Movatterモバイル変換


[0]ホーム

URL:


[RFC Home] [TEXT|PDF|HTML] [Tracker] [IPR] [Info page]

PROPOSED STANDARD
Internet Engineering Task Force (IETF)                      K. MurchisonRequest for Comments: 8054                    Carnegie Mellon UniversityCategory: Standards Track                                        J. ElieISSN: 2070-1721                                             January 2017Network News Transfer Protocol (NNTP)Extension for CompressionAbstract   This document defines an extension to the Network News Transport   Protocol (NNTP) that allows a connection to be effectively and   efficiently compressed between an NNTP client and server.Status of This Memo   This is an Internet Standards Track document.   This document is a product of the Internet Engineering Task Force   (IETF).  It represents the consensus of the IETF community.  It has   received public review and has been approved for publication by the   Internet Engineering Steering Group (IESG).  Further information on   Internet Standards is available inSection 2 of RFC 7841.   Information about the current status of this document, any errata,   and how to provide feedback on it may be obtained athttp://www.rfc-editor.org/info/rfc8054.Copyright Notice   Copyright (c) 2017 IETF Trust and the persons identified as the   document authors.  All rights reserved.   This document is subject toBCP 78 and the IETF Trust's Legal   Provisions Relating to IETF Documents   (http://trustee.ietf.org/license-info) in effect on the date of   publication of this document.  Please review these documents   carefully, as they describe your rights and restrictions with respect   to this document.  Code Components extracted from this document must   include Simplified BSD License text as described in Section 4.e of   the Trust Legal Provisions and are provided without warranty as   described in the Simplified BSD License.Murchison & Elie             Standards Track                    [Page 1]

RFC 8054             NNTP Extension for Compression         January 2017Table of Contents1.  Introduction  . . . . . . . . . . . . . . . . . . . . . . . .31.1.  About TLS-Level Compression . . . . . . . . . . . . . . .31.2.  Conventions Used in This Document . . . . . . . . . . . .42.  The COMPRESS Extension  . . . . . . . . . . . . . . . . . . .42.1.  Advertising the COMPRESS Extension  . . . . . . . . . . .42.2.  COMPRESS Command  . . . . . . . . . . . . . . . . . . . .52.2.1.  Usage . . . . . . . . . . . . . . . . . . . . . . . .52.2.2.  Description . . . . . . . . . . . . . . . . . . . . .62.2.3.  Examples  . . . . . . . . . . . . . . . . . . . . . .83.  Compression Efficiency  . . . . . . . . . . . . . . . . . . .114.  DEFLATE Specificities . . . . . . . . . . . . . . . . . . . .125.  Augmented BNF Syntax for the COMPRESS Extension . . . . . . .135.1.  Commands  . . . . . . . . . . . . . . . . . . . . . . . .135.2.  Capability Entries  . . . . . . . . . . . . . . . . . . .135.3.  General Non-terminals . . . . . . . . . . . . . . . . . .136.  Summary of Response Codes . . . . . . . . . . . . . . . . . .137.  Security Considerations . . . . . . . . . . . . . . . . . . .148.  IANA Considerations . . . . . . . . . . . . . . . . . . . . .158.1.  "NNTP Compression Algorithms" Registry  . . . . . . . . .158.1.1.  Algorithm Name Registration Procedure . . . . . . . .168.1.2.  Comments on Algorithm Registrations . . . . . . . . .178.1.3.  Change Control  . . . . . . . . . . . . . . . . . . .178.2.  Registration of the DEFLATE Compression Algorithm . . . .188.3.  Registration of the NNTP COMPRESS Extension . . . . . . .189.  References  . . . . . . . . . . . . . . . . . . . . . . . . .209.1.  Normative References  . . . . . . . . . . . . . . . . . .209.2.  Informative References  . . . . . . . . . . . . . . . . .20   Acknowledgments . . . . . . . . . . . . . . . . . . . . . . . . .22   Authors' Addresses  . . . . . . . . . . . . . . . . . . . . . . .23Murchison & Elie             Standards Track                    [Page 2]

