Movatterモバイル変換

Network Working Group                                         R.  BradenRequest for Comment: 468                                        UCLA/CCNNIC: 14742                                                 March 8, 1973FTP DATA COMPRESSIONI.  INTRODUCTIONAPOLOGIA   Major design objectives of the proposed File Transfer Protocol (FTP)   are reliability and efficiency for transmission of large files.   Efficiency has two faces: efficiency of the host CPU's, and efficient   use of the Network bandwidth.  Block mode is intended to minimize CPU   overhead for bandwidth efficiency, there is a mode called "HASP" inRFC 454.  The "HASP" mode of FTP is really transmission with data   compression, i.e., an encoding scheme to reduce the information   redundancy in the messages.RFC 454 contains no explicit definition of the "HASP" or compressed   mode, but instead notes that a future RFC by yours truly will define   the mode.  Students of FTP may find this scarcely credible, but you   are now reading the promised RFC.  It turned out to be much farther   in the future than any of us expected.  Mea Culpa.GENERAL CONSIDERATIONS   In the early years of the Network, its major uses have been remote   terminal interactions and the small-to-medium-sized file transmission   typical of remote job entry.  As facilities such as the Illiac IV and   the Data Machine become operational on the Network, and the Network   community begins to include users with heavy data transmission   requirements, large file transmission will become a major mode of   Network use.  For example, one user of CCN expects to send 2 x 10**8   bits of data _each_ _day_ over the Network.   Local byte compression of the type proposed here is particular   effective for reducing the size of "printer" files such as those   transmitted under the Network RJE protocol.  Experience with CCN's   RJS service has shown a typical compression of print files by a   factor of between two and three.  Since FTP was intended to contain   the data transfer part of Network RJE protocol as a subset, it is   appropriate to include a print file compression mechanism in FTP.   These considerations led the FTP committee to include a compressed   mode within FTP.Braden                                                          [Page 1]

RFC 468                   FTP Data Compression                March 1973   The two main arguments for data compression are economics and   convenience (usability).  Consider first economics, which is   essentially a trade-off between CPU time and transmission costs.  Of   course, as long as Network use is a free commodity, the economics of   data compression are all bad.  That happy state won't last forever.   What does data compression cost?   Let us consider only simple linear compression schemes, such as the   one proposed here.  By linear, I mean that the CPU time to examine a   source record is proportional to number of bytes in the record.  A   simple linear scheme could detect repeated single characters, for   example.  One could imagine quadratic schemes, which detected   repeated substrings; but except for possible special circumstance   where the source stings have some structure known to the compression   algorithm, the CPU economics don't favor quadratic compression.   Assuming a reasonable figure for large-scale CPU costs in the   generation of CCN's 360/91, we concluded that an upper bound on CPU   costs for total compression and decompression would be 5 cents per   megabit; this is based on very loose coding of a simple linear   algorithm.  This may be compared with the projected Network   transmission costs of over 30 cents per megabit (possibly a lot   over).   Thus, the CPU time to conserve bandwidth costs significantly less   than the bandwidth saved.  Both CPU costs and bandwidth costs are   trending downward, but it seems exceedingly unlikely that the ratio   of CPU cost to bandwidth cost for linear compression will reverse in   the next few years.  On the other hand, this calculation clearly   discourages one from using quadratic compression.WHY HASP   CCN's batch remote job entry protocol NETRJS (see RFC #189, July 15,   1971) was designed to include two data transfer modes, truncated and   compressed.  The NETRJS truncated mode is essentially identical to   current FTP block mode record structure (except for minor bit format   differences).  The compressed mode of NETRJS uses an adaptation of   the particular compression scheme which is incorporated in the   "Multileaving protocol" of the binary synchronous rje support in   IBM's HASP system.   Although it isn't really necessary for the purpose of defining a   compression scheme in FTP, I have included an appendix summarizing   very briefly the nature of HASP and its rje package.  That appendix   may be considered cultural enrichment for those in the Network   Community who have been denied the privilege of being an IBM   customer.  After all, I know a lot of HASP experts who never heard ofBraden                                                          [Page 2]

RFC 468                   FTP Data Compression                March 1973   TENEX! More seriously, because HASP is widely used on IBM machines,   the HASP compression scheme is also widely used.  In designing   NETRJS, we chose the HASP scheme of compression because of its   ubiquity and plausibility.   However, certain details of the HASP bit formats are inappropriate or   sub-optimal for FTP.  Therefore, our proposal for compressed mode of   FTP is only an adaptation of the HASP compression scheme.   It should be clear fromAppendix A that the compression scheme of   HASP, even if used literally, is a very minor and incidental part of   that system.  Although we ought to properly credit the intellectual   origin of FTP's compressed mode, it seems a little strange to call   the compressed mode in FTP the "HASP mode".  I trust this will be   rectified by the forthcoming FTP meeting.II.  PROPOSED FTP COMPRESSED DATA MODE   Byte size is B bits.  Figures above boxes are field lengths in bits.                                  n bytes of data                               /--------/\--------\              1    B-1        /   B              B \             +---+------+    +--------+     +--------+Byte String: | 0 |  n   |    |   d    |. . .|   d    |             |   |      |    |    1   |     |    n   |             +---+------+    +--------+     +--------+                  String of n data bytes d(1),...,d(n)                  Count n must be positive                     2     B-2            B                   +----+------+    +---------+Replicated Byte:   | 1 0|   n  |    |    d    |                   +----+------+    +---------+                 String consisting of n replications of the data byte d                     2    B-2                  +----+------+Filler String:    | 1 1|   n  |                  +----+------+                 String of n filler bytes.  The filler byte is a "space"                 character for ASCII or EBCDIC type, or a binary zero                 byte for Image or Local Byte Type.                                B            B                          +----------+ +----------+Control Escape Sequence:  | 0......0 | |      C   |    (see below)                          +----------+ +----------+Braden                                                          [Page 3]

