Description¶

This driver implements support for the Analog Devices ADT7411 chip. There maybe other chips that implement this interface.

The ADT7411 can use an I2C/SMBus compatible 2-wire interface or anSPI-compatible 4-wire interface. It provides a 10-bit analog to digitalconverter which measures 1 temperature, vdd and 8 input voltages. It has aninternal temperature sensor, but an external one can also be connected (oneloses 2 inputs then). There are high- and low-limit registers for all inputs.

Check the datasheet for details.

sysfs-Interface¶

Besides standard interfaces, this driver adds (0 = off, 1 = on):

adc_ref_vdd	Use vdd as reference instead of 2.25 V
fast_sampling	Sample at 22.5 kHz instead of 1.4 kHz, but drop filters
no_average	Turn off averaging over 16 samples

Notes¶

SPI, external temperature sensor and limit registers are not supported yet.