Kernel driver max20730¶
Supported chips:
Maxim MAX20710
Prefix: ‘max20710’
Addresses scanned: -
Datasheet:https://datasheets.maximintegrated.com/en/ds/MAX20710.pdf
Maxim MAX20730
Prefix: ‘max20730’
Addresses scanned: -
Datasheet:https://datasheets.maximintegrated.com/en/ds/MAX20730.pdf
Maxim MAX20734
Prefix: ‘max20734’
Addresses scanned: -
Datasheet:https://datasheets.maximintegrated.com/en/ds/MAX20734.pdf
Maxim MAX20743
Prefix: ‘max20743’
Addresses scanned: -
Datasheet:https://datasheets.maximintegrated.com/en/ds/MAX20743.pdf
Author: Guenter Roeck <linux@roeck-us.net>
Description¶
This driver implements support for Maxim MAX20710, MAX20730, MAX20734, and MAX20743Integrated, Step-Down Switching Regulators with PMBus support.
The driver is a client driver to the core PMBus driver.Please see Documentation/hwmon/pmbus.rst for details on PMBus client drivers.
Usage Notes¶
This driver does not auto-detect devices. You will have to instantiate thedevices explicitly. Please see Documentation/i2c/instantiating-devices.rst fordetails.
Sysfs entries¶
| curr1_crit | RW/RO | Critical output current. Please see datasheet forsupported limits. Read-only if the chip iswrite protected; read-write otherwise. |
| curr1_crit_alarm | RO | Output current critical alarm |
| curr1_input | RO | Output current |
| curr1_label | RO | ‘iout1’ |
| in1_alarm | RO | Input voltage alarm |
| in1_input | RO | Input voltage |
| in1_label | RO | ‘vin’ |
| in2_alarm | RO | Output voltage alarm |
| in2_input | RO | Output voltage |
| in2_label | RO | ‘vout1’ |
| temp1_crit | RW/RO | Critical temeperature. Supported values are 130 or 150degrees C. Read-only if the chip is write protected;read-write otherwise. |
| temp1_crit_alarm | RO | Temperature critical alarm |
| temp1_input | RO | Chip temperature |