Hi,I'm using Ubuntu and I need to program pic 16f877 for my course . Idownloaded piklab and when I connect the pic from usb nothing happened...
Hi,I'm using Ubuntu and I need to program pic 16f877 for my course . Idownloaded piklab and when I connect the pic from usb nothing happened i.eUbuntu didn't see the PIC. How can I solve this problem?Thanx, P. ---------------------------------------Posted through http://www.EmbeddedRelated.com
Dear all i want to install a small or embedded os on the main board,via'sEPIA http://www.via.com.tw/en/products/mainboards/ i have...
Dear all i want to install a small or embedded os on the main board,via'sEPIA http://www.via.com.tw/en/products/mainboards/ i have installed desktop-like ubuntu and netbsd both with x windowon it (start x successfully not yet in netbsd ) ubuntu has most hardware supports both need 256 mb ~ 512 mb without any kernel tuning or packageslimming I need a os with software d...
Dear all i want to install a small or embedded os on the main board,via'sEPIA http://www.via.com.tw/en/products/mainboards/ i have...
Dear all i want to install a small or embedded os on the main board,via'sEPIA http://www.via.com.tw/en/products/mainboards/ i have installed desktop-like ubuntu and netbsd both with x windowon it (start x successfully not yet in netbsd ) ubuntu has most hardware supports both need 256 mb ~ 512 mb without any kernel tuning or packageslimming I need a os with software d...
This is kind of off-topic, but maybe someone has an answer.I use a laptop running Ubuntu for giving presentations, and my latest...
This is kind of off-topic, but maybe someone has an answer.I use a laptop running Ubuntu for giving presentations, and my latest presentation involves talking to a Luminary LM8S311 evaluation board to give a demonstration.This works fine on Windows XT -- connects right up, and I can do damage from the comfort of my chair. But the laptop (running Ubuntu 8.04) doesn't see the FTDI c...
Hi,I program on Ubuntu 12.04, 32bit for some ARM projects. On Ubuntu, a Linaro toolchain works well for some time. Recently, I begin to write...
Hi,I program on Ubuntu 12.04, 32bit for some ARM projects. On Ubuntu, a Linaro toolchain works well for some time. Recently, I begin to write NEON code. Some on line code uses uint16x8_t, uint32x4_t etc. Although the project can build, the eclipse complains these variables unresolved. I have tried many settings on eclipse, but I fail.One on line snippet uses header wit
I'm about 1/5 in terms of being a Linux guru, trying to install a Segger JTAG interface on an x86 machine running Ubuntu 12.04LTS. The very...
I'm about 1/5 in terms of being a Linux guru, trying to install a Segger JTAG interface on an x86 machine running Ubuntu 12.04LTS. The very first step of the 'procedure in README.txt document from the download tarball has stopped me dead, the very first instruction is to enter apt-get -update on the command line. I entered:sudo apt-get -update , and get the following error:
It is time to upgrade my Fedora cross-development host machine.But before I do --Is Ubuntu suitable for use as a cross-development host,...
It is time to upgrade my Fedora cross-development host machine.But before I do --Is Ubuntu suitable for use as a cross-development host, or should Istick with Fedora?Any other recommendations?Thanks.Jim
Hi, Can anyone point me to some straightforward info re the above? The Altera site installation pages aren't particularly clear, and none of the...
Hi, Can anyone point me to some straightforward info re the above? The Altera site installation pages aren't particularly clear, and none of the links in the forums actually get me to anything useful, it's mostly comments saying how awful the process is. TIA
This is like going from dos to mac...apt-get no longer, yum now. man yum sounds very suspicious. I gotCentos 5 installed today, can anyone...
This is like going from dos to mac...apt-get no longer, yum now. man yum sounds very suspicious. I gotCentos 5 installed today, can anyone tell me how to get the packagemanager working through a proxy?
I've always been interested in low power PCs, and found this.http://librenix.com/?inode=11001even a telnet game at the bottom of that...
I've always been interested in low power PCs, and found this.http://librenix.com/?inode=11001even a telnet game at the bottom of that pageNot exactly embedded, but 8 watts, Just wondering if if there are other lower powered PCs around (cheap)that can be recommended?Martin
Hello to all,I'm sorry if my English is not so good.I want to develop applications for embedded boards (such as Beagle Board) using the QT...
