Build and Install

$ make config T=x86_64-native-linuxapp-gcc$ make install T=x86_64-native-linuxapp-gcc$ export RTE_SDK=/home/mytest/dpdk$ export RTE_TARGET=x86_64-native-linuxapp-gcc

$ git clone https://github.com/ansyun/dpdk-ans.git$ export RTE_ANS=/home/mytest/dpdk-ans$ ./install_deps.sh$ cd ans$ make$ sudo ./build/ans -c 0x2 -n 1  -- -p 0x1 --config="(0,0,1)"EAL: Detected lcore 0 as core 0 on socket 0EAL: Detected lcore 1 as core 1 on socket 0EAL: Support maximum 128 logical core(s) by configuration.EAL: Detected 2 lcore(s)EAL: VFIO modules not all loaded, skip VFIO support...EAL: Setting up physically contiguous memory...EAL: Ask a virtual area of 0x400000 bytesEAL: Virtual area found at 0x7fdf90c00000 (size = 0x400000)EAL: Ask a virtual area of 0x15400000 bytes

$ git clone https://github.com/ansyun/dpdk-iperf.gitdpdk-iperf3 process run on ANS tcp/ip stack.iperf3 process run on linux kernel tcp/ip stack.You may one of below command to compile dpdk-iperf$ make all // make dpdk-iperf3 and iperf3$ make dpdk-iperf // make dpdk-iperf3 $ make iperf // make iperf3

/dpdk-iperf# ./dpdk_iperf3 -s --bind 10.0.0.2EAL: Detected 40 lcore(s)EAL: Detected 2 NUMA nodesEAL: Multi-process socket /var/run/dpdk/rte/mp_socket_39587_4958d65583aec4EAL: Probing VFIO support...USER8: LCORE[-1] anssock any lcore id 0xffffffffUSER8: LCORE[10] anssock app id: 39587USER8: LCORE[10] anssock app name: dpdk_iperf3USER8: LCORE[10] anssock app lcoreId: 10USER8: LCORE[10] mp ops number 4, mp ops index: 0USER8: LCORE[10] setsockopt: not support optname 2-----------------------------------------------------------Server listening on 5201-----------------------------------------------------------fcntl(F_GETFL): Bad file descriptorAccepted connection from ::2300:0:0:0, port 44544An unknown state was sent by the client, ignoring it.fcntl(F_GETFL): Bad file descriptor[2036] local :: port 5201 connected to :: port 44546[ ID] Interval           Transfer     Bandwidth[2036]   0.00-1.00   sec  1.05 GBytes  9.03 Gbits/sec[2036]   1.00-2.00   sec  1.10 GBytes  9.41 Gbits/sec[2036]   2.00-3.00   sec  1.10 GBytes  9.41 Gbits/sec[2036]   3.00-4.00   sec  1.10 GBytes  9.41 Gbits/sec[2036]   4.00-5.00   sec  1.10 GBytes  9.41 Gbits/sec[2036]   5.00-6.00   sec  1.10 GBytes  9.41 Gbits/sec[2036]   6.00-7.00   sec  1.10 GBytes  9.41 Gbits/sec[2036]   7.00-8.00   sec  1.10 GBytes  9.41 Gbits/sec[2036]   8.00-9.00   sec  1.10 GBytes  9.41 Gbits/sec[2036]   9.00-10.00  sec  1.10 GBytes  9.41 Gbits/sec[2036]  10.00-10.04  sec  40.9 MBytes  9.41 Gbits/sec- - - - - - - - - - - - - - - - - - - - - - - - -[ ID] Interval           Transfer     Bandwidth[2036]   0.00-10.04  sec  0.00 Bytes  0.00 bits/sec                  sender[2036]   0.00-10.04  sec  11.0 GBytes  9.38 Gbits/sec                  receiverAn unknown state was sent by the client, ignoring it.USER8: LCORE[10] setsockopt: not support optname 2-----------------------------------------------------------Server listening on 5201-----------------------------------------------------------

/dpdk-iperf# ./iperf3 -c 10.0.0.2Connecting to host 10.0.0.2, port 5201[  5] local 10.0.0.10 port 44546 connected to 10.0.0.2 port 5201[ ID] Interval           Transfer     Bandwidth       Retr  Cwnd[  5]   0.00-1.00   sec  1.09 GBytes  9.39 Gbits/sec    0    694 KBytes[  5]   1.00-2.00   sec  1.10 GBytes  9.41 Gbits/sec    0    694 KBytes[  5]   2.00-3.00   sec  1.10 GBytes  9.41 Gbits/sec    0    694 KBytes[  5]   3.00-4.00   sec  1.10 GBytes  9.41 Gbits/sec    0    694 KBytes[  5]   4.00-5.00   sec  1.09 GBytes  9.41 Gbits/sec    0    694 KBytes[  5]   5.00-6.00   sec  1.10 GBytes  9.42 Gbits/sec    0    694 KBytes[  5]   6.00-7.00   sec  1.10 GBytes  9.41 Gbits/sec    0    694 KBytes[  5]   7.00-8.00   sec  1.10 GBytes  9.41 Gbits/sec    0    694 KBytes[  5]   8.00-9.00   sec  1.10 GBytes  9.41 Gbits/sec    0    694 KBytesAn unknown state was sent by the client, ignoring it.[  5]   9.00-10.00  sec  1.10 GBytes  9.41 Gbits/sec    0    694 KBytes- - - - - - - - - - - - - - - - - - - - - - - - -[ ID] Interval           Transfer     Bandwidth       Retr[  5]   0.00-10.00  sec  11.0 GBytes  9.41 Gbits/sec    0             sender[  5]   0.00-10.00  sec  11.0 GBytes  9.41 Gbits/sec                  receiveriperf Done.

Notes

Support