Movatterモバイル変換

[RFC Home] [TEXT|PDF|HTML] [Tracker] [IPR] [Errata] [Info page]

PROPOSED STANDARD
Errata Exist

Network Working Group A. GulbrandsenRequest for Comments: 5465 Oryx Mail Systems GmbHUpdates:5267 C. KingCategory: Standards Track A. Melnikov Isode Ltd. February 2009The IMAP NOTIFY ExtensionStatus of This Memo This document specifies an Internet standards track protocol for the Internet community, and requests discussion and suggestions for improvements. Please refer to the current edition of the "Internet Official Protocol Standards" (STD 1) for the standardization state and status of this protocol. Distribution of this memo is unlimited.Copyright Notice Copyright (c) 2009 IETF Trust and the persons identified as the document authors. All rights reserved. This document is subject toBCP 78 and the IETF Trust's Legal Provisions Relating to IETF Documents (http://trustee.ietf.org/license-info) in effect on the date of publication of this document. Please review these documents carefully, as they describe your rights and restrictions with respect to this document.Abstract This document defines an IMAP extension that allows a client to request specific kinds of unsolicited notifications for specified mailboxes, such as messages being added to or deleted from such mailboxes.Gulbrandsen, et al. Standards Track [Page 1]

RFC 5465 IMAP NOTIFY Extension February 2009Table of Contents1. Overview and Rationale ..........................................32. Conventions Used in This Document ...............................43. The NOTIFY Extension ............................................43.1. The NOTIFY Command .........................................44. Interaction with the IDLE Command ...............................85. Event Types .....................................................85.1. FlagChange and AnnotationChange ............................95.2. MessageNew .................................................95.3. MessageExpunge ............................................105.4. MailboxName ...............................................115.5. SubscriptionChange ........................................125.6. MailboxMetadataChange .....................................125.7. ServerMetadataChange ......................................135.8. Notification Overflow .....................................135.9. ACL (Access Control List) Changes .........................136. Mailbox Specification ..........................................14 6.1. Mailbox Specifiers Affecting the Currently Selected Mailbox ..........................................146.2. Personal ..................................................156.3. Inboxes ...................................................156.4. Subscribed ................................................156.5. Subtree ...................................................156.6. Mailboxes .................................................167. Extension to SEARCH and SORT Commands ..........................168. Formal Syntax ..................................................169. Security Considerations ........................................1910. IANA Considerations ...........................................1910.1. Initial LIST-EXTENDED Extended Data Item Registrations ...1911. Acknowledgements ..............................................2012. Normative References ..........................................2013. Informative References ........................................21Gulbrandsen, et al. Standards Track [Page 2]

RFC 5465 IMAP NOTIFY Extension February 20091. Overview and Rationale The IDLE command (defined in [RFC2177]) provides a way for the client to go into a mode where the IMAP server pushes it notifications about IMAP mailstore events for the selected mailbox. However, the IDLE extension doesn't restrict or control which server events can be sent, or what information the server sends in response to each event. Also, IDLE only applies to the selected mailbox, thus requiring an additional TCP connection per mailbox. This document defines an IMAP extension that allows clients to express their preferences about unsolicited events generated by the server. The extension allows clients to only receive events that they are interested in, while servers know that they don't need to go to the effort of generating certain types of untagged responses. Without the NOTIFY command defined in this document, an IMAP server will only send information about mailstore changes to the client in the following cases: - as the result of a client command (e.g., FETCH responses to a FETCH or STORE command), - as unsolicited responses sent just before the end of a command (e.g., EXISTS or EXPUNGE) as the result of changes in other sessions, and - during an IDLE command. The NOTIFY command extends what information may be returned in those last two cases, and also permits and requires the server to send information about updates between commands. The NOTIFY command also allows for the client to extend what information is sent unsolicited about the selected mailbox and to request some update information to be sent regarding other mailboxes. The interaction between IDLE and NOTIFY commands is described inSection 4. For the new messages delivered to or appended to the selected mailbox, the NOTIFY command can be used to request that a set of attributes be sent to the client in an unsolicited FETCH response. This allows a client to be a passive recipient of events and new mail and to be able to maintain full synchronisation without having to issue any subsequent commands except to modify the state of the mailbox on the server.Gulbrandsen, et al. Standards Track [Page 3]

