Movatterモバイル変換

[RFC Home] [TEXT|PDF|HTML] [Tracker] [IPR] [Info page]

PROPOSED STANDARD

Internet Engineering Task Force (IETF) T. HaynesRequest for Comments: 8434 HammerspaceUpdates:5661 August 2018Category: Standards TrackISSN: 2070-1721Requirements for Parallel NFS (pNFS) Layout TypesAbstract This document defines the requirements that individual Parallel NFS (pNFS) layout types need to meet in order to work within the pNFS framework as defined inRFC 5661. In so doing, this document aims to clearly distinguish between requirements for pNFS as a whole and those specifically directed to the pNFS file layout. The lack of a clear separation between the two sets of requirements has been troublesome for those specifying and evaluating new layout types. In this regard, this document updatesRFC 5661.Status of This Memo This is an Internet Standards Track document. This document is a product of the Internet Engineering Task Force (IETF). It represents the consensus of the IETF community. It has received public review and has been approved for publication by the Internet Engineering Steering Group (IESG). Further information on Internet Standards is available inSection 2 of RFC 7841. Information about the current status of this document, any errata, and how to provide feedback on it may be obtained athttps://www.rfc-editor.org/info/rfc8434.Copyright Notice Copyright (c) 2018 IETF Trust and the persons identified as the document authors. All rights reserved. This document is subject toBCP 78 and the IETF Trust's Legal Provisions Relating to IETF Documents (https://trustee.ietf.org/license-info) in effect on the date of publication of this document. Please review these documents carefully, as they describe your rights and restrictions with respect to this document. Code Components extracted from this document must include Simplified BSD License text as described in Section 4.e of the Trust Legal Provisions and are provided without warranty as described in the Simplified BSD License.Haynes Standards Track [Page 1]

RFC 8434 pNFS Layout Types August 2018Table of Contents1. Introduction ....................................................22. Definitions .....................................................32.1. Use of the Terms "Data Server" and "Storage Device" ........52.2. Requirements Language ......................................63. The Control Protocol ............................................63.1. Control Protocol Requirements ..............................83.2. Previously Undocumented Protocol Requirements ..............93.3. Editorial Requirements ....................................104. Specifications of Original Layout Types ........................114.1. File Layout Type ..........................................114.2. Block Layout Type .........................................124.3. Object Layout Type ........................................135. Summary ........................................................146. Security Considerations ........................................157. IANA Considerations ............................................158. References .....................................................168.1. Normative References ......................................168.2. Informative References ....................................16 Acknowledgments ...................................................17 Author's Address ..................................................171. Introduction The concept of "layout type" has a central role in the definition and implementation of Parallel NFS (pNFS) (see [RFC5661]). Clients and servers implementing different layout types behave differently in many ways while conforming to the overall pNFS framework defined in [RFC5661] and this document. Layout types may differ as to: o The method used to do I/O operations directed to data storage devices. o The requirements for communication between the metadata server (MDS) and the storage devices. o The means used to ensure that I/O requests are only processed when the client holds an appropriate layout. o The format and interpretation of nominally opaque data fields in pNFS-related NFSv4.x data structures. Each layout type will define the needed details for its usage in the specification for that layout type; layout type specifications are always Standards Track RFCs. Except for the file layout type definedHaynes Standards Track [Page 2]

