Movatterモバイル変換


[0]ホーム

URL:


[RFC Home] [TEXT|PDF|HTML] [Tracker] [IPR] [Info page]

INFORMATIONAL
Network Working Group                                          M. TeradaRequest for Comments: 4154                                    NTT DoCoMoCategory: Informational                                      K. Fujimura                                                                     NTT                                                          September 2005Voucher Trading System Application Programming Interface (VTS-API)Status of This Memo   This memo provides information for the Internet community.  It does   not specify an Internet standard of any kind.  Distribution of this   memo is unlimited.Copyright Notice   Copyright (C) The Internet Society (2005).IESG Note   This document is not a candidate for any level of Internet Standard.   This document specifies the Voucher Trading System Application   Programming Interface (VTS-API), which assumes that the VTS plug-in   is trusted by its user.  The application making calls to VTS-API   ought to authenticate the VTS plug-in and securely bind the plug-in   with the VTS provider information specified in the Voucher Component.   However, this document does not specify an approach to application   authentication.  The VTS-API should not be used without being   augmented by an application authentication mechanism.Abstract   This document specifies the Voucher Trading System Application   Programming Interface (VTS-API).  The VTS-API allows a wallet or   other application to issue, transfer, and redeem vouchers in a   uniform manner independent of the VTS implementation.  The VTS is a   system for securely transferring vouchers; e.g., coupons, tickets,   loyalty points, and gift certificates.  This process is often   necessary in the course of payment and/or delivery transactions.Terada & Fujimura            Informational                      [Page 1]

RFC 4154                        VTS-API                   September 2005Table of Contents1.  Introduction .................................................32.  Processing Model .............................................43.  Design Overview ..............................................64.  Concepts .....................................................65.  Interface Definitions ........................................85.1. VTSManager ..............................................85.1.1. getParticipantRepository .........................85.1.2. getVoucherComponentRepository ....................85.2. ParticipantRepository ...................................95.2.1. lookup ...........................................95.3. Participant .............................................95.3.1. getIdentifier ....................................105.3.2. getVTSAgent ......................................105.4. VTSAgent ................................................105.4.1. login ............................................115.4.2. logout ...........................................125.4.3. prepare ..........................................125.4.4. issue ............................................135.4.5. transfer .........................................145.4.6. consume ..........................................155.4.7. present ..........................................165.4.8. cancel ...........................................175.4.9. resume ...........................................185.4.10. create ..........................................185.4.11. delete ..........................................195.4.12. getContents .....................................195.4.13. getSessions .....................................195.4.14. getLog ..........................................205.4.15. addReceptionListener ............................205.4.16. removeReceptionListener .........................215.5. Session .................................................215.5.1. getIdentifier ....................................215.5.2. getVoucher .......................................225.5.3. getSender ........................................225.5.4. getReceiver ......................................225.5.5. isPrepared .......................................225.5.6. isActivated ......................................235.5.7. isSuspended ......................................235.5.8. isCompleted ......................................235.6. Voucher .................................................235.6.1. getIssuer ........................................235.6.2. getPromise .......................................245.6.3. getCount .........................................245.7. VoucherComponentRepository ..............................245.7.1. register .........................................245.8. VoucherComponent ........................................25Terada & Fujimura            Informational                      [Page 2]

RFC 4154                        VTS-API                   September 20055.8.1. getIdentifier ....................................255.8.2. getDocument ......................................265.9. ReceptionListener .......................................265.9.1. arrive ...........................................265.10. Exceptions .............................................276.  Example Code .................................................287.  Security Considerations ......................................298.  Acknowledgements .............................................309.  Normative References .........................................3010. Informative References .......................................301.  Introduction   This document specifies the Voucher Trading System Application   Programming Interface (VTS-API).  The motivation and background of   the Voucher Trading System (VTS) are described in Requirements for   Generic Voucher Trading [VTS].   A voucher is a logical entity that represents a certain right, and it   is logically managed by the VTS.  A voucher is generated by the   issuer, traded among users, and finally collected using VTS.  The   terminology and model of the VTS are also described in [VTS].   VTSes can be implemented in different ways, such as a centralized   VTS, which uses a centralized online server to store and manage all   vouchers, or a distributed VTS, which uses per-user smartcards to   maintain the vouchers owned by each user.  However, the VTS-API   allows a caller application to issue, transfer, and redeem vouchers   in a uniform manner independent of the VTS implementation.  Several   attempts have been made to provide a generic payment API.  Java   Commerce Client [JCC] and Generic Payment Service Framework [GPSF],   for example, introduce a modular wallet architecture that permits   diverse types of payment modules to be added as plug-ins and supports   both check-like/cash-like payment models.  This document is inspired   by these approaches but its scope is limited to the VTS model, in   which the cash-like payment model is assumed and vouchers are   directly or indirectly transferred between the sender (transferor)   and receiver (transferee) via the VTS.  This document is not intended   to support API for SET, e-check, or other payment schemes that do not   fit the VTS model.   Unlike the APIs provided in JCC and GPSF, which are designed to   transfer only monetary values, this API enables the transfer of a   wide range of values through the use of XML-based Generic Voucher   Language [GVL].  The monetary meaning of the voucher is interpreted   by the upper application layer using the information described in the   language.  This approach makes it possible to provide a simpler API   in the voucher-transfer layer and enhances runtime efficiency.  TheTerada & Fujimura            Informational                      [Page 3]