RFC 5465                 IMAP NOTIFY Extension             February 2009   Some mobile clients, however, may want mail "pushed" only for mail   that matches a SEARCH pattern.  To meet that need, [RFC5267] is   augmented by this document to extend the UPDATE return option to   specify a list of fetch-atts to be returned when a new message is   delivered or appended in another session.2.  Conventions Used in This Document   The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT",   "SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL" in this   document are to be interpreted as described in [RFC2119].   The acronym MSN stands for Message Sequence Numbers (seeSection2.3.1.2 of [RFC3501]).   Example lines prefaced by "C:" are sent by the client and ones   prefaced by "S:", by the server.  "[...]" means elision.3.  The NOTIFY Extension   IMAP servers that support this extension advertise the NOTIFY   capability.  This extension adds the NOTIFY command as defined inSection 5.1.   A server implementing this extension is not required to implement   LIST-EXTENDED [RFC5258], even though a NOTIFY-compliant server must   be able to return extended LIST responses, defined in [RFC5258].3.1.  The NOTIFY Command   Arguments:  "SET"               Optional STATUS indicator               Mailboxes to be watched               Events about which to notify the client   Or   Arguments:  "NONE"   Responses:  Possibly untagged STATUS responses (for SET)   Result:     OK - The server will notify the client as requested.               NO -  Unsupported NOTIFY event, NOTIFY too complex or                     expensive, etc.               BAD - Command unknown, invalid, unsupported, or has                     unknown arguments.Gulbrandsen, et al.         Standards Track                     [Page 4]

RFC 5465 IMAP NOTIFY Extension February 2009 The NOTIFY command informs the server that the client listens for event notifications all the time (even when no command is in progress), and requests the server to notify it about the specified set of events. The NOTIFY command has two forms. NOTIFY NONE specifies that the client is not interested in any kind of event happening on the server. NOTIFY SET replaces the current list of interesting events with a new list of events. Until the NOTIFY command is used for the first time, the server only sends notifications while a command is being processed, and notifies the client about these events on the selected mailbox (seeSection 5 for definitions): MessageNew, MessageExpunge, or FlagChange. It does not notify the client about any events on other mailboxes. The effect of a successful NOTIFY command lasts until the next NOTIFY command or until the IMAP connection is closed. A successful NOTIFY SET command MUST cause the server to immediately return any accumulated changes to the currently selected mailbox (if any), such as flag changes and new or expunged messages. Thus, a successful NOTIFY SET command implies an implicit NOOP command. The NOTIFY SET command can request notifications of message-related changes to the selected mailbox, whatever that may be at the time the message notifications are being generated. This is done by specifying either the SELECTED or the SELECTED-DELAYED mailbox selector (seeSection 6.1) in the NOTIFY SET command. If the SELECTED/SELECTED-DELAYED mailbox selector is not specified in the NOTIFY SET command, this means that the client doesn't want to receive any <message-event>s for the currently selected mailbox. This is the same as specifying SELECTED NONE. The client can also request notifications on other mailboxes by name or by a limited mailbox pattern match. Message-related notifications returned for the currently selected mailbox will be those specified by the SELECTED/SELECTED-DELAYED mailbox specifier, even if the selected mailbox also appears by name (or matches a pattern) in the command. Non-message-related notifications are controlled by mailbox specifiers other than SELECTED/SELECTED-DELAYED. If the NOTIFY command enables MessageNew, MessageExpunge, AnnotationChange, or FlagChange notifications for a mailbox other than the currently selected mailbox, and the client has specified the STATUS indicator parameter, then the server MUST send a STATUS response for that mailbox before NOTIFY's tagged OK. If MessageNew is enabled, the STATUS response MUST contain MESSAGES, UIDNEXT, and UIDVALIDITY. If MessageExpunge is enabled, the STATUS response MUST contain MESSAGES. If either AnnotationChange or FlagChange areGulbrandsen, et al. Standards Track [Page 5]

RFC 5465 IMAP NOTIFY Extension February 2009 included and the server also supports the CONDSTORE [RFC4551] and/or QRESYNC [RFC5162] extensions, the STATUS response MUST contain UIDVALIDITY and HIGHESTMODSEQ. Absence of the STATUS indicator parameter allows the client to avoid the additional STATUS responses. This might be useful if the client already retrieved this information before issuing the NOTIFY command. Clients are advised to limit the number of mailboxes used with NOTIFY. Particularly, if a client asks for events for all accessible mailboxes, the server may swamp the client with updates about shared mailboxes. This may reduce the client's battery life. Also, this wastes both server and network resources. For each mailbox specified, the server verifies that the client has access using the following test: - If the name does not refer to an existing mailbox, the server MUST ignore it. - If the name refers to a mailbox that the client can't LIST, the server MUST ignore it. For a server that implements [RFC4314], this means that if the client doesn't have the 'l' (lookup) right for the name, then the server MUST ignore the mailbox. This behavior prevents disclosure of potentially confidential information to clients who don't have rights to know it. - If the name refers to a mailbox that the client can LIST (e.g., it has the 'l' right from [RFC4314]), but the client doesn't have another right required for processing of the specified event(s), then the server MUST respond with an untagged extended LIST response containing the \NoAccess name attribute. The server SHOULD return the tagged OK response if the client has access to at least one of the mailboxes specified in the current list of interesting events. The server MAY return the tagged NO response if the client has no access to any of the specified mailboxes and no access can ever be granted in the future (e.g., the client specified an event for 'Subtree Bar/Foo', 'Bar/Foo' doesn't exist, and LIST returns \Noinferiors for the parent 'Bar'). If the notification would be prohibitively expensive for the server (e.g., "notify me of all flag changes in all mailboxes"), the server MAY refuse the command with a tagged NO [NOTIFICATIONOVERFLOW] response.Gulbrandsen, et al. Standards Track [Page 6]