RFC 8054             NNTP Extension for Compression         January 20171.  Introduction   The goal of COMPRESS is to reduce the bandwidth usage of NNTP.   Compared to PPP compression [RFC1962] and modem-based compression   ([MNP] and [V42bis]), COMPRESS offers greater compression efficiency.   COMPRESS can be used together with Transport Layer Security (TLS)   [RFC5246], Simple Authentication and Security Layer (SASL) encryption   [RFC4422], Virtual Private Networks (VPNs), etc.   The point of COMPRESS as an NNTP extension is to act as a compression   layer, similar to a security layer like the one negotiated by   STARTTLS [RFC4642].  Therefore, compression can be beneficial to all   NNTP commands sent or received after the use of COMPRESS.  This   facility responds to a long-standing need for NNTP to compress data.   It is currently addressed only partially by unstandardized commands   like XZVER, XZHDR, XFEATURE COMPRESS, or MODE COMPRESS.  Yet, these   commands are not wholly satisfactory because they enable compression   only for the responses sent by the news server.  In comparison, the   COMPRESS command permits the compression of data sent by both the   client and the server, and removes the constraint of having to   implement compression separately in each NNTP command.  Besides, the   compression level can be dynamically adjusted and optimized at any   time during the connection, which even allows disabling compression   for certain commands, if needed.  If the news client wants to stop   compression on a particular connection, it can simply use QUIT   ([RFC3977], Section 5.4) and establish a new connection.  For these   reasons, using other NNTP commands than COMPRESS to enable   compression is discouraged once COMPRESS is supported.   In order to increase interoperability, it is desirable to have as few   different compression algorithms as possible, so this document   specifies only one.  The DEFLATE algorithm (defined in [RFC1951])   MUST be implemented as part of this extension.  This compression   algorithm is standard, widely available, and fairly efficient.   This specification should be read in conjunction with the NNTP base   specification [RFC3977].  In the case of a conflict between these two   documents, [RFC3977] takes precedence.1.1.  About TLS-Level Compression   Though lossless data compression is already possible via the use of   TLS with NNTP [RFC4642], the best current practice is to disable TLS-   level compression as explained inSection 3.3 of [RFC7525].  The   COMPRESS command will permit keeping the compression facility in   NNTP, and control when it is available during a connection.Murchison & Elie             Standards Track                    [Page 3]

RFC 8054             NNTP Extension for Compression         January 2017   Compared to TLS-level compression [RFC3749], NNTP COMPRESS has the   following advantages:   o  COMPRESS can be implemented easily both by NNTP servers and      clients.   o  COMPRESS benefits from an intimate knowledge of the NNTP      protocol's state machine, allowing for dynamic and aggressive      optimization of the underlying compression algorithm's parameters.   o  COMPRESS can be activated after authentication has completed, thus      reducing the chances that authentication credentials can be leaked      via, for instance, a CRIME attack ([RFC7457], Section 2.6).1.2.  Conventions Used in This Document   The notational conventions used in this document are the same as   those in [RFC3977], and any term not defined in this document has the   same meaning as it does in that one.   The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT",   "SHOULD", "SHOULD NOT", "RECOMMENDED", "NOT RECOMMENDED", "MAY", and   "OPTIONAL" in this document are to be interpreted as described in   [RFC2119].   In the examples, commands from the client are indicated with [C], and   responses from the server are indicated with [S].  The client is the   initiator of the NNTP connection; the server is the other endpoint.2.  The COMPRESS Extension   The COMPRESS extension is used to enable lossless data compression on   an NNTP connection.   This extension provides a new COMPRESS command and has the capability   label COMPRESS.2.1.  Advertising the COMPRESS Extension   A server supporting the COMPRESS command as defined in this document   will advertise the "COMPRESS" capability label in response to the   CAPABILITIES command ([RFC3977], Section 5.2).  However, this   capability MUST NOT be advertised once a compression layer is active   (seeSection 2.2.2).  This capability MAY be advertised both before   and after any use of the MODE READER command ([RFC3977],   Section 5.3), with the same semantics.Murchison & Elie             Standards Track                    [Page 4]

RFC 8054             NNTP Extension for Compression         January 2017   The COMPRESS capability label contains a whitespace-separated list of   available compression algorithms.  This document defines one   compression algorithm: DEFLATE.  This algorithm is mandatory to   implement; it MUST be supported and listed in the advertisement of   the COMPRESS extension.   Future extensions may add additional compression algorithms to this   capability.  Unrecognized algorithms MUST be ignored by the client.   Example:      [C] CAPABILITIES      [S] 101 Capability list:      [S] VERSION 2      [S] READER      [S] IHAVE      [S] COMPRESS DEFLATE SHRINK      [S] LIST ACTIVE NEWSGROUPS      [S] .   As the COMPRESS command is related to security because it can weaken   encryption, cached results of CAPABILITIES from a previous session   MUST NOT be relied on, as perSection 12.6 of [RFC3977].2.2.  COMPRESS Command2.2.1.  Usage   This command MUST NOT be pipelined.   Syntax     COMPRESS algorithm   Responses     206 Compression active     403 Unable to activate compression     502 Command unavailable [1]   [1] If a compression layer is already active, COMPRESS is not a valid       command (seeSection 2.2.2).   Parameters     algorithm = Name of compression algorithm (e.g., "DEFLATE")Murchison & Elie             Standards Track                    [Page 5]