RFC 4154                        VTS-API                   September 2005   API specification in this document is described in the Java language   syntax.  Bindings for other programming languages may be completed in   a future version of this document or in separate related   specifications.   The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT",   "SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL" in this   document are to be interpreted as described in [RFC2119]2.  Processing Model   This section provides the processing model in which the VTS-API is   used.  A part of the text in this section has been taken from the   Generic Voucher Language specification [GVL].   There are several ways to implement VTS.  For discount coupons or   event tickets, for example, a smartcard-based distributed offline VTS   is often preferred, whereas for bonds or securities, a centralized   online VTS is preferred.  While distributed VTSes would utilize   public (asymmetric) key-based or shared (symmetric) key-based   cryptographic challenge-and-response protocols to trade vouchers   securely, centralized VTSes would utilize transactions that rewrite   ownerships of vouchers on their database.  Therefore, it is   impractical to define standard protocols for issuing, transferring,   or redeeming vouchers at this time.   To provide implementation flexibility, this document assumes a   modular wallet architecture that allows multiple VTSes to be added as   plug-ins.  In this architecture, instead of specifying a standard   voucher transfer protocol, two specifications, Voucher Component and   VTS-API, are standardized (Figure 1).Terada & Fujimura            Informational                      [Page 4]

RFC 4154                        VTS-API                   September 2005   Sender wallet/Issuing system      Receiver wallet/Collecting system   +---------------------------+       +---------------------------+   |                           |       |                           |   |  |                    Voucher Component                    |  |   |  |          (Specifies VTS Provider and Promise)           |  |   |  |-------------------------------------------------------->|  |   |  |                        |       |                        |  |   |  |         Intention to receive and payment (option)       |  |   |  |<- - - - - - - - - - - - - - - - - - - - - - - - - - - - |  |   |  |                        |       |                        |  |   |  |                        |       |                        |  |   |  | Issue/transfer/  VTS   |       |   VTS      Register    |  |   |  | redeem request   plug-in       |   plug-in  Listener(*1)|  |   |  |------------------>|    |       |    |<------------------|  |   |  | (VTS API)         |<- - - - - - - ->|         (VTS API) |  |   |  |                   | VTS-specific    |                   |  |   |  |                   | protocol if VTS |                   |  |   |  |                   | is distributed  |                   |  |   |  |  Result           |<- - - - - - - ->|       Notify(*2)  |  |   |  |<------------------|    |       |    |------------------>|  |   +---------------------------+       +---------------------------+   (*1) Registration is optional.  Note also that the VTS plug-ins are        usually pre-registered when the wallet or collecting system        is started.   (*2) If a listener is registered.              Figure 1. Wallet architecture with VTS plug-ins   In this architecture, a VTS provides a logical view of vouchers   called a Valid Voucher Set (VVS), which is a set that includes the   vouchers <I,P,H> managed by the VTS [VTS].  A user's wallet can   access (e.g., view, transfer, and redeem) the subset of the VVS that   includes a set of vouchers owned by the user by interacting with the   VTS plug-in via the VTS-API.  Likewise, an issuing system can issue a   voucher and add it to the VVS, and a collecting system can be   notified of the redemption of vouchers via the VTS-API.   After a sender and a receiver agree on what vouchers are to be traded   and which VTS is to be used, the issuing system or wallet system   requests the corresponding VTS plug-in to permit the issue, transfer,   or redemption transactions to be performed via the VTS-API.  The VTS   then logically rewrites the ownership of the vouchers on the VVS   using the VTS-specific protocol.  Since the VTS is responsible for   preventing illegal acts on vouchers like forgery or reproduction, as   required in [VTS], the protocol would include a cryptographic   challenge-and-response (in a distributed VTS) or a transactionalTerada & Fujimura            Informational                      [Page 5]

RFC 4154                        VTS-API                   September 2005   database manipulation with adequate access controls (in a centralized   VTS).  Finally, a completion event is sent to the wallet systems or   issuing/collecting systems.   This document describes the VTS-API specification.  See [GVL] for the   Voucher Component specification that gives the syntax and semantics   for describing and interpreting the meaning of vouchers.3.  Design Overview   We have adopted the following approach to specify the VTS-API.      1) Provide an abstract and uniform API that encapsulates the VTS         implementation.  For example, a common API is provided for both         centralized and distributed VTSes.  Issuers and application         developers have more freedom in VTS selection.      2) To provide an abstract and uniform API, this document         introduces an interface called VTSAgent that is associated with         a holder and provides methods to manipulate vouchers held by         its holder.  Vouchers are accessed through the methods provided         by the VTSAgent.      3) Use existing standards for the VTS branding mechanism         (negotiation).  This document assumes that the VTS to be used         for sending a voucher has settled the VTS-APIs are called.         Negotiation can be done within the upper application layer         using other standards (e.g., [IOTP] or [ECML]), if necessary.      4) Support only the push-type voucher transfer interface, in which         the voucher transfer session is initiated by the transferor         side.  A pull-type voucher transfer interface can be         implemented on top of the push-type VTS interface at the         application level.4.  Concepts   The VTS-API consists of the following interfaces.  A VTS is required   to implement all of the interfaces except ReceptionListener, which is   intended to be implemented by wallets or other applications that use   VTS.      VTSManager         Provides the starting point for using a VTS plug-in.  All of         the objects needed to manipulate vouchers can be directly or         indirectly acquired via the VTSManager.  A VTSManager maintains         the two repositories: a ParticipantRepository and a         VoucherComponentRepository, both of which are described below.Terada & Fujimura            Informational                      [Page 6]

