Movatterモバイル変換
[0]ホーム
[RFC Home] [TEXT|PDF|HTML] [Tracker] [IPR] [Info page]
Obsoleted by:1658 PROPOSED STANDARD
Network Working Group B. Stewart, EditorRequest for Comments: 1316 Xyplex, Inc. April 1992Definitions of Managed Objectsfor Character Stream DevicesStatus of this Memo This RFC specifies an IAB standards track protocol for the Internet community, and requests discussion and suggestions for improvements. Please refer to the current edition of the "IAB Official Protocol Standards" for the standardization state and status of this protocol. Distribution of this memo is unlimited.1. Abstract This memo defines a portion of the Management Information Base (MIB) for use with network management protocols in TCP/IP based internets. In particular it defines objects for the management of character stream devices.2. The Network Management Framework The Internet-standard Network Management Framework consists of three components. They are:RFC 1155 which defines the SMI, the mechanisms used for describing and naming objects for the purpose of management.RFC 1212 defines a more concise description mechanism, which is wholly consistent with the SMI.RFC 1156 which defines MIB-I, the core set of managed objects for the Internet suite of protocols.RFC 1213, defines MIB-II, an evolution of MIB-I based on implementation experience and new operational requirements.RFC 1157 which defines the SNMP, the protocol used for network access to managed objects. The Framework permits new objects to be defined for the purpose of experimentation and evaluation.3. Objects Managed objects are accessed via a virtual information store, termed the Management Information Base or MIB. Objects in the MIB areCharacter MIB Working Group [Page 1]
RFC 1316 Character MIB April 1992 defined using the subset of Abstract Syntax Notation One (ASN.1) [7] defined in the SMI. In particular, each object has a name, a syntax, and an encoding. The name is an object identifier, an administratively assigned name, which specifies an object type. The object type together with an object instance serves to uniquely identify a specific instantiation of the object. For human convenience, we often use a textual string, termed the OBJECT DESCRIPTOR, to also refer to the object type. The syntax of an object type defines the abstract data structure corresponding to that object type. The ASN.1 language is used for this purpose. However, the SMI [3] purposely restricts the ASN.1 constructs which may be used. These restrictions are explicitly made for simplicity. The encoding of an object type is simply how that object type is represented using the object type's syntax. Implicitly tied to the notion of an object type's syntax and encoding is how the object type is represented when being transmitted on the network. The SMI specifies the use of the basic encoding rules of ASN.1 [8], subject to the additional requirements imposed by the SNMP.3.1. Format of DefinitionsSection 5 contains the specification of all object types contained in this MIB module. The object types are defined using the conventions defined in the SMI, as amended by the extensions specified in [9,10].4. Overview The Character MIB applies to interface ports that carry a character stream, whether physical or virtual, serial or parallel, synchronous or asynchronous. The most common example of a character port is a hardware terminal port with an RS-232 interface. Another common hardware example is a parallel printer port, say with a Centronics interface. The concept also includes virtual terminal ports, such as a software connection point for a remote console. The Character MIB is one of a set of MIBs designed for complementary use. At this writing, the set comprises: Character MIB PPP MIB RS-232-like MIB Parallel-printer-like MIBCharacter MIB Working Group [Page 2]
RFC 1316 Character MIB April 1992 The RS-232-like MIB and the Parallel-printer-like MIB represent the physical layer, providing service to higher layers such as the Character MIB or PPP MIB. Further MIBs may appear above these. The following diagram shows two possible "MIB stacks", each using the RS-232-like MIB. .-----------------. .