You signed in with another tab or window.Reload to refresh your session.You signed out in another tab or window.Reload to refresh your session.You switched accounts on another tab or window.Reload to refresh your session.Dismiss alert
Controls rebooting of APC network PDU switches with 'telnet' network interface.Tested with the AP7900, but likely works with other models.
This handles locking of the device so that parallel calls will block, sinceAPC has a single telnet session.
Requirements
Python 2.x or Python 3.x
Python Expect (pexpect) library. To install: 'pip install pexpect'
APC with telnet network interface (tested on AP7900)
Installation
$ pip install git+https://github.com/scls19fr/APC
or
Download source and run
$ python setup.py install
The APC needs to be set up with telnet enabled, and using a fixed IP address.If a DHCP address is used, it may change, and you will have trouble connecting.
Usage
Display help
$ apc --helpusage: apc [-h] [--host HOST] [--user USER] [--password PASSWORD] [-v] [--quiet] [--debug] [--reboot OUTLET] [--off OUTLET] [--on OUTLET] [--cli CLI] [--delay DELAY] [--duration DURATION] [--status]APC Python CLIoptional arguments: -h, --help show this help message and exit --host HOST Override the host --user USER Override the username --password PASSWORD Override the password -v, --verbose Verbose messages --quiet Quiet --debug Debug mode --reboot OUTLET Reboot an outlet --off OUTLET Turn off an outlet --on OUTLET Turn on an outlet --cli CLI command line to execute 'ssh {user}@{host}' or 'telnet {host} --delay DELAY delay before on/off (-1 to 7200 sec, where -1=Never) --duration DURATION reboot duration (5 to 60 sec) --status Status of outlets
Outlet status
$ apc --statusAcquiring lock /tmp/apc.lockConnecting to APC @ 10.8.0.142Logged in as user apc, version 3.9.2Outlet 1 NAS ONOutlet 2 OFFOutlet 3 ONOutlet 4 ONOutlet 5 ONOutlet 6 ONOutlet 7 ONOutlet 8 ONDISCONNECTED from 10.8.0.142
Power cycle (reboot) a single port
Immediate
$ apc --reboot PORT
Example: reboot power port 8
$ apc --reboot 8Acquiring lock /tmp/apc.lockConnecting to APC @ 10.8.0.142Logged in as user apc, version 3.9.2APC 10.8.0.142: Outlet #8 RebootedDISCONNECTED from 10.8.0.142
Delayed reboot with duration
Example: reboot power port 4
$ apc --reboot 4 --delay 30 --duration 10
Power off a single port
Immediate
Example: power off port 4
$ apc --off 4
Delayed power off
Example: power off port 4 30 seconds later
$ apc --off 4 --delay 30
Environment Variables
The following environment variables will override the APC connection:
