Movatterモバイル変換
[0]ホーム
[RFC Home] [TEXT|PDF|HTML] [Tracker] [IPR] [Info page]
PROPOSED STANDARD
Internet Engineering Task Force (IETF) P. DunkleyRequest for Comments: 7977 G. LlewellynUpdates:4975,4976 XuraCategory: Standards Track V. PascualISSN: 2070-1721 Oracle G. Salgueiro R. Ravindranath Cisco September 2016The WebSocket Protocol as a Transportfor the Message Session Relay Protocol (MSRP)Abstract The WebSocket protocol enables two-way real-time communication between clients and servers in situations where direct access to TCP and UDP is not available (for example, from within JavaScript in a web browser). This document specifies a new WebSocket subprotocol as a reliable transport mechanism between Message Session Relay Protocol (MSRP) clients and relays to enable usage of MSRP in new scenarios. This document normatively updates RFCs 4975 and 4976.Status of This Memo This is an Internet Standards Track document. This document is a product of the Internet Engineering Task Force (IETF). It represents the consensus of the IETF community. It has received public review and has been approved for publication by the Internet Engineering Steering Group (IESG). Further information on Internet Standards is available inSection 2 of RFC 7841. Information about the current status of this document, any errata, and how to provide feedback on it may be obtained athttp://www.rfc-editor.org/info/rfc7977.Dunkley, et al. Standards Track [Page 1]
RFC 7977 WebSocket as a Transport for MSRP September 2016Copyright Notice Copyright (c) 2016 IETF Trust and the persons identified as the document authors. All rights reserved. This document is subject toBCP 78 and the IETF Trust's Legal Provisions Relating to IETF Documents (http://trustee.ietf.org/license-info) in effect on the date of publication of this document. Please review these documents carefully, as they describe your rights and restrictions with respect to this document. Code Components extracted from this document must include Simplified BSD License text as described in Section 4.e of the Trust Legal Provisions and are provided without warranty as described in the Simplified BSD License. This document may contain material from IETF Documents or IETF Contributions published or made publicly available before November 10, 2008. The person(s) controlling the copyright in some of this material may not have granted the IETF Trust the right to allow modifications of such material outside the IETF Standards Process. Without obtaining an adequate license from the person(s) controlling the copyright in such materials, this document may not be modified outside the IETF Standards Process, and derivative works of it may not be created outside the IETF Standards Process, except to format it for publication as an RFC or to translate it into languages other than English.Dunkley, et al. Standards Track [Page 2]
RFC 7977 WebSocket as a Transport for MSRP September 2016Table of Contents1. Introduction . . . . . . . . . . . . . . . . . . . . . . . .42. Terminology . . . . . . . . . . . . . . . . . . . . . . . . .42.1. Definitions . . . . . . . . . . . . . . . . . . . . . . .53. WebSocket Protocol Overview . . . . . . . . . . . . . . . . .54. The WebSocket MSRP Subprotocol . . . . . . . . . . . . . . .64.1. Handshake . . . . . . . . . . . . . . . . . . . . . . . .64.2. MSRP Encoding . . . . . . . . . . . . . . . . . . . . . .75. MSRP WebSocket Transport . . . . . . . . . . . . . . . . . .75.1. General . . . . . . . . . . . . . . . . . . . . . . . . .75.2. Updates toRFC 4975 . . . . . . . . . . . . . . . . . . .75.2.1. MSRP URI Transport Parameter . . . . . . . . . . . .75.2.2. SDP Transport Protocol . . . . . . . . . . . . . . .85.3. Updates toRFC 4976 . . . . . . . . . . . . . . . . . . .85.3.1. AUTH Request Authentication . . . . . . . . . . . . .86. Connection Keepalive . . . . . . . . . . . . . . . . . . . .97. Authentication . . . . . . . . . . . . . . . . . . . . . . .98. Examples . . . . . . . . . . . . . . . . . . . . . . . . . .108.1. Authentication . . . . . . . . . . . . . . . . . . . . .108.1.1. WebSocket Authentication . . . . . . . . . . . . . .108.1.2. MSRP Authentication . . . . . . . . . . . . . . . . .128.2. Example Session: MSRP WebSocket Client to MSRP Client . .148.2.1. SDP Exchange . . . . . . . . . . . . . . . . . . . .148.2.2. SEND (MSRP WebSocket Client to MSRP Client) . . . . .158.2.3. SEND (MSRP Client to MSRP WebSocket Client) . . . . .168.3. Example Session: Two MSRP WebSocket Clients . . . . . . .188.3.1. SDP Exchange . . . . . . . . . . . . . . . . . . . .188.3.2. SEND . . . . . . . . . . . . . . . . . . . . . . . .19 8.4. Example Session: MSRP WebSocket Client to MSRP Client Using a Relay . . . . . . . . . . . . . . . . . . . . . .208.4.1. SDP Exchange . . . . . . . . . . . . . . . . . . . .208.4.2. SEND . . . . . . . . . . . . . . . . . . . . . . . .219. Security Considerations . . . . . . . . . . . . . . . . . . .2410. IANA Considerations . . . . . . . . . . . . . . . . . . . . .2411. References . . . . . . . . . . . . . . . . . . . . . . . . .2511.1. Normative References . . . . . . . . . . . . . . . . . .2511.2. Informative References . . . . . . . . . . . . . . . . .25Appendix A. Implementation Guidelines: MSRP WebSocket Client Considerations . . . . . . . . . . . . . . . . . . .27 Acknowledgements . . . . . . . . . . . . . . . . . . . . . . . .27 Authors' Addresses . . . . . . . . . . . . . . . . . . . . . . .28Dunkley, et al. Standards Track [Page 3]
