Movatterモバイル変換
[0]ホーム
[RFC Home] [TEXT|PDF|HTML] [Tracker] [IPR] [Errata] [Info page]
Obsoleted by:4648 INFORMATIONAL
Errata ExistNetwork Working Group S. Josefsson, Ed.Request for Comments: 3548 July 2003Category: InformationalThe Base16, Base32, and Base64 Data EncodingsStatus of this Memo This memo provides information for the Internet community. It does not specify an Internet standard of any kind. Distribution of this memo is unlimited.Copyright Notice Copyright (C) The Internet Society (2003). All Rights Reserved.Abstract This document describes the commonly used base 64, base 32, and base 16 encoding schemes. It also discusses the use of line-feeds in encoded data, use of padding in encoded data, use of non-alphabet characters in encoded data, and use of different encoding alphabets.Table of Contents1. Introduction . . . . . . . . . . . . . . . . . . . . . . . . .22. Implementation discrepancies . . . . . . . . . . . . . . . . .22.1. Line feeds in encoded data . . . . . . . . . . . . . . .22.2. Padding of encoded data . . . . . . . . . . . . . . . .3 2.3. Interpretation of non-alphabet characters in encoded data . . . . . . . . . . . . . . . . . . . . . . . . . .32.4. Choosing the alphabet . . . . . . . . . . . . . . . . .33. Base 64 Encoding . . . . . . . . . . . . . . . . . . . . . . .44. Base 64 Encoding with URL and Filename Safe Alphabet . . . . .65. Base 32 Encoding . . . . . . . . . . . . . . . . . . . . . . .66. Base 16 Encoding . . . . . . . . . . . . . . . . . . . . . . .87. Illustrations and examples . . . . . . . . . . . . . . . . . .98. Security Considerations . . . . . . . . . . . . . . . . . . .109. References . . . . . . . . . . . . . . . . . . . . . . . . . .119.1. Normative References . . . . . . . . . . . . . . . . . .119.2. Informative References . . . . . . . . . . . . . . . . .1110. Acknowledgements . . . . . . . . . . . . . . . . . . . . . . .1111. Editor's Address . . . . . . . . . . . . . . . . . . . . . . .1212. Full Copyright Statement . . . . . . . . . . . . . . . . . . .13Josefsson Informational [Page 1]
RFC 3548 The Base16, Base32, and Base64 Data Encodings July 20031. Introduction Base encoding of data is used in many situations to store or transfer data in environments that, perhaps for legacy reasons, are restricted to only US-ASCII [9] data. Base encoding can also be used in new applications that do not have legacy restrictions, simply because it makes it possible to manipulate objects with text editors. In the past, different applications have had different requirements and thus sometimes implemented base encodings in slightly different ways. Today, protocol specifications sometimes use base encodings in general, and "base64" in particular, without a precise description or reference. MIME [3] is often used as a reference for base64 without considering the consequences for line-wrapping or non-alphabet characters. The purpose of this specification is to establish common alphabet and encoding considerations. This will hopefully reduce ambiguity in other documents, leading to better interoperability. The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT", "SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL" in this document are to be interpreted as described inRFC 2119 [1].2. Implementation discrepancies Here we discuss the discrepancies between base encoding implementations in the past, and where appropriate, mandate a specific recommended behavior for the future.2.1. Line feeds in encoded data MIME [3] is often used as a reference for base 64 encoding. However, MIME does not define "base 64" per se, but rather a "base 64 Content-Transfer-Encoding" for use within MIME. As such, MIME enforces a limit on line length of base 64 encoded data to 76 characters. MIME inherits the encoding from PEM [2] stating it is "virtually identical", however PEM uses a line length of 64 characters. The MIME and PEM limits are both due to limits within SMTP. Implementations MUST NOT not add line feeds to base encoded data unless the specification referring to this document explicitly directs base encoders to add line feeds after a specific number of characters.Josefsson Informational [Page 2]