-----------------. | Standard MIB | | Telnet MIB | | Interface Group | |-----------------| |-----------------| | Character MIB | | PPP MIB | |-----------------| |-----------------| | RS-232-like MIB | | RS-232-like MIB | `-----------------' `-----------------' The intent of the model is for the physical-level MIBs to represent the lowest level, regardless of the higher level that may be using it. In turn, separate higher level MIBs represent specific applications, such as a terminal (the Character MIB) or a network connection (the PPP MIB). For the most part, character ports are distinct from network interfaces (which are already covered by the Interface group). In general, they are attachment points for non-network devices. The exception is a character port that can support a network protocol, such as SLIP or PPP. This implies the existence of a corresponding entry in the Interfaces table, with ifOperStatus of 'off' while the port is not running a network protocol and 'on' if it is. The intent is that such usage is exclusive of non-network character stream usage. That is, while switched to network use, charPortOperStatus would be 'down' and Character MIB operational values such as charPortInFlowState and charPortInCharacters would be inactive. The Character MIB is mandatory for all systems that offer character ports. This includes, for example, terminal servers, general-purpose time-sharing hosts, and even such systems as a bridge with a (virtual) console port. It may or may not include character ports that do not support network sessions, depending on the system's needs. The Character MIB's central abstraction is a port. Physical ports have a one-to-one correspondence with hardware ports. Virtual ports are software entities analogous to physical ports, but with no hardware connector. Each port supports one or more sessions. A session represents a virtual connection that carries characters between the port and someCharacter MIB Working Group [Page 3]
RFC 1316 Character MIB April 1992 partner. Sessions typically operate over a stack of network protocols. A typical session, for example, uses Telnet over TCP. The MIB comprises one base object and two tables, detailed in the following sections. The tables contain objects for ports and sessions. The MIB intentionally contains no distinction between what is often called permanent and operational or volatile data bases. For the purposes of this MIB, handling of such distinctions is implementation specific.5. DefinitionsRFC1316-MIB DEFINITIONS ::= BEGIN IMPORTS Counter, TimeTicks, Gauge FROMRFC1155-SMI DisplayString FROMRFC1213-MIB OBJECT-TYPE FROMRFC-1212; -- this is the MIB module for character stream devices char OBJECT IDENTIFIER ::= { mib-2 19 } -- Textual Conventions AutonomousType ::= OBJECT IDENTIFIER -- The object identifier is an independently extensible type -- identification value. It may, for example indicate a -- particular sub-tree with further MIB definitions, or -- define something like a protocol type or type of -- hardware. InstancePointer ::= OBJECT IDENTIFIER -- The object identifier is a pointer to a specific instance -- of a MIB object in this agent's implemented MIB. By -- convention, it is the first object in the conceptual row -- for the instance.Character MIB Working Group [Page 4]
RFC 1316 Character MIB April 1992 -- the generic Character group -- Implementation of this group is mandatory for all -- systems that offer character ports charNumber OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The number of entries in charPortTable, regardless of their current state." ::= { char 1 } -- the Character Port table charPortTable OBJECT-TYPE SYNTAX SEQUENCE OF CharPortEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A list of port entries. The number of entries is given by the value of charNumber." ::= { char 2 } charPortEntry OBJECT-TYPE SYNTAX CharPortEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Status and parameter values for a character port." INDEX { charPortIndex } ::= { charPortTable 1 } CharPortEntry ::= SEQUENCE { charPortIndex INTEGER, charPortName DisplayString, charPortType INTEGER, charPortHardware AutonomousType, charPortReset INTEGER, charPortAdminStatusCharacter MIB Working Group [Page 5]
RFC 1316 Character MIB April 1992 INTEGER, charPortOperStatus INTEGER, charPortLastChange TimeTicks, charPortInFlowType INTEGER, charPortOutFlowType INTEGER, charPortInFlowState INTEGER, charPortOutFlowState INTEGER, charPortInCharacters Counter, charPortOutCharacters Counter, charPortAdminOrigin INTEGER, charPortSessionMaximum INTEGER, charPortSessionNumber Gauge, charPortSessionIndex INTEGER } charPortIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "A unique value for each character port. Its value ranges between 1 and the value of charNumber. By convention and if possible, hardware port numbers come first, with a simple, direct mapping. The value for each port must remain constant at least from one re-initialization of the network management agent to the next." ::= { charPortEntry 1 } charPortName OBJECT-TYPE SYNTAX DisplayString (SIZE (0..32)) ACCESS read-write STATUS mandatory DESCRIPTION "An administratively assigned name for the port, typically with some local significance."Character MIB Working Group [Page 6]