RFC 7977 WebSocket as a Transport for MSRP September 20161. Introduction The WebSocket [RFC6455] protocol enables message exchange between clients and servers on top of a persistent TCP connection (optionally secured with Transport Layer Security (TLS) [RFC5246]). The initial protocol handshake makes use of HTTP [RFC7230] semantics, allowing the WebSocket protocol to reuse existing HTTP infrastructure. Modern web browsers include a WebSocket client stack complying with the WebSocket API [WS-API] as specified by the W3C. It is expected that other client applications (those running in personal computers and devices such as smartphones) will also make a WebSocket client stack available. The specification in this document enables usage of Message Session Relay Protocol [RFC4975] in these scenarios. This specification defines a new WebSocket subprotocol (as defined inSection 1.9 in [RFC6455]) for transporting MSRP messages between a WebSocket client and MSRP relay [RFC4976] containing a WebSocket server, a new transport for MSRP, and procedures for MSRP clients and relays implementing the WebSocket transport. MSRP over WebSocket is well suited for MSRP interactions between clients and servers. Common use cases for MSRP over WebSocket include: o Human-to-machine messaging o Client-to-server data exchange (for example, application control signaling) o Human-to-human messaging where local policy requires authentication and/or logging MSRP Connection Establishment for Media Anchoring (MSRP-CEMA) [RFC6714] is outside of the scope of this document, as this document is intended to describe connecting to a WebSocket server that is an MSRP relay.2. Terminology The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT", "SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL" in this document are to be interpreted as described in [RFC2119].Dunkley, et al. Standards Track [Page 4]
RFC 7977 WebSocket as a Transport for MSRP September 20162.1. Definitions MSRP WebSocket Client: An MSRP entity capable of opening outbound connections to MSRP relays that are WebSocket servers and communicating using the WebSocket MSRP subprotocol as defined by this document. MSRP WebSocket Server: An MSRP entity (specifically an MSRP relay [RFC4976]) capable of listening for inbound connections from WebSocket clients and communicating using the WebSocket MSRP subprotocol as defined by this document.3. WebSocket Protocol Overview The WebSocket protocol [RFC6455] is a transport layer on top of TCP (optionally secured with TLS [RFC5246]) in which both the client and server exchange message units in both directions. The protocol defines a connection handshake, WebSocket subprotocol and extensions negotiation, a frame format for sending application and control data, a masking mechanism, and status codes for indicating disconnection causes. The WebSocket connection handshake is based on HTTP [RFC7230] and utilizes the HTTP GET method with an "Upgrade" request. This is sent by the client and then answered by the server (if the negotiation succeeded) with an HTTP 101 status code. Once the handshake is completed, the connection upgrades from HTTP to the WebSocket protocol. This handshake procedure is designed to reuse the existing HTTP infrastructure. During the connection handshake, client and server agree on the application protocol to use on top of the WebSocket transport. Such application protocol (also known as a "WebSocket subprotocol") defines the format and semantics of the messages exchanged by the endpoints. This could be a custom protocol or a standardized one (such as the WebSocket MSRP subprotocol defined in this document). Once the HTTP 101 response is processed, both client and server reuse the underlying TCP connection for sending WebSocket messages and control frames to each other. Unlike plain HTTP, this connection is persistent and can be used for multiple message exchanges. WebSocket defines message units to be used by applications for the exchange of data, so it provides a message boundary-preserving transport layer. These message units can contain either UTF-8 text or binary data and can be split into multiple WebSocket text/binary transport frames as needed by the WebSocket stack.Dunkley, et al. Standards Track [Page 5]
RFC 7977 WebSocket as a Transport for MSRP September 2016 The WebSocket API [WS-API] for web browsers only defines callbacks to be invoked upon receipt of an entire message unit regardless of whether it was received in a single WebSocket frame or split across multiple frames.4. The WebSocket MSRP Subprotocol The term WebSocket subprotocol refers to an application-level protocol layered on top of a WebSocket connection. This document specifies the WebSocket MSRP subprotocol for carrying MSRP requests and responses through a WebSocket connection.4.1. Handshake The MSRP WebSocket Client and MSRP WebSocket Server negotiate usage of the WebSocket MSRP subprotocol during the WebSocket handshake procedure as defined inSection 1.3 of [RFC6455]. The Client MUST include the value "msrp" in the Sec-WebSocket-Protocol header in its handshake request. The 101 reply from the Server MUST contain "msrp" in its corresponding Sec-WebSocket-Protocol header. Below is an example of a WebSocket handshake in which the Client requests the WebSocket MSRP subprotocol support from the Server: GET / HTTP/1.1 Host: a.example.com Upgrade: websocket Connection: Upgrade Sec-WebSocket-Key: dGhlIHNhbXBsZSBub25jZQ== Origin: http://www.example.com Sec-WebSocket-Protocol: msrp Sec-WebSocket-Version: 13 The handshake response from the Server accepting the WebSocket MSRP subprotocol would look as follows: HTTP/1.1 101 Switching Protocols Upgrade: websocket Connection: Upgrade Sec-WebSocket-Accept: s3pPLMBiTxaQ9kYGzzhZRbK+xOo= Sec-WebSocket-Protocol: msrp Once the negotiation has been completed, the WebSocket connection is established and can be used for the transport of MSRP requests and responses. The WebSocket messages transmitted over this connection MUST conform to the negotiated WebSocket subprotocol.Dunkley, et al. Standards Track [Page 6]
