Movatterモバイル変換


[0]ホーム

URL:


[RFC Home] [TEXT|PDF|HTML] [Tracker] [IPR] [Errata] [Info page]

INFORMATIONAL
Errata Exist
Internet Engineering Task Force (IETF)                M. Montemurro, Ed.Request for Comments: 7254                                      A. AllenCategory: Informational                                       BlackberryISSN: 2070-1721                                              D. McDonald                                                                  Eircom                                                               P. Gosden                                                         GSM Association                                                                May 2014A Uniform Resource Name Namespacefor the Global System for Mobile Communications Association (GSMA)and the International Mobile station Equipment Identity (IMEI)Abstract   This specification defines a Uniform Resource Name (URN) namespace   for the Global System for Mobile Communications Association (GSMA)   and a Namespace Specific String (NSS) for the International Mobile   station Equipment Identity (IMEI), as well as an associated parameter   for the International Mobile station Equipment Identity and Software   Version number (IMEISV).  The IMEI and IMEISV were introduced as part   of the specification for the GSM and are also now incorporated by the   3rd Generation Partnership Project (3GPP) as part of the 3GPP   specification for GSM, Universal Mobile Telecommunications System   (UMTS), and 3GPP Long Term Evolution (LTE) networks.  The IMEI and   IMEISV are used to uniquely identify Mobile Equipment within these   systems and are managed by the GSMA.  URNs from this namespace almost   always contain personally identifiable information and need to be   treated accordingly.Status of This Memo   This document is not an Internet Standards Track specification; it is   published for informational purposes.   This document is a product of the Internet Engineering Task Force   (IETF).  It represents the consensus of the IETF community.  It has   received public review and has been approved for publication by the   Internet Engineering Steering Group (IESG).  Not all documents   approved by the IESG are a candidate for any level of Internet   Standard; seeSection 2 of RFC 5741.   Information about the current status of this document, any errata,   and how to provide feedback on it may be obtained athttp://www.rfc-editor.org/info/rfc7254.Montemurro, et al.            Informational                     [Page 1]

RFC 7254                  The GSMA and IMEI URN                 May 2014Copyright Notice   Copyright (c) 2014 IETF Trust and the persons identified as the   document authors.  All rights reserved.   This document is subject toBCP 78 and the IETF Trust's Legal   Provisions Relating to IETF Documents   (http://trustee.ietf.org/license-info) in effect on the date of   publication of this document.  Please review these documents   carefully, as they describe your rights and restrictions with respect   to this document.  Code Components extracted from this document must   include Simplified BSD License text as described in Section 4.e of   the Trust Legal Provisions and are provided without warranty as   described in the Simplified BSD License.   This document may contain material from IETF Documents or IETF   Contributions published or made publicly available before November   10, 2008.  The person(s) controlling the copyright in some of this   material may not have granted the IETF Trust the right to allow   modifications of such material outside the IETF Standards Process.   Without obtaining an adequate license from the person(s) controlling   the copyright in such materials, this document may not be modified   outside the IETF Standards Process, and derivative works of it may   not be created outside the IETF Standards Process, except to format   it for publication as an RFC or to translate it into languages other   than English.Montemurro, et al.            Informational                     [Page 2]