RFC 8054             NNTP Extension for Compression         January 20172.2.2.  Description   The COMPRESS command instructs the server to use the named   compression algorithm ("DEFLATE" is the only one defined in this   document) for all commands and responses after COMPRESS.   The client MUST NOT send any further commands until it has seen the   result of COMPRESS.   If the requested compression algorithm is syntactically incorrect,   the server MUST reject the COMPRESS command with a 501 response code   ([RFC3977], Section 3.2.1).  If the requested compression algorithm   is invalid (e.g., is not supported), the server MUST reject the   COMPRESS command with a 503 response code ([RFC3977], Section 3.2.1).   If the server is unable to activate compression for any reason (e.g.,   a server configuration or resource problem), the server MUST reject   the COMPRESS command with a 403 response code ([RFC3977],   Section 3.2.1).  Otherwise, in case no other generic response code   representing the situation applies, the server issues a 206 response   code and the compression layer takes effect for both client and   server immediately following the CRLF of the success reply.   Additionally, the client MUST NOT issue a MODE READER command after   activating a compression layer, and a server MUST NOT advertise the   MODE-READER capability.   Both the client and the server MUST know if there is a compression   layer active (for instance, via the previous use of the COMPRESS   command or the negotiation of a TLS-level compression method   [RFC3749]).  A client MUST NOT attempt to activate compression (for   instance, via the COMPRESS command) or negotiate a TLS security layer   (because STARTTLS [RFC4642] may activate TLS-level compression) if a   compression layer is already active.  A server MUST NOT return the   COMPRESS or STARTTLS capability labels in response to a CAPABILITIES   command received after a compression layer is active, and a server   MUST reply with a 502 response code if a syntactically valid COMPRESS   or STARTTLS command is received while a compression layer is already   active.   In order to help mitigate leaking authentication credentials via, for   instance, a CRIME attack [CRIME], authentication MUST NOT be   attempted after a successful use of the COMPRESS command.   Consequently, a server MUST either list the AUTHINFO capability with   no arguments or not advertise it at all, in response to a   CAPABILITIES command received from an unauthenticated client after a   successful use of the COMPRESS command, and such a client MUST NOT   attempt to utilize any AUTHINFO [RFC4643] commands.  This implies   that a server MUST reply with a 502 response code if a syntacticallyMurchison & Elie             Standards Track                    [Page 6]

RFC 8054             NNTP Extension for Compression         January 2017   valid AUTHINFO command is received after a successful use of the   COMPRESS command.  (Note that this specification does not change the   behavior of AUTHINFO as described in [RFC4643] independently of TLS-   level compression.  Authentication is therefore still allowed, even   though TLS-level compression is active.)   For DEFLATE [RFC1951] (as for many other compression algorithms), the   sending compressor can trade speed against compression ratio.  The   receiving decompressor MUST automatically adjust to the parameters   selected by the sender.  Consequently, the client and server are both   free to pick the best reasonable rate of compression for the data   they send.  Besides, all data that was submitted for compression MUST   be included in the compressed output, and appropriately flushed so as   to ensure that the receiving decompressor can completely decompress   it.   When COMPRESS is combined with TLS [RFC5246] or SASL [RFC4422]   security layers, the processing order of the three layers MUST be   first COMPRESS, then SASL, and finally TLS.  That is, before data is   transmitted, it is first compressed.  Second, if a SASL security   layer has been negotiated, the compressed data is then signed and/or   encrypted accordingly.  Third, if a TLS security layer has been   negotiated, the data from the previous step is signed and/or   encrypted accordingly (with a possible additional TLS-level   compression).  When receiving data, the processing order MUST be   reversed.  This ensures that before sending, data is compressed   before it is encrypted.   When compression is active and either the client or the server   receives invalid or corrupted compressed data, the receiving end   immediately closes the connection, in response to which the sending   end will do the same.Murchison & Elie             Standards Track                    [Page 7]

RFC 8054             NNTP Extension for Compression         January 20172.2.3.  Examples   Example of layering a TLS security layer and NNTP compression:      [C] CAPABILITIES      [S] 101 Capability list:      [S] VERSION 2      [S] READER      [S] STARTTLS      [S] AUTHINFO      [S] COMPRESS DEFLATE      [S] LIST ACTIVE NEWSGROUPS      [S] .      [C] STARTTLS      [S] 382 Continue with TLS negotiation      [TLS negotiation without compression occurs here]      [Following successful negotiation, all traffic is encrypted]      [C] CAPABILITIES      [S] 101 Capability list:      [S] VERSION 2      [S] READER      [S] AUTHINFO USER      [S] COMPRESS DEFLATE      [S] LIST ACTIVE NEWSGROUPS      [S] .      [C] AUTHINFO USER fred      [S] 381 Enter passphrase      [C] AUTHINFO PASS flintstone      [S] 281 Authentication accepted      [C] CAPABILITIES      [S] 101 Capability list:      [S] VERSION 2      [S] READER      [S] POST      [S] COMPRESS DEFLATE      [S] LIST ACTIVE NEWSGROUPS      [S] .      [C] COMPRESS DEFLATE      [S] 206 Compression active      [Henceforth, all traffic is compressed before being encrypted]      [C] CAPABILITIES      [S] 101 Capability list:      [S] VERSION 2      [S] READER      [S] POST      [S] LIST ACTIVE NEWSGROUPS      [S] .Murchison & Elie             Standards Track                    [Page 8]