RFC 7977 WebSocket as a Transport for MSRP September 20164.2. MSRP Encoding WebSocket messages can be transported in either UTF-8 text frames or binary frames. MSRP [RFC4975] allows both text and binary bodies in MSRP requests. Therefore, MSRP WebSocket Clients and Servers MUST accept both text and binary frames. The WebSocket API [WS-API] does not allow developers to choose whether to send UTF-8 text or binary frames but will not send non-UTF-8 characters in a text frame. The content of text frames MUST be interpreted as binary by WebSocket Clients and Servers.5. MSRP WebSocket Transport5.1. General WebSocket clients cannot receive WebSocket connections initiated by other WebSocket clients or WebSocket servers. This means that it is challenging for an MSRP client to communicate directly with other MSRP clients. Therefore, all MSRP-over-WebSocket messages MUST be routed via an MSRP WebSocket Server. MSRP traffic transported over WebSockets MUST be protected by using a Secure WebSocket (WSS) connection (using TLS [RFC5246] over TCP). MSRP WebSocket Servers can be used to route MSRP messages between MSRP WebSocket Clients and between MSRP WebSocket Clients and "normal" MSRP clients and relays. Each MSRP chunk MUST be carried within a single WebSocket message, and a WebSocket message MUST NOT contain more than one MSRP chunk. This simplifies parsing of MSRP messages for both clients and servers. When large messages are sent by a non-WebSocket peer, MSRP chunking (as defined inSection 5.1 of [RFC4975]) MUST be used by the WebSocket MSRP Servers to split the message into several smaller MSRP chunks.5.2. Updates toRFC 49755.2.1. MSRP URI Transport Parameter This document defines the value "ws" as the transport parameter value for an MSRP URI [RFC3986] to be contacted using the MSRP WebSocket subprotocol as transport.Dunkley, et al. Standards Track [Page 7]
RFC 7977 WebSocket as a Transport for MSRP September 2016 The updated ABNF [RFC5234] for this parameter is the following (the original BNF for this parameter can be found in [RFC4975]): transport = "tcp" / "ws" / 1*ALPHANUM5.2.2. SDP Transport Protocol This document does not define a new Session Description Protocol (SDP) transport protocol for MSRP over WebSockets. As all MSRP-over- WebSocket messages MUST be routed via an MSRP WebSocket Server, the MSRP WebSocket Client MUST specify "TCP/TLS/MSRP" protocols in the SDP m-line -- that being the protocol used by non-WebSocket clients and between MSRP relays (seeSection 8.1 of [RFC4975]). The "ws" transport parameter will appear in the endpoint URI in the SDP "path" attribute (seeSection 8.2 of [RFC4975]). MSRP was designed with the possibility of new transport bindings in mind (seeSection 6 of [RFC4975]), so MSRP implementations are expected to allow unrecognized transports, provided that they do not have to establish a direct connection to the resource described by the URI.5.3. Updates toRFC 49765.3.1. AUTH Request Authentication The MSRP relay specification [RFC4976] states that AUTH requests MUST be authenticated. This document modifies this requirement to state that all connections between MSRP clients and relays MUST be authenticated. In the case of the MSRP WebSocket Clients, there are three possible authentication mechanisms: 1. HTTP Digest authentication in AUTH (as per [RFC4976]). 2. Cookie-based or HTTP Digest authentication in the WebSocket Handshake (seeSection 7). 3. Mutual TLS between the WebSocket-based MSRP client and the WebSocket server. The AUTH request is a required event when authentication occurs at the WebSocket connection level since the "Use-Path:" header required to create the SDP offer is included in the 200 OK response to the AUTH request.Dunkley, et al. Standards Track [Page 8]
RFC 7977 WebSocket as a Transport for MSRP September 20166. Connection Keepalive It is RECOMMENDED that MSRP WebSocket Clients and Servers keep their WebSocket connections open by sending periodic WebSocket "Ping" frames as described inSection 5.5.2 of [RFC6455]. The WebSocket API [WS-API] does not provide a mechanism for applications running in a web browser to control whether or not periodic WebSocket "Ping" frames are sent to the server. The implementation of such a keepalive feature is the decision of each web browser manufacturer and may also depend on the configuration of the web browser. A future WebSocket protocol extension providing a similar keepalive mechanism could also be used. When MSRP WebSocket Clients or Servers cannot use WebSocket "Ping" frames to keep connections open, an MSRP implementation MAY use bodiless SEND requests as described inSection 7.1 of [RFC4975]. MSRP WebSocket Clients or Servers MUST be prepared to receive bodiless SEND requests.7. Authentication Prior to sending