RFC 8434 pNFS Layout Types August 2018 inSection 13 of [RFC5661], existing layout types are defined in their own Standards Track documents, and it is anticipated that new layout types will be defined in similar documents. The file layout type was defined in the Network File System (NFS) version 4.1 protocol specification [RFC5661]. The block layout type was defined in [RFC5663], and the object layout type was defined in [RFC5664]. Subsequently, the Small Computer System Interface (SCSI) layout type was defined in [RFC8154]. Some implementers have interpreted the text in Sections12 ("Parallel NFS (pNFS)") and 13 ("NFSv4.1 as a Storage Protocol in pNFS: the File Layout Type") of [RFC5661] as applying only to the file layout type. BecauseSection 13 was not covered in a separate Standards Track document such as those for both the block and object layout types, there was some confusion as to the responsibilities of both the metadata server and the data servers (DSs) that were laid out inSection 12. As a consequence, authors of new specifications (see [RFC8435] and [Lustre]) may struggle to meet the requirements to be a pNFS layout type. This document gathers the requirements from all of the original Standards Track documents regarding layout type and then specifies the requirements placed on all layout types independent of the particular type chosen.2. Definitions control communication requirement: the specification for information on layouts, stateids, file metadata, and file data that must be communicated between the metadata server and the storage devices. There is a separate set of requirements for each layout type. control protocol: the particular mechanism that an implementation of a layout type would use to meet the control communication requirement for that layout type. This need not be a protocol as normally understood. In some cases, the same protocol may be used as both a control protocol and storage protocol. storage protocol: the protocol used by clients to do I/O operations to the storage device. Each layout type specifies the set of storage protocols. loose coupling: when the control protocol is a storage protocol.Haynes Standards Track [Page 3]

RFC 8434 pNFS Layout Types August 2018 tight coupling: an arrangement in which the control protocol is one designed specifically for control communication. It may be either a proprietary protocol adapted specifically to a particular metadata server or a protocol based on a Standards Track document. (file) data: that part of the file system object that contains the data to be read or written. It is the contents of the object rather than the attributes of the object. data server (DS): a pNFS server that provides the file's data when the file system object is accessed over a file-based protocol. Note that this usage differs from that in [RFC5661], which applies the term in some cases even when other sorts of protocols are being used. Depending on the layout, there might be one or more data servers over which the data is striped. While the metadata server is strictly accessed over the NFSv4.1 protocol, the data server could be accessed via any file access protocol that meets the pNFS requirements. SeeSection 2.1 for a comparison of this term and "storage device". storage device: the target to which clients may direct I/O requests when they hold an appropriate layout. Note that each data server is a storage device but that some storage device are not data servers. SeeSection 2.1 for further discussion. fencing: the process by which the metadata server prevents the storage devices from processing I/O from a specific client to a specific file. layout: the information a client uses to access file data on a storage device. This information includes specification of the protocol (layout type) and the identity of the storage devices to be used. The bulk of the contents of the layout are defined in [RFC5661] as nominally opaque, but individual layout types are responsible for specifying the format of the layout data. layout iomode: a grant of either read-only or read/write I/O to the client. layout stateid: a 128-bit quantity returned by a server that uniquely defines the layout state provided by the server for a specific layout that describes a layout type and file (seeHaynes Standards Track [Page 4]

RFC 8434 pNFS Layout Types August 2018Section 12.5.2 of [RFC5661]). Further,Section 12.5.3 of [RFC5661] describes differences in handling between layout stateids and other stateid types. layout type: a specification of both the storage protocol used to access the data and the aggregation scheme used to lay out the file data on the underlying storage devices. recalling a layout: a graceful recall, via a callback, of a specific layout by the metadata server to the client. Graceful here means that the client would have the opportunity to flush any WRITEs, etc., before returning the layout to the metadata server. revoking a layout: an invalidation of a specific layout by the metadata server. Once revocation occurs, the metadata server will not accept as valid any reference to the revoked layout, and a storage device will not accept any client access based on the layout. (file) metadata: the part of the file system object that contains various descriptive data relevant to the file object, as opposed to the file data itself. This could include the time of last modification, access time, EOF position, etc. metadata server (MDS): the pNFS server that provides metadata information for a file system object. It is also responsible for generating, recalling, and revoking layouts for file system objects, for performing directory operations, and for performing I/O operations to regular files when the clients direct these to the metadata server itself. stateid: a 128-bit quantity returned by a server that uniquely defines the set of locking-related state provided by the server. Stateids may designate state related to open files, byte-range locks, delegations, or layouts.2.1. Use of the Terms "Data Server" and "Storage Device" In [RFC5661], the terms "data server" and "storage device" are used somewhat inconsistently: o InSection 12, where pNFS in general is discussed, the term "storage device" is used. o InSection 13, where the file layout type is discussed, the term "data server" is used.Haynes Standards Track [Page 5]

