Movatterモバイル変換


[0]ホーム

URL:


[RFC Home] [TEXT|PDF|HTML] [Tracker] [IPR] [Info page]

INFORMATIONAL
Network Working Group                                        B. CallaghanRequest for Comments: 2224                         Sun Microsystems, Inc.Category: Informational                                      October 1997NFS URL SchemeStatus of this Memo   This memo provides information for the Internet community.  It does   not specify an Internet standard of any kind.  Distribution of this   memo is unlimited.Copyright Notice   Copyright (C) The Internet Society (1997).  All Rights Reserved.Abstract   A new URL scheme, 'nfs' is defined.  It is used to refer to files and   directories on NFS servers using the general URL syntax defined inRFC 1738, "Uniform Resource Locators (URL)".   This scheme uses the public filehandle and multi-component lookup   [RFC2054,RFC2055] to access server data with a minimum of protocol   overhead.   The NFS protocol provides access to shared filesystems across   networks.  It is designed to be machine, operating system, network   architecture, and transport protocol independent.  The protocol   currently exists in two versions: version 2 [RFC1094] and version 3   [RFC1813], both built on ONC RPC [RFC1831] at its associated eXternal   Data Representation (XDR) [RFC1832] and Binding Protocol [RFC1833].Table of Contents1.    URL Syntax . . . . . . . . . . . . . . . . . . . . . . .22.    URL Evaluation . . . . . . . . . . . . . . . . . . . . .23.    Server Connection  . . . . . . . . . . . . . . . . . . .24.    NFS Version  . . . . . . . . . . . . . . . . . . . . . .25.    Public Filehandle  . . . . . . . . . . . . . . . . . . .35.1     NFS Version 2 Public Filehandle  . . . . . . . . . . .35.2     NFS Version 3 Public Filehandle  . . . . . . . . . . .36.    Multi-component Lookup . . . . . . . . . . . . . . . . .36.1     Absolute vs Relative Pathname  . . . . . . . . . . . .46.2     Symbolic Links . . . . . . . . . . . . . . . . . . . .57.    Mount Protocol . . . . . . . . . . . . . . . . . . . . .68.    Bibliography . . . . . . . . . . . . . . . . . . . . . .79.    Security Considerations  . . . . . . . . . . . . . . . .8Callaghan                    Informational                      [Page 1]

RFC 2224                     NFS URL Scheme                 October 199710.   BNF for NFS URL Scheme . . . . . . . . . . . . . . . . .911.   Acknowledgements . . . . . . . . . . . . . . . . . . . .1012.   Author's Address . . . . . . . . . . . . . . . . . . . .1013.   Full Copyright Statement . . . . . . . . . . . . . . . .111. URL Syntax   An NFS URL is based on the Common Internet Scheme Syntax described insection 3.1 of RFC 1738.  It has the general form:        nfs://<host>:<port><url-path>   The ":<port>" part is optional.  If omitted then port 2049 is   assumed.  The <url-path> is also optional.   The <url-path> is a hierarchical directory path of the form   /<directory>/<directory>/<directory>/.../<name>. The <url-path> must   consist only of characters within the US-ASCII character set.  Within   a <directory> or <name> component the character "/" is reserved and   must be encoded as described inSection 2.2 of RFC 1738.  If <url-   path> is omitted or consists solely of "/", it must default to the   path ".".2. URL Evaluation   A client must evaluate an NFS URL by a method known as WebNFS   [RFC2054,RFC2055]. This method provides easy passage through   firewalls and proxy servers, as well as using a minimum number of   messages.  The WebNFS method is defined for NFS versions 2 and 3. It   assumes that the server registers on TCP or UDP port 2049 and   supports the public filehandle and multi-component lookup semantics   as described in the following sections.3. Server Connection   The client must first attempt to create a TCP connection to <host>   using the <port> specified.  If :<port> is omitted, then port 2049   will be used.  If the server refuses the TCP connection, then the   client will use UDP.4. NFS Version   The client must first attempt to use NFS version 3.  If the server   returns an RPC PROG_MISMATCH error then the client must assume that   NFS version 3 is not supported, and retry the operation with an NFS   version 2 public filehandle.Callaghan                    Informational                      [Page 2]

RFC 2224                     NFS URL Scheme                 October 19975. Public Filehandle   NFS filehandles are normally created by the server and used to   identify uniquely a particular file or directory on the server.  The   client does not normally create filehandles or have any knowledge of   the contents of a filehandle.   The public filehandle is an an exception.  It is an NFS filehandle   with a reserved value and special semantics that allow an initial   filehandle to be obtained.  A WebNFS client uses the public   filehandle as an initial filehandle rather than using the MOUNT   protocol.  Since NFS version 2 and version 3 have different   filehandle formats, the public filehandle is defined differently for   each.   The public filehandle is a zero filehandle.  For NFS version 2 this   is a filehandle with 32 zero octets.  A version 3 public filehandle   has zero length.5.1 NFS Version 2 Public Filehandle   A version 2 filehandle is defined inRFC 1094 as an opaque value   occupying 32 octets.  A version 2 public filehandle has a zero in   each octet, i.e. all zeros.    1                                                             32   +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+   |0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|0|   +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+5.2 NFS Version 3 Public Filehandle   A version 3 filehandle is defined inRFC 1813 as a variable length   opaque value occupying up to 64 octets.  The length of the filehandle   is indicated by an integer value contained in a 4 octet value which   describes the number of valid octets that follow. A version 3 public   filehandle has a length of zero.   +-+-+-+-+   |   0   |   +-+-+-+-+6. Multi-component Lookup   Normally the NFS LOOKUP request (version 2 or 3) takes a directory   filehandle along with the name of a directory member, and returns the   filehandle of the directory member.  If a client needs to evaluate a   pathname that contains a sequence of components, then beginning withCallaghan                    Informational                      [Page 3]

RFC 2224                     NFS URL Scheme                 October 1997   the directory filehandle of the first component it must issue a   series of LOOKUP requests one component at a time.  For instance,   evaluation of the path  "a/b/c" will generate separate LOOKUP   requests for each component of the pathname "a", "b", and "c".   A LOOKUP request that uses the public filehandle can provide a   pathname containing multiple components.  The server is expected to   evaluate the entire pathname and return a filehandle for the final   component.   For example, rather than evaluate the path "a/b/c" as:        LOOKUP  FH=0x0  "a"  --->                             <---  FH=0x1        LOOKUP  FH=0x1  "b"  --->                             <---  FH=0x2        LOOKUP  FH=0x2  "c"  --->                             <---  FH=0x3   Relative to the public filehandle these three LOOKUP   requests can be replaced by a single multi-component   lookup:        LOOKUP  FH=0x0  "a/b/c"  --->                                 <---  FH=0x3   Multi-component lookup is supported only for LOOKUP requests relative   to the public filehandle.   The <url-path> of the NFS URL must be evaluated as a multi-component   lookup. This implies that the path components are delimited by   slashes and the characters that make up the path must be in the   printable US-ASCII character set. Characters not in the "unreserved"   set (see BNF description below) may be included in pathname   components but must be escaped.   If the <url-path> is empty or consists solely of "/", the client must   send a multi-component lookup for the pathname ".".6.1 Absolute vs. Relative Pathname   A multi-component pathname that begins with a slash character is   considered "absolute" and will be evaluated relative to the server's   root.  A pathname that does not begin with a slash is "relative" and   will be evaluated relative to the directory with which the public   filehandle is associated.Callaghan                    Informational                      [Page 4]