RFC 468                   FTP Data Compression                March 1973   The control byte "C" which is the second byte of a control escape   sequence is to have the same coding as the descriptor byte in Block   Mode.  This includes end-of-file and end-of-record indications.  I   will not specify this further because there is some question at   present about the exact coding of the Block Mode descriptor byte.   Following the example of APL*, we have let the meaning of the filler   (blank or 0) be determined by the type: character (ASCII|EBCDIC) vs.   binary (Image|Local Byte).  If byte size is equal to the word size of   the transmitting host, the compressed mode allows one to send sparse   notices with reasonable efficiency.   * Compare 1 (take) 0 1\`A' with 1 (take) 0 1\2Braden                                                          [Page 4]

RFC 468                   FTP Data Compression                March 1973APPENDIX A: HASP MULTILEAVING   HASP (Houston Automatic Spooling Program) is a subsystem which   essentially runs within OS/360 as a job but takes over the batch   processing management functions from the operating system.  That is,   HASP handles spooling of card input and printer and punch output,   queueing and scheduling of job execution, and the operator control   interface.  It is a tightly-written and efficient system for running   a large and varied job load through a large-scale machine.  The name   results from the historical fact that HASP was originally by a local   IBM group for one particular customer, NASA Houston.   HASP has always been an anomaly in the IBM scheme of things.  The   system was written around 1965 by two programmers; the HASP group has   probably averaged three programmers during most of its life.  The   leader of the group has been "Mr. HASP", Tom Simpson.  The HASP   system spread rapidly through (more or less) underground channels to   many of the medium and large scale 360's.  At least once, only   intense customer pressure prevented IBM from killing the HASP effort.   HASP generated an astonishing emotional mystique among its users.   The HASP sessions at SHARE Meetings were reminiscent of revival   meetings.  For years every SHARE Meeting has included HASP song   sessions around the piano during the nightly open bar.  HASP forms a   fascinating chapter in the history of IBM's large machine business.   The core concepts in HASP are pseudo-devices, and the general   technique of intercepting supervisor calls to augment operating   system functions without changing the operating system itself.  A   generation of OS/360 system programmers learned these techniques from   HASP.  (These important techniques are hardly ever described in the   literature, and "practical" programmers don't read the literature   anyway).   When HASP starts up (in supervisor state), it overlays an instruction   in the I/O Supervisor with a branch to its own code.  A user program   is written as if it were doing real I/O to card readers and printers.   HASP intercepts and interprets these I/O operations to handle job I/O   in a manner transparent to OS/360.  It similarly intercepts and   interprets operator console I/O.   HASP includes batch remote job entry using binary synchronous   communication.  The HASP communication protocol and message formats   use a scheme developed by Simpson's group called "Multileaving   Protocol".  The HASP rje system, by far the best rje package IBM has   produced, finally replaced two competitive IBM packages and has   effectively become the IBM standard for rje.  CCN's RJS system not   only adopted the Multileaving Protocol but essentially copied its   binary synchronous communication line handler directly form HASP.Braden                                                          [Page 5]

RFC 468                   FTP Data Compression                March 1973   The Multileaving Protocol is described in the HASP manual(1) as the   "fully synchronized, pseudo-simultaneous, bidirectional transmission   of a variable number of data streams between two or more computers   using binary synchronous communications facilities".  It allows a   remote batch terminal to operate a variable number of card readers   and printers simultaneously at different speeds over one   communication line.  It is not surprising that HASP Multileaving   contains in miniature many of the features of IMP-IMP Protocol and a   little host-host protocol.  Specifically, Multileaving includes the   following general features:      (1) "Conversational" transmission line protocol using transparency          (DLE STX, etc.).      (2) "Strong" error control and retransmission using a 16-bit CRC          and a modulo-16 block sequence number.      (3) Flow control for multiple streams in both directions.  This          includes the interchanging of matching control records          ("RFC's") to open a stream, and a set of flow control bits in          each block.  Each flow control bit is logically equivalent to          an ALLOcate command for one "message" (buffer) for a          particular stream.      (4) Optional Special Control Information for remote devices.  This          includes printer carriage control, switching card reader          hoppers, etc.      (5) Multiplexing ("multileaving") multiple streams into a single          block for transmission.      (6) Marking end of file and ends of records within each stream.      (7) Compressing transmitted text by encoding repeated blanks and          repeated single characters.Braden                                                          [Page 6]

RFC 468                   FTP Data Compression                March 1973   Finally, we have reached the (only) aspect of HASP relevant to FTP:   its compression scheme.  HASP uses the following encoding:                       8                  +---------+   End of Record: | 0 ... 0 |                  +---------+                    2     6             8              8                  +---+---------+   +-------+     +--------+   Data String:   |1 1|     N   |   |    d  | ... |   d    |                  |   |         |   |     1 |     |    N   |                  +---+---------+   +-------+     +--------+                         3      5                       +---+--------+   N Duplicate Blanks  |100|     N  |                       +---+--------+                               3       5           8                             +---+---------+  +---------+   N Replicated Characters D |101|    N    |  |    D    |                             +---+---------+  +---------+   HASP is concerned only with 8-bit bytes.  However, there is a   provision (which was never implemented) in the Multileaving Protocol   to set the unit of the counts N as 1 byte, 2 bytes, or 4 bytes.   Reference:   (1) HASP II System Manual, IBM Corporation (February 26, 1971)         [ This RFC was put into machine readable form for entry ]         [ into the online RFC archives by Via Genie         4/00]Braden                                                          [Page 7]