RFC 3548 The Base16, Base32, and Base64 Data Encodings July 20032.2. Padding of encoded data In some circumstances, the use of padding ("=") in base encoded data is not required nor used. In the general case, when assumptions on size of transported data cannot be made, padding is required to yield correct decoded data. Implementations MUST include appropriate pad characters at the end of encoded data unless the specification referring to this document explicitly states otherwise.2.3. Interpretation of non-alphabet characters in encoded data Base encodings use a specific, reduced, alphabet to encode binary data. Non alphabet characters could exist within base encoded data, caused by data corruption or by design. Non alphabet characters may be exploited as a "covert channel", where non-protocol data can be sent for nefarious purposes. Non alphabet characters might also be sent in order to exploit implementation errors leading to, e.g., buffer overflow attacks. Implementations MUST reject the encoding if it contains characters outside the base alphabet when interpreting base encoded data, unless the specification referring to this document explicitly states otherwise. Such specifications may, as MIME does, instead state that characters outside the base encoding alphabet should simply be ignored when interpreting data ("be liberal in what you accept"). Note that this means that any CRLF constitute "non alphabet characters" and are ignored. Furthermore, such specifications may consider the pad character, "=", as not part of the base alphabet until the end of the string. If more than the allowed number of pad characters are found at the end of the string, e.g., a base 64 string terminated with "===", the excess pad characters could be ignored.2.4. Choosing the alphabet Different applications have different requirements on the characters in the alphabet. Here are a few requirements that determine which alphabet should be used: o Handled by humans. Characters "0", "O" are easily interchanged, as well "1", "l" and "I". In the base32 alphabet below, where 0 (zero) and 1 (one) is not present, a decoder may interpret 0 as O, and 1 as I or L depending on case. (However, by default it should not, see previous section.)Josefsson Informational [Page 3]
RFC 3548 The Base16, Base32, and Base64 Data Encodings July 2003 o Encoded into structures that place other requirements. For base 16 and base 32, this determines the use of upper- or lowercase alphabets. For base 64, the non-alphanumeric characters (in particular "/") may be problematic in file names and URLs. o Used as identifiers. Certain characters, notably "+" and "/" in the base 64 alphabet, are treated as word-breaks by legacy text search/index tools. There is no universally accepted alphabet that fulfills all the requirements. In this document, we document and name some currently used alphabets.3. Base 64 Encoding The following description of base 64 is due to [2], [3], [4] and [5]. The Base 64 encoding is designed to represent arbitrary sequences of octets in a form that requires case sensitivity but need not be humanly readable. A 65-character subset of US-ASCII is used, enabling 6 bits to be represented per printable character. (The extra 65th character, "=", is used to signify a special processing function.) The encoding process represents 24-bit groups of input bits as output strings of 4 encoded characters. Proceeding from left to right, a 24-bit input group is formed by concatenating 3 8-bit input groups. These 24 bits are then treated as 4 concatenated 6-bit groups, each of which is translated into a single digit in the base 64 alphabet. Each 6-bit group is used as an index into an array of 64 printable characters. The character referenced by the index is placed in the output string.Josefsson Informational [Page 4]