RFC 8054             NNTP Extension for Compression         January 2017   Example of a server failing to activate compression:      [C] CAPABILITIES      [S] 101 Capability list:      [S] VERSION 2      [S] IHAVE      [S] COMPRESS DEFLATE      [S] .      [C] COMPRESS DEFLATE      [S] 403 Unable to activate compression   Example of attempting to use an unsupported compression algorithm:      [C] CAPABILITIES      [S] 101 Capability list:      [S] VERSION 2      [S] IHAVE      [S] COMPRESS DEFLATE      [S] .      [C] COMPRESS SHRINK      [S] 503 Compression algorithm not supported   Example of a server refusing to compress twice:      [C] CAPABILITIES      [S] 101 Capability list:      [S] VERSION 2      [S] IHAVE      [S] STARTTLS      [S] COMPRESS DEFLATE      [S] .      [C] STARTTLS      [S] 382 Continue with TLS negotiation      [TLS negotiation with compression occurs here]      [Following successful negotiation, all traffic is encrypted]      [C] CAPABILITIES      [S] 101 Capability list:      [S] VERSION 2      [S] IHAVE      [S] .      [C] COMPRESS DEFLATE      [S] 502 Compression already active via TLSMurchison & Elie             Standards Track                    [Page 9]

RFC 8054             NNTP Extension for Compression         January 2017   Example of a server refusing to negotiate a TLS security layer after   compression has been activated:      [C] CAPABILITIES      [S] 101 Capability list:      [S] VERSION 2      [S] IHAVE      [S] STARTTLS      [S] COMPRESS DEFLATE      [S] .      [C] COMPRESS DEFLATE      [S] 206 Compression active      [Henceforth, all traffic is compressed]      [C] CAPABILITIES      [S] 101 Capability list:      [S] VERSION 2      [S] IHAVE      [S] .      [C] STARTTLS      [S] 502 DEFLATE compression already active   Example of a server not advertising AUTHINFO arguments after   compression has been activated:      [C] CAPABILITIES      [S] 101 Capability list:      [S] VERSION 2      [S] READER      [S] AUTHINFO USER      [S] COMPRESS DEFLATE      [S] LIST ACTIVE NEWSGROUPS      [S] .      [C] COMPRESS DEFLATE      [S] 206 Compression active      [Henceforth, all traffic is compressed]      [C] CAPABILITIES      [S] 101 Capability list:      [S] VERSION 2      [S] READER      [S] AUTHINFO      [S] LIST ACTIVE NEWSGROUPS      [S] .      [C] AUTHINFO USER fred      [S] 502 DEFLATE compression already activeMurchison & Elie             Standards Track                   [Page 10]

RFC 8054             NNTP Extension for Compression         January 20173.  Compression Efficiency   This section is informative, not normative.   NNTP poses some unusual problems for a compression layer.   Upstream traffic is fairly simple.  Most NNTP clients send the same   few commands again and again, so any compression algorithm that can   exploit repetition works efficiently.  The article posting and   transfer commands (e.g., POST, IHAVE, and TAKETHIS [RFC4644]) are   exceptions; clients that send many article posting or transfer   commands may want to surround large multi-line data blocks with a   dictionary flush and/or, depending on the compression algorithm, a   change of compression level in the same way as is recommended for   servers later in this document (Section 4).   Downstream traffic has the unusual property that several kinds of   data are sent, possibly confusing a dictionary-based compression   algorithm.   NNTP responses that are not related to article header/body retrieval   are one type.  Compressing NNTP simple responses (e.g., in answer to   CHECK [RFC4644], DATE, GROUP, LAST, NEXT, STAT, etc.) generally does   not save many bytes, unless repeated several times in the same NNTP   session.  On the contrary, most of the NNTP multi-line responses   (e.g., in answer to LIST, LISTGROUP, NEWGROUPS, NEWNEWS, etc.) are   highly compressible; using its least CPU-intensive setting, zlib   compresses typical responses to 25-40% of their original size.   Article headers (as retrieved, for instance, via the HEAD, HDR, OVER,   or ARTICLE commands) are another type.  These are equally   compressible, and benefit from using the same dictionary as the NNTP   responses.   A third type is article body text (as retrieved, for instance, via   the BODY or ARTICLE commands).  Text is usually fairly short and   includes much ASCII, so the same compression dictionary will do a   good job here, too.  When multiple messages in the same thread are   read at the same time, quoted lines, etc., can often be compressed   almost to zero.   Finally, non-text article bodies or attachments (as retrieved, for   instance, via the BODY or ARTICLE commands) are transmitted in   encoded form, usually Base64 [RFC4648], UUencode [IEEE.1003.1-2008],   or yEnc [yEnc].Murchison & Elie             Standards Track                   [Page 11]

