• GeneReviews by Title

Clinical Exome Sequencing

The humanexome includes all coding nuclear DNA sequences, approximately 180,000 exons that are transcribed into mature RNA. (Note that mitochondrial DNA is not included in the exome.) Comprising only 1%-2% of the human genome, the exome nonetheless contains the majority of currently recognized disease-causing variants.

Exome sequencing is a laboratory test designed to identify and analyze the sequence of all protein-coding nuclear genes in the genome. Approximately 95% of theexome can be sequenced with currently available techniques. The diagnostic utility ofexome sequencing has consistently been 20%-30% (i.e., a diagnosis is identified in 20%-30% of individuals who were previously undiagnosed but had features suggestive of a genetic condition) [Gahl et al 2012,Lazaridis et al 2016].

In the past five years,exome sequencing has increasingly become clinically available because:

• Continuous improvements in massively parallel sequencing and bioinformatics tools for data analysis have lowered the cost and decreased the turn-around time;
• Reports of clinically actionable results have led to improved coverage by medical insurance [Lazaridis et al 2016].

Clinical Genome Sequencing

The human genome includes all coding and noncoding nuclear and mitochondrial DNA sequences. Nuclear DNA encodes most of the more than 20,000 genes in humans; mitochondrial DNA encodes 37 genes. Most of the more than 3.2 billion base pairs that comprise the human genome are repetitive DNA or noncoding sequences – including noncoding RNAs, variants in which have been attributed to specific inherited disorders.

Genome sequencing is a laboratory test designed to identify and analyze the sequence of all coding and noncoding nuclear DNA. Mitochondrial DNA is part of the genome; however, mitochondrial sequencing is often ordered as a separate laboratory test.

Genome sequencing continues to be significantly more costly thanexome sequencing because of the high cost of data analysis. However, the diagnostic utility (20%-30%) is roughly the same for the two test methods: althoughgenome sequencing can identify variants outside of the coding regions, determination of pathogenicity of these variants is often not possible. Therefore, most confirmed pathogenic variants identified by genome sequencing are within exons [Taylor et al 2015].

What variables affect the diagnostic sensitivity of multigene panels?

• The genes included in multigene panels vary by laboratory.
• Methods used in amultigene panel may includesequence analysis,deletion/duplication analysis, and/or other non-sequencing-based tests.
• Sequence enrichment methods vary.
• Laboratories frequently update multigene panels to include analysis of:
  • Noncoding regions (e.g., promoters); and
  • Additional genes as they are discovered.

What kinds of multigene panels are available?

• Off-the-shelf. These are designed by a laboratory to include genes commonly associated with a broadphenotype (e.g., ataxia, intellectual disability, cardiomyopathy) or a recognizable syndrome with genetic heterogeneity (e.g., Noonan syndrome). Off-the-shelf multigene panels may include additional test methods (e.g.,deletion/duplication analysis or other non-sequencing-based tests).
• Custom designed. These include genes selected by a clinician for analysis by sequencing. Sequencing results for eachgene on the custommultigene panel are reported to the ordering clinician, whereas the sequencing data from the remaining genes sequenced (but not requested by the clinician) are not analyzed or included in the final laboratory report. Custom multigene panels offered by some reference laboratories are marketed under names such as XomeDxSlice^® and ExomeNext-Select^®.

How do off-the-shelf multigene panels compare with custom multigene panels?

• Custom multigene panels allow clinicians to design a single molecular genetic test for individuals with multisystem involvement, for which one off-the-shelfmultigene panel is not clinically available.
• If apathogenic variant(s) is not identified in one of the genes analyzed on the custommultigene panel, reflex analysis of other targeted genes may be faster and less expensive, and it typically does not require an additional sample from the individual being tested or from the biological parents of the individual being tested (if samples from the parents were sent when ordering the custom multigene panel).

What are the disadvantages of custom multigene panels compared to off-the-shelf multigene panels?

• Clinicalsensitivity for custom multigene panels is not known and may be lower than for larger panels.
• Custom multigene panels cannot detect larger deletions or duplications within the genes of interest.
• Custom multigene panels may not include ancillary assays necessary to cover regions with (e.g.) highly homologous pseudogenes, deepintronic pathogenic variants, and expanded nucleotide repeats.