RFC 8434 pNFS Layout Types August 2018 o In other sections, the term "data server" is used, even in contexts where the storage access type is not NFSv4.1 or any other file access protocol. As this document deals with pNFS in general, it uses the more generic term "storage device" in preference to "data server". The term "data server" is used only in contexts in which a file server is used as a storage device. Note that every data server is a storage device, but storage devices that use protocols that are not file access protocols (such as NFS) are not data servers. Since a given storage device may support multiple layout types, a given device can potentially act as a data server for some set of storage protocols while simultaneously acting as a storage device for others.2.2. Requirements Language The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT", "SHOULD", "SHOULD NOT", "RECOMMENDED", "NOT RECOMMENDED", "MAY", and "OPTIONAL" in this document are to be interpreted as described inBCP 14 [RFC2119] [RFC8174] when, and only when, they appear in all capitals, as shown here. This document differs from most Standards Track documents in that it specifies requirements for those defining future layout types rather than defining the requirements for implementations directly. This document makes clear whether: (1) any particular requirement applies to implementations. (2) any particular requirement applies to those defining layout types. (3) the requirement is a general requirement that implementations need to conform to, with the specific means left to layout type definitions type to specify.3. The Control Protocol A layout type has to meet the requirements that apply to the interaction between the metadata server and the storage device such that they present to the client a consistent view of stored data and locking state (Section 12.2.6 of [RFC5661]). Particular implementations may satisfy these requirements in any manner they choose, and the mechanism chosen need not be described as a protocol. Specifications defining layout types need to clearly show how implementations can meet the requirements discussed below, especiallyHaynes Standards Track [Page 6]

RFC 8434 pNFS Layout Types August 2018 with respect to those that have security implications. In addition, such specifications may find it necessary to impose requirements on implementations of the layout type to ensure appropriate interoperability. In some cases, there may be no control protocol other than the storage protocol. This is often described as using a "loosely coupled" model. In such cases, the assumption is that the metadata server, storage devices, and client may be changed independently and that the implementation requirements in the layout type specification need to ensure this degree of interoperability. This model is used in the block and object layout type specification. In other cases, it is assumed that there will be a purpose-built control protocol that may be different for different implementations of the metadata server and data server. The assumption here is that the metadata server and data servers are designed and implemented as a unit and interoperability needs to be assured between clients and metadata-data server pairs, developed independently. This is the model used for the file layout. Another possibility is for the definition of a control protocol to be specified in a Standards Track document. There are two subcases to consider: o A new layout type includes a definition of a particular control protocol whose use is obligatory for metadata servers and storage devices implementing the layout type. In this case, the interoperability model is similar to the first case above, and the defining document should assure interoperability among metadata servers, storage devices, and clients developed independently. o A control protocol is defined in a Standards Track document that meets the control protocol requirements for one of the existing layout types. In this case, the new document's job is to assure interoperability between metadata servers and storage devices developed separately. The existing definition document for the selected layout type retains the function of assuring interoperability between clients and a given collection of metadata servers and storage devices. In this context, implementations that implement the new protocol are treated in the same way as those that use an internal control protocol or a functional equivalent. An example of this last case is the SCSI layout type [RFC8154], which extends the block layout type. The block layout type had a requirement for fencing of clients but did not present a way for theHaynes Standards Track [Page 7]