RFC 2224                     NFS URL Scheme                 October 1997   Note that the initial "/" that introduces the <url-path> of an NFS   URL must not be passed to the server for multi-component lookup since   the pathname is to be evaluated relative to the public filehandle   directory.  For example, if the public filehandle is associated with   the server's directory "/a/b/c" then the URL:        nfs://server/d/e/f   will be evaluated with a multi-component lookup of the path   "d/e/f" relative to the server's directory "/a/b/c" while   the URL:        nfs://server//a/b/c/d/e/f   will locate the same file with an absolute multi-component lookup of   the path "/a/b/c/d/e/f" relative to the server's filesystem root.   Notice that a double slash is required at the beginning of the path.   Not all WebNFS servers can support arbitrary use of absolute paths.   Clearly, the server must not return a filehandle if the path   identifies a file or directory that is not exported by the server.   In addition, some servers will not return a filehandle if the path   names a file or directory in an exported filesystem different from   the one that is associated with the public filehandle.6.2 Symbolic Links   The NFS protocol supports symbolic links, which are the filesystem   equivalent of a relative URL. If a WebNFS client retrieves a   filehandle for a symbolic link (as indicated by the file type   attribute) then it should send a READLINK request to the server to   retrieve the path comprising the symbolic link.   This path should then be combined with the URL which referenced the   symbolic link according to the rules described inRFC 1808.  If the   relative URL in the symbolic link text is to be resolved successfully   then it must contain only ASCII characters and conform to the syntax   described inRFC 1808.  Note that this allows a symbolic link to   contain an entire URL and it may specify a scheme that is not   necessarily an NFS URL.   A symbolic link path that begins with a slash will be evaluated as an   absolute path relative to the directory associated with the public   filehandle which may not be the same as the server's system root   directory.  If symbolic links with absolute paths are to be evaluated   correctly on both client and server then the public filehandle must   be associated with the system root directory.Callaghan                    Informational                      [Page 5]

RFC 2224                     NFS URL Scheme                 October 1997   For example, if the symbolic link is named by the URL        nfs://server/a/b   then the following examples show how a new URL can be   formed from the symbolic link text:         c                      = nfs://server/a/c         c/d                    = nfs://server/a/c/d         ../c                   = nfs://server/c         /c/d                   = nfs://server/c/d         nfs://server2/a/b      = nfs://server2/a/b7. Mount Protocol   The NFS URL may have limited use for naming files on servers that do   not support the public filehandle and multi-component lookup.   If the server returns an NFS3ERR_STALE, NFS3ERR_INVAL, or   NFS3ERR_BADHANDLE error in response to the client's use of a public   filehandle, then the client should attempt to resolve the <url-path>   to a filehandle using the MOUNT protocol.   Version 1 of the MOUNT protocol is described inAppendix A ofRFC1094 and version 3 inAppendix I of RFC 1813. Version 2 of the MOUNT   protocol is identical to version 1 except for the addition of a   procedure MOUNTPROC_PATHCONF which returns POSIX pathconf information   from the server.   Note that the pathname sent to the server in the MOUNTPROC_MNT   request is assumed to be a server native path, rather than a slash-   separated path described byRFC 1738.  Hence, the MOUNT protocol can   reasonably be expected to map a <url-path> to a filehandle only on   servers that support slash-separated ASCII native paths.  In general,   servers that do not support WebNFS access or slash-separated ASCII   native paths should not advertise NFS URLs.   At this point the client must already have some indication as to   which version of the NFS protocol is supported on the server.  Since   the filehandle format differs between NFS versions 2 and 3, the   client must select the appropriate version of the MOUNT protocol.   MOUNT versions 1 and 2 return only NFS version 2 filehandles, whereas   MOUNT version 3 returns NFS version 3 filehandles.Callaghan                    Informational                      [Page 6]