MSRP requests, an MSRP WebSocket Client connects to an MSRP WebSocket Server and performs the connection handshake. As described inSection 3, the handshake procedure involves a HTTP GET method request from the Client and a response from the Server including an HTTP 101 status code. In order to authorize the WebSocket connection, the MSRP WebSocket Server MAY inspect any HTTP headers present (for example, Cookie [RFC6265], Host [RFC7230], or Origin [RFC6454]) in the HTTP GET request. For many web applications, the value of such a Cookie is provided by the web server once the user has authenticated themselves to the web server, which could be done by many existing mechanisms. As an alternative method, the MSRP WebSocket Server could request HTTP authentication by replying to the Client's GET method request with a HTTP 401 status code. The WebSocket protocol [RFC6455] covers this usage inSection 4.1 and is paraphrased as follows: If the status code received from the server is not 101, the WebSocket client stack handles the response per HTTP [RFC7230] procedures; in particular, the client might perform authentication if it receives a 401 status code.Dunkley, et al. Standards Track [Page 9]
RFC 7977 WebSocket as a Transport for MSRP September 2016 If the HTTP GET request contains an Origin header, the MSRP WebSocket Server SHOULD indicate Cross-Origin Resource Sharing [CORS] by adding an Access-Control-Allow-Origin header to the 101 response. Regardless of whether the MSRP WebSocket Server requires authentication during the WebSocket handshake, authentication MAY be requested at the MSRP protocol level by an MSRP Server challenging AUTH requests using a 401 response. Therefore, an MSRP WebSocket Client SHOULD support HTTP Digest [RFC7235] authentication as stated in [RFC4976].8. Examples8.1. Authentication8.1.1. WebSocket Authentication Alice (MSRP WSS) a.example.com | | |HTTP GET (WS handshake) F1 | |---------------------------->| |101 Switching Protocols F2 | |<----------------------------| | | |AUTH F3 | |---------------------------->| |200 OK F4 | |<----------------------------| | | Alice loads a web page using her web browser and retrieves JavaScript code implementing the WebSocket MSRP subprotocol defined in this document. The JavaScript code (an MSRP WebSocket Client) establishes a secure WebSocket connection with an MSRP relay (an MSRP WebSocket Server) at a.example.com. Upon WebSocket connection, Alice constructs and sends an MSRP AUTH request. Since the JavaScript stack in a browser has no way to determine the local address from which the WebSocket connection was made, this implementation uses a random ".invalid" domain name for the hostpart of the From-Path URI (seeAppendix A).Dunkley, et al. Standards Track [Page 10]
RFC 7977 WebSocket as a Transport for MSRP September 2016 In this example, it is assumed that authentication is performed at the WebSocket layer (not shown), so no challenge is issued for the MSRP AUTH message: F1 HTTP GET (WS handshake) Alice -> a.example.com (TLS) GET / HTTP/1.1 Host: a.example.com Upgrade: websocket Connection: Upgrade Sec-WebSocket-Key: dGhlIHNhbXBsZSBub25jZQ== Origin: https://www.example.com Sec-WebSocket-Protocol: msrp Sec-WebSocket-Version: 13 F2 101 Switching Protocols a.example.com -> Alice (TLS) HTTP/1.1 101 Switching Protocols Upgrade: websocket Connection: Upgrade Sec-WebSocket-Accept: s3pPLMBiTxaQ9kYGzzhZRbK+xOo= Sec-WebSocket-Protocol: msrp F3 AUTH Alice -> a.example.com (transport WSS) MSRP 49fi AUTH To-Path: msrps://alice@a.example.com:443;ws From-Path: msrps://df7jal23ls0d.invalid:2855/98cjs;ws -------49fi$ F4 200 OK a.example.com -> Alice (transport WSS) MSRP 49fi 200 OK To-Path: msrps://df7jal23ls0d.invalid:2855/98cjs;ws From-Path: msrps://alice@a.example.com:443;ws Use-Path: msrps://a.example.com:2855/jui787s2f;tcp Expires: 900 -------49fi$Dunkley, et al. Standards Track [Page 11]
RFC 7977 WebSocket as a Transport for MSRP September 20168.1.2. MSRP Authentication Alice (MSRP WSS) a.example.com | | |HTTP GET (WS handshake) F1 | |---------------------------->| |101 Switching Protocols F2 | |<----------------------------| | | |AUTH F3 | |---------------------------->| |401 Unauthorized F4 | |<----------------------------| |AUTH F5 | |---------------------------->| |200 OK F6 | |<----------------------------| | | This example uses the same scenario asSection 8.1.1 but with authentication performed at the MSRP layer. Note that MSRP does not permit line folding. A "\" in the examples shows a line continuation due to limitations in line length of this document. Neither the backslash nor the extra CRLF is included in the actual MSRP message. F1 HTTP GET (WS handshake) Alice -> a.example.com (TLS) GET / HTTP/1.1 Host: a.example.com Upgrade: websocket Connection: Upgrade Sec-WebSocket-Key: dGhlIHNhbXBsZSBub25jZQ== Origin: https://www.example.com Sec-WebSocket-Protocol: msrp Sec-WebSocket-Version: 13 F2 101 Switching Protocols a.example.com -> Alice (TLS) HTTP/1.1 101 Switching Protocols Upgrade: websocket Connection: Upgrade Sec-WebSocket-Accept: s3pPLMBiTxaQ9kYGzzhZRbK+xOo= Sec-WebSocket-Protocol: msrpDunkley, et al. Standards Track [Page 12]