RFC 8434 pNFS Layout Types August 2018 control protocol (in this case, the SCSI storage protocol) to fence the client. The SCSI layout type remedies that in [RFC8154] and, in effect, has a tightly coupled model.3.1. Control Protocol Requirements The requirements of interactions between the metadata server and the storage devices are: (1) The metadata server MUST be able to service the client's I/O requests if the client decides to make such requests to the metadata server instead of to the storage device. The metadata server must be able to retrieve the data from the constituent storage devices and present it back to the client. A corollary to this is that even though the metadata server has successfully given the client a layout, the client MAY still send I/O requests to the metadata server. (2) The metadata server MUST be able to restrict access to a file on the storage devices when it revokes a layout. The metadata server typically would revoke a layout whenever a client fails to respond to a recall or a client's lease is expired due to non-renewal. It might also revoke the layout as a means of enforcing a change in locking state or access permissions that the storage device cannot directly enforce. Effective revocation may require client cooperation in using a particular stateid (file layout) or principal (e.g., flexible file layout) when performing I/O. In contrast, there is no requirement to restrict access to a file on the storage devices when a layout is recalled. It is only after the metadata server determines that the client is not gracefully returning the layout and starts the revocation that this requirement is enforced. (3) A pNFS implementation MUST NOT allow the violation of NFSv4.1's access controls: Access Control Lists (ACLs) and file open modes.Section 12.9 of [RFC5661] specifically lays this burden on the combination of clients, storage devices, and the metadata server. However, the specification of the individual layout type might create requirements as to how this is to be done. This may include a possible requirement for the metadata server to update the storage device so that it can enforce security. The file layout requires the storage device to enforce access whereas the flexible file layout requires both the storage device and the client to enforce security.Haynes Standards Track [Page 8]

RFC 8434                    pNFS Layout Types                August 2018   (4)  Interactions between locking and I/O operations MUST obey        existing semantic restrictions.  In particular, if an I/O        operation would be invalid when directed at the metadata server,        it is not to be allowed when performed on the storage device.        For the block and SCSI layouts, as the storage device is not        able to reject the I/O operation, the client is responsible for        enforcing this requirement.   (5)  Any disagreement between the metadata server and the data server        as to the value of attributes such as modify time, the change        attribute, and the EOF position MUST be of limited duration with        clear means of resolution of any discrepancies being provided.        Note the following:        (a)  Discrepancies need not be resolved unless any client has             accessed the file in question via the metadata server,             typically by performing a GETATTR.        (b)  A particular storage device might be striped, and as such,             its local view of the EOF position does not match the             global EOF position.        (c)  Both clock skew and network delay can lead to the metadata             server and the storage device having different values of             the time attributes.  As long as those differences can be             accounted for in what is presented to the client in a             GETATTR, then no violation results.        (d)  A LAYOUTCOMMIT requires that changes in attributes             resulting from operations on the storage device need to be             reflected in the metadata server by the completion of the             operation.   These requirements may be satisfied in different ways by different   layout types.  As an example, while the file layout type uses the   stateid to fence off the client, there is no requirement that other   layout types use this stateid approach.   Each new Standards Track document for a layout type MUST address how   the client, metadata server, and storage devices are to interact to   meet these requirements.3.2.  Previously Undocumented Protocol Requirements   While not explicitly stated as requirements inSection 12 of   [RFC5661], the existing layout types do have more requirements that   they need to enforce.Haynes                       Standards Track                    [Page 9]

RFC 8434 pNFS Layout Types August 2018 The client has these obligations when making I/O requests to the storage devices: (1) Clients MUST NOT perform I/O to the storage device if they do not have layouts for the files in question. (2) Clients MUST NOT perform I/O operations outside of the specified ranges in the layout segment. (3) Clients MUST NOT perform I/O operations that would be inconsistent with the iomode specified in the layout segments it holds. Under the file layout type, the storage devices are able to reject any request made not conforming to these requirements. This may not be possible for other known layout types, which puts the burden of enforcing such violations solely on the client. For these layout types: (1) The metadata server MAY use fencing operations to the storage devices to enforce layout revocation against the client. (2) The metadata server MUST allow the clients to perform data I/O against it, even if it has already granted the client a layout. A layout type might discourage such I/O, but it cannot forbid it. (3) The metadata server MUST be able to do storage allocation, whether that is to create, delete, extend, or truncate files. The means to address these requirements will vary with the layout type. A control protocol will be used to effect these; the control protocol could be a purpose-built one, one identical to the storage protocol, or a new Standards Track control protocol.3.3. Editorial Requirements This section discusses how the protocol requirements discussed above need to be addressed in documents specifying a new layout type. Depending on the interoperability model for the layout type in question, this may involve the imposition of layout-type-specific requirements that ensure appropriate interoperability of pNFS components that are developed separately. The specification of the layout type needs to make clear how the client, metadata server, and storage device act together to meet the protocol requirements discussed previously. If the document does notHaynes Standards Track [Page 10]