When does exome sequencing provide the best test value?

• When the clinical features in a patient are not highly suggestive of a known genetic condition
• When the clinical features in a patient are suggestive of several genetic conditions that are not included in onemultigene panel
• When the clinical features in a patient and the family history are suggestive of a highly penetrant Mendelian condition that cannot be identified byphenotype alone

What types of disorders can be reliably diagnosed by exome sequencing?

• Mendelian disorders caused bymissense ornonsense variants that:
  • Are rare in the population; and
  • Have been previously reported as pathogenic in the literature or HGMD^® (Human Gene Mutation Database)
• Mendelian disorders caused by small insertions or deletions (<50 bp) within non-repetitive, coding DNA

What types of genetic alterations cannot be reliably identified by exome sequencing?

Exome sequencing requires sequence enrichment to target exons and sequence eachexon. Genetic alterations that cannot reliably be detected byexome sequencing include alterations that:

• Disrupt probe binding during the enrichment process; thus, theexon is not sequenced and not included in the analysis;
• Influencegene expression without changing DNA sequence (e.g.,imprinting errors,uniparental heterodisomy);
• Are present in a highly repetitive region of DNA that is difficult to sequence (e.g.,nucleotide repeat expansions and contractions);
• Involve agene that is highly homologous to other gene family members or apseudogene;
• Are present in a deepintronic (noncoding) region;
• Are present in mitochondrial DNA, not nuclear DNA;
• Are somatic mosaic changes (i.e., the genetic change is present in a small percentage of cells and not present in thegermline, i.e., all cells); thus, either base calls do not pass quality thresholds or the genetic change was not present in the cells from which the DNA was extracted;
• Result from large copy number variants (i.e., insertions or deletions >50 bp). Although copy number variants may be identified onexome sequencing by comparing actual read depth to expected read depth through intra- and inter-sample comparisons, variations in read depth (e.g., due to guanine-cytosine [GC] content of a region) can lead to false positive results.
• Result from structuralchromosome rearrangements (e.g., inversions, translocations). Note that chromosome rearrangements may be identified by using paired-end and mate-pair mapping to identify misalignment of sequences to a reference genome.

What types of disorders are not reliably identified by exome sequencing?

Disorders resulting from genetic alterations that are not reliably identified byexome sequencing because of technical limitations:

• Imprinting errors. SeeGenetic Disorders Caused by Imprinting Errors and Uniparental Disomy.
• Uniparental heterodisomy with norecombination event when sequencing theproband only. SeeGenetic Disorders Caused by Imprinting Errors and Uniparental Disomy.
• Nucleotide repeat expansions and contractions. SeeGenes and Related Disorders Caused by Nucleotide Repeat Expansions and Contractions.
• Apathogenic variant in agene with highly homologous gene family members or apseudogene. SeeGenes and Related Disorders with Highly Homologous Gene Family Members or a Pseudogene(s).

Genetic disorders that may not be recognized during analysis ofexome sequencing due to unexpected inheritance pattern:

• Disorders with incompletepenetrance or variable age of onset (e.g., variant present in an unaffected parent)
• Disorders with previously unreported inheritance patterns (e.g.,autosomal dominant inheritance in a disorder previously reported asautosomal recessive)

Disorders for which associated genes and/or pathogenic variants have not been reported:

• Mendelian disorders associated with multiple unidentified genes
• Disorders caused by pathogenic variants that are not described as disease-associated in the literature or HGMD^®

Disorders that are not known to be genetic:

• Conditions with a non-genetic etiology (e.g., fetal alcohol syndrome)
• Conditions for which there is no known genetic etiology

What variables affect the sensitivity of exome sequencing?