RFC 1316 Character MIB April 1992 ::= { charPortEntry 2 } charPortType OBJECT-TYPE SYNTAX INTEGER { physical(1), virtual(2) } ACCESS read-only STATUS mandatory DESCRIPTION "The port's type, 'physical' if the port represents an external hardware connector, 'virtual' if it does not." ::= { charPortEntry 3 } charPortHardware OBJECT-TYPE SYNTAX AutonomousType ACCESS read-only STATUS mandatory DESCRIPTION "A reference to hardware MIB definitions specific to a physical port's external connector. For example, if the connector is RS-232, then the value of this object refers to a MIB sub-tree defining objects specific to RS-232. If an agent is not configured to have such values, the agent returns the object identifier: nullHardware OBJECT IDENTIFIER ::= { 0 0 } " ::= { charPortEntry 4 } charPortReset OBJECT-TYPE SYNTAX INTEGER { ready(1), execute(2) } ACCESS read-write STATUS mandatory DESCRIPTION "A control to force the port into a clean, initial state, both hardware and software, disconnecting all the port's existing sessions. In response to a get-request or get-next-request, the agent always returns 'ready' as the value. Setting the value to 'execute' causes a reset." ::= { charPortEntry 5 } charPortAdminStatus OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2), off(3), maintenance(4) } ACCESS read-write STATUS mandatory DESCRIPTIONCharacter MIB Working Group [Page 7]
RFC 1316 Character MIB April 1992 "The port's desired state, independent of flow control. 'enabled' indicates that the port is allowed to pass characters and form new sessions. 'disabled' indicates that the port is allowed to pass characters but not form new sessions. 'off' indicates that the port is not allowed to pass characters or have any sessions. 'maintenance' indicates a maintenance mode, exclusive of normal operation, such as running a test." ::= { charPortEntry 6 } charPortOperStatus OBJECT-TYPE SYNTAX INTEGER { up(1), down(2), maintenance(3), absent(4), active(5) } ACCESS read-only STATUS mandatory DESCRIPTION "The port's actual, operational state, independent of flow control. 'up' indicates able to function normally. 'down' indicates inability to function for administrative or operational reasons. 'maintenance' indicates a maintenance mode, exclusive of normal operation, such as running a test. 'absent' indicates that port hardware is not present. 'active' indicates up with a user present (e.g. logged in)." ::= { charPortEntry 7 } charPortLastChange OBJECT-TYPE SYNTAX TimeTicks ACCESS read-only STATUS mandatory DESCRIPTION "The value of sysUpTime at the time the port entered its current operational state. If the current state was entered prior to the last reinitialization of the local network management subsystem, then this object contains a zero value." ::= { charPortEntry 8 } charPortInFlowType OBJECT-TYPE SYNTAX INTEGER { none(1), xonXoff(2), hardware(3), ctsRts(4), dsrDtr(5) } ACCESS read-write STATUS mandatory DESCRIPTION "The port's type of input flow control. 'none' indicates no flow control at this level or below.Character MIB Working Group [Page 8]
RFC 1316 Character MIB April 1992 'xonXoff' indicates software flow control by recognizing XON and XOFF characters. 'hardware' indicates flow control delegated to the lower level, for example a parallel port. 'ctsRts' and 'dsrDtr' are specific to RS-232-like ports. Although not architecturally pure, they are included here for simplicity's sake." ::= { charPortEntry 9 } charPortOutFlowType OBJECT-TYPE SYNTAX INTEGER { none(1), xonXoff(2), hardware(3), ctsRts(4), dsrDtr(5) } ACCESS read-write STATUS mandatory DESCRIPTION "The port's type of output flow control. 'none' indicates no flow control at this level or below. 'xonXoff' indicates software flow control by recognizing XON and XOFF characters. 'hardware' indicates flow control delegated to the lower level, for example a parallel port. 'ctsRts' and 'dsrDtr' are specific to RS-232-like ports. Although not architecturally pure, they are included here for simplicy's sake." ::= { charPortEntry 10 } charPortInFlowState OBJECT-TYPE SYNTAX INTEGER { none(1), unknown(2), stop(3), go(4) } ACCESS read-only STATUS mandatory DESCRIPTION "The current operational state of input flow control on the port. 'none' indicates not applicable. 'unknown' indicates this level does not know. 'stop' indicates flow not allowed. 'go' indicates flow allowed." ::= { charPortEntry 11 } charPortOutFlowState OBJECT-TYPE SYNTAX INTEGER { none(1), unknown(2), stop(3), go(4) } ACCESS read-only STATUS mandatory DESCRIPTION "The current operational state of output flow control on the port. 'none' indicates not applicable. 'unknown' indicates this level does notCharacter MIB Working Group [Page 9]