RFC 8434                    pNFS Layout Types                August 2018   impose implementation requirements sufficient to ensure that these   semantic requirements are met, it is not appropriate for publication   as an RFC from the IETF stream.   Some examples include:   o  If the metadata server does not have a means to invalidate a      stateid issued to the storage device to keep a particular client      from accessing a specific file, then the layout type specification      has to document how the metadata server is going to fence the      client from access to the file on that storage device.   o  If the metadata server implements mandatory byte-range locking      when accessed directly by the client, then the layout type      specification must require that this also be done when data is      read or written using the designated storage protocol.4.  Specifications of Original Layout Types   This section discusses how the original layout types interact withSection 12 of [RFC5661], which enumerates the requirements of pNFS   layout type specifications.  It is not normative with regards to the   file layout type presented inSection 13 of [RFC5661], the block   layout type [RFC5663], and the object layout type [RFC5664].  These   are discussed here only to illuminate the updatesSection 3 of this   document makes toSection 12 of [RFC5661].4.1.  File Layout Type   Because the storage protocol is a subset of NFSv4.1, the semantics of   the file layout type comes closest to the semantics of NFSv4.1 in the   absence of pNFS.  In particular, the stateid and principal used for   I/O MUST have the same effect and be subject to the same validation   on a data server as it would have if the I/O were being performed on   the metadata server itself.  The same set of validations are applied   whether or not pNFS is in effect.   While for most implementations, the storage devices can do the   following validations that are each presented as a "SHOULD" and not a   "MUST" in [RFC5661]:   (1)  client holds a valid layout,   (2)  client I/O matches the layout iomode, and   (3)  client does not go out of the byte ranges,Haynes                       Standards Track                   [Page 11]

RFC 8434                    pNFS Layout Types                August 2018   Actually, the first point is presented in [RFC5661] as both:   "MUST":  inSection 13.6      As described inSection 12.5.1, a client MUST NOT send an I/O to a      data server for which it does not hold a valid layout; the data      server MUST reject such an I/O.   "SHOULD":  inSection 13.8      The iomode need not be checked by the data servers when clients      perform I/O.  However, the data servers SHOULD still validate that      the client holds a valid layout and return an error if the client      does not.   It should be noted that it is just these layout-specific checks that   are optional, not the normal file access semantics.  The storage   devices MUST make all of the required access checks on each READ or   WRITE I/O as determined by the NFSv4.1 protocol.  If the metadata   server would deny a READ or WRITE operation on a file due to its ACL,   mode attribute, open access mode, open deny mode, mandatory byte-   range locking state, or any other attributes and state, the storage   device MUST also deny the READ or WRITE operation.  Also, while the   NFSv4.1 protocol does not mandate export access checks based on the   client's IP address, if the metadata server implements such a policy,   then that counts as such state as outlined above.   The data filehandle provided by the PUTFH operation to the data   server provides sufficient context to enable the data server to   ensure that the client has a valid layout for the I/O being performed   for the subsequent READ or WRITE operation in the compound.   Finally, the data server can check the stateid presented in the READ   or WRITE operation to see if that stateid has been rejected by the   metadata server; if so, the data server will cause the I/O to be   fenced.  Whilst it might just be the open owner or lock owner on that   client being fenced, the client should take the NFS4ERR_BAD_STATEID   error code to mean it has been fenced from the file and contact the   metadata server.4.2.  Block Layout Type   With the block layout type, the storage devices are generally not   able to enforce file-based security.  Typically, storage area network   (SAN) disk arrays and SAN protocols provide coarse-grained access   control mechanisms (e.g., Logical Unit Number (LUN) mapping and/or   masking), with a target granularity of disks rather than individual   blocks and a source granularity of individual hosts rather than ofHaynes                       Standards Track                   [Page 12]