Laboratory-dependent variables. Read depth (sometimes calledexome coverage) and accuracy of base calling

• "Read" refers to the nucleotide sequence generated from the laboratory process of sequencing a segment of DNA or RNA. Read depth refers to the number of times each nucleotide is sequenced. Read depth of anexome can vary significantly because some exons are easier to capture with probes and sequence than others. Read depth can refer to a single nucleotide, but is typically reported as the percentage of nucleotides that are sequenced either an average or minimum number of times (e.g., 30x average read depth for 95% of the exome).
  Exome coverage refers to the number of times each nucleotide is sequenced or the percentage of theexome sequenced an average or minimum number of times (e.g., 95% of exome at ≥20x coverage).
• Accuracy of base calling, the reported nucleotide sequence compared to the actual nucleotide sequence, is measured by the Phred quality score. Phred scores are logarithmically related to nucleotide identification error probability. A Phred score of 10 indicates a one-in-ten chance of an inaccurate nucleotide determination. A Phred score of 20 indicates a one-in-100 chance of an inaccurate nucleotide determination, or a 99% likelihood of correct nucleotide assignment.

Additional laboratory-dependent variables. Sequence enrichment method used to target exons, sequencing technique, and length of sequence generated

• Sequence enrichment method used to target exons: fixed array-based probes versus solution-based probes. Fixed array-based probes were the first method used to capture exons; while newer solution-based probes require less sample DNA, they may not capture regions with low GC content as well as array-based probes.
  Laboratories select probes that will target well-annotated genes associated with genetic conditions, thereby increasing the read depth of these genes. Laboratories frequently update the number of probes used in an assay to include noncoding regions of the genome (e.g., promoters, highly conserved regulatory sequences). Solution-based methods are more adaptable for updates than array-based methods.
• Sequencing technique: paired-end reads (both ends of each DNA fragment are sequenced) versus single-end reads (only one end of a DNA fragment is sequenced). Paired-end reads are better than single-end reads at unambiguously determining alignment of a sequence to the referenceexome, particularly in repetitive regions. However, sequencing of paired-end reads requires more laboratory time and is more expensive.
• Length of sequence generated: longer reads reduce false positives that result from mapping ambiguity better than shorter reads.

Laboratory-dependent variables introduced by analysis of data. Application of filters and analysis of remaining unfiltered variants

• Filters, applied during bioinformatics analysis, are used to select from the large number of variants identified by sequencing those variants that can be reasonably investigated for possible pathogenicity. Filters exclude variants that are unlikely to be disease related based on (a) themode of inheritance inferred from thepedigree, (b) the frequency of a variant in the population, (c) a low Phred score, or (d) the prediction that a variant is non-pathogenic.
• Variant classification guidelines updated by the American College of Medical Genetics and Genomics set forth objective variant classification methods [Richards et al 2015]. Nonetheless, to determine the pathogenicity of every variant identified, molecular and/or clinical geneticists in each laboratory develop their own approach to variant classification, often using the following:
  • Population databases (e.g.,1000 Genomes,ExAC,dbSNP)
  • Curated variant databases (HGVS,locus-specific databases,LOVD,ClinVar)
  • Published literature
  • Unpublished in-house laboratory data
  • In-silico predictive tools

Because the expertise of the molecular geneticist(s) and the data available vary, variant classification, and therefore clinicalsensitivity, are laboratory dependent to some degree.

Laboratory-independent variables. Source of the DNA; GC (guanine-cytosine) content of the region

• The source of DNA (e.g., blood, skin, saliva) affects the quantity and quality of DNA. For example, saliva samples have a lower quantity of DNA and higher contamination rates (e.g., bacterial DNA) than blood and skin samples. Lower DNA quantity will decrease achievable read depth. Higher contamination rates will decrease the accuracy of base calling.
• The GC content of the region (i.e., proportion of guanine [G] and cytosine [C] nucleotides compared to adenine [A] and thymine [T] nucleotides) varies throughout theexome. Regions with high GC content (≥60%) (e.g., first exons, promoters) and low GC content (≤25%) are more difficult to sequence, resulting in decreased coverage of these regions compared to regions with a balanced number of nucleotides [Rieber et al 2013].

When does genome sequencing provide the best test value?

