Movatterモバイル変換
[0]ホーム
[RFC Home] [TEXT|PDF|HTML] [Tracker] [IPR] [Errata] [Info page]
PROPOSED STANDARD
Errata ExistInternet Engineering Task Force (IETF) P. Bryan, Ed.Request for Comments: 6902 Salesforce.comCategory: Standards Track M. Nottingham, Ed.ISSN: 2070-1721 Akamai April 2013JavaScript Object Notation (JSON) PatchAbstract JSON Patch defines a JSON document structure for expressing a sequence of operations to apply to a JavaScript Object Notation (JSON) document; it is suitable for use with the HTTP PATCH method. The "application/json-patch+json" media type is used to identify such patch documents.Status of This Memo This is an Internet Standards Track document. This document is a product of the Internet Engineering Task Force (IETF). It represents the consensus of the IETF community. It has received public review and has been approved for publication by the Internet Engineering Steering Group (IESG). Further information on Internet Standards is available inSection 2 of RFC 5741. Information about the current status of this document, any errata, and how to provide feedback on it may be obtained athttp://www.rfc-editor.org/info/rfc6902.Copyright Notice Copyright (c) 2013 IETF Trust and the persons identified as the document authors. All rights reserved. This document is subject toBCP 78 and the IETF Trust's Legal Provisions Relating to IETF Documents (http://trustee.ietf.org/license-info) in effect on the date of publication of this document. Please review these documents carefully, as they describe your rights and restrictions with respect to this document. Code Components extracted from this document must include Simplified BSD License text as described in Section 4.e of the Trust Legal Provisions and are provided without warranty as described in the Simplified BSD License.Bryan & Nottingham Standards Track [Page 1]
RFC 6902 JSON Patch April 2013Table of Contents1. Introduction . . . . . . . . . . . . . . . . . . . . . . . . .32. Conventions . . . . . . . . . . . . . . . . . . . . . . . . .33. Document Structure . . . . . . . . . . . . . . . . . . . . . .34. Operations . . . . . . . . . . . . . . . . . . . . . . . . . .44.1. add . . . . . . . . . . . . . . . . . . . . . . . . . . .44.2. remove . . . . . . . . . . . . . . . . . . . . . . . . . .64.3. replace . . . . . . . . . . . . . . . . . . . . . . . . .64.4. move . . . . . . . . . . . . . . . . . . . . . . . . . . .64.5. copy . . . . . . . . . . . . . . . . . . . . . . . . . . .74.6. test . . . . . . . . . . . . . . . . . . . . . . . . . . .75. Error Handling . . . . . . . . . . . . . . . . . . . . . . . .86. IANA Considerations . . . . . . . . . . . . . . . . . . . . .97. Security Considerations . . . . . . . . . . . . . . . . . . .108. Acknowledgements . . . . . . . . . . . . . . . . . . . . . . .109. References . . . . . . . . . . . . . . . . . . . . . . . . . .109.1. Normative References . . . . . . . . . . . . . . . . . . .109.2. Informative References . . . . . . . . . . . . . . . . . .10Appendix A. Examples . . . . . . . . . . . . . . . . . . . . . .12A.1. Adding an Object Member . . . . . . . . . . . . . . . . .12A.2. Adding an Array Element . . . . . . . . . . . . . . . . .12A.3. Removing an Object Member . . . . . . . . . . . . . . . .12A.4. Removing an Array Element . . . . . . . . . . . . . . . .13A.5. Replacing a Value . . . . . . . . . . . . . . . . . . . .13A.6. Moving a Value . . . . . . . . . . . . . . . . . . . . . .14A.7. Moving an Array Element . . . . . . . . . . . . . . . . .14A.8. Testing a Value: Success . . . . . . . . . . . . . . . . .15A.9. Testing a Value: Error . . . . . . . . . . . . . . . . . .15A.10. Adding a Nested Member Object . . . . . . . . . . . . . .15A.11. Ignoring Unrecognized Elements . . . . . . . . . . . . . .16A.12. Adding to a Nonexistent Target . . . . . . . . . . . . . .16A.13. Invalid JSON Patch Document . . . . . . . . . . . . . . .17A.14. ~ Escape Ordering . . . . . . . . . . . . . . . . . . . .17A.15. Comparing Strings and Numbers . . . . . . . . . . . . . .17A.16. Adding an Array Value . . . . . . . . . . . . . . . . . .18Bryan & Nottingham Standards Track [Page 2]