RFC 7254                  The GSMA and IMEI URN                 May 2014Table of Contents1. Introduction ....................................................32. Terminology .....................................................43. Namespace Registration Template .................................44. Specification ...................................................84.1. IMEI Parameters ............................................84.2. IMEI Format ................................................94.2.1. Type Allocation Code (TAC) ..........................94.2.2. Serial Number (SNR) .................................94.2.3. Spare ..............................................104.2.4. Binary Encoding ....................................104.3. IMEISV Format .............................................104.3.1. Type Allocation Code (TAC) .........................104.3.2. Serial Number (SNR) ................................114.3.3. Software Version Number (SVN) ......................114.3.4. Binary Encoding ....................................115. Community Considerations .......................................116. Namespace Considerations .......................................127. IANA Considerations ............................................128. Security and Privacy Considerations ............................129. Acknowledgements ...............................................1410. References ....................................................1410.1. Normative References .....................................1410.2. Informative References ...................................151.  Introduction   This specification defines a Uniform Resource Name (URN) namespace   for the Global System for Mobile Communications Association (GSMA)   and a Namespace Specific String (NSS) for the International Mobile   station Equipment Identity (IMEI), as well as an associated parameter   for the International Mobile station Equipment Identity and Software   Version number (IMEISV) as per the namespace registration requirement   found inRFC 3406 [1].  The Namespace Identifier (NID) 'gsma' is for   identities used in GSM, Universal Mobile Telecommunications System   (UMTS), and Long Term Evolution (LTE) networks.  The IMEI and the   IMEISV are managed by the GSMA, so this NID is managed by the GSMA.   While this specification currently defines only the 'imei' NSS under   the 'gsma' NID, additional NSS under the 'gsma' NID may be specified   in the future by the GSMA, using the procedure for URN NSS changes   and additions (currently through the publication of future   Informational RFCs approved by IETF consensus).Montemurro, et al.            Informational                     [Page 3]

RFC 7254                  The GSMA and IMEI URN                 May 2014   The IMEI is 15 decimal digits long and includes a Type Allocation   Code (TAC) of 8 decimal digits and a Serial Number (SNR) of 6 decimal   digits plus a Spare decimal digit.  The TAC identifies the type of   the Mobile Equipment and is chosen from a range of values allocated   to the Mobile Equipment manufacturer in order to uniquely identify   the model of the Mobile Equipment.  The SNR is an individual serial   number that uniquely identifies each Mobile Equipment device within   the TAC.  The Spare digit is used as a Check digit to validate the   IMEI and is always set to the value 0 when transmitted by the Mobile   Equipment.   The IMEISV is 16 decimal digits long and includes the TAC and SNR,   same as for the IMEI, but also includes a 2 decimal digit Software   Version Number (SVN), which is allocated by the Mobile Equipment   manufacturer to identify the software version of the Mobile   Equipment.   The information here is meant to be a concise guide for those wishing   to use the IMEI and IMEISV as URNs.  Nothing in this document should   be construed to override 3GPP Technical Specification (TS) 23.003   [2], which specifies the IMEI and IMEISV.   The GSMA is a global trade association representing nearly 800 mobile   phone operators across 220 territories and countries of the world.   The primary goals of the GSMA are to ensure that mobile phones and   wireless services work globally and are easily accessible.  Further   details about the GSMA's role in allocating the IMEI and the IMEISV,   as well as the IMEI and IMEISV allocation guidelines, can be found in   GSMA Permanent Reference Document (PRD) TS.06 [3].2.  Terminology   The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT",   "SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL" in this   document are to be interpreted as described inRFC 2119 [4].3.  Namespace Registration Template   Namespace ID:  'gsma'   Registration Information:   Registration version number:  1   Registration date:  2014-01-12Montemurro, et al.            Informational                     [Page 4]

RFC 7254                  The GSMA and IMEI URN                 May 2014   Declared registrant of the namespace:   Registering organization:   Name:  GSM Association   Address:  1st Floor, Mid City Place,      71 High Holborn, London, England   Designated contact person:   Name:  Paul Gosden   Coordinates:  pgosden@gsma.com   Declaration of syntactic structure:      The identifier is expressed in American Standard Code for      Information Interchange (ASCII) characters and has a hierarchical      structure expressed using the Augmented Backus-Naur Form (ABNF)      defined inRFC 5234 [5], as follows:         gsma-urn              = "urn:" gsma-NID ":" gsma-NSS         gsma-NID              = "gsma"         gsma-NSS              = imei-specifier / future-gsma-specifier         imei-specifier        = "imei:" ( imeival / ext-imei )                                              [ ";" sw-version-param ]                                              [ ";" imei-version-param ]         ext-imei = gsma-defined-nonempty ;GSMA defined and                                          ;IETF consensus                                          ;required         sw-version-param      = "svn=" software-version         imei-version-param    = "vers=" imei-version-val         software-version      = 2DIGIT         imei-version-val      = DIGIT         future-gsma-specifier = future-specifier                                           *( ";" future-param )         future-specifier      = gsma-defined-nonempty ;GSMA defined         future-param          = par-name [ EQUAL par-value ]         par-name              = gsma-defined-nonempty         par-value             = gsma-defined-nonempty         EQUAL                 = "="         gsma-defined-nonempty = 1*gsma-urn-char         gsma-urn-char         = ALPHA / DIGIT                                 / "-" / "." / "_" / "%" / ":"Montemurro, et al.            Informational                     [Page 5]

