Repository files navigation

Please refer tohttps://www.rowanhick.com/motion-simulator

A DIY Open source design for a high performance 'G-Seat' that provides motion cueing for simulators. Turn left and the right hand panels push against you, accelerate and both back panels push against you.

Comprised of 8 folded aluminium brackets + panels, mechanical components and 4 AC Servos

Needs motion control software + controllers to work - I use and recommend SimFeedbackhttps://opensfx.com

There will be actual build guides when I've cleaned all the files up and have a bit more time. At this point you really need to know what you're doing so I'm intentionally setting a "barrier for entry" by being suitably light on detail.

Review my blog articles up above in particular this one :https://www.rowanhick.com/2020/06/10/steelys-g-seat-milestone-reached-all-functions-working

I really, really, don't want anyone thinking this is going to be a cakewalk - or is absolutely 100% proven, going off and building one, then having issues - and blame me because they feel like they've lit $4000-5000NZD on fire. There's a lot of dollars in components and so far only I've built one. I've documented what I know to date the issues are herehttps://github.com/RowanH/g-seat/issues

No warranties are given express or implied. (refer to license here :https://www.rowanhick.com/2020/03/05/steelys-g-seat-copyright-open-source-license)

This is the ALPHA release of files, there was still quite a lot of manual work from these files to getting them working in my rig (it wasn't a straight bolt on exercise).This is not intended to be a ready to go DIY kit. Please check the issues log and make sure you've joined my discordhttps://discord.gg/ZVkz2tC so you'refully prepared before embarking on build one of these. It's a lot of money to get it wrong. This has only been tested for someone 6ft high, 75kg. Anatomy will play a big part how much you need to modify the design.

This could hurt you, remove a finger, or cause you a nasty electric shock. You've been warned.

If you think it's cool and want to say thanks then paypal a donation for beer money or fun tools in the shed togseatworkshop@gmail.com

Coming soon

2020 Rowan Hick (@SteelyEyedMissleman, or @Steely for short)Please read my intention/statement herehttps://www.rowanhick.com/2020/03/05/steelys-g-seat-copyright-open-source-license

And refer to the full version of license wording herehttps://github.com/RowanH/g-seat/blob/alpha/LICENSE.md

The license is extremely permissive, it's main requirements are that (a) you've got to include the same license in any derivative design (b) that you also have to share your derivative design(s) and (c) you've got to attribute (Credit) my original design regardless of where you use it. Simple.

You must say "@Steely's G-Seat" and include a link tohttps://www.rowanhick.com/motion-simulator that's an express requirement of the license.

So for instance if you were to sell this commercially (brave, brave person) on your product page you must say

.... your product copy .... "uses @Steely's G-Seat designhttps://www.rowanhick.com/motion-simulator"

Youcan't pass this off as your own design without credit. You also must include the license verbatim.

If you modify the design in any form youmust include this same license and youmust provide open source files.

So you can't take the design, tweak something, call it your own and not provide files.