RFC 7977 WebSocket as a Transport for MSRP September 2016 F3 AUTH Alice -> a.example.com (transport WSS) MSRP 4rsxt9nz AUTH To-Path: msrps://alice@a.example.com:443;ws From-Path: msrps://df7jal23ls0d.invalid:2855/98cjs;ws -------4rsxt9nz$ F4 401 Unauthorized a.example.com -> Alice (transport WSS) MSRP 4rsxt9nz 401 Unauthorized To-Path: msrps://df7jal23ls0d.invalid:2855/98cjs;ws From-Path: msrps://alice@a.example.com:443;ws WWW-Authenticate: Digest realm="example.com", \ nonce="UvtfpVL7XnnJ63EE244fXDthfLihlMHOY4+dd4A=", qop="auth" -------4rsxt9nz$ F5 AUTH Alice -> a.example.com (transport WSS) MSRP qy1hsow5 AUTH To-Path: msrps://alice@a.example.com:443;ws From-Path: msrps://df7jal23ls0d.invalid:2855/98cjs;ws Authorization: Digest username="alice", realm="example.com", \ nonce="UvtfpVL7XnnJ63EE244fXDthfLihlMHOY4+dd4A=", \ uri="msrps://alice@a.example.com:443;ws", \ response="5011d0d58fe975e0d0cdc007ae26f4b7", \ qop=auth, cnonce="zic5ml401prb", nc=00000001 -------qy1hsow5$ F6 200 OK a.example.com -> Alice (transport WSS) MSRP qy1hsow5 200 OK To-Path: msrps://df7jal23ls0d.invalid:2855/98cjs;ws From-Path: msrps://alice@a.example.com:443;ws Use-Path: msrps://a.example.com:2855/jui787s2f;tcp Expires: 900 -------qy1hsow5$Dunkley, et al. Standards Track [Page 13]
RFC 7977 WebSocket as a Transport for MSRP September 20168.2. Example Session: MSRP WebSocket Client to MSRP Client The following subsections show various message exchanges occurring during the course of an MSRP session between a WebSocket client and a non-WebSocket client.8.2.1. SDP Exchange The following example shows SDP that could be included in a SIP message to set up an MSRP session between Alice and Bob where Alice uses a WebSocket MSRP relay and Bob uses a traditional MSRP client without a relay. A "\" in the examples shows a line continuation due to limitations in line length of this document. Neither the backslash nor the extra CRLF is included in the actual SDP. Alice makes an offer with a path including the relay (having already successfully authenticated with the relay): c=IN IP4 a.example.com m=message 1234 TCP/TLS/MSRP * a=accept-types:message/cpim text/plain text/html a=path:msrps://a.example.com:2855/jui787s2f;tcp \ msrps://df7jal23ls0d.invalid:2855/98cjs;ws In this offer, Alice wishes to receive MSRP messages via the relay at a.example.com. She wants to use TLS as the transport for the MSRP session (beyond the relay). She can accept message/cpim, text/plain, and text/html message bodies in SEND requests. Bob's answer to this offer could look like: c=IN IP4 bob.example.com m=message 1234 TCP/TLS/MSRP * a=accept-types:message/cpim text/plain a=path:msrps://bob.example.com:49154/foo;tcp Here, Bob wishes to receive the MSRP messages at bob.example.com. He can accept only message/cpim and text/plain message bodies in SEND requests and has rejected the text/html content offered by Alice. He does not need a relay to set up the MSRP session.Dunkley, et al. Standards Track [Page 14]
RFC 7977 WebSocket as a Transport for MSRP September 20168.2.2. SEND (MSRP WebSocket Client to MSRP Client) Alice (MSRP WSS) a.example.com (MSRP TLS) Bob | | | |SEND F1 | | |---------------------------->| | |200 OK F2 | | |<----------------------------| | | |SEND F3 | | |---------------------------->| | |200 OK F4 | | |<----------------------------| Later in the session, Alice sends an instant message to Bob. The MSRP WebSocket Server at a.example.com acts as an MSRP relay, routing the message to Bob over TLS. Message details (A "\" in the examples shows a line continuation due to limitations in line length of this document. Neither the backslash nor the extra CRLF is included in the actual request or response): F1 SEND Alice -> a.example.com (transport WSS) MSRP 6aef SEND To-Path: msrps://a.example.com:2855/jui787s2f;tcp \ msrps://bob.example.com:49154/foo;tcp From-Path: msrps://df7jal23ls0d.invalid:2855/98cjs;ws Success-Report: no Byte-Range: 1-*/* Message-ID: 87652 Content-Type: text/plain Hi Bob, I'm about to send you file.mpeg -------6aef$ F2 200 OK a.example.com -> Alice (transport WSS) MSRP 6aef 200 OK To-Path: msrps://df7jal23ls0d.invalid:2855/98cjs;ws From-Path: msrps://a.example.com:2855/jui787s2f;tcp -------6aef$Dunkley, et al. Standards Track [Page 15]
RFC 7977 WebSocket as a Transport for MSRP September 2016 F3 SEND a.example.com -> Bob (transport TLS) MSRP juh76 SEND To-Path: msrps://bob.example.com:49154/foo;tcp From-Path: msrps://a.example.com:2855/jui787s2f;tcp \ msrps://df7jal23ls0d.invalid:2855/98cjs;ws Success-Report: no Byte-Range: 1-*/* Message-ID: 87652 Content-Type: text/plain Hi Bob, I'm about to send you file.mpeg -------juh76$ F4 200 OK Bob -> a.example.com (transport TLS) MSRP juh76 200 OK To-Path: msrps://a.example.com:2855/jui787s2f;tcp From-Path: msrps://bob.example.com:49154/foo;tcp -------juh76$8.2.3. SEND (MSRP Client to MSRP WebSocket Client) Bob (MSRP TLS) a.example.com (MSRP WSS) Alice | | | |SEND F1 | | |---------------------------->| | |200 OK F2 | | |<----------------------------| | | |SEND F3 | | |---------------------------->| | |200 OK F4 | | |<----------------------------| Later in the session, Bob sends an instant message to Alice. The MSRP WebSocket Server at a.example.com acts as an MSRP relay, routing the message to Alice over secure WebSocket.Dunkley, et al. Standards Track [Page 16]