RFC 7254                  The GSMA and IMEI URN                 May 2014      An NSS for the IMEI is defined under the 'gsma' NID.      An IMEI is an identifier under the 'gsma' NID that uniquely      identifies the mobile devices used in the GSM, UMTS, and LTE      networks.      The representation of the IMEI is defined in 3GPP TS 23.003 [2].      To accurately represent an IMEI received in a cellular signaling      message (see 3GPP TS 24.008 [6]) as a URN, it is necessary to      convert the received binary (Binary Coded Decimal (BCD)) encoded      bit sequence to a decimal digit string representation.  Each field      has its representation for humans as a decimal digit string with      the most significant digit first.      The following ABNF includes the set of core rules inRFC 5234 [5];      the core rules are not repeated here.      A URN with the 'imei' NSS contains one 'imeival', and its formal      definition is provided by the following ABNF (RFC 5234) [5]:      imeival  =  tac "-" snr "-" spare      tac      = 8DIGIT      snr      = 6DIGIT      spare    = DIGIT      <future-gsma-specifier> and <gsma-defined-nonempty> can comprise      any ASCII characters compliant with the above ABNF.      The GSMA will take responsibility for the 'gsma' namespace,      including the 'imei' NSS.      Additional NSS may be added for future identifiers needed by the      GSMA, at their discretion.  Only URNs with the 'imei' NSS are      considered to be "GSMA IMEI URNs", and use in IETF protocols of      other NSS that might be defined in the future will require IETF      consensus.   Relevant ancillary documentation:      See IMEI Allocation and Approval Guidelines (GSMA PRD TS.06) [3]      and 3GPP TS 23.003 [2].Montemurro, et al.            Informational                     [Page 6]

RFC 7254                  The GSMA and IMEI URN                 May 2014   Identifier uniqueness considerations:      Identifiers under the 'gsma' NID are defined and assigned by the      GSMA after ensuring that the URNs to be assigned are unique.      Uniqueness is achieved by checking against the IANA registry of      previously assigned names.      Procedures are in place to ensure that each IMEI is uniquely      assigned by the Mobile Equipment manufacturer so that it is      guaranteed to uniquely identify that particular Mobile Equipment      device.      Procedures are in place to ensure that each IMEISV is uniquely      assigned by the Mobile Equipment manufacturer so that it is      guaranteed to uniquely identify that particular Mobile Equipment      device and the specific software version installed.   Identifier persistence considerations:      The GSMA is committed to maintaining uniqueness and persistence of      all resources identified by assigned URNs.      As the NID sought is 'gsma' and "GSMA" is the long-standing      acronym for the trade association that represents the mobile phone      operators, the URN should also persist indefinitely (at least as      long as there is a need for its use).  The assignment process      guarantees that names are not reassigned.  The binding between the      name and its resource is permanent.      The TAC and SNR portions of the IMEI and IMEISV are permanently      stored in the Mobile Equipment, so they remain persistent as long      as the Mobile Equipment exists.  The process for TAC and SNR      assignment is documented in GSMA PRD TS.06 [3], and once assigned,      the TAC and SNR values are not reassigned to other Mobile      Equipment devices.  The SVN portion of the IMEISV may be modified      by software when new versions are installed but should be      persistent for the duration of the installation of that specific      version of software.   Process of identifier assignment:      The GSMA will manage the <NSS> (including 'imei') and      <future-gsma-specifier> identifier resources to maintain      uniqueness.      The process for IMEI and IMEISV assignment is documented in GSMA      PRD TS.06 [3].Montemurro, et al.            Informational                     [Page 7]