• The clinical features in aproband are suggestive of known genetic conditions that are not included in onemultigene panel or detectable byexome sequencing.
• The clinical features in aproband appear consistent withsomatic mosaicism but are not highly suggestive of a known syndrome.

Benefits and Limitations of Genome Sequencing

Genome sequencing is typically performed bynext-generation sequencing of shearedgenomic DNA. Genome sequencing techniques have nonstandardized, highly variable coverage.

Whilegenome sequencing is significantly more costly thanexome sequencing, it has distinct advantages:

• Simpler sample preparation (no need for sequence enrichment strategies to target coding DNA that results in more even coverage [read depth] across coding regions)
• The ability to identify structural variants andchromosome breakpoints in noncoding regions

The coverage of the genome is less than 100% and varies by laboratory.Telenti et al [2016] sequenced more than 10,000 genomes at a mean read depth of 30-40x (i.e., each DNA fragment was sequenced an average of 30 to 40 times); the authors reported that 91.5% of exons and 95.2% of knownpathogenic variant positions could be sequenced with high confidence. The clinicalsensitivity ofgenome sequencing is unknown.

Althoughgenome sequencing can identify variants outside of the coding regions, most of the confirmed pathogenic variants identified by genome sequencing are within theexome [Taylor et al 2015]. The diagnostic utility ofexome sequencing and genome sequencing (~20%-30%) remains similar. As more noncoding pathogenic variants are identified, the clinicalsensitivity and value of genome sequencing should increase.

What types of disorders can be reliably diagnosed by genome sequencing?

Mendelian disorders caused by:

• Missense ornonsense variants that:
  • Are rare in the population; and
  • Have been previously reported as pathogenic in the literature or HGMD^® (Human Gene Mutation Database)
• Small insertions or deletions (<50 bp) within non-repetitive DNA that:
  • Have been previously reported as pathogenic in the literature; or
  • Disrupt agene reported in HGMD^® (Human Gene Mutation Database)

What types of genetic alterations are not reliably identified by genome sequencing?

Alterations that:

• Influencegene expression without changing DNA sequence (e.g.,imprinting errors,uniparental heterodisomy);
• Are present in a highly repetitive region of DNA that is difficult to sequence (e.g.,nucleotide repeat expansions and contractions);
• Involve agene that is highly homologous to other gene family members or apseudogene;
• Are present in mitochondrial DNA, not nuclear DNA;
• Are somatic mosaic changes (i.e., the genetic change is present in a small percentage of cells and absent in a large percentage of cells); thus, either base calls do not pass quality thresholds or the genetic change was not present in the cells from which the DNA was extracted.

What types of disorders are not reliably identified by genome sequencing?

Disorders caused by genetic alterations that are not identified ongenome sequencing because of technical limitations:

• Imprinting errors. SeeGenetic Disorders Caused by Imprinting Errors and Uniparental Disomy.
• Uniparental heterodisomy. SeeGenetic Disorders Caused by Imprinting Errors and Uniparental Disomy. Note: Uniparental isodisomy may be identified ongenome sequencing as long stretches of homozygosity.
• Nucleotide repeat expansions and contractions. SeeGenes and Related Disorders Caused by Nucleotide Repeat Expansions and Contractions.
• Apathogenic variant in agene with highly homologous gene family members or apseudogene. SeeGenes and Related Disorders with Highly Homologous Gene Family Members or a Pseudogene(s).

Disorders for which associated genes and/or pathogenic variants have not been reported:

• Mendelian disorders associated with multiple unidentified genes
• Disorders caused by pathogenic variants that are not described as disease-associated in the literature or HGMD^®

Disorders that are not known to be genetic:

• Conditions with a non-genetic etiology (e.g., fetal alcohol syndrome)
• Conditions for which there is no known genetic etiology

Advantages of Multigene Panels over Exome Sequencing and Genome Sequencing

Clinicalsensitivity (the ability to identify pathogenic variants causative of known clinical disorders) can be superior.