RFC 7977 WebSocket as a Transport for MSRP September 2016 Message details (A "\" in the examples shows a line continuation due to limitations in line length of this document. Neither the backslash nor the extra CRLF is included in the actual request or response): F1 SEND Bob -> a.example.com (transport TLS) MSRP xght6 SEND To-Path: msrps://a.example.com:2855/jui787s2f;tcp \ msrps://df7jal23ls0d.invalid:2855/98cjs;ws From-Path: msrps://bob.example.com:49154/foo;tcp Success-Report: no Byte-Range: 1-*/* Message-ID: 87652 Content-Type: text/plain Thanks for the file. -------xght6$ F2 200 OK a.example.com -> Bob (transport TLS) MSRP xght6 200 OK To-Path: msrps://bob.example.com:49154/foo;tcp From-Path: msrps://a.example.com:2855/jui787s2f;tcp -------xght6$ F3 SEND a.example.com -> Alice (transport WSS) MSRP yh67 SEND To-Path: msrps://df7jal23ls0d.invalid:2855/98cjs;ws From-Path: msrps://a.example.com:2855/jui787s2f;tcp \ msrps://bob.example.com:49154/foo;tcp Success-Report: no Byte-Range: 1-*/* Message-ID: 87652 Content-Type: text/plain Thanks for the file. -------yh67$Dunkley, et al. Standards Track [Page 17]
RFC 7977 WebSocket as a Transport for MSRP September 2016 F4 200 OK Alice -> a.example.com (transport WSS) MSRP yh67 200 OK To-Path: msrps://a.example.com:2855/jui787s2f;tcp From-Path: msrps://df7jal23ls0d.invalid:2855/98cjs;ws -------yh67$8.3. Example Session: Two MSRP WebSocket Clients The following subsections show various message exchanges occurring during the course of an MSRP session between two WebSocket clients.8.3.1. SDP Exchange The following example shows SDP that could be included in a SIP message to set up an MSRP session between Alice and Carol where both of them are using the same WebSocket MSRP relay. Alice makes an offer with a path including the relay (having already successfully authenticated with the relay): c=IN IP4 a.example.com m=message 1234 TCP/TLS/MSRP * a=accept-types:message/cpim text/plain text/html a=path:msrps://a.example.com:2855/jui787s2f;tcp \ msrps://df7jal23ls0d.invalid:2855/98cjs;ws In this offer, Alice wishes to receive MSRP messages via the relay at a.example.com. She wants to use TLS as the transport for the MSRP session (beyond the relay). She can accept message/cpim, text/plain, and text/html message bodies in SEND requests. Carol's answer to this offer could look like: c=IN IP4 a.example.com m=message 1234 TCP/TLS/MSRP * a=accept-types:message/cpim text/plain a=path:msrps://a.example.com:2855/iwnslt;tcp \ msrps://jk9awp14vj8x.invalid:2855/76qwe;ws Here, Carol also wishes to receive the MSRP messages via a.example.com. She can accept only message/cpim and text/plain message bodies in SEND requests and has rejected the text/html content offered by Alice.Dunkley, et al. Standards Track [Page 18]
RFC 7977 WebSocket as a Transport for MSRP September 20168.3.2. SEND Alice (MSRP WSS) a.example.com (MSRP WSS) Carol | | | |SEND F1 | | |---------------------------->| | |200 OK F2 | | |<----------------------------| | | |SEND F3 | | |---------------------------->| | |200 OK F4 | | |<----------------------------| Later in the session, Alice sends an instant message to Carol. The MSRP WebSocket Server at a.example.com acts as an MSRP relay, routing the message to Carol over secure WebSocket. In this example, both Alice and Carol are using MSRP WebSocket Clients and the same MSRP WebSocket Server. This means that a.example.com will appear twice in the To-Path in F1. a.example.com can either handle this internally or loop the MSRP SEND request back to itself as if it were two separate MSRP relays. Message details (A "\" in the examples shows a line continuation due to limitations in line length of this document. Neither the backslash nor the extra CRLF is included in the actual request or response): F1 SEND Alice -> a.example.com (transport WSS) MSRP kjh6 SEND To-Path: msrps://a.example.com:2855/jui787s2f;tcp \ msrps://a.example.com:2855/iwnslt;tcp \ msrps://jk9awp14vj8x.invalid:2855/76qwe;ws From-Path: msrps://df7jal23ls0d.invalid:2855/98cjs;ws Success-Report: no Byte-Range: 1-*/* Message-ID: 87652 Content-Type: text/plain Carol, I sent that file to Bob. -------kjh6$Dunkley, et al. Standards Track [Page 19]
RFC 7977 WebSocket as a Transport for MSRP September 2016 F2 200 OK a.example.com -> Alice (transport WSS) MSRP kjh6 200 OK To-Path: msrps://df7jal23ls0d.invalid:2855/98cjs;ws From-Path: msrps://a.example.com:2855/jui787s2f;tcp -------kjh6$ F3 SEND a.example.com -> Carol (transport WSS) MSRP re58 SEND To-Path: msrps://jk9awp14vj8x.invalid:2855/76qwe;ws From-Path: msrps://a.example.com:2855/iwnslt;tcp \ msrps://a.example.com:2855/jui787s2f;tcp \ msrps://df7jal23ls0d.invalid/98cjs;ws Success-Report: no Byte-Range: 1-*/* Message-ID: 87652 Content-Type: text/plain Carol, I sent that file to Bob. -------re58$ F4 200 OK Carol -> a.example.com (transport WSS) MSRP re58 200 OK To-Path: msrps://a.example.com:2855/iwnslt;tcp From-Path: msrps://jk9awp14vj8x.invalid:2855/76qwe;ws -------re58$8.4. Example Session: MSRP WebSocket Client to MSRP Client Using a Relay The following subsections show various message exchanges occurring during the course of an MSRP session between a WebSocket client and a non-WebSocket client, where the latter is also using an MSRP relay.8.4.1. SDP Exchange The following example shows SDP that could be included in a SIP message to set up an MSRP session between Alice and Bob where Alice uses a WebSocket MSRP relay and Bob uses a traditional MSRP client with a separate relay.Dunkley, et al. Standards Track [Page 20]