RFC 8054             NNTP Extension for Compression         January 2017   When such non-text article bodies or attachments are retrieved, a   compression algorithm may be able to compress them, but the format of   their encoding is usually not NNTP-like, so the dictionary built   while compressing NNTP does not help much.  The compressor has to   adapt its dictionary from NNTP to the attachment's encoding format,   and then back.   When attachments are retrieved in Base64 or UUencode form, the   Huffman coding usually compresses those to approximately only 75% of   their encoding size.  8-bit compression algorithms such as DEFLATE   work well on 8-bit file formats; however, both Base64 and UUencode   transform a file into something resembling 6-bit bytes, hiding most   of the 8-bit file format from the compressor.   On the other end, attachments encoded using a compression algorithm   that retains the full 8-bit spectrum, like yEnc, are much more likely   to be incompressible.4.  DEFLATE Specificities   When using the zlib library (see [RFC1951]), the functions   deflateInit2(), deflate(), inflateInit2(), and inflate() suffice to   implement this extension.   The windowBits value MUST be in the range -8 to -15 for   deflateInit2(), or else it will use the wrong format.  The windowBits   value SHOULD be -15 for inflateInit2(), or else it will not be able   to decompress a stream with a larger window size, thus reducing   interoperability.  deflateParams() can be used to improve compression   rate and resource use.  Regarding flush operations, the Z_FULL_FLUSH   argument to deflate() permits to clear the dictionary, which   generally results in compression that is less effective than   performing a Z_PARTIAL_FLUSH.  As a matter of fact, keeping the 32 KB   dictionary from previous data, no matter how unrelated, can be of   help (if there are no matching strings in there, then it is simply   not referenced).   A server can improve downstream compression and the CPU efficiency of   both the server and the client if it adjusts the compression level   (e.g., using the deflateParams() function in zlib) at the start and   end of large non-text multi-line data blocks (before and after   'content-lines' in the definition of 'multi-line-data-block' in[RFC3977], Section 9.8).  This mechanism prevents the server from   trying to compress incompressible attachments.Murchison & Elie             Standards Track                   [Page 12]

RFC 8054             NNTP Extension for Compression         January 2017   A very simple strategy is to change the compression level to 0 at the   start of an incompressible multi-line data block, for instance when   encoded using yEnc [yEnc], and to keep it at 1-5 the rest of the   time.  More complex strategies are, of course, possible and   encouraged.5.  Augmented BNF Syntax for the COMPRESS Extension   This section describes the formal syntax of the COMPRESS extension   using ABNF [RFC7405] and [RFC5234].  It extends the syntax inSection 9 of [RFC3977], and non-terminals not defined in this   document are defined there.  The NNTP ABNF [RFC3977] should be   imported first, before attempting to validate these rules.5.1.  Commands   This syntax extends the non-terminal <command>, which represents an   NNTP command.     command =/ compress-command     compress-command = "COMPRESS" WS algorithm5.2.  Capability Entries   This syntax extends the non-terminal <capability-entry>, which   represents a capability that may be advertised by the server.     capability-entry =/ compress-capability     compress-capability = "COMPRESS" 1*(WS algorithm)5.3.  General Non-terminals     algorithm = %s"DEFLATE" / 1*20alg-char  ; case-sensitive     alg-char = UPPER / DIGIT / "-" / "_"6.  Summary of Response Codes   This section defines the following new response code.  It is not   multi-line and has no arguments.   Response code 206      Generated by: COMPRESS      Meaning: compression layer activatedMurchison & Elie             Standards Track                   [Page 13]

RFC 8054             NNTP Extension for Compression         January 20177.  Security Considerations   Security issues are discussed throughout this document.   In general, the security considerations of the NNTP core   specification ([RFC3977], Section 12) and the DEFLATE compressed data   format specification ([RFC1951], Section 6) are applicable here.   Implementers should be aware that combining compression with   encryption like TLS can sometimes reveal information that would not   have been revealed without compression, as explained inSection 6 of   [RFC3749].  As a matter of fact, adversaries that observe the length   of the compressed data might be able to derive information about the   corresponding uncompressed data.  The CRIME and the BREACH attacks   ([RFC7457], Section 2.6) are examples of such case.   In order to help mitigate leaking authentication credentials, this   document states inSection 2.2.2 that authentication MUST NOT be   attempted after a successful use of COMPRESS.  Therefore, when a   client wants to authenticate, compress data, and negotiate a TLS   security layer (without TLS-level compression) in the same NNTP   connection, it MUST use the STARTTLS, AUTHINFO, and COMPRESS commands   in that order.  Of course, instead of using the STARTTLS command, a   client can also use implicit TLS, that is to say it begins the TLS   negotiation immediately upon connection on a separate port dedicated   to NNTP over TLS.   NNTP commands other than AUTHINFO are not believed to divulge   confidential information as long as only public Netnews newsgroups   and articles are accessed.  That is why this specification only   prohibits the use of AUTHINFO after COMPRESS.  In case confidential   articles are accessed in private newsgroups, special care is needed:   implementations SHOULD NOT compress confidential data together with   public data when a TLS [RFC5246] or SASL [RFC4422] security layer is   active.  As a matter of fact, adversaries that observe the length of   the compressed data might be able to derive information about it,   when public data (that adversaries know is read) and confidential   data are compressed in the same compression session.   Additionally, it is preferable not to compress the contents of two   distinct confidential articles together if it can be avoided, as   adversaries might be able to derive information about them (for   instance, if they have a few header fields or body lines in common).   This can be achieved, for instance, with DEFLATE by clearing the   compression dictionary each time a confidential article is sent.   More complex implementations are, of course, possible and encouraged.Murchison & Elie             Standards Track                   [Page 14]