RFC 1316 Character MIB April 1992 know. 'stop' indicates flow not allowed. 'go' indicates flow allowed." ::= { charPortEntry 12 } charPortInCharacters OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Total number of characters detected as input from the port since system re-initialization and while the port operational state was 'up', 'active', or 'maintenance', including, for example, framing, flow control (i.e. XON and XOFF), each occurrence of a BREAK condition, locally-processed input, and input sent to all sessions." ::= { charPortEntry 13 } charPortOutCharacters OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Total number of characters detected as output to the port since system re-initialization and while the port operational state was 'up', 'active', or 'maintenance', including, for example, framing, flow control (i.e. XON and XOFF), each occurrence of a BREAK condition, locally-created output, and output received from all sessions." ::= { charPortEntry 14 } charPortAdminOrigin OBJECT-TYPE SYNTAX INTEGER { dynamic(1), network(2), local(3), none(4) } ACCESS read-write STATUS mandatory DESCRIPTION "The administratively allowed origin for establishing session on the port. 'dynamic' allows 'network' or 'local' session establishment. 'none' disallows session establishment." ::= { charPortEntry 15 } charPortSessionMaximum OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatoryCharacter MIB Working Group [Page 10]
RFC 1316 Character MIB April 1992 DESCRIPTION "The maximum number of concurrent sessions allowed on the port. A value of -1 indicates no maximum. Setting the maximum to less than the current number of sessions has unspecified results." ::= { charPortEntry 16 } charPortSessionNumber OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "The number of open sessions on the port that are in the connecting, connected, or disconnecting state." ::= { charPortEntry 17 } charPortSessionIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The value of charSessIndex for the port's first or only active session. If the port has no active session, the agent returns the value zero." ::= { charPortEntry 18 } -- the Character Session table charSessTable OBJECT-TYPE SYNTAX SEQUENCE OF CharSessEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A list of port session entries." ::= { char 3 } charSessEntry OBJECT-TYPE SYNTAX CharSessEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Status and parameter values for a character port session." INDEX { charSessPortIndex, charSessIndex } ::= { charSessTable 1 }Character MIB Working Group [Page 11]
RFC 1316 Character MIB April 1992 CharSessEntry ::= SEQUENCE { charSessPortIndex INTEGER, charSessIndex INTEGER, charSessKill INTEGER, charSessState INTEGER, charSessProtocol AutonomousType, charSessOperOrigin INTEGER, charSessInCharacters Counter, charSessOutCharacters Counter, charSessConnectionId InstancePointer, charSessStartTime TimeTicks } charSessPortIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The value of charPortIndex for the port to which this session belongs." ::= { charSessEntry 1 } charSessIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The session index in the context of the port, a non-zero positive integer. Session indexes within a port need not be sequential. Session indexes may be reused for different ports. For example, port 1 and port 3 may both have a session 2 at the same time. Session indexes may have any valid integer value, with any meaning convenient to the agent implementation." ::= { charSessEntry 2 }Character MIB Working Group [Page 12]
RFC 1316 Character MIB April 1992 charSessKill OBJECT-TYPE SYNTAX INTEGER { ready(1), execute(2) } ACCESS read-write STATUS mandatory DESCRIPTION "A control to terminate the session. In response to a get-request or get-next-request, the agent always returns 'ready' as the value. Setting the value to 'execute' causes termination." ::= { charSessEntry 3 } charSessState OBJECT-TYPE SYNTAX INTEGER { connecting(1), connected(2), disconnecting(3) } ACCESS read-only STATUS mandatory DESCRIPTION "The current operational state of the session, disregarding flow control. 'connected' indicates that character data could flow on the network side of session. 'connecting' indicates moving from nonexistent toward 'connected'. 'disconnecting' indicates moving from 'connected' or 'connecting' to nonexistent." ::= { charSessEntry 4 } charSessProtocol OBJECT-TYPE SYNTAX AutonomousType ACCESS read-only STATUS mandatory DESCRIPTION "The network protocol over which the session is running. Other OBJECT IDENTIFIER values may be defined elsewhere, in association with specific protocols. However, this document assigns those of known interest as of this writing." ::= { charSessEntry 5 } wellKnownProtocols OBJECT IDENTIFIER ::= { char 4 } protocolOther OBJECT IDENTIFIER ::= {wellKnownProtocols 1} protocolTelnet OBJECT IDENTIFIER ::= {wellKnownProtocols 2} protocolRlogin OBJECT IDENTIFIER ::= {wellKnownProtocols 3} protocolLat OBJECT IDENTIFIER ::= {wellKnownProtocols 4} protocolX29 OBJECT IDENTIFIER ::= {wellKnownProtocols 5} protocolVtp OBJECT IDENTIFIER ::= {wellKnownProtocols 6}Character MIB Working Group [Page 13]