RFC 7977 WebSocket as a Transport for MSRP September 2016 Alice makes an offer with a path including the relay (having already successfully authenticated with the relay): c=IN IP4 a.example.com m=message 1234 TCP/TLS/MSRP * a=accept-types:message/cpim text/plain text/html a=path:msrps://a.example.com:2855/jui787s2f;tcp \ msrps://df7jal23ls0d.invalid:2855/98cjs;ws In this offer, Alice wishes to receive MSRP messages via the relay at a.example.com. She wants to use TLS as the transport for the MSRP session (beyond the relay). She can accept message/cpim, text/plain, and text/html message bodies in SEND requests. Bob's answer to this offer could look like: c=IN IP4 bob.example.com m=message 1234 TCP/TLS/MSRP * a=accept-types:message/cpim text/plain a=path:msrps://relay.example.net:2855/kwvin5f;tcp \ msrps://bob.example.com:49154/foo;tcp Here, Bob wishes to receive the MSRP messages via the relay at relay.example.net. He can accept only message/cpim and text/plain message bodies in SEND requests and has rejected the text/html content offered by Alice.8.4.2. SEND Alice (MSRP WSS) a.example.com (MSRP) relay.example.net (MSRP) Bob | | | | |SEND F1 | | | |--------------------->| | | |200 OK F2 | | | |<---------------------| | | | |SEND F3 | | | |---------------------->| | | |200 OK F4 | | | |<----------------------| | | | |SEND F5 | | | |------------------->| | | |200 OK F6 | | | |<-------------------| Later in the session, Alice sends an instant message to Bob. The MSRP WebSocket Server at a.example.com acts as an MSRP relay, routing the message to Bob via his relay, relay.example.net.Dunkley, et al. Standards Track [Page 21]
RFC 7977 WebSocket as a Transport for MSRP September 2016 Message details (A "\" in the examples shows a line continuation due to limitations in line length of this document. Neither the backslash nor the extra CRLF is included in the actual request or response): F1 SEND Alice -> a.example.com (transport WSS) MSRP Ycwt SEND To-Path: msrps://a.example.com:2855/jui787s2f;tcp \ msrps://relay.example.net:2855/kwvin5f;tcp \ msrps://bob.example.com:49154/foo;tcp From-Path: msrps://df7jal23ls0d.invalid:2855/98cjs;ws Success-Report: no Byte-Range: 1-*/* Message-ID: 87652 Content-Type: text/plain Bob, that was the wrong file - don't watch it! -------Ycwt$ F2 200 OK a.example.com -> Alice (transport WSS) MSRP Ycwt 200 OK To-Path: msrps://df7jal23ls0d.invalid:2855/98cjs;ws From-Path: msrps://a.example.com:2855/jui787s2f;tcp -------Ycwt$ F3 SEND a.example.com -> relay.example.net (transport TLS) MSRP 13GA SEND To-Path: msrps://relay.example.net:2855/kwvin5f;tcp \ msrps://bob.example.com:49154/foo;tcp From-Path: msrps://a.example.com:2855/jui787s2f;tcp \ msrps://df7jal23ls0d.invalid/98cjs;ws Success-Report: no Byte-Range: 1-*/* Message-ID: 87652 Content-Type: text/plain Bob, that was the wrong file - don't watch it! -------13GA$Dunkley, et al. Standards Track [Page 22]
RFC 7977 WebSocket as a Transport for MSRP September 2016 F4 200 OK relay.example.net -> a.example.com (transport TLS) MSRP 13GA 200 OK To-Path: msrps://a.example.com:2855/iwnslt;tcp From-Path: msrps://relay.example.net:2855/kwvin5f;tcp -------13GA$ F5 SEND relay.example.net -> bob.example.com (transport TLS) MSRP kXeg SEND To-Path: msrps://bob.example.com:49154/foo;tcp From-Path: msrps://relay.example.net:2855/kwvin5f;tcp \ msrps://a.example.com:2855/jui787s2f;tcp \ msrps://df7jal23ls0d.invalid/98cjs;ws Success-Report: no Byte-Range: 1-*/* Message-ID: 87652 Content-Type: text/plain Bob, that was the wrong file - don't watch it! -------kXeg$ F6 200 OK bob.example.com -> relay.example.net (transport TLS) MSRP kXeg 200 OK To-Path: msrps://relay.example.net:2855/kwvin5f;tcp From-Path: msrps://bob.example.com:49154/foo;tcp -------kXeg$Dunkley, et al. Standards Track [Page 23]
RFC 7977 WebSocket as a Transport for MSRP September 20169. Security Considerations MSRP traffic transported over WebSockets MUST be protected by using a secure WebSocket connection (using TLS [RFC5246] over TCP). When establishing a connection using MSRP over secure WebSockets, the client MUST authenticate the server using the server's certificate according to the WebSocket validation procedure in [RFC6455]. Any security considerations specific to the WebSocket protocol are detailed in the relevant specification [RFC6455] and are considered outside the scope of this document. The certificate name matching (described by [RFC6455]) and cryptosuite selection will be handled by the browser, and the browser's procedures will supersede those specified in [RFC4975]. Since the TLS session is always terminated at the MSRP WebSocket Server and the WebSocket server can see the plain text, the MSRP client (browser) SHOULD NOT indicate end-to-end security to user. TLS, as used in this document, should follow the best current practices defined in [RFC7525].10. IANA Considerations Per this specification, IANA has registered the WebSocket MSRP subprotocol in the "WebSocket Subprotocol Name Registry" with the following data: Subprotocol Identifier: msrp Subprotocol Common Name: WebSocket Transport for MSRP (Message Session Relay Protocol) Subprotocol Definition:RFC 7977 Reference:RFC 7977Dunkley, et al. Standards Track [Page 24]