RFC 6902 JSON Patch April 20131. Introduction JavaScript Object Notation (JSON) [RFC4627] is a common format for the exchange and storage of structured data. HTTP PATCH [RFC5789] extends the Hypertext Transfer Protocol (HTTP) [RFC2616] with a method to perform partial modifications to resources. JSON Patch is a format (identified by the media type "application/ json-patch+json") for expressing a sequence of operations to apply to a target JSON document; it is suitable for use with the HTTP PATCH method. This format is also potentially useful in other cases in which it is necessary to make partial updates to a JSON document or to a data structure that has similar constraints (i.e., they can be serialized as an object or an array using the JSON grammar).2. Conventions The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT", "SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL" in this document are to be interpreted as described inRFC 2119 [RFC2119].3. Document Structure A JSON Patch document is a JSON [RFC4627] document that represents an array of objects. Each object represents a single operation to be applied to the target JSON document. The following is an example JSON Patch document, transferred in an HTTP PATCH request: PATCH /my/data HTTP/1.1 Host: example.org Content-Length: 326 Content-Type: application/json-patch+json If-Match: "abc123" [ { "op": "test", "path": "/a/b/c", "value": "foo" }, { "op": "remove", "path": "/a/b/c" }, { "op": "add", "path": "/a/b/c", "value": [ "foo", "bar" ] }, { "op": "replace", "path": "/a/b/c", "value": 42 }, { "op": "move", "from": "/a/b/c", "path": "/a/b/d" }, { "op": "copy", "from": "/a/b/d", "path": "/a/b/e" } ]Bryan & Nottingham Standards Track [Page 3]
RFC 6902 JSON Patch April 2013 Evaluation of a JSON Patch document begins against a target JSON document. Operations are applied sequentially in the order they appear in the array. Each operation in the sequence is applied to the target document; the resulting document becomes the target of the next operation. Evaluation continues until all operations are successfully applied or until an error condition is encountered.4. Operations Operation objects MUST have exactly one "op" member, whose value indicates the operation to perform. Its value MUST be one of "add", "remove", "replace", "move", "copy", or "test"; other values are errors. The semantics of each object is defined below. Additionally, operation objects MUST have exactly one "path" member. That member's value is a string containing a JSON-Pointer value [RFC6901] that references a location within the target document (the "target location") where the operation is performed. The meanings of other operation object members are defined by operation (see the subsections below). Members that are not explicitly defined for the operation in question MUST be ignored (i.e., the operation will complete as if the undefined member did not appear in the object). Note that the ordering of members in JSON objects is not significant; therefore, the following operation objects are equivalent: { "op": "add", "path": "/a/b/c", "value": "foo" } { "path": "/a/b/c", "op": "add", "value": "foo" } { "value": "foo", "path": "/a/b/c", "op": "add" } Operations are applied to the data structures represented by a JSON document, i.e., after any unescaping (see[RFC4627], Section 2.5) takes place.4.1. add The "add" operation performs one of the following functions, depending upon what the target location references: o If the target location specifies an array index, a new value is inserted into the array at the specified index. o If the target location specifies an object member that does not already exist, a new member is added to the object.Bryan & Nottingham Standards Track [Page 4]
RFC 6902 JSON Patch April 2013 o If the target location specifies an object member that does exist, that member's value is replaced. The operation object MUST contain a "value" member whose content specifies the value to be added. For example: { "op": "add", "path": "/a/b/c", "value": [ "foo", "bar" ] } When the operation is applied, the target location MUST reference one of: o The root of the target document - whereupon the specified value becomes the entire content of the target document. o A member to add to an existing object - whereupon the supplied value is added to that object at the indicated location. If the member already exists, it is replaced by the specified value. o An element to add to an existing array - whereupon the supplied value is added to the array at the indicated location. Any elements at or above the specified index are shifted one position to the right. The specified index MUST NOT be greater than the number of elements in the array. If the "-" character is used to index the end of the array (see [RFC6901]), this