RFC 7254                  The GSMA and IMEI URN                 May 2014   Process for identifier resolution:      Since the 'gsma' NSS is not currently globally resolvable, this is      not applicable.   Rules for Lexical Equivalence:      Two GSMA IMEI URNs are equivalent if they have the same 'imeival'      value, and the same parameter values in the same sequential order,      with the exception that the 'vers=0' parameter is to be ignored      for the purposes of comparison.  All of these comparisons are to      be case insensitive.      Any identifier in the 'gsma' NSS can be compared using the normal      mechanisms for percent-encoded UTF-8 strings (seeRFC 3629 [7]).   Conformance with URN Syntax:      The string representation of the 'gsma' NID and of the 'imei' NSS      is fully compatible with the URN syntax (seeRFC 2141 [8]).   Validation mechanism:      The IMEI can be validated using the mechanism defined in Annex B      of 3GPP TS 23.003 [2].  There is no mechanism defined to validate      the SVN field of the IMEISV.   Scope:  The GSMA URN is global in scope.4.  Specification4.1.  IMEI Parameters   The optional 'vers' parameter and the 'ext-imei' field in the ABNF   are included for extensibility of the 'imei' NSS -- for example, if   the IMEI format is extended in the future (such as with additional   digits or using hex digits).  In this case, the 'vers' parameter   would contain a non-zero value and the 'ext-imei' would be further   defined to represent the syntax of the extended IMEI format.  A value   of the 'vers' parameter equal to 0 or the absence of the 'vers'   parameter means the URN format is compliant with the format specified   here.   Any change to the format of the 'imei' NSS requires the use of the   procedure for URN NSS changes and additions (currently through the   publication of future Informational RFCs approved by IETF consensus).   The use of the 'vers' parameter was chosen for extensibility instead   of defining a new NSS (e.g., 'imei2') because it is likely that manyMontemurro, et al.            Informational                     [Page 8]

RFC 7254                  The GSMA and IMEI URN                 May 2014   applications will only need to perform string compares of the   'imeival'.  So, even if the format or length of the 'imeival' changes   in the future, such applications should continue to work without   having to be updated to understand a new NSS.RFC 7255 [10] specifies how the GSMA IMEI URN can be used as an   instance ID as specified inRFC 5626 [11].  Any future value of the   'vers' parameter other than 0, or the definition of additional   parameters that are intended to be used as part of an instance ID,   will require an update toRFC 7255 [10].   For example:      urn:gsma:imei:90420156-025763-0;vers=0   The IMEISV is an identifier that uniquely identifies mobile devices   and their associated software versions used in the GSM, UMTS, and LTE   networks.  The representation of the IMEISV is defined in 3GPP TS   23.003 [2].   To represent the IMEISV, the URN parameter 'svn' is appended to the   GSMA IMEI URN and set equal to the decimal string representation of   the two software version number (svn) digits in the IMEISV, and the   Spare digit in the IMEI 'imeival' is set to zero.   For example:      urn:gsma:imei:90420156-025763-0;svn=424.2.  IMEI Format4.2.1.  Type Allocation Code (TAC)   The TAC is an 8 decimal digit value.  The TAC identifies the type of   the Mobile Equipment and is chosen from a range of values allocated   to the Mobile Equipment manufacturer in order to uniquely identify   the model of the Mobile Equipment.4.2.2.  Serial Number (SNR)   The SNR is a 6 decimal digit value.  The SNR is an individual serial   number that uniquely identifies each Mobile Equipment device within   the TAC.Montemurro, et al.            Informational                     [Page 9]