• The sequences of genes included in amultigene panel have been specifically targeted and validated by the laboratory, whereasexome sequencing andgenome sequencing are notgene specific. The design of multigene panels achieves the following:
  • Increases confidence in complete sequencing of agene of interest
  • Enables monitoring of sequence performance over time in the region of interest, thus providing highersensitivity for detecting somatic mosaic variants
  • Identifies variants within targeted noncoding regions (that may be missed onexome sequencing)
• A multigene panels can be designed to include additional assays; for example:
  • Deletion/duplication assays to detect deletions and duplications too large to be identified with sequencing;
  • Unique sequencing assays to distinguish specific genes from their highly homologous pseudogenes; seeGenes and Related Disorders with Highly Homologous Gene Family Members or a Pseudogene(s).

Results can be easier to analyze. Because fewer genes are sequenced, fewer variants will be identified. Therefore, multigene panels often have the following advantages:

• Faster turnaround time
• Lower cost
• No incidental findings (identification of pathogenic variants in genes that do not account for the patientphenotype that prompted the diagnostic testing)
• No routine requirement of parental testing for interpretation of test results. Note: Parental samples are required to further evaluate variants ofuncertain significance.

Advantages of Exome Sequencing or Genome Sequencing over Multigene Panels

Exome sequencing andgenome sequencing do not require the clinician to determine which disorders (and, hence, which genes) are likely to be involved; thus, testing can be ordered earlier in a patient’s diagnostic evaluation because extensive clinical evaluations, laboratory testing, and radiographic evaluations are not needed to identify diagnostic clues that would lead the clinician to suspect a specific disorder(s).

Exome sequencing andgenome sequencing can detect the presence of two or more genetically distinct disorders (the phenotypic presentation of which may have complicated diagnosis) in the same individual [Yang et al 2013,Adams et al 2014].

Using amultigene panel forces the clinician to select the best panel for the patient. Selection is often difficult because:

• The less well defined the patient’sphenotype, the more difficult it is to identify the most appropriatemultigene panel;
• Genes for rare disorders or newly discovered genes may not be included in amultigene panel;
• The testing method required to detect variants (e.g.,exon or whole-gene deletions) commonly observed in some disorders may not be utilized in a givenmultigene panel;
• The clinicalsensitivity (which can vary widely among multigene panels) is not provided for some panels;
• Laboratories with multigene panels comprising very similar lists of genes may manage variants ofuncertain significance differently, potentially causing a substantial clinical burden in interpretation (e.g., testing additional family members to clarify the result), andgenetic counseling (e.g., clarifying the difference between apathogenic variant and a variant of uncertain significance). For example:
  • Laboratories may not reveal the probability of identifying a variant ofuncertain significance, a factor to consider for large multigene panels for which the probability of identifying a variant of uncertain significance can exceed 75%;
  • Laboratories may not include variants ofuncertain significance in the test result provided to the ordering clinician.

Background

Achromosomal microarray (CMA) is a molecular genetic test used to detect copy number variants (CNVs), i.e., deletions (loss) or duplications (gain) of chromosomal material. CNVs range in size from approximately one kilobase (kb) to multiple megabases (Mb), with the largest CNVs resulting in a loss or gain of an entirechromosome, or multiple chromosomes (such as ahaploid set of 23 chromosomes). Depending on the size andgenomic location of a CNV, thedeletion orduplication may include no known genes, onegene, or many genes. CNVs may be benign, pathogenic, or of uncertain clinical significance.

Prior to the development of CMA, detection of CNVs was limited to what could be seen on high-resolutionkaryotype analysis (i.e., deletions as small as three to five Mb and duplications larger than approximately five Mb). Identification of smaller CNVs usingfluorescent in situ hybridization (FISH) analysis required the clinician to determine thechromosome region of interest. In contrast, CMA can detect CNVs smaller than those identified with high-resolution karyotype analysis, and the clinician does not need to determine a region of interest. CMA, which has been available as a clinical diagnostic test since 2004, is recommended as a first-line test for individuals with developmental delay, intellectual disability, multiplecongenital anomalies, and/or autism spectrum disorder. For these disorders, the diagnostic yield of CMA (15%-20%) is greater than that of karyotype analysis (~3%) [Manning et al 2010,Miller et al 2010].