has the effect of appending the value to the array. Because this operation is designed to add to existing objects and arrays, its target location will often not exist. Although the pointer's error handling algorithm will thus be invoked, this specification defines the error handling behavior for "add" pointers to ignore that error and add the value as specified. However, the object itself or an array containing it does need to exist, and it remains an error for that not to be the case. For example, an "add" with a target location of "/a/b" starting with this document: { "a": { "foo": 1 } } is not an error, because "a" exists, and "b" will be added to its value. It is an error in this document: { "q": { "bar": 2 } } because "a" does not exist.Bryan & Nottingham Standards Track [Page 5]
RFC 6902 JSON Patch April 20134.2. remove The "remove" operation removes the value at the target location. The target location MUST exist for the operation to be successful. For example: { "op": "remove", "path": "/a/b/c" } If removing an element from an array, any elements above the specified index are shifted one position to the left.4.3. replace The "replace" operation replaces the value at the target location with a new value. The operation object MUST contain a "value" member whose content specifies the replacement value. The target location MUST exist for the operation to be successful. For example: { "op": "replace", "path": "/a/b/c", "value": 42 } This operation is functionally identical to a "remove" operation for a value, followed immediately by an "add" operation at the same location with the replacement value.4.4. move The "move" operation removes the value at a specified location and adds it to the target location. The operation object MUST contain a "from" member, which is a string containing a JSON Pointer value that references the location in the target document to move the value from. The "from" location MUST exist for the operation to be successful. For example: { "op": "move", "from": "/a/b/c", "path": "/a/b/d" } This operation is functionally identical to a "remove" operation on the "from" location, followed immediately by an "add" operation at the target location with the value that was just removed.Bryan & Nottingham Standards Track [Page 6]
RFC 6902 JSON Patch April 2013 The "from" location MUST NOT be a proper prefix of the "path" location; i.e., a location cannot be moved into one of its children.4.5. copy The "copy" operation copies the value at a specified location to the target location. The operation object MUST contain a "from" member, which is a string containing a JSON Pointer value that references the location in the target document to copy the value from. The "from" location MUST exist for the operation to be successful. For example: { "op": "copy", "from": "/a/b/c", "path": "/a/b/e" } This operation is functionally identical to an "add" operation at the target location using the value specified in the "from" member.4.6. test The "test" operation tests that a value at the target location is equal to a specified value. The operation object MUST contain a "value" member that conveys the value to be compared to the target location's value. The target location MUST be equal to the "value" value for the operation to be considered successful. Here, "equal" means that the value at the target location and the value conveyed by "value" are of the same JSON type, and that they are considered equal by the following rules for that type: o strings: are considered equal if they contain the same number of Unicode characters and their code points are byte-by-byte equal. o numbers: are considered equal if their values are numerically equal. o arrays: are considered equal if they contain the same number of values, and if each value can be considered equal to the value at the corresponding position in the other array, using this list of type-specific rules.Bryan & Nottingham Standards Track [Page 7]