RFC 4154                        VTS-API                   September 2005      ParticipantRepository         Provides the access points of participants that are to be         trading partners.  A ParticipantRepository maintains         Participants and acts as an "address book" of trading partners.      Participant         Represents a participant (such as an issuer, a holder, or a         collector).  A Participant interface knows how to obtain the         corresponding VTSAgent described below.      VTSAgent (extends Participant)         Provides the access point of vouchers in the Valid Voucher Set         (VVS) that is logically managed by the VTS.  A VTSAgent         provides a means of manipulating vouchers held by its holder         according to basic trading methods; i.e., issue, transfer,         consume, and present.  Before calling trading methods, the         application must create a Session, which is described below.      Session         Represents the logical connection established by the trade.  A         Session has references to two Participant interfaces; i.e.,         those of the sender and the receiver.  After trading methods         are called using a Session, the Session holds a reference to         the Vouchers to be traded.      Voucher         Represents one or more vouchers in which all of the issuer and         promise parts of the vouchers are the same.  A Voucher holds         references to the Participant interface who issued the voucher         (issuer) and to a VoucherComponent (promise), which is         described below.      VoucherComponent         Represents a Voucher Component, described in [GVL].  It defines         the promise part of the voucher.      VoucherComponentRepository         Provides the access points of VoucherComponents.  A         VoucherComponentRepository maintains VoucherComponents and acts         as a "voucher type book" managed by the VTS.  This document         assumes that a set of VoucherComponents has been acquired and         stored in this repository.  Delivery of VoucherComponents is         beyond the scope of this document.  It may be delivered within         the VTS from the trading partners or manually acquired from a         trusted third party (see Section 3 of [GVL]).Terada & Fujimura            Informational                      [Page 7]

RFC 4154                        VTS-API                   September 2005      ReceptionListener         Provides a listener function with regard to the receipt of a         voucher by a VTSAgent to wallets or other applications that         implement this interface.  (This interface may not be         implemented as part of the VTS.)5.  Interface Definitions   The interfaces defined in this document reside in the package named   "org.ietf.vts".  Wallets or other applications that use this API,   should import this package as "import org.ietf.vts.*;".5.1.  VTSManager   public interface VTSManager      Provides the starting point for using a VTS plug-in.      All of the objects needed to manipulate vouchers can be directly      or indirectly acquired via a VTSManager so that wallets or other      applications can make the VTS available by instantiating an object      implementing this interface.      A class that implements the VTSManager interface must have a      public default constructor (a constructor without any parameters).      The VTS provides a name for such a constructor so that the      implementation class can bootstrap the interface.5.1.1.  getParticipantRepository   public ParticipantRepository getParticipantRepository()      Returns a repository that maintains Participants.   Returns:      the ParticipantRepository of the VTS, or null if no      ParticipantRepository is available.5.1.2.  getVoucherComponentRepository   public VoucherComponentRepository getVoucherComponentRepository()      Returns a repository that maintains VoucherComponents.Terada & Fujimura            Informational                      [Page 8]

RFC 4154                        VTS-API                   September 2005   Returns:      the VoucherComponentRepository of the VTS, or null if no      VoucherComponentRepository is available.5.2.  ParticipantRepository   public interface ParticipantRepository      Provides the access points of Participants.  A      ParticipantRepository maintains Participants and acts as an      "address book" of trading partners.      The object implementing this interface maintains Participants (or      holds a reference to an object maintaining Participants), which      are to be trading partners.      The implementation of a ParticipantRepository may be either (an      adaptor to) "yellow pages", which is a network-wide directory      service like LDAP, or "pocket address book", which maintains only      personal acquaintances.5.2.1.  lookup   public Participant lookup(String id)      Retrieves the participant that has the specified id.   Returns:      the participant associated with the specified id, or null if the      id is null or the corresponding participant cannot be found.5.3.  Participant   public interface Participant      Represents the participants (such as issuers, holders, and      collectors).      This interface is used as a representation of the trade partners      and issuers of vouchers.  Anyone can retrieve objects that      implement Participants from the participant repository.Terada & Fujimura            Informational                      [Page 9]

RFC 4154                        VTS-API                   September 20055.3.1.  getIdentifier   public String getIdentifier()      Returns the identifier of the participant.  Each participant must      have a unique identifier.      The identifier can be used for looking up and retrieving the      participant via the ParticipantRepository.      The format of the identifier is implementation-specific.   Returns:      the identifier string of the participant.5.3.2.  getVTSAgent   VTSAgent getVTSAgent()      Returns a VTSAgent, whose identifier is the same as the identifier      of the participant.   Returns:      an object that implements the VTSAgent.5.4.  VTSAgent   public interface VTSAgent extends Participant      Represents contact points to access vouchers in a Valid Voucher      Set (VVS) that is managed by the VTS.      Each VTSAgent is associated with a holder and provides a means for      managing vouchers owned by the holder.  The holder must be      authenticated using the login() method before being called by any      other method, otherwise, a VTSSecurityException will be issued.      Before any trading method is called, e.g., issue(), transfer(),      consume(), and present(), the application must establish a session      by the prepare() method.      Due to network failure, sessions may often be suspended when the      voucher is sent via a network.  The suspended sessions can be      restarted by the resume() method.  Details on the state management      of a session are described inSection 5.5.Terada & Fujimura            Informational                     [Page 10]

RFC 4154                        VTS-API                   September 2005      Some VTSAgents may not have all of the trading methods; a voucher      collecting system doesn't require its VTSAgent to provide a method      for issuing or creating vouchers.  A VTSAgent returns a      FeatureNotAvailableException when an unsupported method is      invoked.5.4.1.  login   public void login(String passphrase)          throws VTSException      Authenticates the VTSAgent.  The passphrase is specified if the      VTS requires it for authentication, otherwise it must be null.      Nothing is performed if the VTSAgent has already been logged-in.      The authentication scheme is implementation-specific.  Examples of      the implementation are as follows:      1) Vouchers are managed on a remote centralized server         (centralized VTS), which requires a password to login.  In this         case, the application may prompt the user to input the password         and the password can be given to the VTSAgent through this         method.  For further information, see the Implementation Notes         below.      2) Vouchers are managed on a remote centralized server         (centralized VTS), which requires challenge-and-response         authentication using smartcards held by users.  In this case,         the passphrase may be null because access to the smartcard can         be done without contacting the application or user (i.e., the         VTSAgent receives the challenge from the server, sends the         challenge to the smartcard (within the VTS), and returns the         response from the smartcard to the server).  Note that a PIN to         unlock the smartcard may be given through this method,         depending on the implementation.      3) Each user holds their own smartcard in which their own vouchers         are stored (distributed VTS).  In this case, the passphrase may         be null because no authentication is required.  Note that a PIN         to unlock the smartcard may be given, though this depends on         the implementation.      Implementation Notes:         A VTS is responsible for providing secure ways for users to         login().  It is strongly recommended that secure communication         channels such as [TLS] be used if secret or private information         is sent via networks.  Fake server attacks, including the so-         called MITM (man-in-the-middle), must be considered as well.Terada & Fujimura            Informational                     [Page 11]