Thesensitivity of CMA depends on the following:

• Region of the genome covered by the probes selected
• Number of probes used
• Spacing (density) of the probes

CMA Compared to Karyotype Analysis

Advantages of CMA compared tokaryotype analysis

• CMA can detect smaller deletions and duplications than those visible onkaryotype analysis.
• CMA analysis can be targeted to a specificgene, region(s) of the genome, or exons of disease-related genes to decrease the chance of detecting a variant ofuncertain significance. (SeeTypes of CMA.)
• CMA can be performed more quickly and on a wider variety of samples thankaryotype analysis because CMA usesisolated DNA rather than cultured cells, and the process of CMA analysis requires less manual analysis than evaluating a karyotype.

Limitations of CMA compared tokaryotype analysis

• CMA cannot detect balancedchromosome rearrangements (e.g., balanced translocations, inversions).
• CMA cannot determine thegenomic location of a duplicated sequence. While most duplications occur in tandem [Newman et al 2015], a minority are inverted duplications or insertions (i.e., a duplicated CNV is inserted into another location in the genome). To determine the location and orientation of aduplication, other methods such asFISH orgenome sequencing must be used.

Determining Pathogenicity of a CNV

The American College of Medical Genetics and Genomics (ACMG) and the Clinical Genome Resource (ClinGen) have recently introduced a technical standard for interpretation of CNVs using an evidence-based scoring system [Riggs et al 2020]. This guidance considers several factors when evaluating the potential pathogenicity of a CNV detected by CMA [Miller et al 2010] including:

• Gene content. CNVs containing one or more disease-related genes may be pathogenic. The effect of a CNV that does not include known genes is difficult to predict.
• Size. Larger CNVs are more likely to be pathogenic. However, at least 1% of unaffected individuals have a CNV >1 Mb [Itsara et al 2009].
• Presence of the CNV in affected individuals. A similar or overlapping CNV in another affected individual supports pathogenicity of the CNV.
• Presence of the CNV in population databases. A CNV that is frequently identified in unaffected individuals is less likely to be pathogenic.
• Inheritance. Ade novo CNV in a severe condition that tends to affect only one family member is more likely to be pathogenic than a CNV inherited from an unaffected parent. Conversely, inherited CNVs may be pathogenic, which can be confirmed bysegregation analysis (i.e., targeted testing of the CNV in additional family members to determine if the CNV is segregating with the disorder).

Common characteristics of pathogenic orlikely pathogenic CNVs

• Arecurrent deletion orduplication known to be disease-related and consistent with the affected individual'sphenotype (seeTable 1). The breakpoints of recurrent CNVs are the same in unrelated individuals as the result ofnonallelic homologous recombination.
• A nonrecurrentdeletion orduplication previously associated with the affected individual'sphenotype. The breakpoints of nonrecurrent CNVs are different and may be overlapping in unrelated individuals.
• Adeletion involving a known disease-relatedgene for which loss of function (haploinsufficiency) is the disease mechanism
• A large,de novodeletion encompassing multiple genes

Common characteristics of CNVs ofuncertain significance

• Aduplication involving a known disease-relatedgene in which pathogenic variants causehaploinsufficiency
• Adeletion involving a known disease-relatedgene in which pathogenic variants cause gain of function
• Aheterozygousdeletion of a disease-relatedgene for anautosomal recessive disorder in an individual who does not have a secondpathogenic variant identified in the disease-related gene and/or does not have features suggestive of the autosomal recessive disorder

Common characteristics of benign orlikely benign CNVs

• A CNV that is frequent in the general population
• A CNV that is inherited from an unaffected parent, unless the CNV causes a disorder known to have reducedpenetrance

Limitations of CMA

Pathogenic variants that cannot be reliably detected regardless of CMA platform

• Single-nucleotide variants
• Small (<1000 base-pair) insertions or deletions
• Nucleotide repeat expansions
• Balancedchromosome rearrangements, including inversions and balanced translocations
• Methylation defects
• Some supernumerary chromosomes, particularly those primarily containing heterochromatin

Types of CMA

Genome-wide CMAs interrogate the entire genome for CNVs as small as 100 kb. Probes cover the genome with an increased number and density overchromosome regions associated with known microdeletions/microduplications (Table 1).