RFC 6902 JSON Patch April 2013 o objects: are considered equal if they contain the same number of members, and if each member can be considered equal to a member in the other object, by comparing their keys (as strings) and their values (using this list of type-specific rules). o literals (false, true, and null): are considered equal if they are the same. Note that the comparison that is done is a logical comparison; e.g., whitespace between the member values of an array is not significant. Also, note that ordering of the serialization of object members is not significant. For example: { "op": "test", "path": "/a/b/c", "value": "foo" }5. Error Handling If a normative requirement is violated by a JSON Patch document, or if an operation is not successful, evaluation of the JSON Patch document SHOULD terminate and application of the entire patch document SHALL NOT be deemed successful. See[RFC5789], Section 2.2 for considerations regarding handling errors when JSON Patch is used with the HTTP PATCH method, including suggested status codes to use to indicate various conditions. Note that the HTTP PATCH method is atomic, as per [RFC5789]. Therefore, the following patch would result in no changes being made to the document at all (because the "test" operation results in an error): [ { "op": "replace", "path": "/a/b/c", "value": 42 }, { "op": "test", "path": "/a/b/c", "value": "C" } ]Bryan & Nottingham Standards Track [Page 8]
RFC 6902 JSON Patch April 20136. IANA Considerations The Internet media type for a JSON Patch document is application/ json-patch+json. Type name: application Subtype name: json-patch+json Required parameters: none Optional parameters: none Encoding considerations: binary Security considerations: See Security Considerations inSection 7. Interoperability considerations: N/A Published specification:RFC 6902 Applications that use this media type: Applications that manipulate JSON documents. Additional information: Magic number(s): N/A File extension(s): .json-patch Macintosh file type code(s): TEXT Person & email address to contact for further information: Paul C. Bryan <pbryan@anode.ca> Intended usage: COMMON Restrictions on usage: none Author: Paul C. Bryan <pbryan@anode.ca> Change controller: IETFBryan & Nottingham Standards Track [Page 9]
RFC 6902 JSON Patch April 20137. Security Considerations This specification has the same security considerations as JSON [RFC4627] and JSON-Pointer [RFC6901]. A few older Web browsers can be coerced into loading an arbitrary JSON document whose root is an array, leading to a situation in which a JSON Patch document containing sensitive information could be exposed to attackers, even if access is authenticated. This is known as a Cross-Site Request Forgery (CSRF) attack [CSRF]. However, such browsers are not widely used (at the time of writing, it is estimated that they are used in less than 1% of the market). Publishers who are nevertheless concerned about this attack are advised to avoid making such documents available with HTTP GET.8. Acknowledgements The following individuals contributed ideas, feedback and wording to this specification: Mike Acar, Mike Amundsen, Cyrus Daboo, Paul Davis, Stefan Koegl, Murray S. Kucherawy, Dean Landolt, Randall Leeds, James Manger, Julian Reschke, James Snell, Eli Stevens, and Henry S. Thompson. The structure of a JSON Patch document was influenced by the XML Patch document specification [RFC5261].9. References9.1. Normative References [RFC2119] Bradner, S., "Key words for use in RFCs to Indicate Requirement Levels",BCP 14,RFC 2119, March 1997. [RFC4627] Crockford, D., "The application/json Media Type for JavaScript Object Notation (JSON)",RFC 4627, July 2006. [RFC6901] Bryan, P., Ed., Zyp, K., and M. Nottingham, Ed., "JavaScript Object Notation (JSON) Pointer",RFC 6901, April 2013.9.2. Informative References [CSRF] Barth, A., Jackson, C., and J. Mitchell, "Robust Defenses for Cross-Site Request Forgery", ACM Conference on Computer and Communications Security, October 2008, <http://seclab.stanford.edu/websec/csrf/csrf.pdf>.Bryan & Nottingham Standards Track [Page 10]
RFC 6902 JSON Patch April 2013 [RFC2616] Fielding, R., Gettys, J., Mogul, J., Frystyk, H., Masinter, L., Leach, P., and T. Berners-Lee, "Hypertext Transfer Protocol -- HTTP/1.1",RFC 2616, June 1999. [RFC5261] Urpalainen, J., "An Extensible Markup Language (XML) Patch Operations Framework Utilizing XML Path Language (XPath) Selectors",RFC 5261, September 2008. [RFC5789] Dusseault, L. and J. Snell, "PATCH Method for HTTP",RFC 5789, March 2010.Bryan & Nottingham Standards Track [Page 11]
RFC 6902 JSON Patch April 2013Appendix A. ExamplesA.1. Adding an Object Member An example target JSON document: { "foo": "bar"} A JSON Patch document: [ { "op": "add", "path": "/baz", "value": "qux" } ] The resulting JSON document: { "baz": "qux", "foo": "bar" }A.2. Adding an Array Element An example target JSON document: { "foo": [ "bar", "baz" ] } A JSON Patch document: [ { "op": "add", "path": "/foo/1", "value": "qux" } ] The resulting JSON document: { "foo": [ "bar", "qux", "baz" ] }A.3. Removing an Object Member An example target JSON document: { "baz": "qux", "foo": "bar" }Bryan & Nottingham Standards Track [Page 12]