RFC 8054             NNTP Extension for Compression         January 2017   Implementations are encouraged to unconditionally allow compression   when no security layer is active, and to support an option to enable   or disable compression when a security layer is active.  Such an   option could, for instance, have global scope or be server/   connection-based.  Besides, as compression may in general weaken the   confidentiality of a security layer, implementations SHOULD NOT   automatically enable compression when a security layer is active   unless the user explicitly enabled it with this knowledge.   Future extensions to NNTP that define commands conveying confidential   data SHOULD be sure to state that these confidential data SHOULD NOT   be compressed together with public data when a security layer is   active.   Last but not least, careful consideration should be given to   protections against implementation errors that introduce security   risks with regards to compression algorithms.  See, for instance, the   part ofSection 6 of [RFC3749] about compression algorithms that can   occasionally expand, rather than compress, input data.8.  IANA Considerations8.1.  "NNTP Compression Algorithms" Registry   The "NNTP Compression Algorithms" registry is maintained by IANA.   The registry is available at   <http://www.iana.org/assignments/nntp-parameters>.   The purpose of this registry is not only to ensure uniqueness of   values used to name NNTP compression algorithms, but also to provide   a definitive reference to technical specifications detailing each   NNTP compression algorithm available for use on the Internet.   An NNTP compression algorithm is either a private algorithm, or its   name is included in the IANA "NNTP Compression Algorithms" registry   (in which case it is a "registered NNTP compression algorithm").   Different entries in the registry MUST use different names.   Private algorithms with unregistered names are allowed, but SHOULD   NOT be used because it is difficult to achieve interoperability with   them.   The 206, 403, and 502 response codes that a news server answers to   the COMPRESS command using a private compression algorithm MUST have   the same meaning as the one documented inSection 2.2 of this   document.Murchison & Elie             Standards Track                   [Page 15]

RFC 8054             NNTP Extension for Compression         January 2017   The procedure detailed inSection 8.1.1 is to be used for   registration of a value naming a specific individual compression   algorithm.   Any name that conforms to the syntax of an NNTP compression algorithm   name (Section 5.3) can be used.  Especially, NNTP compression   algorithms are named by strings, from 1 to 20 characters in length,   consisting of uppercase letters, digits, hyphens, and/or underscores.   Comments may be included in the registry as discussed inSection 8.1.2 and may be changed as discussed inSection 8.1.3.8.1.1.  Algorithm Name Registration Procedure   IANA will register new NNTP compression algorithm names on a First   Come First Served basis, as defined inBCP 26 [RFC5226].  IANA has   the right to reject obviously bogus registration requests, but will   not perform a review of claims made in the registration form.   Registration of an NNTP compression algorithm is requested by filling   in the following template and sending it via electronic mail to IANA   at <iana@iana.org>:      Subject: Registration of NNTP compression algorithm Z      NNTP compression algorithm name:      Security considerations:      Published specification (recommended):      Contact for further information:      Intended usage: (One of COMMON, LIMITED USE, or OBSOLETE)      Owner/Change controller:      Note: (Any other information that the author deems relevant may be             added here.)   While this registration procedure does not require expert review,   authors of NNTP compression algorithms are encouraged to seek   community review and comment whenever that is feasible.  Authors may   seek community review by posting a specification of their proposed   algorithm as an Internet-Draft.  NNTP compression algorithms intended   for widespread use should be standardized through the normal IETF   process, when appropriate.Murchison & Elie             Standards Track                   [Page 16]

RFC 8054             NNTP Extension for Compression         January 20178.1.2.  Comments on Algorithm Registrations   Comments on a registered NNTP compression algorithm should first be   sent to the "owner" of the algorithm and/or to the mailing list for   the now concluded NNTPEXT working group (<ietf-nntp@lists.eyrie.org>)   of the IETF.   Submitters of comments may, after a reasonable attempt to contact the   owner and/or the above mailing list, request IANA to attach their   comment to the NNTP compression algorithm registration itself by   sending mail to <iana@iana.org>.  At IANA's sole discretion, IANA may   attach the comment to the NNTP compression algorithm's registration.8.1.3.  Change Control   Once an NNTP compression algorithm registration has been published by   IANA, the owner may request a change to its definition.  The change   request follows the same procedure as the initial registration   request.   The owner of an NNTP compression algorithm may pass responsibility   for the algorithm to another person or agency by informing IANA; this   can be done without discussion or review.   The IESG may reassign responsibility for an NNTP compression   algorithm.  The most common case of this will be to enable changes to   be made to algorithms where the owner of the registration has died,   has moved out of contact, or is otherwise unable to make changes that   are important to the community.   NNTP compression algorithm registrations MUST NOT be deleted;   algorithms that are no longer believed appropriate for use can be   declared OBSOLETE by a change to their "intended usage" field; such   algorithms will be clearly marked in the registry published by IANA.   The IESG is considered to be the owner of all NNTP compression   algorithms that are on the IETF Standards Track.Murchison & Elie             Standards Track                   [Page 17]