RFC 3548 The Base16, Base32, and Base64 Data Encodings July 2003 Table 1: The Base 64 Alphabet Value Encoding Value Encoding Value Encoding Value Encoding 0 A 17 R 34 i 51 z 1 B 18 S 35 j 52 0 2 C 19 T 36 k 53 1 3 D 20 U 37 l 54 2 4 E 21 V 38 m 55 3 5 F 22 W 39 n 56 4 6 G 23 X 40 o 57 5 7 H 24 Y 41 p 58 6 8 I 25 Z 42 q 59 7 9 J 26 a 43 r 60 8 10 K 27 b 44 s 61 9 11 L 28 c 45 t 62 + 12 M 29 d 46 u 63 / 13 N 30 e 47 v 14 O 31 f 48 w (pad) = 15 P 32 g 49 x 16 Q 33 h 50 y Special processing is performed if fewer than 24 bits are available at the end of the data being encoded. A full encoding quantum is always completed at the end of a quantity. When fewer than 24 input bits are available in an input group, zero bits are added (on the right) to form an integral number of 6-bit groups. Padding at the end of the data is performed using the '=' character. Since all base 64 input is an integral number of octets, only the following cases can arise: (1) the final quantum of encoding input is an integral multiple of 24 bits; here, the final unit of encoded output will be an integral multiple of 4 characters with no "=" padding, (2) the final quantum of encoding input is exactly 8 bits; here, the final unit of encoded output will be two characters followed by two "=" padding characters, or (3) the final quantum of encoding input is exactly 16 bits; here, the final unit of encoded output will be three characters followed by one "=" padding character.Josefsson Informational [Page 5]
RFC 3548 The Base16, Base32, and Base64 Data Encodings July 20034. Base 64 Encoding with URL and Filename Safe Alphabet The Base 64 encoding with an URL and filename safe alphabet has been used in [8]. An alternative alphabet has been suggested that used "~" as the 63rd character. Since the "~" character has special meaning in some file system environments, the encoding described in this section is recommended instead. This encoding should not be regarded as the same as the "base64" encoding, and should not be referred to as only "base64". Unless made clear, "base64" refer to the base 64 in the previous section. This encoding is technically identical to the previous one, except for the 62:nd and 63:rd alphabet character, as indicated in table 2. Table 2: The "URL and Filename safe" Base 64 Alphabet Value Encoding Value Encoding Value Encoding Value Encoding 0 A 17 R 34 i 51 z 1 B 18 S 35 j 52 0 2 C 19 T 36 k 53 1 3 D 20 U 37 l 54 2 4 E 21 V 38 m 55 3 5 F 22 W 39 n 56 4 6 G 23 X 40 o 57 5 7 H 24 Y 41 p 58 6 8 I 25 Z 42 q 59 7 9 J 26 a 43 r 60 8 10 K 27 b 44 s 61 9 11 L 28 c 45 t 62 - (minus) 12 M 29 d 46 u 63 _ (understrike) 13 N 30 e 47 v 14 O 31 f 48 w (pad) = 15 P 32 g 49 x 16 Q 33 h 50 y5. Base 32 Encoding The following description of base 32 is due to [7] (with corrections). The Base 32 encoding is designed to represent arbitrary sequences of octets in a form that needs to be case insensitive but need not be humanly readable.Josefsson Informational [Page 6]
RFC 3548 The Base16, Base32, and Base64 Data Encodings July 2003 A 33-character subset of US-ASCII is used, enabling 5 bits to be represented per printable character. (The extra 33rd character, "=", is used to signify a special processing function.) The encoding process represents 40-bit groups of input bits as output strings of 8 encoded characters. Proceeding from left to right, a 40-bit input group is formed by concatenating 5 8bit input groups. These 40 bits are then treated as 8 concatenated 5-bit groups, each of which is translated into a single digit in the base 32 alphabet. When encoding a bit stream via the base 32 encoding, the bit stream must be presumed to be ordered with the most-significant-bit first. That is, the first bit in the stream will be the high-order bit in the first 8bit byte, and the eighth bit will be the low-order bit in the first 8bit byte, and so on. Each 5-bit group is used as an index into an array of 32 printable characters. The character referenced by the index is placed in the output string. These characters, identified in Table 2, below, are selected from US-ASCII digits and uppercase letters. Table 3: The Base 32 Alphabet Value Encoding Value Encoding Value Encoding Value Encoding 0 A 9 J 18 S 27 3 1 B 10 K 19 T 28 4 2 C 11 L 20 U 29 5 3 D 12 M 21 V 30 6 4 E 13 N 22 W 31 7 5 F 14 O 23 X 6 G 15 P 24 Y (pad) = 7 H 16 Q 25 Z 8 I 17 R 26 2 Special processing is performed if fewer than 40 bits are available at the end of the data being encoded. A full encoding quantum is always completed at the end of a body. When fewer than 40 input bits are available in an input group, zero bits are added (on the right) to form an integral number of 5-bit groups. Padding at the end of the data is performed using the "=" character. Since all base 32 input is an integral number of octets, only the following cases can arise: (1) the final quantum of encoding input is an integral multiple of 40 bits; here, the final unit of encoded output will be an integral multiple of 8 characters with no "=" padding,Josefsson Informational [Page 7]