RFC 4154                        VTS-API                   September 2005   Throws:      VTSSecurityException - if authentication fails.5.4.2.  logout   public void logout()          throws VTSException      Voids the authentication performed by the login() method.      After this method is called, calling any other method (except      login()) will cause a VTSSecurityException.      The VTSAgent can login again by the login() method.   Throws:      VTSSecurityException - if the VTSAgent is not authenticated      correctly.5.4.3.  prepare   public Session prepare(Participant receiver)          throws VTSException      Establishes a session that is required for trading vouchers.  The      trading partner who receives the vouchers is specified as the      receiver.  The vouchers to be traded will be specified later (when      a trading method is called).      The establishment of a session is implementation-specific.  A      centralized VTS implementation may start a transaction, while a      distributed VTS implementation may get the challenge needed to      create an authentic response from the receiver in the following      trading method.      If the VTSAgent does not have the ability to establish a session      with the specified receiver (permanent error), the VTSAgent throws      an InvalidParticipantExeption.  If the VTSAgent cannot establish a      session due to network failure (transient error), the VTSAgent      throws a CannotProceedException.   Parameters:      receiver - the trading partner who receives vouchers.Terada & Fujimura            Informational                     [Page 12]

RFC 4154                        VTS-API                   September 2005   Returns:      an established session whose state is "prepared" (seeSection5.5).   Throws:      CannotProceedException - if the preparation of the session is         aborted (e.g., network failures).      FeatureNotAvailableException - if the VTSAgent does not provide         any trading methods.      InvalidParticipantException - if the specified participant is         invalid.      VTSSecurityException - if the VTSAgent cannot be authenticated         correctly.5.4.4.  issue   public void issue(Session session,                     VoucherComponent promise,                     java.lang.Number num)          throws VTSException      Issues vouchers.  This method creates the specified number of      vouchers <this, promise, receiver> and adds them to the VVS.  If      the VTS is distributed, this method would create a "response" that      corresponds to the challenge received in the prepare() method and      send it to the receiver.  Note that the receiver is specified when      prepare() is called.  Nothing is performed if the specified number      is 0.      The session MUST be "prepared" when calling this method.  The      state of the session will be "activated" when the vouchers are      created, and it will be "completed" when the transaction is      successfully completed or "suspended" if the transaction is      interrupted abnormally (e.g., network failures).   Parameters:      session - the session used by the issue transaction.      promise - the promise part of the voucher.      num - the number of vouchers to be issued.Terada & Fujimura            Informational                     [Page 13]

RFC 4154                        VTS-API                   September 2005   Throws:      CannotProceedException - if the transaction cannot be successfully         completed.      FeatureNotAvailableException - if the VTSAgent does not provide a         means of issuing vouchers.      InvalidStateException - if the session is not "prepared".      VTSSecurityException - if the VTSAgent cannot be authenticated         correctly.5.4.5.  transfer   public void transfer(Session session,                        Participant issuer,                        VoucherComponent promise,                        java.lang.Number num)          throws VTSException      Transfers vouchers.  This method rewrites the specified number of      vouchers <issuer, promise, this> to <issuer, promise, receiver> in      the VVS; i.e., deletes the vouchers from the sender and stores      them for the receiver.  Similar to issue(), this method would      create and send the response to the receiver if the VTS is      distributed.  The VTSAgent must have sufficient vouchers in the      VVS.  Nothing is performed if the specified number is 0.      The session MUST be "prepared" when calling this method.  The      state of the session will be "activated" when the voucher are      retrieved from the sender, and it will be "completed" when the      transaction is successfully completed or "suspended" if the      transaction is interrupted abnormally (e.g., network failures).      If null is specified for the issuer parameter, it indicates "any      issuer".  This method selects vouchers to be transferred from the      set of vouchers returned by the getContents(null, promise).Terada & Fujimura            Informational                     [Page 14]

RFC 4154                        VTS-API                   September 2005   Parameters:      session - the session used by the transfer transaction.      issuer - the issuer part of the voucher, or null.      promise - the promise part of the voucher.      num - the number of vouchers to be transferred.   Throws:      CannotProceedException - if the transaction cannot be successfully         completed.      FeatureNotAvailableException - if the VTSAgent does not provide a         means of transferring vouchers.      InsufficientVoucherException - if the VTSAgent does not have a         sufficient number of vouchers to transfer.      InvalidStateException - if the session is not "prepared".      VTSSecurityException - if the VTSAgent cannot be authenticated         correctly.5.4.6.  consume   public void consume(Session session,                       Participant issuer,                       VoucherComponent promise,                       java.lang.Number num)          throws VTSException      Consumes vouchers.  This method deletes the specified number of      vouchers <issuer, promise, this> from the VVS and notifies the      receiver of the deletion.  Similar to issue() and transfer(), the      response would be created and sent to the receiver if the VTS is      distributed so that the receiver can obtain proof of the deletion.      The VTSAgent must have a sufficient number of vouchers in the VVS.      Nothing is performed if the specified number is 0.      The session MUST be "prepared" when this method is called.  The      state of the session will be "activated" when the vouchers are      deleted, and it will be "completed" when the transaction is      successfully completed or "suspended" if the transaction is      interrupted abnormally (e.g., network failures).Terada & Fujimura            Informational                     [Page 15]