RFC 2224                     NFS URL Scheme                 October 1997   Unlike the NFS service, the MOUNT service is not registered on a   well-known port.  The client must use the PORTMAP service to locate   the server's MOUNT port before it can transmit a MOUNTPROC_MNT   request to retrieve the filehandle corresponding to the requested   path.       Client                                       Server       ------                                       ------       -------------- MOUNT port ? -------------->  Portmapper       <-------------- Port=984 ------------------       ------- Filehandle for /export/foo ?  ---->  Mountd @ port 984       <--------- Filehandle=0xf82455ce0..  ------   NFS servers commonly use a client's successful MOUNTPROC_MNT request   request as an indication that the client has "mounted" the filesystem   and may maintain this information in a file that lists the   filesystems that clients currently have mounted.  This information is   removed from the file when the client transmits an MOUNTPROC_UMNT   request.  Upon receiving a successful reply to a MOUNTPROC_MNT   request, a WebNFS client should send a MOUNTPROC_UMNT request to   prevent an accumulation of "mounted" records on the server.8.0 Bibliography   [RFC1738]       Berners-Lee, T., Masinter, L. and M. McCahill,                   "Uniform Resource Locators (URL),"RFC 1738,                   December 1994.   [RFC1808]       Fielding, R., "Relative Uniform Resource Locators,"RFC 1808, June 1995.   [RFC1831]       Srinivasan, R., "RPC: Remote Procedure Call                   Protocol Specification Version 2,"RFC 1831,                   August 1995.   [RFC1832]       Srinivasan, R., "XDR: External Data Representation                   Standard,"RFC 1832, August 1995.   [RFC1833]       Srinivasan, R., "Binding Protocols for ONC RPC                   Version 2,"RFC 1833, August 1995.   [RFC1094]       Sun Microsystems, Inc., "Network Filesystem                   Specification,"RFC 1094, March 1989.Callaghan                    Informational                      [Page 7]

RFC 2224                     NFS URL Scheme                 October 1997   [RFC1813]       Callaghan, B., Pawlowski, B. and P. Staubach,                   "NFS Version 3 Protocol Specification,"RFC 1813,                   June 1995.   [RFC2054]       Callaghan, B., "WebNFS Client Specification,"RFC 2054, October 1996.   [RFC2055]       Callaghan, B., "WebNFS Server Specification,"RFC 2055, October 1996.   [Sandberg]      Sandberg, R., D. Goldberg, S. Kleiman, D. Walsh,                   B.  Lyon, "Design and Implementation of the Sun                   Network Filesystem," USENIX Conference                   Proceedings, USENIX Association, Berkeley, CA,                   Summer 1985.  The basic paper describing the                   SunOS implementation of the NFS version 2                   protocol, and discusses the goals, protocol                   specification and trade-offs.   [X/OpenNFS]     X/Open Company, Ltd., X/Open CAE Specification:                   Protocols for X/Open Internetworking: XNFS,                   X/Open Company, Ltd., Apex Plaza, Forbury Road,                   Reading Berkshire, RG1 1AX, United Kingdom,                   1991.  This is an indispensable reference for                   the NFS and accompanying protocols, including                   the Lock Manager and the Portmapper.   [X/OpenPCNFS]   X/Open Company, Ltd., X/Open CAE Specification:                   Protocols for X/Open Internetworking: (PC)NFS,                   Developer's Specification, X/Open Company, Ltd.,                   Apex Plaza, Forbury Road, Reading Berkshire, RG1                   1AX, United Kingdom, 1991.  This is an                   indispensable reference for NFS protocol and                   accompanying protocols, including the Lock Manager                   and the Portmapper.9. Security Considerations   Since the WebNFS server features are based on NFS protocol versions 2   and 3, the RPC based security considerations described inRFC 1094,RFC 1831, andRFC 1832 apply here also.   Server implementors should be careful when implementing multi-   component lookup that the client cannot obtain unauthorized access to   files or directories. For example: a path that includes multiple   occurrences of "../" may locate a filesystem outside of the exported   filesystem associated with the public filehandle.Callaghan                    Informational                      [Page 8]