Hello to all,I'm sorry if my English is not so good.I want to develop applications for embedded boards (such as Beagle Board) using the QT libraries in C++.Also I need to use QT for desktop applications.As far as I know, I need the QT-embedded for the first case.I use Eclipse IDE with the QT plugin. I run them either under Windows XP or under Ubuntu.I have also the toolchai...
HiI would like to know if there is a guide, or someone could explain me,which are the steps to configure the MSP-FET430UIF (U80) in...
HiI would like to know if there is a guide, or someone could explain me,which are the steps to configure the MSP-FET430UIF (U80) in Ubuntu.I have the mspgcc compiler working, so I generetad a .o and .elf filesfrom a basic source code, but I had no luck downloading the code to theMCU.I tried to use msp430-gdb but my software never worked.Is someone familiar to what Im doing? If someo...
I have just mounted this on an IBM Thinkpad T30. It is driving meup the wall. Problems:1. Lack of keyboard alternatives for routine...
I have just mounted this on an IBM Thinkpad T30. It is driving meup the wall. Problems:1. Lack of keyboard alternatives for routine operations. I can'tget to the master menus without using the mouse equivalent.2. Nothing is mounted for program development. No gcc, no make,etc. No diff.3. While info is mounted, the proper .inf files are not. Forexample, for dd it simply...
Hello guys,I am not sure if this is the right place to post, but I am about readyto give up on gpsim and find a windoze machine and use...
Hello guys,I am not sure if this is the right place to post, but I am about readyto give up on gpsim and find a windoze machine and use MPLAB again.(I really don't want to and am trying to use gpsim).I am running a ubuntu machine and I have gpsim installed. I compiledmy asm file using gpasm and then loaded gpsim with gpsim -s myfile.codThe program comes up fine, however I am not...
Hi I have always feels that , the open source software more unstable.Especially when I use Linux, there are always many problems, and mostof...
Hi I have always feels that , the open source software more unstable.Especially when I use Linux, there are always many problems, and mostof them are hard to solve.Such as eclipse for linux, I have tried it on some linux, like ubuntu,suse, I felt that , it's more unstable than windows edition.Do you have the same feeling?why is this could happen?
hi,we are trying to run the "Virtex4_PPC_Example_9_1" example program(that came along with the EDK9.1.2 kit) that has TestInterrupt.croutine...
hi,we are trying to run the "Virtex4_PPC_Example_9_1" example program(that came along with the EDK9.1.2 kit) that has TestInterrupt.croutine (timer interrupt driving the LEDs and UART interfacedisplaying the status.)"We are able to see LEDs flashing on the board but not able to speedup or slow down the clock using the 'f' , 's' inputs through thehyperterminal, which we are expecte...
Hi guys !I am a rookie in gcc.So please help me out.I have arm-elf-gcc 4.1.1 installed on Ubuntu and I have to crosscompile for...
Hi guys !I am a rookie in gcc.So please help me out.I have arm-elf-gcc 4.1.1 installed on Ubuntu and I have to crosscompile for ARM7TDMI-S core based LPC2368 processor.I have the C runtime file crt0.S, the startup.S,processor's headerfile and I have also modified the ROM.ld.So, what I remember , the process will be :1. Convert C source code to object file.2. Link all the ob...
hi,I am doing some more work to get to know the STM32F103, now looking in the libopencm3 library and learning from the example...
hi,I am doing some more work to get to know the STM32F103, now looking in the libopencm3 library and learning from the example code.(using ubuntu as development platform)I am looking at the demo application to create a usb-over-serial interface (usb_cdcacm), as found here:https://github.com/libopencm3/libopencm3-examples/tree/master/examples/stm32/f1/stm32-maple/usb_cdcacm
Hello Developers,We have a new release (2.2 ) of MicroXwin- Our high performancekernel based X windows implementation.This release includes...
Hello Developers,We have a new release (2.2 ) of MicroXwin- Our high performancekernel based X windows implementation.This release includes severalbug fixes and performance improvements and demo for Ubuntu 10.10 x86distribution.Please visit http://www.microxwin.com for more information. You canevaluate performance on several distributions.RegardsVasant
Hello to allI have Ubuntu 10.04 linux installed on my Desktop PC and I have an ARMdevelopment board for the development of applications for...
Hello to allI have Ubuntu 10.04 linux installed on my Desktop PC and I have an ARMdevelopment board for the development of applications for the ARMprocessors and testing the application on the ARM board.I searched all the net and what I have got is either the commercial SDK forthe ARM or the open source free developement tools for the ARM that alsofor the windows and not for the linu...