RFC 4154                        VTS-API                   September 2005      If null is specified for the issuer parameter, it indicates "any      issuer".  This method selects vouchers to be consumed from the set      of vouchers returned by the getContents(null, promise).   Parameters:      session - the session used by the consume transaction.      issuer - the issuer part of the voucher, or null.      promise - the promise part of the voucher.      num - the number of vouchers to be consumed.   Throws:      CannotProceedException - if the transaction cannot be successfully         completed.      FeatureNotAvailableException - if the VTSAgent does not provide a         means of consuming vouchers.      InsufficientVoucherException - if the VTSAgent does not have a         sufficient number of vouchers to consume.      InvalidStateException - if the session is not "prepared".      VTSSecurityException - if the VTSAgent cannot be authenticated         correctly.5.4.7.  present   public void present(Session session,                       Participant issuer,                       VoucherComponent promise,                       java.lang.Number num)          throws VTSException      Presents vouchers.  This method shows that the sender has the      specified number of vouchers <issuer, promise, this> in the VVS to      the receiver of the session; no modification is performed to the      VVS.  However, the response would be sent to the receiver as well      as consume() in order to prove that the VTS has been distributed.      The VTSAgent must have a sufficient number of vouchers in the VVS.      Nothing is performed if the specified number is 0.      The session MUST be "prepared" when this method is called.  The      state of the session will be "activated" when the vouchers areTerada & Fujimura            Informational                     [Page 16]

RFC 4154                        VTS-API                   September 2005      retrieved, and it will be "completed" when the transaction is      successfully completed or "suspended" if the transaction is      interrupted abnormally (e.g., by network failures).      If null is specified for the issuer parameter, it indicates "any      issuer".  This method selects vouchers to be presented from the      set of vouchers returned by the getContents(null, promise).   Parameters:      session - the session used by the present transaction.      issuer - the issuer part of the voucher, or null.      promise - the promise part of the voucher.      num - the number of the voucher to be presented.   Throws:      CannotProceedException - if the transaction cannot be successfully         completed.      InsufficientVoucherException - if the VTSAgent does not have a         sufficient number of vouchers to present.      InvalidStateException - if the session is not "prepared".      FeatureNotAvailableException - if the VTSAgent does not provide a         means of presenting vouchers.      VTSSecurityException - if the VTSAgent cannot be authenticated         correctly.5.4.8.  cancel   public void cancel(Session session)          throws VTSException      Releases the session.  "Prepared" sessions MUST be canceled.  An      implementation MAY be permitted to cancel "activated" or      "suspended" sessions.   Throws:      InvalidStateException - if the state of the session cannot be         canceled.Terada & Fujimura            Informational                     [Page 17]

RFC 4154                        VTS-API                   September 2005      VTSSecurityException - if the VTSAgent cannot be authenticated         correctly.5.4.9.  resume   public void resume(Session session)          throws VTSException      Restarts the session.  Only "suspended" sessions can be resumed.      The state of the session will be re-"activated" immediately, and      it will be "completed" when the transaction is successfully      completed or "suspended" again if the transaction is interrupted      abnormally (e.g., network failures).   Throws:      CannotProceedException - if the transaction cannot be successfully         completed.      InvalidStateException - if the session is not "suspended".      VTSSecurityException - if the VTSAgent cannot be authenticated         correctly.5.4.10.  create   public void create(VoucherComponent promise, java.lang.Number num)          throws VTSException      Creates vouchers where the issuer is the VTSAgent itself.  This      method creates the specified number of vouchers <this, promise,      this> and adds them to the VVS.  Nothing is performed if the      specified number is 0.   Throws:      FeatureNotAvailableException - if the VTSAgent does not provide a         means of creating vouchers.      VTSSecurityException - if the VTSAgent cannot be authenticated         correctly.Terada & Fujimura            Informational                     [Page 18]

RFC 4154                        VTS-API                   September 20055.4.11.  delete   public void delete(Participant issuer, VoucherComponent promise,                      java.lang.Number num)          throws VTSException      Deletes vouchers.  This method deletes the specified number of      vouchers <issuer, promise, this> from the VVS.  The VTSAgent must      have sufficient vouchers in the VVS.  Nothing is performed if the      specified number is 0.   Throws:      InsufficientVoucherException - if the VTSAgent does not have a         sufficient number of vouchers to delete.      VTSSecurityException - if the VTSAgent cannot be authenticated         correctly.5.4.12.  getContents   public java.util.Set getContents(Participant issuer,                                    VoucherComponent promise)          throws VTSException      Returns the set of vouchers whose issuer and promise both match      the issuer and promise specified in the parameters.      If null is specified for the issuer or promise parameter, it      indicates "any issuer" or "any promise", respectively.  If null is      specified for both parameters, this method selects all vouchers      owned by the holder from the VVS.   Returns:      the set of vouchers held by the holder of the VTSAgent.   Throws:      VTSSecurityException - if the VTSAgent cannot be authenticated         correctly.5.4.13.  getSessions   public java.util.Set getSessions()          throws VTSException      Returns a set of incomplete sessions prepared by the VTSAgent.Terada & Fujimura            Informational                     [Page 19]

RFC 4154                        VTS-API                   September 2005   Returns:      the set of sessions prepared by the VTSAgent that are not yet      completed.   Throws:      VTSSecurityException - if the VTSAgent cannot be authenticated         correctly.5.4.14.  getLog   public java.util.Set getLog()          throws VTSException      Returns a set of completed sessions prepared or received by the      VTSAgent.  This set represents the trading log of the VTSAgent.  A      VTS may delete an old log eventually, so that the entire log may      not be returned; the amount of the log kept by the VTSAgent is      implementation-specific.   Returns:      the set of completed sessions prepared or received by the      VTSAgent.   Throws:      VTSSecurityException - if the VTSAgent cannot be authenticated         correctly.5.4.15.  addReceptionListener   public void addReceptionListener(ReceptionListener l)          throws VTSException      Adds a ReceptionListener to the listener list.      After a ReceptionListener l is registered by this method,      l.arrive() will be called whenever the VTSAgent receives a      voucher.      Nothing is performed if the specified listener is null.   Throws:      VTSSecurityException - if the VTSAgent cannot be authenticated         correctly.Terada & Fujimura            Informational                     [Page 20]