RFC 8054             NNTP Extension for Compression         January 20178.2.  Registration of the DEFLATE Compression Algorithm   This section gives a formal definition of the DEFLATE compression   algorithm as required bySection 8.1.1 for the IANA registry.      NNTP compression algorithm name: DEFLATE      Security considerations: SeeSection 7 of this document      Published specification: This document      Contact for further information: Authors of this document      Intended usage: COMMON      Owner/Change controller: IESG <iesg@ietf.org>      Note: This algorithm is mandatory to implement   This registration appears as follows in the "NNTP Compression   Algorithms" registry:   +------------+------------+--------------+--------------+-----------+   | Algorithm  | Intended   | Comment      | Change       | Reference |   | Name       | Usage      |              | Controller   |           |   +------------+------------+--------------+--------------+-----------+   | DEFLATE    | COMMON     | Mandatory to | IESG         |RFC 8054  |   |            |            | implement    |              |           |   +------------+------------+--------------+--------------+-----------+8.3.  Registration of the NNTP COMPRESS Extension   This section gives a formal definition of the COMPRESS extension as   required bySection 3.3.3 of [RFC3977] for the IANA registry.   o  The COMPRESS extension allows an NNTP connection to be effectively      and efficiently compressed.   o  The capability label for this extension is "COMPRESS", whose      arguments list the available compression algorithms.   o  This extension defines one new command, COMPRESS, whose behavior,      arguments, and responses are defined inSection 2.2.   o  This extension does not associate any new responses with      pre-existing NNTP commands.Murchison & Elie             Standards Track                   [Page 18]

RFC 8054             NNTP Extension for Compression         January 2017   o  This extension does affect the overall behavior of both server and      client, in that after successful use of the COMPRESS command, all      communication is transmitted in a compressed format.   o  This extension does not affect the maximum length of commands or      initial response lines.   o  This extension does not alter pipelining, but the COMPRESS command      cannot be pipelined.   o  Use of this extension does alter the capabilities list; once the      COMPRESS command has been used successfully, the COMPRESS      capability can no longer be advertised by CAPABILITIES.      Additionally, the STARTTLS and MODE-READER capabilities MUST NOT      be advertised, and the AUTHINFO capability label MUST either be      listed with no arguments or not advertised at all after a      successful execution of the COMPRESS command.   o  This extension does not cause any pre-existing command to produce      a 401, 480, or 483 response code.   o  This extension is unaffected by any use of the MODE READER      command; however, the MODE READER command MUST NOT be used in the      same session following a successful execution of the COMPRESS      command.   o  The STARTTLS and AUTHINFO commands MUST NOT be used in the same      session following a successful execution of the COMPRESS command.   o  Published Specification: This document.   o  Contact for Further Information: Authors of this document.   o  Change Controller: IESG <iesg@ietf.org>   This registration will appear as follows in the "NNTP Capability   Labels" registry contained in the "Network News Transfer Protocol   (NNTP) Parameters" registry:        +----------+----------------------------------+-----------+        | Label    | Meaning                          | Reference |        +----------+----------------------------------+-----------+        | COMPRESS | Supported compression algorithms |RFC 8054  |        +----------+----------------------------------+-----------+Murchison & Elie             Standards Track                   [Page 19]

RFC 8054             NNTP Extension for Compression         January 20179.  References9.1.  Normative References   [RFC1951]  Deutsch, P., "DEFLATE Compressed Data Format Specification              version 1.3",RFC 1951, DOI 10.17487/RFC1951, May 1996,              <http://www.rfc-editor.org/info/rfc1951>.   [RFC2119]  Bradner, S., "Key words for use in RFCs to Indicate              Requirement Levels",BCP 14,RFC 2119,              DOI 10.17487/RFC2119, March 1997,              <http://www.rfc-editor.org/info/rfc2119>.   [RFC3977]  Feather, C., "Network News Transfer Protocol (NNTP)",RFC 3977, DOI 10.17487/RFC3977, October 2006,              <http://www.rfc-editor.org/info/rfc3977>.   [RFC5226]  Narten, T. and H. Alvestrand, "Guidelines for Writing an              IANA Considerations Section in RFCs",BCP 26,RFC 5226,              DOI 10.17487/RFC5226, May 2008,              <http://www.rfc-editor.org/info/rfc5226>.   [RFC5234]  Crocker, D., Ed. and P. Overell, "Augmented BNF for Syntax              Specifications: ABNF", STD 68,RFC 5234,              DOI 10.17487/RFC5234, January 2008,              <http://www.rfc-editor.org/info/rfc5234>.   [RFC7405]  Kyzivat, P., "Case-Sensitive String Support in ABNF",RFC 7405, DOI 10.17487/RFC7405, December 2014,              <http://www.rfc-editor.org/info/rfc7405>.9.2.  Informative References   [CRIME]    Rizzo, J. and T. Duong, "The CRIME Attack", Ekoparty              Security Conference, 2012.   [IEEE.1003.1-2008]              IEEE, "Information Technology - Portable Operating System              Interface (POSIX(R))", IEEE Standard 1003.1-2008,              DOI 10.1109/IEEESTD.2016.7582338, 2008,              <https://standards.ieee.org/findstds/standard/1003.1-2008.html>.   [MNP]      Held, G., "The Complete Modem Reference", Second              Edition, John Wiley & Sons, Inc., May 1994.Murchison & Elie             Standards Track                   [Page 20]