RFC 5465                 IMAP NOTIFY Extension             February 2009   If the client requests information for events of an unsupported type,   the server MUST refuse the command with a tagged NO response (not a   BAD).  This response SHOULD contain the BADEVENT response code, which   MUST list names of all events supported by the server.   Here's an example:         S: * OK [CAPABILITY IMAP4REV1 NOTIFY]         C: a login bob alice         S: a OK Password matched         C: b notify set status (selected MessageNew (uid            body.peek[header.fields (from to subject)]) MessageExpunge)            (subtree Lists MessageNew)         S: * STATUS Lists/Lemonade (UIDVALIDITY 4 UIDNEXT 9999 MESSAGES            500)         S: [...]         S: * STATUS Lists/Im2000 (UIDVALIDITY 901 UIDNEXT 1 MESSAGES 0)         S: b OK done         C: c select inbox         S: [...] (the usual 7-8 responses to SELECT)         S: c OK INBOX selected               (Time passes.  A new message is delivered to mailbox               Lists/Lemonade.)         S: * STATUS Lists/Lemonade (UIDVALIDITY 4 UIDNEXT 10000            MESSAGES 501)               (Time passes.  A new message is delivered to inbox.)         S: * 127 FETCH (UID 127001 BODY[HEADER.FIELDS (From To            Subject)] {75}         S: Subject: Re: good morning         S: From: alice@example.org         S: To: bob@example.org         S:         S: )               (Time passes.  The client decides it wants to know about               one more mailbox.  As the client already knows necessary               STATUS information for all mailboxes below the Lists               mailbox, and because "notify set status" would cause               STATUS responses for *all* mailboxes specified in the               NOTIFY command, including the ones for which the client               already knows STATUS information, the client issues an               explicit STATUS request for the mailbox to be added to               the watch list, followed by the NOTIFY SET without the               STATUS parameter.)         C: d STATUS misc (UIDVALIDITY UIDNEXT MESSAGES)         S: * STATUS misc (UIDVALIDITY 1 UIDNEXT 999)         S: d STATUS completedGulbrandsen, et al.         Standards Track                     [Page 7]

RFC 5465 IMAP NOTIFY Extension February 2009 C: e notify set (selected MessageNew (uid body.peek[header.fields (from to subject)]) MessageExpunge) (subtree Lists MessageNew) (mailboxes misc MessageNew) S: e OK done4. Interaction with the IDLE Command If IDLE [RFC2177] (as well as this extension) is supported, then while processing any IDLE command, the server MUST send exactly the same events as instructed by the client using the NOTIFY command. NOTIFY makes IDLE unnecessary for some clients. If a client does not use MSNs and '*' in commands, it can request MessageExpunge and MessageNew for the selected mailbox by using the NOTIFY command instead of entering the IDLE mode. A client that uses MSNs and '*' in commands can still use the NOTIFY command if it specifies the SELECTED-DELAYED mailbox specifier in the NOTIFY command.5. Event Types Only some of the events in [RFC5423] can be expressed in IMAP, and for some of them there are several possible ways to express the event. This section specifies the events of which an IMAP server can notify an IMAP client, and how. The server SHOULD omit notifying the client if the event is caused by this client. For example, if the client issues CREATE and has requested a MailboxName event that would cover the newly created mailbox, the server SHOULD NOT notify the client of the MailboxName change. All event types described in this document require the 'l' and 'r' rights (see [RFC4314]) on all observed mailboxes. Servers that don't implement [RFC4314] should map the above rights to their access- control model. If the FlagChange and/or AnnotationChange events are specified, MessageNew and MessageExpunge MUST also be specified by the client. Otherwise, the server MUST respond with the tagged BAD response. If one of MessageNew or MessageExpunge is specified, then both events MUST be specified. Otherwise, the server MUST respond with the tagged BAD response.Gulbrandsen, et al. Standards Track [Page 8]