RFC 4154                        VTS-API                   September 20055.4.16.  removeReceptionListener   public void removeReceptionListener(ReceptionListener l)          throws VTSException      Removes a ReceptionListener from the listener list.      Nothing is performed when the specified listener is null or not      registered.   Throws:      VTSSecurityException - if the VTSAgent cannot be authenticated         correctly.5.5.  Session   public interface Session      Represents the logical connection established by the trade.      Sessions are established by VTSAgent#prepare().      A session has four states: prepared, activated, suspended, and      completed.  The initial state of a session is "prepared", and the      session will be "activated" immediately when any of the trading      methods of VTSAgent is called.  The "activated" session will be      "completed" after the trading method is successfully completed.      If the trading method fails transiently (e.g., network failure),      the session will be "suspended".  Suspended sessions can be re-      "activated" and restarted by calling VTSAgent#resume().      A completed session may disappear from the VTSAgent; the session      will be collected by the GC unless other objects keep its      reference.5.5.1.  getIdentifier   public String getIdentifier()      Returns the identifier of the session.  The generation scheme of      the identifier is implementation-specific.  An implementation may      use a transaction ID as the identifier of the session.   Returns:      the string of the identifier of the session.Terada & Fujimura            Informational                     [Page 21]

RFC 4154                        VTS-API                   September 20055.5.2.  getVoucher   public Voucher getVoucher()      Returns the voucher to be traded using the session, or returns      null if the session has not been activated.   Returns:      the voucher to be traded, or null if the state of the session is      "prepared".5.5.3.  getSender   public Participant getSender()      Returns the sender of the session (i.e., the creator who prepared      the session).   Returns:      the sender of the session.5.5.4.  getReceiver   public Participant getReceiver()      Returns the receiver of the session (i.e., the participant      specified when preparing the session (by the VTSAgent#prepare()      method)).   Returns:      the receiver of the session.5.5.5.  isPrepared   public boolean isPrepared()      Verifies if the session is "prepared".   Returns:      true if the session is in the "prepared" state, otherwise, false.Terada & Fujimura            Informational                     [Page 22]

RFC 4154                        VTS-API                   September 20055.5.6.  isActivated   public boolean isActivated()      Verifies if the session is "activated".   Returns:      true if the session is in the "activated" state, otherwise, false.5.5.7.  isSuspended   public boolean isSuspended()      Verifies if the session is "suspended".   Returns:      true if the session is in the "suspended" state, otherwise, false.5.5.8.  isCompleted   public boolean isCompleted()      Verifies if the session is "completed".   Returns:      true if the session is in the "completed" state, otherwise, false.5.6.  Voucher   public interface Voucher      Represents voucher(s) described in [VTS].  An object implementing      this interface can represent more than one voucher if all of the      issuer part and the promise part of the vouchers are the same.5.6.1.  getIssuer   public Participant getIssuer()      Returns the issuer part of the voucher(s).   Returns:      the participant who issued the voucher(s).Terada & Fujimura            Informational                     [Page 23]

RFC 4154                        VTS-API                   September 20055.6.2.  getPromise   public VoucherComponent getPromise()      Returns the promise part of the voucher(s).   Returns:      the voucher component that defines the promise of the voucher.5.6.3.  getCount   public java.lang.Number getCount()      Returns the number of the voucher(s).   Returns:      the positive (>0) number of the voucher(s).5.7.  VoucherComponentRepository   public interface VoucherComponentRepository      Maintains VoucherComponents.      An object implementing VoucherComponentRepository provides a means      of retrieving the voucher components that are the promises of      vouchers in the VVS.      Before issuing a voucher, the promise of the voucher must be      registered with this repository.  The repository can be      implemented as either a network-wide directory service or personal      storage like the ParticipantRepository.5.7.1.  register   public VoucherComponent register(org.w3c.dom.Document document)      Creates a voucher component associated with the specified DOM      object and registers the voucher component with the repository.      A voucher component of the voucher to be issued must be registered      using this method.      Nothing is performed (and the method returns null) if the      specified document is null or the syntax of the document does not      conform to the VTS.Terada & Fujimura            Informational                     [Page 24]

RFC 4154                        VTS-API                   September 2005      The method returns the registered voucher component if the      specified DOM object has been already registered (no new voucher      component is created in this case).   Returns:      a registered voucher component associated with the specified      document, or null if the document is null or has wrong syntax.5.8.  VoucherComponent   public interface VoucherComponent      Represents the voucher component that defines the promise of the      voucher.      Each VoucherComponent object has its own unique identifier and is      associated with an XML document that describes the promise made by      the issuer of the voucher (e.g., goods or services can be claimed      in exchange for redeeming the voucher).      This interface can be implemented as sort of a "smart pointer" to      the XML document.  An implementation may have a reference to a      voucher component repository instead of the voucher component, and      it may retrieve the document dynamically from the repository when      the getDocument() method is called.5.8.1.  getIdentifier   public String getIdentifier()      Returns the identifier of the voucher component.  Each voucher      component must have a unique identifier.  The identifier may be      used to check for equivalence of voucher components.      The format of the identifier is implementation-specific, however,      it is RECOMMENDED that the hash value of the voucher component in      the identifier be included to assure uniqueness.  For generating      the hash value, it is desirable to use a secure hash function      (e.g., [SHA-1]) and to apply a canonicalization function (e.g.,      [EXC-C14N]) before applying the hash function to minimize the      impact of insignificant format changes to the voucher component,      (e.g., line breaks or character encoding).   Returns:      the identifier string of the voucher component.Terada & Fujimura            Informational                     [Page 25]