RFC 7254                  The GSMA and IMEI URN                 May 20144.2.3.  Spare   The Spare is a single decimal digit.  When the IMEI is stored on the   Mobile Equipment and network equipment, it contains a value that is   used as a Check digit and is intended to avoid manual reporting   errors (e.g., when customers register stolen mobiles at the   operator's customer care desk) and also to help guard against the   possibility of incorrect entries being provisioned in the network   equipment.  The Spare is always set to zero when transmitted by the   Mobile Equipment (including when in the IMEI URN format).  Annex B of   3GPP TS 23.003 [2] specifies a mechanism for computing the actual   Check digit in order to validate the TAC and SNR.4.2.4.  Binary Encoding   When included in a cellular signaling message, the IMEI format is 15   decimal digits encoded in 8 octets, using BCD as defined in 3GPP TS   24.008 [6].  Figure 1 is an abstract representation of a BCD-encoded   IMEI stored in memory (the actual storage format in memory is   implementation specific).  In Figure 1, the most significant digit of   the TAC is coded in the least significant bits of octet 1.  The most   significant digit of the SNR is coded in the least significant bits   of octet 5.  The Spare digit is coded in the least significant bits   of octet 8.  When included in an identity element in a cellular   signaling message, the most significant digit of the TAC is   included in digit 1 of the identity element in Figure 10.5.4 of   3GPP TS 24.008 [6].       14 13 12 11 10  9  8  7  6  5  4  3  2  1  0  Decimal Digits      +--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+      |                       |                 | S|      |            T          |          S      | p|      |            A          |          N      | a|      |            C          |          R      | r|      |                       |                 | e|      +--+-----+-----+-----+--+--+-----+-----+--+--+         1     2     3     4     5     6     7     8  Octets                           Figure 1: IMEI Format4.3.  IMEISV Format4.3.1.  Type Allocation Code (TAC)   The TAC is the same as the TAC in the IMEI (seeSection 4.2.1).Montemurro, et al.            Informational                    [Page 10]

RFC 7254                  The GSMA and IMEI URN                 May 20144.3.2.  Serial Number (SNR)   The SNR is the same as the SNR in the IMEI (seeSection 4.2.2).4.3.3.  Software Version Number (SVN)   The Software Version Number is allocated by the mobile device   manufacturer to identify the software version of the mobile device.4.3.4.  Binary Encoding   When included in a cellular signaling message, the IMEISV format is   16 decimal digits encoded in 8 octets using BCD as defined in 3GPP TS   24.008 [6].  Figure 2 is an abstract representation of a BCD-encoded   IMEISV stored in memory (the actual storage format in memory is   implementation specific).  In Figure 2, the most significant digit of   the TAC is coded in the most significant bits of octet 1.  The most   significant digit of the SNR is coded in the most significant bits of   octet 5.  The most significant digit of the SVN is coded in the most   significant bits of octet 8.  When included in an identity element in   a cellular signaling message, the most significant digit of the TAC   is included in digit 1 of the identity element in Figure 10.5.4 of   3GPP TS 24.008 [6].       15 14 13 12 11 10  9  8  7  6  5  4  3  2  1  0  Decimal Digits      +--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+      |                       |                 |     |      |            T          |          S      |  S  |      |            A          |          N      |  V  |      |            C          |          R      |  N  |      |                       |                 |     |      +-----+-----+-----+-----+-----+-----+-----+-----+            1     2     3     4     5     6     7     8  Octets                          Figure 2: IMEISV Format5.  Community Considerations   GSM, UMTS, and LTE mobile devices will be interoperating with   Internet devices for a variety of voice and data services.  To do   this, they need to make use of Internet protocols that will operate   end to end between devices in GSM/UMTS/LTE networks and those in the   general Internet.  Some of these protocols require the use of URNs as   identifiers.  Within the GSM/UMTS/LTE networks, mobile devices are   identified by their IMEI or IMEISV.  Internet users will need to be   able to receive and include the GSMA URN in various Internet protocol   elements to facilitate communication between pure Internet-based   devices and GSM/UMTS/LTE mobile devices.  Thus, the existence andMontemurro, et al.            Informational                    [Page 11]