RFC 8434 pNFS Layout Types August 2018 users or owners. Access to block storage is logically at a lower layer of the I/O stack than NFSv4. Since NFSv4 security is not directly applicable to protocols that access such storage directly,Section 2.1 of [RFC5663] specifies that: in environments where pNFS clients cannot be trusted to enforce such policies, pNFS block layout types SHOULD NOT be used. Due to these granularity issues, the security burden has been shifted from the storage devices to the client. Those deploying implementations of this layout type need to be sure that the client implementation can be trusted. This is not a new sort of requirement in the context of SAN protocols. In such environments, the client is expected to provide block-based protection. This shift of the burden also extends to locks and layouts. The storage devices are not able to enforce any of these, and the burden is pushed to the client to make the appropriate checks before sending I/O to the storage devices. For example, the server may use a layout iomode only allowing reading to enforce a mandatory read-only lock. In such cases, the client has to support that use by not sending WRITEs to the storage devices. The fundamental issue here is that the storage device is treated by this layout type in the same fashion as a local disk device. Once the client has access to the storage device, it is able to perform both READ and WRITE I/O to the entire storage device. The byte ranges in the layout, any locks, the layout iomode, etc., can only be enforced by the client. Therefore, the client is required to provide that enforcement. In the context of fencing off of the client upon revocation of a layout, these limitations come into play again, i.e., the granularity of the fencing can only be at the level of the host and logical unit. Thus, if one of a client's layouts is revoked by the server, it will effectively revoke all of the client's layouts for files located on the storage units comprising the logical volume. This may extend to the client's layouts for files in other file systems. Clients need to be prepared for such revocations and reacquire layouts as needed.4.3. Object Layout Type With the object layout type, security checks occur during the allocation of the layout. The client will typically ask for layouts covering all of the file and may do so for either READ or READ/WRITE. This enables it to do subsequent I/O operations without the need to obtain layouts for specific byte ranges. At that time, the metadata server should verify permissions against the layout iomode, the file mode bits or ACLs, etc. As the client may be acting for multipleHaynes Standards Track [Page 13]

RFC 8434                    pNFS Layout Types                August 2018   local users, it MUST authenticate and authorize the user by issuing   respective OPEN and ACCESS calls to the metadata server, similar to   having NFSv4 data delegations.   Upon successful authorization, the client receives within the layout   a set of object capabilities allowing it I/O access to the specified   objects corresponding to the requested iomode.  These capabilities   are used to enforce access control and locking semantics at the   storage devices.  Whenever one of the following occurs on the   metadata server, then the metadata server MUST change the capability   version attribute on all objects comprising the file in order to   invalidate any outstanding capabilities before committing to one of   these changes:   o  the permissions on the object change,   o  a conflicting mandatory byte-range lock is granted, or   o  a layout is revoked and reassigned to another client.   When the metadata server wishes to fence off a client to a particular   object, then it can use the above approach to invalidate the   capability attribute on the given object.  The client can be informed   via the storage device that the capability has been rejected and is   allowed to fetch a refreshed set of capabilities, i.e., reacquire the   layout.5.  Summary   In the three original layout types, the burden of enforcing the   security of NFSv4.1 can fall to either the storage devices (files),   the client (blocks), or the metadata server (objects).  Such choices   are conditioned by the native capabilities of the storage devices --   if a control protocol can be implemented, then the burden can be   shifted primarily to the storage devices.   In the context of this document, we treat the control protocol as a   set of requirements.  As new layout types are published, the defining   documents MUST address:   (1)  The fencing of clients after a layout is revoked.   (2)  The security implications of the native capabilities of the        storage devices with respect to the requirements of the NFSv4.1        security model.Haynes                       Standards Track                   [Page 14]