RFC 4154                        VTS-API                   September 20055.8.2.  getDocument   public org.w3c.dom.Document getDocument()      Returns a Document Object Model [DOM] representation of the      document associated with the voucher component by the      VoucherComponentRepository#register() method.      The DOM object to be returned may be retrieved from a      VoucherComponentRepository on demand, instead of the      VoucherComponent always keeping a reference to the DOM object.      The VTS must guarantee that the getDocument method will eventually      return the DOM object, provided that the voucher associated with      the corresponding voucher component exists in the VVS.   Returns:      a DOM representation of the document associated with the voucher      component.   Throws:      DocumentNotFoundException - if the associated DOM object cannot be         retrieved.5.9.  ReceptionListener   public interface ReceptionListener extends java.util.EventListener      Provides a listener interface with a notification that a VTSAgent      has received a voucher.      When a voucher arrives at the VTSAgent, the VTSAgent invokes the      arrive() method of each registered ReceptionListener.      ReceptionListeners can obtain a Session object, which contains      information about the received voucher and the sender of the      voucher.      This interface is intended to provide a means of notifying a      wallet that "You have new vouchers", so that this interface may be      implemented by wallets or other applications that use VTS.5.9.1.  arrive   public void arrive(Session session)      Provides notification of the arrival of a voucher.Terada & Fujimura            Informational                     [Page 26]

RFC 4154                        VTS-API                   September 2005      After the listener is registered to a VTSAgent (by the      VTSAgent#addReceptionListener() method), the VTSAgent invokes this      method whenever it receives a voucher.      The specified session is equivalent to the session used by the      sender to trade the voucher.  The state of the session is      "completed" when this method is called.5.10.  Exceptions      java.lang.Exception        +-- VTSException            +-- CannotProceedException            +-- DocumentNotFoundException            +-- FeatureNotAvailableException            +-- InsufficientVoucherException            +-- InvalidParticipantException            +-- InvalidStateException            +-- VTSSecurityException   VTSException      This is the superclass of all exceptions thrown by the methods in      the interfaces that construct the VTS-API.   CannotProceedException      This exception is thrown when a trading is interrupted by network      failures or other errors.   DocumentNotFoundException      This exception is thrown when the document associated with a      voucher component cannot be found.   FeatureNotAvailableException      This exception is thrown when the invoked method is not supported.   InsufficientVoucherException      This exception is thrown when the number of the voucher is less      than the number specified for trading.   InvalidParticipantException      This exception is thrown when the specified participant cannot be      located.   InvalidStateException      This exception is thrown when the state of the session is invalid      and the operation cannot proceed.Terada & Fujimura            Informational                     [Page 27]

RFC 4154                        VTS-API                   September 2005   VTSSecurityException      This exception is thrown when authentication fails, or when a      method that requires authentication in advance is called without      authentication.6.  Example Code   // Issue a voucher   VTSManager vts = new FooVTSManager();   ParticipantRepository addrBook = vts.getParticipantRepository();   VoucherComponentRepository vcr = vts.getVoucherComponentRepository();   Participant you = addrBook.lookup("http://example.org/foo");     // looks up a trading partner identified as     // "http://example.org/foo".   VTSAgent me = addrBook.lookup("myName").getVTSAgent();     // a short-cut name may be used if VTS implementation allows.   VoucherComponent promise = vcr.register(anXMLVoucherDocument);     // registers a voucher component that corresponds to the voucher     // to be issued.   try {     me.login();       // sets up the issuer's smartcard (assuming distributed VTS).     s = me.prepare(you);       // receives a challenge from the partner.     me.issue(s, promise, 1);       // sends a voucher using the received challenge.     me.logout();   } catch (VTSException e) {       // if an error (e.g., a network trouble) occurs...     System.err.println("Sorry.");     e.printStackTrace();       // this example simply prints a stack trace, but a real wallet       // may prompt the user to retry (or cancel).   }   // Transfer all my vouchers   VTSManager vts = new FooVTSManager();   ParticipantRepository addrBook = vts.getParticipantRepository();   Participant you = addrBook.lookup("8f42 5aab ffff cafe babe...");     // some VTS implementations would use a hash value of a public key     // (aka fingerprint) as an identifier of a participant.   VTSAgent me = addrBook.lookup("myName").getVTSAgent();Terada & Fujimura            Informational                     [Page 28]

RFC 4154                        VTS-API                   September 2005   try {     me.login();     Iterator i = me.getContents(null, null).iterator();     while (i.hasNext()) {       Voucher v = (Voucher) i.next();       s = me.prepare(you);       me.transfer(s, v.getIssuer(), v.getPromise(), v.getCount());     }     me.logout();   } catch (VTSException e) {     System.err.println("Sorry.");     e.printStackTrace();   }   // Register an incoming voucher notifier (biff)   VTSManager vts = new FooVTSManager();   ParticipantRepository addrBook = vts.getParticipantRepository();   VTSAgent me = addrBook.lookup("myName").getVTSAgent();   ReceptionListener listener = new ReceptionListener() {     public void arrive(Session s) {       System.out.println("You got a new voucher.");     }   };   try {     me.login();     me.addReceptionListener(listener);     me.logout();   } catch (VTSException e) {     System.err.println("Sorry.");     e.printStackTrace();   }7.  Security Considerations   Security is very important for trading vouchers.  VTS implementations   are responsible for preventing illegal acts upon vouchers (as   described in [VTS]), as well as preventing malicious access from   invalid users and fake server attacks, including man-in-the-middle   attacks.   The means to achieve the above requirements are not specified in this   document because they depend on VTS implementation.  However,Terada & Fujimura            Informational                     [Page 29]