RFC 7977 WebSocket as a Transport for MSRP September 201611. References11.1. Normative References [RFC2119] Bradner, S., "Key words for use in RFCs to Indicate Requirement Levels",BCP 14,RFC 2119, DOI 10.17487/RFC2119, March 1997, <http://www.rfc-editor.org/info/rfc2119>. [RFC4975] Campbell, B., Ed., Mahy, R., Ed., and C. Jennings, Ed., "The Message Session Relay Protocol (MSRP)",RFC 4975, DOI 10.17487/RFC4975, September 2007, <http://www.rfc-editor.org/info/rfc4975>. [RFC4976] Jennings, C., Mahy, R., and A. Roach, "Relay Extensions for the Message Sessions Relay Protocol (MSRP)",RFC 4976, DOI 10.17487/RFC4976, September 2007, <http://www.rfc-editor.org/info/rfc4976>. [RFC5234] Crocker, D., Ed. and P. Overell, "Augmented BNF for Syntax Specifications: ABNF", STD 68,RFC 5234, DOI 10.17487/RFC5234, January 2008, <http://www.rfc-editor.org/info/rfc5234>. [RFC6455] Fette, I. and A. Melnikov, "The WebSocket Protocol",RFC 6455, DOI 10.17487/RFC6455, December 2011, <http://www.rfc-editor.org/info/rfc6455>.11.2. Informative References [CORS] van Kesteren, A., Ed., "Cross-Origin Resource Sharing", W3C Recommendation, January 2014, <http://www.w3.org/TR/2014/REC-cors-20140116/>. [RFC2606] Eastlake 3rd, D. and A. Panitz, "Reserved Top Level DNS Names",BCP 32,RFC 2606, DOI 10.17487/RFC2606, June 1999, <http://www.rfc-editor.org/info/rfc2606>. [RFC3986] Berners-Lee, T., Fielding, R., and L. Masinter, "Uniform Resource Identifier (URI): Generic Syntax", STD 66,RFC 3986, DOI 10.17487/RFC3986, January 2005, <http://www.rfc-editor.org/info/rfc3986>. [RFC5246] Dierks, T. and E. Rescorla, "The Transport Layer Security (TLS) Protocol Version 1.2",RFC 5246, DOI 10.17487/RFC5246, August 2008, <http://www.rfc-editor.org/info/rfc5246>.Dunkley, et al. Standards Track [Page 25]
RFC 7977 WebSocket as a Transport for MSRP September 2016 [RFC6265] Barth, A., "HTTP State Management Mechanism",RFC 6265, DOI 10.17487/RFC6265, April 2011, <http://www.rfc-editor.org/info/rfc6265>. [RFC6454] Barth, A., "The Web Origin Concept",RFC 6454, DOI 10.17487/RFC6454, December 2011, <http://www.rfc-editor.org/info/rfc6454>. [RFC6714] Holmberg, C., Blau, S., and E. Burger, "Connection Establishment for Media Anchoring (CEMA) for the Message Session Relay Protocol (MSRP)",RFC 6714, DOI 10.17487/RFC6714, August 2012, <http://www.rfc-editor.org/info/rfc6714>. [RFC7118] Baz Castillo, I., Millan Villegas, J., and V. Pascual, "The WebSocket Protocol as a Transport for the Session Initiation Protocol (SIP)",RFC 7118, DOI 10.17487/RFC7118, January 2014, <http://www.rfc-editor.org/info/rfc7118>. [RFC7230] Fielding, R., Ed. and J. Reschke, Ed., "Hypertext Transfer Protocol (HTTP/1.1): Message Syntax and Routing",RFC 7230, DOI 10.17487/RFC7230, June 2014, <http://www.rfc-editor.org/info/rfc7230>. [RFC7235] Fielding, R., Ed. and J. Reschke, Ed., "Hypertext Transfer Protocol (HTTP/1.1): Authentication",RFC 7235, DOI 10.17487/RFC7235, June 2014, <http://www.rfc-editor.org/info/rfc7235>. [RFC7525] Sheffer, Y., Holz, R., and P. Saint-Andre, "Recommendations for Secure Use of Transport Layer Security (TLS) and Datagram Transport Layer Security (DTLS)",BCP 195,RFC 7525, DOI 10.17487/RFC7525, May 2015, <http://www.rfc-editor.org/info/rfc7525>. [WS-API] Hickson, I., Ed., "The WebSocket API", W3C Candidate Recommendation, September 2012, <https://www.w3.org/TR/2012/CR-websockets-20120920/>.Dunkley, et al. Standards Track [Page 26]
RFC 7977 WebSocket as a Transport for MSRP September 2016Appendix A. Implementation Guidelines: MSRP WebSocket Client Considerations The JavaScript stack in web browsers does not have the ability to discover the local transport address used for originating WebSocket connections. Therefore, the MSRP WebSocket Client constructs a domain name consisting of a random token followed by the ".invalid" top-level domain name, as stated in [RFC2606], and uses it within its From-Path headers. The From-Path URI provided by MSRP clients that use an MSRP relay is not used for routing MSRP messages, thus, it is safe to set a random domain in the hostpart of the From-Path URI.Acknowledgements Special thanks to Inaki Baz Castillo, Jose Luis Millan Villegas, and Victor Pascual, the authors of [RFC7118], which has inspired this document. Additional thanks to Inaki Baz Castillo, who pointed out that "web browser" shouldn't be used all the time, as this specification should be valid for smartphones and apps other than browsers and suggested clarifications to the SDP handling for MSRP over WebSocket. Special thanks to James Wyatt from Crocodile RCS Ltd for helping with the JavaScript MSRP-over-WebSockets prototyping. Special thanks to Anton Roman who has contributed to this document. Thanks to Saul Ibarra Corretge for suggesting that the existing MSRP keepalive mechanism may be used when WebSocket pings are not available. Thanks to Ben Campbell, Inaki Baz Castillo, Keith Drage, Olle Johansson, and Christer Holmberg for their thoughtful discussion comments and review feedback that led to the improvement of this document. Special thanks to Mary Barnes for both her technical review and for offering to act as Document Shepherd. Thanks also to Stephen Farrell, Alissa Cooper, Mirja Kuehlewind, Allison Mankin, Alexey Melnikov, and Kathleen Moriarty for their review comments.Dunkley, et al. Standards Track [Page 27]
RFC 7977 WebSocket as a Transport for MSRP September 2016Authors' Addresses Peter Dunkley Xura Lancaster Court 8 Barnes Wallis Road Fareham PO15 5TU United Kingdom Email: peter.dunkley@xura.com Gavin Llewellyn Xura Lancaster Court 8 Barnes Wallis Road Fareham PO15 5TU United Kingdom Email: gavin.llewellyn@xura.com Victor Pascual Oracle Email: victor.pascual.avila@oracle.com Gonzalo Salgueiro Cisco Systems, Inc. 7200-12 Kit Creek Road Research Triangle Park, NC 27709 United States of America Email: gsalguei@cisco.com Ram Mohan Ravindranath Cisco Systems, Inc. Email: rmohanr@cisco.comDunkley, et al. Standards Track [Page 28]
[8]ページ先頭