RFC 6902 JSON Patch April 2013 A JSON Patch document: [ { "op": "remove", "path": "/baz" } ] The resulting JSON document: { "foo": "bar" }A.4. Removing an Array Element An example target JSON document: { "foo": [ "bar", "qux", "baz" ] } A JSON Patch document: [ { "op": "remove", "path": "/foo/1" } ] The resulting JSON document: { "foo": [ "bar", "baz" ] }A.5. Replacing a Value An example target JSON document: { "baz": "qux", "foo": "bar" } A JSON Patch document: [ { "op": "replace", "path": "/baz", "value": "boo" } ] The resulting JSON document: { "baz": "boo", "foo": "bar" }Bryan & Nottingham Standards Track [Page 13]
RFC 6902 JSON Patch April 2013A.6. Moving a Value An example target JSON document: { "foo": { "bar": "baz", "waldo": "fred" }, "qux": { "corge": "grault" } } A JSON Patch document: [ { "op": "move", "from": "/foo/waldo", "path": "/qux/thud" } ] The resulting JSON document: { "foo": { "bar": "baz" }, "qux": { "corge": "grault", "thud": "fred" } }A.7. Moving an Array Element An example target JSON document: { "foo": [ "all", "grass", "cows", "eat" ] } A JSON Patch document: [ { "op": "move", "from": "/foo/1", "path": "/foo/3" } ] The resulting JSON document: { "foo": [ "all", "cows", "eat", "grass" ] }Bryan & Nottingham Standards Track [Page 14]
RFC 6902 JSON Patch April 2013A.8. Testing a Value: Success An example target JSON document: { "baz": "qux", "foo": [ "a", 2, "c" ] } A JSON Patch document that will result in successful evaluation: [ { "op": "test", "path": "/baz", "value": "qux" }, { "op": "test", "path": "/foo/1", "value": 2 } ]A.9. Testing a Value: Error An example target JSON document: { "baz": "qux" } A JSON Patch document that will result in an error condition: [ { "op": "test", "path": "/baz", "value": "bar" } ]A.10. Adding a Nested Member Object An example target JSON document: { "foo": "bar" } A JSON Patch document: [ { "op": "add", "path": "/child", "value": { "grandchild": { } } } ]Bryan & Nottingham Standards Track [Page 15]
RFC 6902 JSON Patch April 2013 The resulting JSON document: { "foo": "bar", "child": { "grandchild": { } } }A.11. Ignoring Unrecognized Elements An example target JSON document: { "foo": "bar" } A JSON Patch document: [ { "op": "add", "path": "/baz", "value": "qux", "xyz": 123 } ] The resulting JSON document: { "foo": "bar", "baz": "qux" }A.12. Adding to a Nonexistent Target An example target JSON document: { "foo": "bar" } A JSON Patch document: [ { "op": "add", "path": "/baz/bat", "value": "qux" } ] This JSON Patch document, applied to the target JSON document above, would result in an error (therefore, it would not be applied), because the "add" operation's target location that references neither the root of the document, nor a member of an existing object, nor a member of an existing array.Bryan & Nottingham Standards Track [Page 16]
RFC 6902 JSON Patch April 2013A.13. Invalid JSON Patch Document A JSON Patch document: [ { "op": "add", "path": "/baz", "value": "qux", "op": "remove" } ] This JSON Patch document cannot be treated as an "add" operation, because it contains a later "op":"remove" element. JSON requires that object member names be unique with a "SHOULD" requirement, and there is no standard error handling for duplicates.A.14. ~ Escape Ordering An example target JSON document: { "/": 9, "~1": 10 } A JSON Patch document: [ {"op": "test", "path": "/~01", "value": 10} ] The resulting JSON document: { "/": 9, "~1": 10 }A.15. Comparing Strings and Numbers An example target JSON document: { "/": 9, "~1": 10 }Bryan & Nottingham Standards Track [Page 17]
RFC 6902 JSON Patch April 2013 A JSON Patch document: [ {"op": "test", "path": "/~01", "value": "10"} ] This results in an error, because the test fails. The document value is numeric, whereas the value being tested for is a string.A.16. Adding an Array Value An example target JSON document: { "foo": ["bar"] } A JSON Patch document: [ { "op": "add", "path": "/foo/-", "value": ["abc", "def"] } ] The resulting JSON document: { "foo": ["bar", ["abc", "def"]] }Authors' Addresses Paul C. Bryan (editor) Salesforce.com Phone: +1 604 783 1481 EMail: pbryan@anode.ca Mark Nottingham (editor) Akamai EMail: mnot@mnot.netBryan & Nottingham Standards Track [Page 18]
[8]ページ先頭