Kernel driver tmp421¶
Supported chips:
Texas Instruments TMP421
Prefix: ‘tmp421’
Addresses scanned: I2C 0x2a, 0x4c, 0x4d, 0x4e and 0x4f
Datasheet:http://focus.ti.com/docs/prod/folders/print/tmp421.html
Texas Instruments TMP422
Prefix: ‘tmp422’
Addresses scanned: I2C 0x4c, 0x4d, 0x4e and 0x4f
Datasheet:http://focus.ti.com/docs/prod/folders/print/tmp421.html
Texas Instruments TMP423
Prefix: ‘tmp423’
Addresses scanned: I2C 0x4c and 0x4d
Datasheet:http://focus.ti.com/docs/prod/folders/print/tmp421.html
Texas Instruments TMP441
Prefix: ‘tmp441’
Addresses scanned: I2C 0x2a, 0x4c, 0x4d, 0x4e and 0x4f
Datasheet:https://www.ti.com/product/tmp441
Texas Instruments TMP442
Prefix: ‘tmp442’
Addresses scanned: I2C 0x4c and 0x4d
Datasheet:https://www.ti.com/product/tmp442
Authors:
Andre Prendel <andre.prendel@gmx.de>
Description¶
This driver implements support for Texas Instruments TMP421, TMP422,TMP423, TMP441, and TMP442 temperature sensor chips. These chipsimplement one local and up to one (TMP421, TMP441), up to two (TMP422,TMP442) or up to three (TMP423) remote sensors. Temperature is measuredin degrees Celsius. The chips are wired over I2C/SMBus and specifiedover a temperature range of -40 to +125 degrees Celsius. Resolutionfor both the local and remote channels is 0.0625 degree C.
The chips support only temperature measurement. The driver exportsthe temperature values via the following sysfs files:
temp[1-4]_input
temp[2-4]_fault