Exon-focusedCMAs detect CNVs that involve one or more exons. A high number of densely spaced probes cover eachexon, increasing the resolution of the CMA for expressed genes.

Customized CMAs detect CNVs within a specific region of interest, either intra- or inter-genic, using a high number of densely spaced probes that cover a specificgenomic region.

Note: All CMAs have genome-wide probe coverage, although the coverage may be minimal, to allow for quality control and data analysis.

The most common CMA platforms:

• Oligonucleotide array comparative genomic hybridization (oligo aCGH)
• Single-nucleotide polymorphism genotyping array (SNP array)
• Oligo/SNP combination array

Oligonucleotide Array Comparative Genomic Hybridization

Oligonucleotide arraycomparative genomic hybridization (oligo aCGH) detects differences in DNA content (copy number) between two individuals, usually an affected individual and a healthy control. DNA from an affected individual is fluorescently labeled with one dye; DNA from a healthy control is labeled with a different dye. The DNA samples are co-hybridized to an array in which hundreds of thousands of oligonucleotide probes are attached to the surface. After time to allow hybridization, the excess DNA is washed off, and the fluorescent signals are measured from each dye at each oligonucleotide. The fluorescence intensity of hybridized DNA from an affected individual and fluorescence intensity of hybridized DNA from the healthy control are measured, and the ratio of the fluorescence intensity for each dye is plotted on a log₂ scale.

A log₂ ratio of zero indicates a normal DNA copy number in the affected individual, whereas a reduced log₂ ratio indicates adeletion, and an increased log₂ ratio indicates aduplication (seeFigure 1). Because a single oligonucleotide probe with an aberrant log₂ ratio may represent laboratory artifact, several adjacent oligonucleotide probes with the same deviation are required to confirm the presence of a CNV. The number of adjacent probes required to confirm the presence of a CNV is determined by the laboratory performing the test. Due to the comparative nature of the analysis, same-sex control are used and ploidy abnormalities cannot be detected.

Figure 1.

Oligo aCGH example of a heterozygous deletion and a heterozygous duplication Segment of an oligo aCGH showing a plot of the ratio fluorescence intensity. A chromosome region with a heterozygous deletion shows several adjacent probes with decreased fluorescent(more...)

Single-Nucleotide Polymorphism Genotyping Array

Single-nucleotidepolymorphismgenotyping arrays (SNP arrays) determine thegenotype of an individual at selected singlebase pair sites in that person's genome. These single base pair sites are selected because they are likely to be polymorphic (i.e., the nucleotide at the site varies among individuals). Typically, at each polymorphic site (SNP), there are two possible alleles: the major (or reference)allele referred to as the "A" allele, and the minor (non-reference) allele referred to as the "B" allele. At each SNP, an individual may behomozygous for the reference allele (AA), a compoundheterozygote for the reference allele and the non-reference allele (AB), or homozygous for the non-reference allele (BB).

Similar to oligo aCGH, SNP arrays also rely on fluorescence-based visualization ofgenomic DNA bound to oligonucleotide probes fixed to an array. However, rather than the comparative hybridization of two samples used in oligo aCGH, SNP arrays hybridize DNA fragments from the affected individual's sample in anallele-specific manner. The "A" allele is labeled with one fluorescent signal and the "B" allele is labeled with a different fluorescent signal.

The two pieces of information gathered for each SNP (seeFigure 2):

Figure 2.

SNP array example of a heterozygous deletion and a heterozygous duplication Each dot represents the B-allele frequency and total fluorescence intensity for a single SNP. Predicted genotypes of SNPs as measured by B-allele frequency are shown in red font.(more...)

1.