RFC 3548 The Base16, Base32, and Base64 Data Encodings July 2003 (2) the final quantum of encoding input is exactly 8 bits; here, the final unit of encoded output will be two characters followed by six "=" padding characters, (3) the final quantum of encoding input is exactly 16 bits; here, the final unit of encoded output will be four characters followed by four "=" padding characters, (4) the final quantum of encoding input is exactly 24 bits; here, the final unit of encoded output will be five characters followed by three "=" padding characters, or (5) the final quantum of encoding input is exactly 32 bits; here, the final unit of encoded output will be seven characters followed by one "=" padding character.6. Base 16 Encoding The following description is original but analogous to previous descriptions. Essentially, Base 16 encoding is the standard standard case insensitive hex encoding, and may be referred to as "base16" or "hex". A 16-character subset of US-ASCII is used, enabling 4 bits to be represented per printable character. The encoding process represents 8-bit groups (octets) of input bits as output strings of 2 encoded characters. Proceeding from left to right, a 8-bit input is taken from the input data. These 8 bits are then treated as 2 concatenated 4-bit groups, each of which is translated into a single digit in the base 16 alphabet. Each 4-bit group is used as an index into an array of 16 printable characters. The character referenced by the index is placed in the output string. Table 5: The Base 16 Alphabet Value Encoding Value Encoding Value Encoding Value Encoding 0 0 4 4 8 8 12 C 1 1 5 5 9 9 13 D 2 2 6 6 10 A 14 E 3 3 7 7 11 B 15 F Unlike base 32 and base 64, no special padding is necessary since a full code word is always available.Josefsson Informational [Page 8]
RFC 3548 The Base16, Base32, and Base64 Data Encodings July 20037. Illustrations and examples To translate between binary and a base encoding, the input is stored in a structure and the output is extracted. The case for base 64 is displayed in the following figure, borrowed from [4]. +--first octet--+-second octet--+--third octet--+ |7 6 5 4 3 2 1 0|7 6 5 4 3 2 1 0|7 6 5 4 3 2 1 0| +-----------+---+-------+-------+---+-----------+ |5 4 3 2 1 0|5 4 3 2 1 0|5 4 3 2 1 0|5 4 3 2 1 0| +--1.index--+--2.index--+--3.index--+--4.index--+ The case for base 32 is shown in the following figure, borrowed from [6]. Each successive character in a base-32 value represents 5 successive bits of the underlying octet sequence. Thus, each group of 8 characters represents a sequence of 5 octets (40 bits). 1 2 3 01234567 89012345 67890123 45678901 23456789 +--------+--------+--------+--------+--------+ |< 1 >< 2| >< 3 ><|.4 >< 5.|>< 6 ><.|7 >< 8 >| +--------+--------+--------+--------+--------+ <===> 8th character <====> 7th character <===> 6th character <====> 5th character <====> 4th character <===> 3rd character <====> 2nd character <===> 1st characterJosefsson Informational [Page 9]
RFC 3548 The Base16, Base32, and Base64 Data Encodings July 2003 The following example of Base64 data is from [4]. Input data: 0x14fb9c03d97e Hex: 1 4 f b 9 c | 0 3 d 9 7 e 8-bit: 00010100 11111011 10011100 | 00000011 11011001 11111110 6-bit: 000101 001111 101110 011100 | 000000 111101 100111 111110 Decimal: 5 15 46 28 0 61 37 62 Output: F P u c A 9 l + Input data: 0x14fb9c03d9 Hex: 1 4 f b 9 c | 0 3 d 9 8-bit: 00010100 11111011 10011100 | 00000011 11011001 pad with 00 6-bit: 000101 001111 101110 011100 | 000000 111101 100100 Decimal: 5 15 46 28 0 61 36 pad with = Output: F P u c A 9 k = Input data: 0x14fb9c03 Hex: 1 4 f b 9 c | 0 3 8-bit: 00010100 11111011 10011100 | 00000011 pad with 0000 6-bit: 000101 001111 101110 011100 | 000000 110000 Decimal: 5 15 46 28 0 48 pad with = = Output: F P u c A w = =8. Security Considerations When implementing Base encoding and decoding, care should be taken not to introduce vulnerabilities to buffer overflow