RFC 5465 IMAP NOTIFY Extension February 2009 The client can instruct the server not to send an event by omitting the necessary event from the list of events specified in NOTIFY SET, by using the NONE event specifier in the NOTIFY SET, or by using NOTIFY NONE. In particular, NOTIFY SET ... NONE can be used as a snapshot facility by clients.5.1. FlagChange and AnnotationChange If the flag and/or message annotation change happens in the selected mailbox, the server MUST notify the client by sending an unsolicited FETCH response, which MUST include UID and FLAGS/ANNOTATION FETCH data items. It MAY also send new FLAGS and/or OK [PERMANENTFLAGS ...] responses. If a search context is in effect as specified in [RFC5267], an ESEARCH ADDTO or ESEARCH REMOVEFROM will also be generated, if appropriate. In this case, the FETCH response MUST precede the ESEARCH response. If the change happens in another mailbox, then the server responds with a STATUS response. The exact content of the STATUS response depends on various factors. If CONDSTORE [RFC4551] and/or QRESYNC [RFC5162] are enabled by the client, then the server sends a STATUS response that includes at least HIGHESTMODSEQ and UIDVALIDITY status data items. If the number of messages with the \Seen flag changes, the server MAY also include the UNSEEN data item in the STATUS response. If CONDSTORE/QRESYNC is not enabled by the client and the server chooses not to include the UNSEEN data item, the server does not notify the client. When this event is requested, the server MUST notify the client about mailbox UIDVALIDITY changes. This is done by sending a STATUS response that includes UIDVALIDITY. FlagChange covers the MessageRead, MessageTrash, FlagsSet, and FlagsClear events in [RFC5423]. Example in the selected mailbox: S: * 99 FETCH (UID 9999 FLAGS ($Junk)) And in another mailbox, with CONDSTORE in use: S: * STATUS Lists/Lemonade (HIGHESTMODSEQ 65666665 UIDVALIDITY 101)Gulbrandsen, et al. Standards Track [Page 9]

RFC 5465 IMAP NOTIFY Extension February 20095.2. MessageNew This covers both MessageNew and MessageAppend in [RFC5423]. If the new/appended message is in the selected mailbox, the server notifies the client by sending an unsolicited EXISTS response, followed by an unsolicited FETCH response containing the information requested by the client. A FETCH response SHOULD NOT be generated for a new message created by the client on this particular connection, for instance, as the result of an APPEND or COPY command to the selected mailbox performed by the client itself. The server MAY also send a RECENT response, if the server marks the message as \Recent. Note that a single EXISTS response can be returned for multiple MessageAppend/MessageNew events. If a search context is in effect as specified in [RFC5267], an ESEARCH ADDTO will also be generated, if appropriate. In this case, the EXISTS response MUST precede the ESEARCH response. Both the NOTIFY command and the SEARCH and SORT commands (seeSection 7) can specify attributes to be returned for new messages. These attributes SHOULD be combined into a single FETCH response. The server SHOULD avoid sending duplicate data. The FETCH response(s) MUST follow any ESEARCH ADDTO responses. If the new/appended message is in another mailbox, the server sends an unsolicited STATUS (UIDNEXT MESSAGES) response for the relevant mailbox. If the CONDSTORE extension [RFC4551] and/or the QRESYNC extension [RFC5162] is enabled, the HIGHESTMODSEQ status data item MUST be included in the STATUS response. The client SHOULD NOT use FETCH attributes that implicitly set the \seen flag, or that presuppose the existence of a given bodypart. UID, MODSEQ, FLAGS, ENVELOPE, BODY.PEEK[HEADER.FIELDS... and BODY/BODYSTRUCTURE may be the most useful attributes. Note that if a client asks to be notified of MessageNew events with the SELECTED mailbox specifier, the number of messages can increase at any time, and therefore the client cannot refer to a specific message using the MSN/UID '*'. Example in the selected mailbox: S: * 444 EXISTS S: * 444 FETCH (UID 9999) And in another mailbox, without CONDSTORE enabled: S: * STATUS Lists/Lemonade (UIDNEXT 10002 MESSAGES 503)Gulbrandsen, et al. Standards Track [Page 10]

RFC 5465 IMAP NOTIFY Extension February 20095.3. MessageExpunge If the expunged message or messages are in the selected mailbox, the server notifies the client using EXPUNGE (or VANISHED, if [RFC5162] is supported by the server and enabled by the client). If a search context is in effect, as specified in [RFC5267], an ESEARCH REMOVEFROM will also be generated, if appropriate. If the expunged message or messages are in another mailbox, the server sends an unsolicited STATUS (UIDNEXT MESSAGES) response for the relevant mailbox. If the QRESYNC [RFC5162] extension is enabled, the HIGHESTMODSEQ data item MUST be included in the STATUS response as well. Note that if a client requests MessageExpunge with the SELECTED mailbox specifier, the meaning of an MSN can change at any time, so the client cannot use MSNs in commands anymore. For example, such a client cannot use FETCH, but has to use UID FETCH. The meaning of '*' can also change when messages are added or expunged. A client wishing to keep using MSNs can either use the SELECTED-DELAYED mailbox specifier or can avoid using the MessageExpunge event entirely. The MessageExpunge notification covers both MessageExpunge and MessageExpire events from [RFC5423]. Example in the selected mailbox, without QRESYNC: S: * 444 EXPUNGE The same example in the selected mailbox, with QRESYNC: S: * VANISHED 5444 And in another mailbox, when QRESYNC is not enabled: S: * STATUS misc (UIDNEXT 999 MESSAGES 554)5.4. MailboxName These notifications are sent if an affected mailbox name was created (with CREATE), deleted (with DELETE), or renamed (with RENAME). For a server that implements [RFC4314], granting or revocation of the 'l' right to the current user on the affected mailbox MUST be considered mailbox creation or deletion, respectively. If a mailbox is created or deleted, the mailbox itself and its direct parent (whether it is an existing mailbox or not) are considered to be affected.Gulbrandsen, et al. Standards Track [Page 11]