Therelative fluorescence intensity for the two alleles at each site, which represents the allelic ratio, referred to asB-allele frequency. Most of the genome is diploid (eachchromosome and thus each allele is present in two copies); therefore, an individual will have an "AA," "AB," or "BB"genotype at each SNP, and the B-allele frequency will be 0, 0.5 or 1, respectively. If the SNP is in a deleted region, the genotype (i.e., "A" or "B") will appearhomozygous (i.e., "AA" or "BB"), with a B-allele frequency of 0 or 1, respectively. If the SNP is in a region of aduplication, the possible genotypes for each SNP include: "AAA," "AAB," "ABB," or "BBB" with a B-allele frequency of 0, 0.3, 0.6, or 1, respectively.

2.

Thetotal fluorescence intensity indicates the number of alleles at a specific SNP in an individual. The data are normalized using external control samples and plotted on a log₂ scale. An individual with two alleles at a specific SNP will have a log₂ ratio of zero. An individual with aheterozygousdeletion that includes the SNP will have a reduced log₂ ratio. An individual with a heterozygousduplication including the SNP will have an increased log₂ ratio.

CNVs are identified using a combination of the B-allele frequency and total fluorescence intensity of adjacent SNPs; several adjacent SNPs with the same deviation are required to confirm the presence of a CNV.

Oligo/SNP Combination Array

Oligo/SNP combination arrays use an oligo aCGH platform that includes both oligonucleotide probes to identify CNVs and probes for select SNPs. The number (and therefore the density) of SNP probes is usually much lower in combination arrays than in SNPgenotyping arrays. However, the inclusion of SNP probes allows for the detection ofuniparental isodisomy and large stretches of copy-neutral homozygosity (seeOligo aCGH vs SNP Array).

Oligo aCGH vs SNP Array: Advantages of SNP Arrays

SNP arrays can detect regions of copy-neutral homozygosity (regions of the genome that are diploid and identical). In stretches of copy-neutral homozygosity, all SNPs arehomozygous ("AA" or "BB"), but the total fluorescence intensity is at the same level as diploid regions of the genome (seeFigure 3). Identification of regions of copy-neutral homozygosity may help identify:

Figure 3.

SNP array example of copy-neutral homozygosity Each dot represents the B-allele frequency and total fluorescence intensity for a single SNP. Predicted genotypes of SNPs as measured by B-allele frequency are shown in red font. The lower case letters (a,(more...)

• Uniparental isodisomy (i.e., two copies of a singlechromosome or chromosome segment are inherited from one parent and no copy is inherited from the other parent).). A region of homozygosity limited to one chromosome pair or chromosome segment can be detected bySNP array in individuals withuniparental isodisomy.
  Completeuniparental heterodisomy (i.e., both chromosomes of achromosome pair or chromosome segment are inherited from one parent and no copy is inherited from the other parent) is not detectable bySNP array because heterodisomy will result inheterozygous SNPs and no regions of homozygosity.
• Parental relatedness. SNP arrays can identify an excess of homozygosity in aproband usually indicating parentalconsanguinity, which is often known, or revealing incest / potential abuse. Region(s) of homozygosity can help narrow the search for disease-causing genes particularly in individuals from highlyconsanguineous populations [Alabdullatif et al 2017].

SNP arrays can detect a lower level ofmosaicism than oligo aCGH. SNP arrays can detect mosaicism for CNVs present in ≥5% of the cells tested including gain or loss of a wholechromosome (i.e.,aneuploidy) (seeFigure 4) [Conlin et al 2010]. Oligo aCGH is slightly less sensitive, detecting mosaicism present in ≥10%-20% of cells tested.

Figure 4.

SNP array example of mosaic deletion Each dot represents the B-allele frequency and total fluorescence intensity for a single SNP. Predicted genotypes of SNPs as measured by B-allele frequency are shown in red font. The lower-case letters (a, b) below(more...)

SNP array can detect polyploidy (e.g., triploidy) which cannot be reliably detected by oligo aCGH as the presence of three fluorescence intensity ratios are normalized.

Oligo aCGH vs SNP Array: Limitations of SNP Arrays

SNP arrays are more difficult to customize than oligo arrays because some regions of the genome are less variable than others. For example, exons are less likely to have nucleotides that vary among individuals. In fact, some exons do not have any variable nucleotides. As oligo aCGH does not require variability for its probes, oligo probes can cover exons that are identical among most individuals.