attacks, or other attacks on the implementation. A decoder should not break on invalid input including, e.g., embedded NUL characters (ASCII 0). If non-alphabet characters are ignored, instead of causing rejection of the entire encoding (as recommended), a covert channel that can be used to "leak" information is made possible. The implications of this should be understood in applications that do not follow the recommended practice. Similarly, when the base 16 and base 32 alphabets are handled case insensitively, alteration of case can be used to leak information. Base encoding visually hides otherwise easily recognized information, such as passwords, but does not provide any computational confidentiality. This has been known to cause security incidents when, e.g., a user reports details of a network protocol exchangeJosefsson Informational [Page 10]
RFC 3548 The Base16, Base32, and Base64 Data Encodings July 2003 (perhaps to illustrate some other problem) and accidentally reveals the password because she is unaware that the base encoding does not protect the password.9. References9.1. Normative References [1] Bradner, S., "Key words for use in RFCs to Indicate Requirement Levels",BCP 14,RFC 2119, March 1997.9.2. Informative References [2] Linn, J., "Privacy Enhancement for Internet Electronic Mail: Part I: Message Encryption and Authentication Procedures",RFC1421, February 1993. [3] Freed, N. and N. Borenstein, "Multipurpose Internet Mail Extensions (MIME) Part One: Format of Internet Message Bodies",RFC 2045, November 1996. [4] Callas, J., Donnerhacke, L., Finney, H. and R. Thayer, "OpenPGP Message Format",RFC 2440, November 1998. [5] Eastlake, D., "Domain Name System Security Extensions",RFC 2535, March 1999. [6] Klyne, G. and L. Masinter, "Identifying Composite Media Features",RFC 2938, September 2000. [7] Myers, J.,"SASL GSSAPI mechanisms", Work in Progress. [8] Wilcox-O'Hearn, B., "Post to P2P-hackers mailing list", World Wide Webhttp://zgp.org/pipermail/p2p-hackers/2001-September/000315.html, September 2001. [9] Cerf, V., "ASCII format for Network Interchange",RFC 20, October 1969.10. Acknowledgements Several people offered comments and suggestions, including Tony Hansen, Gordon Mohr, John Myers, Chris Newman, and Andrew Sieber. Text used in this document is based on earlier RFCs describing specific uses of various base encodings. The author acknowledges the RSA Laboratories for supporting the work that led to this document.Josefsson Informational [Page 11]
RFC 3548 The Base16, Base32, and Base64 Data Encodings July 200311. Editor's Address Simon Josefsson EMail: simon@josefsson.orgJosefsson Informational [Page 12]
RFC 3548 The Base16, Base32, and Base64 Data Encodings July 200312. Full Copyright Statement Copyright (C) The Internet Society (2003). All Rights Reserved. This document and translations of it may be copied and furnished to others, and derivative works that comment on or otherwise explain it or assist in its implementation may be prepared, copied, published and distributed, in whole or in part, without restriction of any kind, provided that the above copyright notice and this paragraph are included on all such copies and derivative works. However, this document itself may not be modified in any way, such as by removing the copyright notice or references to the Internet Society or other Internet organizations, except as needed for the purpose of developing Internet standards in which case the procedures for copyrights defined in the Internet Standards process must be followed, or as required to translate it into languages other than English. The limited permissions granted above are perpetual and will not be revoked by the Internet Society or its successors or assignees. This document and the information contained herein is provided on an "AS IS" basis and THE INTERNET SOCIETY AND THE INTERNET ENGINEERING TASK FORCE DISCLAIMS ALL WARRANTIES, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO ANY WARRANTY THAT THE USE OF THE INFORMATION HEREIN WILL NOT INFRINGE ANY RIGHTS OR ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.Acknowledgement Funding for the RFC Editor function is currently provided by the Internet Society.Josefsson Informational [Page 13]
[8]ページ先頭