RFC 5465                 IMAP NOTIFY Extension             February 2009   The server notifies the client by sending an unsolicited LIST   response for each affected mailbox name.  If, after the event, the   mailbox name does not refer to a mailbox accessible to the client,   the \Nonexistent flag MUST be included.   For each LISTable mailbox renamed, the server sends an extended LIST   response [RFC5258] for the new mailbox name, containing the OLDNAME   extended data item with the old mailbox name.  When a mailbox is   renamed, its children are renamed too.  No additional MailboxName   events are sent for children in this case.  When INBOX is renamed, a   new INBOX is assumed to be created.  No MailboxName event is sent for   INBOX in this case.   If the server automatically subscribes a mailbox when it is created   or renamed, then the unsolicited LIST response for each affected   subscribed mailbox name MUST include the \Subscribed attribute (see   [RFC5258]).  The server SHOULD also include \HasChildren or   \HasNoChildren attributes [RFC5258] as appropriate.   Example of a newly created mailbox (or granting of the 'l' right on   the mailbox):      S: * LIST () "/" "NewMailbox"   And a deleted mailbox (or revocation of the 'l' right on the   mailbox):      S: * LIST (\NonExistent) "." "INBOX.DeletedMailbox"   Example of a renamed mailbox:      S: * LIST () "/" "NewMailbox" ("OLDNAME" ("OldMailbox"))5.5.  SubscriptionChange   The server notifies the client by sending an unsolicited LIST   response for each affected mailbox name.  If and only if the mailbox   is subscribed after the event, the \Subscribed attribute (see   [RFC5258]) is included.  Note that in the LIST response, all mailbox   attributes MUST be accurately computed (this differs from the   behavior of the LSUB command).   Example:      S: * LIST (\Subscribed) "/" "SubscribedMailbox"5.6.  MailboxMetadataChange   Support for this event type is OPTIONAL unless the METADATA extension   [RFC5464] is also supported by the server, in which case support for   this event type is REQUIRED.Gulbrandsen, et al.         Standards Track                    [Page 12]

RFC 5465 IMAP NOTIFY Extension February 2009 A client willing to receive unsolicited METADATA responses as a result of using the MailboxMetadataChange event in the NOTIFY command doesn't have to issue ENABLE METADATA. The server sends an unsolicited METADATA response (as perSection4.4.2 of [RFC5464]). If possible, only the changed metadata SHOULD be included, but if the server can't detect a change to a single metadata item, it MAY include all metadata items set on the mailbox. If a metadata item is deleted (set to NIL), it MUST always be included in the METADATA response. Example: S: * METADATA "INBOX" /shared/comment5.7. ServerMetadataChange Support for this event type is OPTIONAL unless the METADATA or the METADATA-SERVER extension [RFC5464] is also supported by the server, in which case support for this event type is REQUIRED. A client willing to receive unsolicited METADATA responses as a result of using the ServerMetadataChange event in the NOTIFY command doesn't have to issue ENABLE METADATA or ENABLE METADATA-SERVER. The server sends an unsolicited METADATA response (as perSection4.4.2 of [RFC5464]). Only the names of changed metadata entries SHOULD be returned in such METADATA responses. If a metadata item is deleted (set to NIL), it MUST always be included in the METADATA response. Example: S: * METADATA "" /shared/comment5.8. Notification Overflow If the server is unable or unwilling to deliver as many notifications as it is being asked to, it may disable notifications for some or all clients. It MUST notify these clients by sending an untagged "OK [NOTIFICATIONOVERFLOW]" response and behave as if a NOTIFY NONE command had just been received. Example: S: * OK [NOTIFICATIONOVERFLOW] ...A comment can go here...Gulbrandsen, et al. Standards Track [Page 13]