RFC 8054             NNTP Extension for Compression         January 2017   [RFC1962]  Rand, D., "The PPP Compression Control Protocol (CCP)",RFC 1962, DOI 10.17487/RFC1962, June 1996,              <http://www.rfc-editor.org/info/rfc1962>.   [RFC3749]  Hollenbeck, S., "Transport Layer Security Protocol              Compression Methods",RFC 3749, DOI 10.17487/RFC3749, May              2004, <http://www.rfc-editor.org/info/rfc3749>.   [RFC4422]  Melnikov, A., Ed. and K. Zeilenga, Ed., "Simple              Authentication and Security Layer (SASL)",RFC 4422,              DOI 10.17487/RFC4422, June 2006,              <http://www.rfc-editor.org/info/rfc4422>.   [RFC4642]  Murchison, K., Vinocur, J., and C. Newman, "Using              Transport Layer Security (TLS) with Network News Transfer              Protocol (NNTP)",RFC 4642, DOI 10.17487/RFC4642, October              2006, <http://www.rfc-editor.org/info/rfc4642>.   [RFC4643]  Vinocur, J. and K. Murchison, "Network News Transfer              Protocol (NNTP) Extension for Authentication",RFC 4643,              DOI 10.17487/RFC4643, October 2006,              <http://www.rfc-editor.org/info/rfc4643>.   [RFC4644]  Vinocur, J. and K. Murchison, "Network News Transfer              Protocol (NNTP) Extension for Streaming Feeds",RFC 4644,              DOI 10.17487/RFC4644, October 2006,              <http://www.rfc-editor.org/info/rfc4644>.   [RFC4648]  Josefsson, S., "The Base16, Base32, and Base64 Data              Encodings",RFC 4648, DOI 10.17487/RFC4648, October 2006,              <http://www.rfc-editor.org/info/rfc4648>.   [RFC4978]  Gulbrandsen, A., "The IMAP COMPRESS Extension",RFC 4978,              DOI 10.17487/RFC4978, August 2007,              <http://www.rfc-editor.org/info/rfc4978>.   [RFC5246]  Dierks, T. and E. Rescorla, "The Transport Layer Security              (TLS) Protocol Version 1.2",RFC 5246,              DOI 10.17487/RFC5246, August 2008,              <http://www.rfc-editor.org/info/rfc5246>.   [RFC7457]  Sheffer, Y., Holz, R., and P. Saint-Andre, "Summarizing              Known Attacks on Transport Layer Security (TLS) and              Datagram TLS (DTLS)",RFC 7457, DOI 10.17487/RFC7457,              February 2015, <http://www.rfc-editor.org/info/rfc7457>.Murchison & Elie             Standards Track                   [Page 21]

RFC 8054             NNTP Extension for Compression         January 2017   [RFC7525]  Sheffer, Y., Holz, R., and P. Saint-Andre,              "Recommendations for Secure Use of Transport Layer              Security (TLS) and Datagram Transport Layer Security              (DTLS)",BCP 195,RFC 7525, DOI 10.17487/RFC7525, May              2015, <http://www.rfc-editor.org/info/rfc7525>.   [V42bis]   International Telecommunications Union, "Data compression              procedures for data circuit-terminating equipment (DCE)              using error correction procedures", ITU-T              Recommendation V.42bis, January 1990,              <http://www.itu.int/rec/T-REC-V.42bis>.   [yEnc]     Helbing, J., "yEnc - Efficient encoding for Usenet and              eMail", March 2002, <http://www.yenc.org/>.Acknowledgments   This document draws heavily on ideas in [RFC4978] by Arnt   Gulbrandsen; a large portion of this text was borrowed from that   specification.   The authors would like to thank the following individuals for   contributing their ideas and reviewing this specification: Mark   Adler, Russ Allbery, Stephane Bortzmeyer, Francis Dupont, Angel   Gonzalez, Barry Leiba, John Levine, and Brian Peterson.   Special thanks to our Document Shepherd, Michael Baeuerle, who   significantly helped to increase the quality of this specification,   and to Stephen Farrell for his encouragement to pursue the efforts in   standardizing this NNTP extension.   Many thanks to the Responsible Area Director, Alexey Melnikov, for   reviewing and sponsoring this document.Murchison & Elie             Standards Track                   [Page 22]

RFC 8054             NNTP Extension for Compression         January 2017Authors' Addresses   Kenneth Murchison   Carnegie Mellon University   5000 Forbes Avenue   Pittsburgh, PA  15213   United States of America   Phone: +1 412 268 1982   Email: murch@andrew.cmu.edu   Julien Elie   10 allee Clovis   Noisy-le-Grand  93160   France   Email: julien@trigofacile.com   URI:http://www.trigofacile.com/Murchison & Elie             Standards Track                   [Page 23]

[8]ページ先頭

©2009-2025 Movatter.jp