RFC 4154                        VTS-API                   September 2005   securing communication channels (e.g., using TLS) between client VTS   plug-ins and the central server in a centralized VTS (as described in   5.4.1 login()), and applying cryptographic challenge-and-response   techniques in a distributed VTS are likely to be helpful and are   strongly recommended to implement a secure VTS.   This document assumes that the VTS plug-in is trusted by its user.   The caller application of a VTS should authenticate the VTS plug-in   and bind it securely using the VTS Provider information specified in   the Voucher Component.  This document, however, does not specify any   application authentication scheme and it is assumed to be specified   by other related standards.  Until various VTS systems are deployed,   it is enough to manually check and install VTS plug-ins like other   download applications.8.  Acknowledgements   The following persons, in alphabetic order, contributed substantially   to the material herein:      Donald Eastlake 3rd      Iguchi Makoto      Yoshitaka Nakamura      Ryuji Shoda9.  Normative References   [DOM]      V. Apparao, S. Byrne, M. Champion, S. Isaacs, I. Jacobs,              A. Le Hors, G. Nicol, J. Robie, R. Sutor, C. Wilson, and              L. Wood.  "Document Object Model (DOM) Level 1              Specification", W3C Recommendation, October 1998,              <http://www.w3.org/TR/1998/REC-DOM-Level-1-19981001/>   [GVL]      Fujimura, K. and M. Terada, "XML Voucher: Generic Voucher              Language",RFC 4153, September 2005.   [RFC2119]  Bradner, S., "Key words for use in RFCs to Indicate              Requirement Levels",BCP 14,RFC 2119, March 1997.10.  Informative References   [ECML]     Eastlake 3rd, D., "Electronic Commerce Modeling Language              (ECML) Version 2 Specification",RFC 4112, June 2005.   [EXC-C14N] J. Boyer, D. Eastlake, and J. Reagle, "Exclusive XML              Canonicalization Version 1.0", W3C Recommendation, July              2002, <http://www.w3.org/TR/2002/REC-xml-exc-c14n-20020718/>Terada & Fujimura            Informational                     [Page 30]

RFC 4154                        VTS-API                   September 2005   [GPSF]     G. Lacoste, B. Pfitzmann, M. Steiner, and M. Waidner              (Eds.), "SEMPER - Secure Electronic Marketplace for              Europe," LNCS 1854, Springer-Verlag, 2000.   [IOTP]     Burdett, D., "Internet Open Trading Protocol - IOTP              Version 1.0",RFC 2801, April 2000.   [JCC]      T. Goldstein, "The Gateway Security Model in the Java              Electronic Commerce Framework", Proc. of Financial              Cryptography '97, 1997.   [SHA-1]    Department of Commerce/National Institute of Standards and              Technology, "FIPS PUB 180-1. Secure Hash Standard. U.S.",              <http://csrc.nist.gov/publications/fips/fips180-2/fips180-2withchangenotice.pdf>   [TLS]      Dierks, T. and C. Allen, "The TLS Protocol Version 1.0",RFC 2246, January 1999.   [VTS]      Fujimura, K. and D. Eastlake, "Requirements and Design for              Voucher Trading System (VTS)",RFC 3506, March 2003.Authors' Addresses   Masayuki Terada   NTT DoCoMo, Inc.   3-5 Hikari-no-oka, Yokosuka-shi, Kanagawa, 239-8536 JAPAN   Phone: +81-(0)46-840-3809   Fax:   +81-(0)46-840-3705   EMail: te@rex.yrp.nttdocomo.co.jp   Ko Fujimura   NTT Corporation   1-1 Hikari-no-oka, Yokosuka-shi, Kanagawa, 239-0847 JAPAN   Phone: +81-(0)46-859-3053   Fax:   +81-(0)46-859-1730   EMail: fujimura.ko@lab.ntt.co.jpTerada & Fujimura            Informational                     [Page 31]

RFC 4154                        VTS-API                   September 2005Full Copyright Statement   Copyright (C) The Internet Society (2005).   This document is subject to the rights, licenses and restrictions   contained inBCP 78, and except as set forth therein, the authors   retain all their rights.   This document and the information contained herein are provided on an   "AS IS" basis and THE CONTRIBUTOR, THE ORGANIZATION HE/SHE REPRESENTS   OR IS SPONSORED BY (IF ANY), THE INTERNET SOCIETY AND THE INTERNET   ENGINEERING TASK FORCE DISCLAIM ALL WARRANTIES, EXPRESS OR IMPLIED,   INCLUDING BUT NOT LIMITED TO ANY WARRANTY THAT THE USE OF THE   INFORMATION HEREIN WILL NOT INFRINGE ANY RIGHTS OR ANY IMPLIED   WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.Intellectual Property   The IETF takes no position regarding the validity or scope of any   Intellectual Property Rights or other rights that might be claimed to   pertain to the implementation or use of the technology described in   this document or the extent to which any license under such rights   might or might not be available; nor does it represent that it has   made any independent effort to identify any such rights.  Information   on the procedures with respect to rights in RFC documents can be   found inBCP 78 andBCP 79.   Copies of IPR disclosures made to the IETF Secretariat and any   assurances of licenses to be made available, or the result of an   attempt made to obtain a general license or permission for the use of   such proprietary rights by implementers or users of this   specification can be obtained from the IETF on-line IPR repository athttp://www.ietf.org/ipr.   The IETF invites any interested party to bring to its attention any   copyrights, patents or patent applications, or other proprietary   rights that may cover technology that may be required to implement   this standard.  Please address the information to the IETF at ietf-   ipr@ietf.org.Acknowledgement   Funding for the RFC Editor function is currently provided by the   Internet Society.Terada & Fujimura            Informational                     [Page 32]

[8]ページ先頭

©2009-2025 Movatter.jp