RFC 5465                 IMAP NOTIFY Extension             February 20095.9.  ACL (Access Control List) Changes   Even if NOTIFY succeeds, it is still possible to lose access to the   mailboxes being monitored at a later time.  If this happens, the   server MUST stop monitoring these mailboxes.  If access is later   granted, the server MUST restart event monitoring.   The server SHOULD return the LIST response with the \NoAccess name   attribute if and when the mailbox loses the 'l' right.  Similarly,   the server SHOULD return the LIST response with no \NoAccess name   attribute if the mailbox was previously reported as having \NoAccess   and the 'l' right is later granted.6.  Mailbox Specification   Mailboxes to be monitored can be specified in several different ways.   Only 'SELECTED' and 'SELECTED-DELAYED' (Section 6.1) match the   currently selected mailbox.  All other mailbox specifications affect   other (non-selected) mailboxes.   Note that multiple <event-group>s can apply to the same mailbox.  The   following example demonstrates this.  In this example, MessageNew and   MessageExpunge events are reported for INBOX, due to the first   <event-group>.  A SubscriptionChange event will also be reported for   INBOX, due to the second <event-group>.      C: a notify set (mailboxes INBOX (Messagenew messageExpunge))         (personal (SubscriptionChange))   A typical client that supports the NOTIFY extension would ask for   events on the selected mailbox and some named mailboxes.   In the next example, the client asks for FlagChange events for all   personal mailboxes except the currently selected mailbox.  This is   different from the previous example because SELECTED overrides all   other message event definitions for the currently selected mailbox   (seeSection 3.1).      C: a notify set (selected (Messagenew (uid flags) messageExpunge))         (personal (MessageNew FlagChange MessageExpunge))6.1.  Mailbox Specifiers Affecting the Currently Selected Mailbox   Only one of the mailbox specifiers affecting the currently selected   mailbox can be specified in any NOTIFY command.  The two such mailbox   specifiers (SELECTED and SELECTED-DELAYED) are described below.Gulbrandsen, et al.         Standards Track                    [Page 14]

RFC 5465                 IMAP NOTIFY Extension             February 2009   Both refer to the mailbox that was selected using either SELECT or   EXAMINE (see [RFC3501], Sections6.3.1 and6.3.2).  When the IMAP   connection is not in the selected state, such mailbox specifiers   don't refer to any mailbox.   The mailbox specifiers only apply to <message-event>s.  It is an   error to specify other types of events with either the SELECTED or   the SELECTED-DELAYED selector.6.1.1.  Selected   The SELECTED mailbox specifier requires the server to send immediate   notifications for the currently selected mailbox about all specified   <message-event>s.6.1.2.  Selected-Delayed   The SELECTED-DELAYED mailbox specifier requires the server to delay a   MessageExpunge event until the client issues a command that allows   returning information about expunged messages (seeSection 7.4.1 of   [RFC3501] for more details), for example, till a NOOP or an IDLE   command has been issued.  When SELECTED-DELAYED is specified, the   server MAY also delay returning other <message-event>s until the   client issues one of the commands specified above, or it MAY return   them immediately.6.2.  Personal   Personal refers to all selectable mailboxes in the user's personal   namespace(s), as defined in [RFC2342].6.3.  Inboxes   Inboxes refers to all selectable mailboxes in the user's personal   namespace(s) to which messages may be delivered by a Message Delivery   Agent (MDA) (see [EMAIL-ARCH], particularlySection 4.3.3).   If the IMAP server cannot easily compute this set, it MUST treat   "inboxes" as equivalent to "personal".6.4.  Subscribed   Subscribed refers to all mailboxes subscribed to by the user.   If the subscription list changes, the server MUST reevaluate the   list.Gulbrandsen, et al.         Standards Track                    [Page 15]

RFC 5465                 IMAP NOTIFY Extension             February 20096.5.  Subtree   Subtree is followed by a mailbox name or list of mailbox names.  A   subtree refers to all selectable mailboxes that are subordinate to   the specified mailbox plus the specified mailbox itself.6.6.  Mailboxes   Mailboxes is followed by a mailbox name or a list of mailbox names.   The server MUST NOT do a wildcard expansion.  This means there is no   special treatment for the LIST wildcard characters ('*' and '%') if   they are present in mailbox names.7.  Extension to SEARCH and SORT Commands   If the server that supports the NOTIFY extension also supports   CONTEXT=SEARCH and/or CONTEXT=SORT as defined in [RFC5267], the   UPDATE return option is extended so that a client can request that   FETCH attributes be returned when a new message is added to the   context result set.   For example:         C: a00 SEARCH RETURN (COUNT UPDATE (UID BODY[HEADER.FIELDS (TO            FROM SUBJECT)])) FROM "boss"         S: * ESEARCH (TAG "a00") (COUNT 17)         S: a00 OK            [...a new message is delivered...]         S: * EXISTS 93         S: * 93 FETCH (UID 127001 BODY[HEADER.FIELDS (FROM TO SUBJECT)]            {76}         S: Subject: Re: good morning         S: From: myboss@example.org         S: To: bob@example.org         S:         S: )         S: * ESEARCH (TAG "a00") ADDTO (0 93)   Note that the EXISTS response MUST precede any FETCH responses, and   together they MUST precede the ESEARCH response.   No untagged FETCH response SHOULD be returned if a message becomes a   member of UPDATE SEARCH due to flag or annotation changes.Gulbrandsen, et al.         Standards Track                    [Page 16]