RFC 8434 pNFS Layout Types August 2018 In addition, these defining documents need to make clear how other semantic requirements of NFSv4.1 (e.g., locking) are met in the context of the proposed layout type.6. Security Considerations This section does not deal directly with security considerations for existing or new layout types. Instead, it provides a general framework for understating security-related issues within the pNFS framework. Specific security considerations will be addressed in the Security Considerations sections of documents specifying layout types. For example, inSection 3 of [RFC5663], the lack of finer- than-physical disk access control necessitates that the client is delegated the responsibility to enforce the access provided to them in the layout extent that they were granted by the metadata server. The layout type specification must ensure that only data access consistent with the NFSV4.1 security model is allowed. It may do this directly, by providing that appropriate checks be performed at the time each access is performed. It may do it indirectly by allowing the client or the storage device to be responsible for making the appropriate checks. In the latter case, I/O access rights are reflected in layouts, and the layout type must provide a way to prevent inappropriate access due to permissions changes between the time a layout is granted and the time the access is performed. The metadata server MUST be able to fence off a client's access to the data file on a storage device. When it revokes the layout, the client's access MUST be terminated at the storage devices. The client has a subsequent opportunity to reacquire the layout and perform the security check in the context of the newly current access permissions.7. IANA Considerations This document has no IANA actions.Haynes Standards Track [Page 15]

RFC 8434                    pNFS Layout Types                August 20188.  References8.1.  Normative References   [RFC2119]  Bradner, S., "Key words for use in RFCs to Indicate              Requirement Levels",BCP 14,RFC 2119,              DOI 10.17487/RFC2119, March 1997,              <https://www.rfc-editor.org/info/rfc2119>.   [RFC5661]  Shepler, S., Ed., Eisler, M., Ed., and D. Noveck, Ed.,              "Network File System (NFS) Version 4 Minor Version 1              Protocol",RFC 5661, DOI 10.17487/RFC5661, January 2010,              <https://www.rfc-editor.org/info/rfc5661>.   [RFC5663]  Black, D., Fridella, S., and J. Glasgow, "Parallel NFS              (pNFS) Block/Volume Layout",RFC 5663,              DOI 10.17487/RFC5663, January 2010,              <https://www.rfc-editor.org/info/rfc5663>.   [RFC5664]  Halevy, B., Welch, B., and J. Zelenka, "Object-Based              Parallel NFS (pNFS) Operations",RFC 5664,              DOI 10.17487/RFC5664, January 2010,              <https://www.rfc-editor.org/info/rfc5664>.   [RFC8154]  Hellwig, C., "Parallel NFS (pNFS) Small Computer System              Interface (SCSI) Layout",RFC 8154, DOI 10.17487/RFC8154,              May 2017, <https://www.rfc-editor.org/info/rfc8154>.   [RFC8174]  Leiba, B., "Ambiguity of Uppercase vs Lowercase inRFC2119 Key Words",BCP 14,RFC 8174, DOI 10.17487/RFC8174,              May 2017, <https://www.rfc-editor.org/info/rfc8174>.8.2.  Informative References   [Lustre]   Faibish, S., Cote, D., and P. Tao, "Parallel NFS (pNFS)              Lustre Layout Operations", Work in Progress,draft-faibish-nfsv4-pnfs-lustre-layout-07, May 2014.   [RFC8435]  Halevy, B. and T. Haynes, "Parallel NFS (pNFS) Flexible              File Layout",RFC 8435, DOI 10.17487/RFC8435, August 2018,              <https://www.rfc-editor.org/info/rfc8435>.Haynes                       Standards Track                   [Page 16]

RFC 8434                    pNFS Layout Types                August 2018Acknowledgments   Dave Noveck provided an early review that sharpened the clarity of   the definitions.  He also provided a more comprehensive review of the   document.   Both Chuck Lever and Christoph Helwig provided insightful comments   during the working group last call.Author's Address   Thomas Haynes   Hammerspace   4300 El Camino Real Ste 105   Los Altos, CA  94022   United States of America   Email: loghyr@gmail.comHaynes                       Standards Track                   [Page 17]

[8]ページ先頭