Movatterモバイル変換


[0]ホーム

URL:


Skip to main content
U.S. flag

An official website of the United States government

Official websites use .gov
A.gov website belongs to an official government organization in the United States.

Secure .gov websites use HTTPS
Alock (LockA locked padlock) orhttps:// means you’ve safely connected to the .gov website. Share sensitive information only on official, secure websites.

https://www.nist.gov/laboratories/tools-instruments

National Institute of Standards and Technology
National Institute of Standards and Technology

Tools and Instruments

Topic Area
Displaying 1 - 25 of 401
NIST's million-pound deadweight stack, assembled

4.45 MN Deadweight Force Generating Machine (Million Pound Force Dead Weight Machine)

The largest of 6 NIST deadweight force generation machines, the 4.45 MN Deadweight Force Generating Machine can apply 20 equal force increments of 222 kN (or
droptower202

4 m Drop Tower with Instrumented Impactor

The Security Technologies Group has a 4-m-tall drop tower that can be configured for a wide variety of impact and impact-related testing. This drop tower is
National 8M & 3B-B Torch Station

8M Combo Torch & 3B-B Air/Gas Torch

The surface bench torch uses a combination of propane and oxygen. The surface bench torch comes standard with a swivel ball mounting on a stable, cast steel U
Aberration-Corrected Transmission Electron Microscope (TEM)

Aberration-Corrected Transmission Electron Microscope (TEM)

Probe corrected 200kV analytic electron microscope Resolves single atoms Chemical analytic capability (EELS, EDS) Highest resolution in electron optics (<0.1 nm
Accucold FF6 Refrigerator

Accucold FF6 Refrigerator

Access Information Refrigerators and freezers are available in the laboratories for storing temperature sensitive samples shortly before, during and shortly
Accumet Research pH Meter

Accumet Research Model AR25 pH Meter

Accumet Research Model AR25 pH Meter. Please see manual.
Across International AT09

Across International AT09-UL Vacuum Drying Oven

This piece of equipment must be signed out prior to use. Please see manual.
TEMP

Additive Manufacturing Metrology Testbed (AMMT)

The NIST Additive Manufacturing Metrology Testbed is a fully custom, open-platform laser powder bed fusion (LBPF) system to advance monitoring, controls, and

Additive Manufacturing Powder Metrology Laboratory

NIST researchers are developing and deploying test methods, protocols, and exemplar data for characterizing the properties of metal powders used in commercial
Additive Manufacturing Research Center (AMRC)

Additive Manufacturing Research Center (AMRC)

The Metal Additive Manufacturing (AM) Research Facility is now called the Additive Manufacturing Research Center (AMRC). Additive manufacturing gives U.S

Advanced infrared radiometry and imaging (AIRI)

Radiation thermometers and blackbodies can be calibrated using a set of blackbodies. These blackbodies can vary in size and can be fixed-points of the ITS-90 or
Air Control Inc. Microvoid 4F-55 Fume Hood

Air Control Inc. Microvoid 4F-55 Fume Hood

Please refer to the instruction manual for further information.
Plot of aluminum oxide photodetector typical responsivity in the EUV.

Aluminum Oxide EUV Photodetector Transfer Standard

Aluminum oxide (Al 2O 3) photodiodes are issued by NIST as transfer standard detectors in the extreme ultraviolet spectral region (5 nm to 125 nm). Each device

Analytical Electron Microscope

The Titan 80-300 is a transmission electron microscope (TEM) equipped with spectroscopic detectors to allow chemical, elemental, and other analytical
Anton Paar DMA 5000 Density Meter

Anton Paar DMA 5000 Density Meter

This instrument is used to perform accurate density measurements over a specified density, temperature, and viscosity range. At the end of an analysis, the
E137_SAXsess_Hasris

Anton Paar SAXess X Ray Device

Anton Paar SAXess X Ray Device
HTTE Apparatus

Apparatus for the Measurement of High Temperature Thermoelectric Transport Properties

Description The Seebeck coefficient is a widely measured transport property that provides fundamental information on charge carrier transport and the electronic
AR200 Refractometer meter E136

AR200 Refractometer meter

Reichert AR200 Digital Handheld Refractometer has the capability to measure RefractiveIndex (nD) of liquid solutions to a precision of +/- 0.0001 or % Solids
ATI Orion 130 Conductivity Meter

ATI Orion Model 130 Conductivity Meter

Please refer to the owner's manual for further information.
atomprobe1

Atom Probe Tomography (LEAP 4000X Si/HR – Local Electrode Atom Probe)

LEAP 4000X Si/HR Imaging time-of-flight mass spectrometer and field ion microscope. Can deliver 3-D, isotopically- and chemically- resolved images Sub-nanometer
E135_Custom_Extruder

Avanti Custom Mini Extruder

Custom modified. The Avanti Mini- Extruder allows researchers and scientists to prepare large, unilamellar vesicles by extrusion in an efficient, rapid manner.
A121 Biolievel II hood

Baker Biochem GARD Biosafety Cabinet

Baker Biochem GARD Biosafety Cabinet. Please see manual.
Barnstead Lab-Line 3608-5 Vacuum Oven

Barnstead Lab-Line 3608-5 Oven

Please refer to the owner's manual for further information.
Barnstead MicroPure UV Water Purification System

Barnstead MicroPure UV Water Purification System

Barnstead MicroPure UV Water Purification System. Please see manual.

[8]ページ先頭

©2009-2025 Movatter.jp