RFC 5465                 IMAP NOTIFY Extension             February 20098.  Formal Syntax   The following syntax specification uses the Augmented Backus-Naur   Form (ABNF) notation as specified in [RFC5234].  [RFC3501] defines   the non-terminals "capability", "command-auth", "mailbox", "mailbox-   data", "resp-text-code", and "search-key".  The "modifier-update"   non-terminal is defined in [RFC5267].  "mbx-list-oflag" is defined in   [RFC3501] and updated by [RFC5258].   Except as noted otherwise, all alphabetic characters are case-   insensitive.  The use of upper or lower case characters to define   token strings is for editorial clarity only.  Implementations MUST   accept these strings in a case-insensitive fashion.  For example, the   <filter-mailboxes-selected> non-terminal value "SELECTED" must be   treated in the same way as "Selected" or "selected".      capability      =/ "NOTIFY"      command-auth    =/ notify      notify          = "NOTIFY" SP                      (notify-set / notify-none)      notify-set      = "SET" [status-indicator] SP event-groups                      ; Replace registered notification events                      ; with the specified list of events      notify-none     = "NONE"                      ; Cancel all registered notification                      ; events.  The client is not interested                      ; in receiving any events.      status-indicator = SP "STATUS"      one-or-more-mailbox = mailbox / many-mailboxes      many-mailboxes  = "(" mailbox *(SP mailbox) ")"      event-groups    = event-group *(SP event-group)      event-group     = "(" filter-mailboxes SP events ")"                      ;; Only <message-event>s are allowed in <events>                      ;; when <filter-mailboxes-selected> is used.      filter-mailboxes = filter-mailboxes-selected /                      filter-mailboxes-otherGulbrandsen, et al.         Standards Track                    [Page 17]

RFC 5465                 IMAP NOTIFY Extension             February 2009      filter-mailboxes-other = "inboxes" / "personal" / "subscribed" /                      ( "subtree" SP one-or-more-mailbox ) /                      ( "mailboxes" SP one-or-more-mailbox )      filter-mailboxes-selected = "selected" / "selected-delayed"                      ;; Apply to the currently selected mailbox only.                      ;; Only one of them can be specified in a NOTIFY                      ;; command.      events          = ( "(" event *(SP event) ")" ) / "NONE"                      ;; As in [MSGEVENT].                      ;; "NONE" means that the client does not wish                      ;; to receive any events for the specified                      ;; mailboxes.      event           = message-event /                      mailbox-event / user-event / event-ext      message-event   = ( "MessageNew" [SP                          "(" fetch-att *(SP fetch-att) ")" ] )                      / "MessageExpunge"                      / "FlagChange"                      / "AnnotationChange"                      ;; "MessageNew" includes "MessageAppend" from                      ;; [MSGEVENT]. "FlagChange" is any of                      ;; "MessageRead", "MessageTrash", "FlagsSet",                      ;; "FlagsClear" [MSGEVENT]. "MessageExpunge"                      ;; includes "MessageExpire" [MSGEVENT].                      ;; MessageNew and MessageExpunge MUST always                      ;; be specified together.  If FlagChange is                      ;; specified, then MessageNew and MessageExpunge                      ;; MUST be specified as well.                      ;; The fett-att list may only be present for the                      ;; SELECTED/SELECTED-DELAYED mailbox filter                      ;; (<filter-mailboxes>).      mailbox-event   = "MailboxName" /                      "SubscriptionChange" / "MailboxMetadataChange"                      ; "SubscriptionChange" includes                      ; MailboxSubscribe and MailboxUnSubscribe.                      ; "MailboxName" includes MailboxCreate,                      ; "MailboxDelete" and "MailboxRename".      user-event      = "ServerMetadataChange"      event-ext       = atom                      ;; For future extensionsGulbrandsen, et al.         Standards Track                    [Page 18]

RFC 5465                 IMAP NOTIFY Extension             February 2009      oldname-extended-item =  "OLDNAME" SP "(" mailbox ")"                      ;; Extended data item (mbox-list-extended-item)                      ;; returned in a LIST response when a mailbox is                      ;; renamed.                      ;; Note 1: the OLDNAME tag can be returned                      ;; with or without surrounding quotes, as per                      ;; mbox-list-extended-item-tag production.      resp-text-code  =/ "NOTIFICATIONOVERFLOW" /                      unsupported-events-code      message-event-name   = "MessageNew" /                      "MessageExpunge" / "FlagChange" /                      "AnnotationChange"      event-name = message-event-name / mailbox-event /                      user-event      unsupported-events-code = "BADEVENT"                      SP "(" event-name *(SP event-name) ")"      modifier-update = "UPDATE"                      [ "(" fetch-att *(SP fetch-att) ")" ]      mbx-list-oflag =/ "\NoAccess"9.  Security Considerations   It is very easy for a client to deny itself service using NOTIFY.   Asking for all events on all mailboxes may work on a small server,   but with a big server, can swamp the client's network connection or   processing capability.  In the worst case, the server's processing   could also degrade the service it offers to other clients.   Server authors should be aware that if a client issues requests and   does not listen to the resulting responses, the TCP window can easily   fill up, and a careless server might block.  This problem also exists   in plain IMAP; however, this extension magnifies the problem.   This extension makes it possible to retrieve messages immediately   when they are added to the mailbox.  This makes it wholly impractical   to delete sensitive messages using programs like imapfilter.  Using   SIEVE [RFC5228] or similar is much better.Gulbrandsen, et al.         Standards Track                    [Page 19]

