Roach, A., "Session Initiation Protocol (SIP)-Specific Event Notification",RFC 3265, June 2002. [21] Donovan, S., "The SIP INFO Method",RFC 2976, October 2000. [22] Rosenberg, J., "The Session Initiation Protocol (SIP) UPDATE Method",RFC 3311, October 2002. [23] Rosenberg, J. and H. Schulzrinne, "Reliability of Provisional Responses in Session Initiation Protocol (SIP)",RFC 3262, June 2002. [24] Campbell, B.,"SIMPLE Presence Publication Mechanism", Work in Progress, February 2003.13. Authors' Addresses Rohan Mahy Airespace 110 Nortech Parkway San Jose, CA 95134 USA EMail: rohan@airespace.com Dan Petrie Pingtel 400 West Cummings Park, Suite 2200 Woburn, MA 01801 USA EMail: dpetrie@pingtel.comMahy & Petrie Standards Track [Page 16]
RFC 3911 SIP Join October 200414. Full Copyright Statement Copyright (C) The Internet Society (2004). This document is subject to the rights, licenses and restrictions contained inBCP 78, and except as set forth therein, the authors retain all their rights. This document and the information contained herein are provided on an "AS IS" basis and THE CONTRIBUTOR, THE ORGANIZATION HE/SHE REPRESENTS OR IS SPONSORED BY (IF ANY), THE INTERNET SOCIETY AND THE INTERNET ENGINEERING TASK FORCE DISCLAIM ALL WARRANTIES, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO ANY WARRANTY THAT THE USE OF THE INFORMATION HEREIN WILL NOT INFRINGE ANY RIGHTS OR ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.Intellectual Property The IETF takes no position regarding the validity or scope of any Intellectual Property Rights or other rights that might be claimed to pertain to the implementation or use of the technology described in this document or the extent to which any license under such rights might or might not be available; nor does it represent that it has made any independent effort to identify any such rights. Information on the IETF's procedures with respect to rights in IETF Documents can be found inBCP 78 andBCP 79. Copies of IPR disclosures made to the IETF Secretariat and any assurances of licenses to be made available, or the result of an attempt made to obtain a general license or permission for the use of such proprietary rights by implementers or users of this specification can be obtained from the IETF on-line IPR repository athttp://www.ietf.org/ipr. The IETF invites any interested party to bring to its attention any copyrights, patents or patent applications, or other proprietary rights that may cover technology that may be required to implement this standard. Please address the information to the IETF at ietf- ipr@ietf.org.Acknowledgement Funding for the RFC Editor function is currently provided by the Internet Society.Mahy & Petrie Standards Track [Page 17]
[8]ページ先頭