RFC 7254                  The GSMA and IMEI URN                 May 2014   syntax of these namespaces need to be available to the general   Internet community, and the namespace needs to be reserved with IANA   in order to guarantee uniqueness and prevent potential namespace   conflicts both within the Internet and within GSM/UMTS/LTE networks.   Conversely, Internet implementations will not generally possess IMEI   identifiers.  The identifiers generated by such implementations will   typically be URNs within namespaces other than 'gsma' and may,   depending on context, even be non-URN URIs.  Implementations are   advised to be ready to process URIs other than 'gsma' namespaced   URNs, so as to aid in interoperability.6.  Namespace Considerations   A URN was considered the most appropriate URI to represent the IMEI   and IMEISV, as these identifiers may be used and transported   similarly to the Universally Unique Identifier (UUID), which is   defined as a URN inRFC 4122 [12].  Since specifications for   protocols that are used to transport device identifiers often require   the device identifier to be globally unique and in the URN format, it   is necessary that the URN formats are defined to represent the IMEI   and IMEISV.7.  IANA Considerations   In accordance withBCP 66 (RFC 3406) [1], IANA has registered the   Formal URN Namespace 'gsma' in the "Uniform Resource Names (URN)   Namespaces" registry, using the registration template presented inSection 3 of this document.8.  Security and Privacy Considerations   IMEIs (but with the Spare value set to the value of the Check digit)   are displayable on most mobile devices and in many cases are printed   on the case within the battery compartment.  Anyone with brief   physical access to the mobile device can therefore easily obtain the   IMEI.  Therefore, IMEIs MUST NOT be used as security capabilities   (identifiers whose mere possession grants access).  Unfortunately,   there are currently examples of some applications that are using the   IMEI for authorization.  Also, some service provider's customer   service departments have been known to use knowledge of the IMEI as   "proof" that the caller is the legitimate owner of the mobile device.   Both of these are inappropriate uses of the IMEI.   While the specific software version of the mobile device only   identifies the lower-layer software that has undergone and passed   certification testing, and not the operating system or application   software, the software version could identify software that is   vulnerable to attacks or is known to contain security holes.Montemurro, et al.            Informational                    [Page 12]

RFC 7254                  The GSMA and IMEI URN                 May 2014   Therefore, the IMEISV MUST only be delivered to trusted entities   within carrier networks and not provided to the Internet at large, as   it could help a malicious device identify that the mobile device is   running software that is known to be vulnerable to certain attacks.   This concern is similar to concerns regarding the use of the   User-Agent header in the Session Initiation Protocol (SIP) as   specified inRFC 3261 [13].  Therefore, the IMEISV (that is, the IMEI   URN with a 'svn' parameter) MUST NOT be delivered to devices that are   not trusted.  IMEIs are almost always personally identifiable   information, and so these URNs MUST be treated as personally   identifiable information in all cases.  In order to prevent violating   a user's privacy, the IMEI URN MUST NOT be included in messages   intended to convey any level of anonymity.   Since the IMEI is permanently assigned to the mobile device and is   not modified when the ownership of the mobile device changes (even   upon a complete software reload of the device), the IMEI URN MUST NOT   be used as a user identifier or user address by an application.   Using the IMEI to identify a user or as a user address could result   in communications destined for a previous owner of a device being   received by the new device owner or could allow the new device owner   to access information or services owned by the previous device owner.   Additionally, since the IMEI identifies the mobile device, it   potentially could be used to identify and track users for the   purposes of surveillance and call data mining if sent in the clear.   Since the IMEI is personally identifiable information, uses of the   IMEI URN with IETF protocols require a specification and IETF Expert   Review [14] in order to ensure that privacy concerns are   appropriately addressed.  Protocols carrying the IMEI URN SHOULD at a   minimum use channels that are strongly hop-by-hop encrypted, and it   is RECOMMENDED that end-to-end encryption be used.   Additional security considerations are specified in 3GPP TS 22.016   [9].  Specifically, the IMEI is to be incorporated in a module that   is contained within the terminal.  The IMEI SHALL NOT be changed   after the terminal's production process.  It SHALL resist tampering,   i.e., manipulation and change, by any means (e.g., physical,   electrical, and software).Montemurro, et al.            Informational                    [Page 13]