RFC 5465                 IMAP NOTIFY Extension             February 200910.  IANA Considerations   The IANA has added NOTIFY to the list of IMAP extensions.10.1.  Initial LIST-EXTENDED Extended Data Item Registrations   The following entry has been added to the LIST-EXTENDED response   registry [RFC5258]:   To: iana@iana.org   Subject: Registration of OLDNAME LIST-EXTENDED extended data item   LIST-EXTENDED extended data item tag: OLDNAME   LIST-EXTENDED extended data item description: The OLDNAME extended      data item describes the old mailbox name for the mailbox      identified by the LIST response.   Which LIST-EXTENDED option(s) (and their types) causes this extended      data item to be returned (if any): none   Published specification :RFC 5465, Section 5.4.   Security considerations: none   Intended usage: COMMON   Person and email address to contact for further information:  Alexey      Melnikov <Alexey.Melnikov@isode.com>   Owner/Change controller: iesg@ietf.org11.  Acknowledgments   The authors gratefully acknowledge the help of Peter Coates, Dave   Cridland, Mark Crispin, Cyrus Daboo, Abhijit Menon-Sen, Timo   Sirainen, and Eric Burger.  In particular, Peter Coates contributed   lots of text and useful suggestions to this document.   Various examples are copied from other RFCs.   This document builds on one published and two unpublished drafts by   the same authors.Gulbrandsen, et al.         Standards Track                    [Page 20]

RFC 5465                 IMAP NOTIFY Extension             February 200912.  Normative References   [RFC2119]    Bradner, S., "Key words for use in RFCs to Indicate                Requirement Levels",BCP 14,RFC 2119, March 1997.   [RFC2177]    Leiba, B., "IMAP4 IDLE command",RFC 2177, June 1997.   [RFC2342]    Gahrns, M. and C. Newman, "IMAP4 Namespace",RFC 2342,                May 1998.   [RFC3501]    Crispin, M., "INTERNET MESSAGE ACCESS PROTOCOL - VERSION                4rev1",RFC 3501, March 2003.   [RFC4314]    Melnikov, A., "IMAP4 Access Control List (ACL)                Extension",RFC 4314, December 2005.   [RFC4466]    Melnikov, A. and C. Daboo, "Collected Extensions to                IMAP4 ABNF",RFC 4466, April 2006.   [RFC4551]    Melnikov, A. and S. Hole, "IMAP Extension for                Conditional STORE Operation or Quick Flag Changes                Resynchronization",RFC 4551, June 2006.   [RFC5162]    Melnikov, A., Cridland, D., and C. Wilson, "IMAP4                Extensions for Quick Mailbox Resynchronization",RFC5162, March 2008.   [RFC5234]    Crocker, D., Ed., and P. Overell, "Augmented BNF for                Syntax Specifications: ABNF", STD 68,RFC 5234, January                2008.   [RFC5258]    Leiba, B. and A. Melnikov, "Internet Message Access                Protocol version 4 - LIST Command Extensions",RFC 5258,                June 2008.   [RFC5267]    Cridland, D. and C. King, "Contexts for IMAP4",RFC5267, July 2008.   [RFC5423]    Newman, C. and R. Gellens, "Internet Message Store                Events",RFC 5423, Month 2009.   [RFC5464]    Daboo, C., "The IMAP METADATA Extension",RFC 5464,                February 2009.13.  Informative References   [RFC5228]    Guenther, P., Ed., and T. Showalter, Ed., "Sieve: An                Email Filtering Language",RFC 5228, January 2008.Gulbrandsen, et al.         Standards Track                    [Page 21]

RFC 5465                 IMAP NOTIFY Extension             February 2009   [EMAIL-ARCH] Crocker, D.,"Internet Mail Architecture", Work in                Progress, October 2008.Authors' Addresses   Arnt Gulbrandsen   Oryx Mail Systems GmbH   Schweppermannstr. 8   D-81671 Muenchen   Germany   EMail: arnt@oryx.com   Curtis King   Isode Ltd   5 Castle Business Village   36 Station Road   Hampton, Middlesex  TW12 2BX   UK   EMail: Curtis.King@isode.com   Alexey Melnikov   Isode Ltd   5 Castle Business Village   36 Station Road   Hampton, Middlesex  TW12 2BX   UK   EMail: Alexey.Melnikov@isode.comGulbrandsen, et al.         Standards Track                    [Page 22]

[8]ページ先頭