RFC 1316 Character MIB April 1992 charSessOperOrigin OBJECT-TYPE SYNTAX INTEGER { unknown(1), network(2), local(3) } ACCESS read-only STATUS mandatory DESCRIPTION "The session's source of establishment." ::= { charSessEntry 6 } charSessInCharacters OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "This session's subset of charPortInCharacters." ::= { charSessEntry 7 } charSessOutCharacters OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "This session's subset of charPortOutCharacters." ::= { charSessEntry 8 } charSessConnectionId OBJECT-TYPE SYNTAX InstancePointer ACCESS read-only STATUS mandatory DESCRIPTION "A reference to additional local MIB information. This should be the highest available related MIB, corresponding to charSessProtocol, such as Telnet. For example, the value for a TCP connection (in the absence of a Telnet MIB) is the object identifier of tcpConnState. If an agent is not configured to have such values, the agent returns the object identifier: nullConnectionId OBJECT IDENTIFIER ::= { 0 0 } " ::= { charSessEntry 9 } charSessStartTime OBJECT-TYPE SYNTAX TimeTicks ACCESS read-only STATUS mandatory DESCRIPTION "The value of sysUpTime in MIB-2 when the sessionCharacter MIB Working Group [Page 14]
RFC 1316 Character MIB April 1992 entered connecting state." ::= { charSessEntry 10 } END6. Acknowledgements Based on several private MIBs, this document was produced by the Character MIB Working Group: Anne Ambler, Spider Charles Bazaar, Emulex Christopher Bucci, Datability Anthony Chung, Hughes LAN Systems George Conant, Xyplex John Cook, Chipcom James Davin, MIT-LCS Shawn Gallagher, DEC Tom Grant, Xylogics Frank Huang, Emulex David Jordan, Emulex Satish Joshi, SynOptics Frank Kastenholz, Clearpoint Ken Key, University of Tennessee Jim Kinder, Fibercom Rajeev Kochhar, 3Com John LoVerso, Xylogics Keith McCloghrie, Hughes LAN Systems Donald Merritt, BRL David Perkins, 3Com Jim Reinstedler, Ungerman-Bass Marshall Rose, PSI Ron Strich, SSDS Dean Throop, DG Bill Townsend, Xylogics Jesse Walker, DEC David Waitzman, BBN Bill Westfield, cisco7. References [1] Cerf, V., "IAB Recommendations for the Development of Internet Network Management Standards",RFC 1052, NRI, April 1988. [2] Cerf, V., "Report of the Second Ad Hoc Network Management Review Group",RFC 1109, NRI, August 1989.Character MIB Working Group [Page 15]
RFC 1316 Character MIB April 1992 [3] Rose M., and K. McCloghrie, "Structure and Identification of Management Information for TCP/IP-based internets",RFC 1155, Performance Systems International, Hughes LAN Systems, May 1990. [4] McCloghrie K., and M. Rose, "Management Information Base for Network Management of TCP/IP-based internets",RFC1156, Hughes LAN Systems, Performance Systems International, May 1990. [5] Case, J., Fedor, M., Schoffstall, M., and J. Davin, "Simple Network Management Protocol",RFC 1157, SNMP Research, Performance Systems International, Performance Systems International, MIT Laboratory for Computer Science, May 1990. [6] McCloghrie K., and M. Rose, Editors, "Management Information Base for Network Management of TCP/IP-based internets",RFC 1213, Performance Systems International, March 1991. [7] Information processing systems - Open Systems Interconnection - Specification of Abstract Syntax Notation One (ASN.1), International Organization for Standardization, International Standard 8824, December 1987. [8] Information processing systems - Open Systems Interconnection - Specification of Basic Encoding Rules for Abstract Notation One (ASN.1), International Organization for Standardization, International Standard 8825, December 1987. [9] Rose, M., and K. McCloghrie, Editors, "Concise MIB Definitions",RFC 1212, Performance Systems International, Hughes LAN Systems, March 1991. [10] Rose, M., Editor, "A Convention for Defining Traps for use with the SNMP",RFC 1215, Performance Systems International, March 1991.8. Security Considerations Security issues are not discussed in this memo.Character MIB Working Group [Page 16]
RFC 1316 Character MIB April 19929. Author's Address Bob Stewart Xyplex, Inc. 330 Codman Hill Road Boxborough, MA 01719 Phone: (508) 264-9900 EMail: rlstewart@eng.xyplex.comCharacter MIB Working Group [Page 17]
[8]ページ先頭