RFC 2224                     NFS URL Scheme                 October 1997   Clients and servers may separately negotiate secure connection   schemes for authentication, data integrity, and privacy.10. BNF for NFS URL Scheme   The syntax of the NFS URL is a subset of the Generic URL syntax   described inRFC 1738.  An NFS URL does not include user or password   components, nor does it recognize "?" query or "#" fragment   components.      nfsURL        = "nfs" ":" relativeURL      relativeURL   = net_path | abs_path | rel_path      net_path      = "//" hostport [ abs_path ]      abs_path      = "/"  rel_path      rel_path      = [ path_segments ]      hostport      = host [ ":" port ]      host          = hostname | hostnumber      hostname      = *( domainlabel "." ) toplabel      domainlabel   = alphanum | alphanum *( alphanum | "-" ) alphanum      toplabel      = alpha | alpha *( alphanum | "-" ) alphanum      hostnumber    = 1*digit "." 1*digit "." 1*digit "." 1*digit      port          = *digit      url-path      = [ "/" ] path_segments      path_segments = segment *( "/" segment )      segment       = *pchar      pchar         = unreserved | escaped | ":" | "@" | "&" | "=" | "+"      reserved      = ";" | "/" | "?" | ":" | "@" | "&" | "=" | "+"      unreserved    = alpha | digit | mark      mark          = "$" | "-" | "_" | "." | "!" | "~" |                      "*" | "'" | "(" | ")" | ","      escaped       = "%" hex hex      hex           = digit | "A" | "B" | "C" | "D" | "E" | "F" |                              "a" | "b" | "c" | "d" | "e" | "f"      alphanum      = alpha | digit      alpha         = lowalpha | upalpha      lowalpha = "a" | "b" | "c" | "d" | "e" | "f" | "g" | "h" | "i" |                 "j" | "k" | "l" | "m" | "n" | "o" | "p" | "q" | "r" |                 "s" | "t" | "u" | "v" | "w" | "x" | "y" | "z"      upalpha  = "A" | "B" | "C" | "D" | "E" | "F" | "G" | "H" | "I" |                 "J" | "K" | "L" | "M" | "N" | "O" | "P" | "Q" | "R" |                 "S" | "T" | "U" | "V" | "W" | "X" | "Y" | "Z"      digit    = "0" | "1" | "2" | "3" | "4" | "5" | "6" | "7" |                 "8" | "9"Callaghan                    Informational                      [Page 9]

RFC 2224                     NFS URL Scheme                 October 199711. Acknowledgements   This specification was extensively reviewed by the NFS group at   SunSoft and brainstormed by Michael Eisler.12. Author's Address   Address comments related to this RFC to:      brent@eng.sun.com   Brent Callaghan   Sun Microsystems, Inc.   Mailstop Mpk17-201,   901 San Antonio Road,   Palo Alto, California 94303   Phone: 1-415-786-5067   EMail: brent.callaghan@eng.sun.com   Fax:   1-415-786-5896Callaghan                    Informational                     [Page 10]

RFC 2224                     NFS URL Scheme                 October 199713.  Full Copyright Statement   Copyright (C) The Internet Society (1997).  All Rights Reserved.   This document and translations of it may be copied and furnished to   others, and derivative works that comment on or otherwise explain it   or assist in its implmentation may be prepared, copied, published   andand distributed, in whole or in part, without restriction of any   kind, provided that the above copyright notice and this paragraph are   included on all such copies and derivative works.  However, this   document itself may not be modified in any way, such as by removing   the copyright notice or references to the Internet Society or other   Internet organizations, except as needed for the purpose of   developing Internet standards in which case the procedures for   copyrights defined in the Internet Standards process must be   followed, or as required to translate it into languages other than   English.   The limited permissions granted above are perpetual and will not be   revoked by the Internet Society or its successors or assigns.   This document and the information contained herein is provided on an   "AS IS" basis and THE INTERNET SOCIETY AND THE INTERNET ENGINEERING   TASK FORCE DISCLAIMS ALL WARRANTIES, EXPRESS OR IMPLIED, INCLUDING   BUT NOT LIMITED TO ANY WARRANTY THAT THE USE OF THE INFORMATION   HEREIN WILL NOT INFRINGE ANY RIGHTS OR ANY IMPLIED WARRANTIES OF   MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE."Callaghan                    Informational                     [Page 11]

[8]ページ先頭

©2009-2025 Movatter.jp