RFC 7254                  The GSMA and IMEI URN                 May 20149.  Acknowledgements   This document draws heavily on the 3GPP work on Numbering,   Addressing, and Identification in 3GPP TS 23.003 [2] and also on the   style and structure used inRFC 4122 [12].  The authors would like to   thank Cullen Jennings, Lisa Dusseault, Dale Worley, Ivo Sedlacek,   Atle Monrad, James Yu, Mary Barnes, Tim Bray, S. Moonesamy, Alexey   Melnikov, Martin Duerst, John Klensin, Paul Kyzivat, Christer   Holmberg, Barry Leiba, and Stephen Farrell for their help and   comments.10.  References10.1.  Normative References   [1]  Daigle, L., van Gulik, D., Iannella, R., and P. Faltstrom,        "Uniform Resource Names (URN) Namespace Definition Mechanisms",BCP 66,RFC 3406, October 2002.   [2]  3GPP, "Numbering, addressing and identification", 3GPP TS 23.003        (Release 8), March 2014, <ftp://ftp.3gpp.org/Specs/archive/23_series/23.003/>.   [3]  GSM Association, "IMEI Allocation and Approval Guidelines", PRD        TS.06 (DG06) Version 6.0, July 2011,        <http://www.gsma.com/newsroom/wp-content/uploads/2012/06/ts0660tacallocationprocessapproved.pdf>.   [4]  Bradner, S., "Key words for use in RFCs to Indicate Requirement        Levels",BCP 14,RFC 2119, March 1997.   [5]  Crocker, D. and P. Overell, "Augmented BNF for Syntax        Specifications: ABNF", STD 68,RFC 5234, January 2008.   [6]  3GPP, "Mobile radio interface Layer 3 specification; Core        network protocols; Stage 3", 3GPP TS 24.008 (Release 8), June        2013, <ftp://ftp.3gpp.org/Specs/archive/24_series/ 24.008/>.   [7]  Yergeau, F., "UTF-8, a transformation format of ISO 10646", STD        63,RFC 3629, November 2003.   [8]  Moats, R., "URN Syntax",RFC 2141, May 1997.   [9]  3GPP, "International Mobile station Equipment Identities        (IMEI)", 3GPP TS 22.016 (Release 8), December 2009,        <ftp://ftp.3gpp.org/Specs/archive/22_series/22.016/>.Montemurro, et al.            Informational                    [Page 14]

RFC 7254                  The GSMA and IMEI URN                 May 201410.2.  Informative References   [10] Allen, A., Ed., "Using the International Mobile station        Equipment Identity (IMEI) Uniform Resource Name (URN) as an        Instance ID",RFC 7255, May 2014.   [11] Jennings, C., Mahy, R., and F. Audet, "Managing Client-        Initiated Connections in the Session Initiation Protocol (SIP)",RFC 5626, October 2009.   [12] Leach, P., Mealling, M., and R. Salz, "A Universally Unique        IDentifier (UUID) URN Namespace",RFC 4122, July 2005.   [13] Rosenberg, J., Schulzrinne, H., Camarillo, G., Johnston, A.,        Peterson, J., Sparks, R., Handley, M., and E.  Schooler, "SIP:        Session Initiation Protocol",RFC 3261, June 2002.   [14] Narten, T. and H. Alvestrand, "Guidelines for Writing an IANA        Considerations Section in RFCs",BCP 26,RFC 5226, May 2008.Montemurro, et al.            Informational                    [Page 15]

RFC 7254                  The GSMA and IMEI URN                 May 2014Authors' Addresses   Michael Montemurro (editor)   Blackberry   4701 Tahoe Dr.   Mississauga, Ontario  L4W 0B4   Canada   EMail: mmontemurro@blackberry.com   Andrew Allen   Blackberry   1200 Sawgrass Corporate Parkway   Sunrise, Florida  33323   USA   EMail: aallen@blackberry.com   David McDonald   Eircom   EMail: David.McDonald@meteor.ie   Paul Gosden   GSM Association   1st Floor, Mid City Place, 71 High Holborn   London   England   EMail: pgosden@gsma.comMontemurro, et al.            Informational                    [Page 16]

[8]ページ先頭

©2009-2025 Movatter.jp