Does someone has experience with rabbit uC ?I am looking for an uC with many communication ports (serials/CAN and ethernet). The rabbit...
Does someone has experience with rabbit uC ?I am looking for an uC with many communication ports (serials/CAN and ethernet). The rabbit looks like a good choice.How does it compares to the ARM7TDMI?Thx, Adib.---
Hi,I was thinking of buying a Rabbit Semiconductor evaluationkit for either the Rabbit 2000 or 3000 range. Has anyonehere had any...
Hi,I was thinking of buying a Rabbit Semiconductor evaluationkit for either the Rabbit 2000 or 3000 range. Has anyonehere had any experience using these micros, and any commentsgood, bad or indifferent. The large amount of serial portslooks quite good and the instruction set doesn't look toofar removed from the Z80. This is not an attempt to canvasthe usual 'micro x is better than ...
Hi experts,We have to design a special device....to implement a special protocolon top of ethernet. Rabbit 4k devices look like a good...
Hi experts,We have to design a special device....to implement a special protocolon top of ethernet. Rabbit 4k devices look like a good choice, but itcomes with TCP/IP stack built in.How easy it is in Rabbit 4K to get rid of the the TCP/IP stack from OSand take charge of packets arriving over ethernet.I am aware of NE2000 compatibility. Please let me know whether it willbe helpf...
Hi everyone!I have the following question: I need to interface an rx module RFfrom Aurel (RX-4M30RR01SF) with a Microcontroller from...
Hi everyone!I have the following question: I need to interface an rx module RFfrom Aurel (RX-4M30RR01SF) with a Microcontroller from RabbitSemiconductor, the RCM3700. More specifically, the AUrel moduelreceives a signal from a 4-channel remote, still from aurel (TX3750-ACSAW433), and according to this signal the Rabbit willactivate/deactivate the related controls.My REAL problem is u...
Do you know if it is possible in Rabbit 3400 CPU module to access all its serial com ports simultaneously?Does its C development environment...
Do you know if it is possible in Rabbit 3400 CPU module to access all its serial com ports simultaneously?Does its C development environment support multiple threads?
Hello, everyone , is there a port of linux for Rabbit 3000microprocessor ?Thanks in advance.
Hello, everyone , is there a port of linux for Rabbit 3000microprocessor ?Thanks in advance.
Hi All,I want to move to something bigger than a Z80/8032/PIC which I use atthe moment. I would like about 50 MIPS, 1MByte Flash, 256KByte...
Hi All,I want to move to something bigger than a Z80/8032/PIC which I use atthe moment. I would like about 50 MIPS, 1MByte Flash, 256KByte RAM -possibly all external, integrated ethernet, 2 serial ports, enoughtDSP capability to do 2 or so channels VOIP, the ability to self program(bootloader) for remote update.I have looked at ST, Freescale and Rabbit. The rabbit seems to bealm...
hi, I want to load a web page on rabbit core 3000 and connect thatmodule on internet.How can i access that page from the net. i amexpecting...
hi, I want to load a web page on rabbit core 3000 and connect thatmodule on internet.How can i access that page from the net. i amexpecting your valuable idea regarding this. Advance thanks for yourresponsewith regardsmarans
Hi All,Cool new PC controller kit based on the Rabbit 3000. Both thefirmware and Windows server software is open source.Here you go:...
Hi All,Cool new PC controller kit based on the Rabbit 3000. Both thefirmware and Windows server software is open source.Here you go: www.zanware.com--Zan
hihas anyone used the fser.lib with a rabbit 3000 uC? if yes couldsomebody post some code samples how to use it with spi?thankschris
hihas anyone used the fser.lib with a rabbit 3000 uC? if yes couldsomebody post some code samples how to use it with spi?thankschris
I would like a turnkey board with development in C, 4+ A/D inputs with atleast 8 digital inputs and 8 outputs.So far I have found the Rabbit...
I would like a turnkey board with development in C, 4+ A/D inputs with atleast 8 digital inputs and 8 outputs.So far I have found the Rabbit 3400 for be the closest fit. Are there anyothers out there? I find the Rabbit a little hokey with is extended memoryarchitecture. It reminds me of EMM on a XT style PC. I have experience witha embedded PCs on 386/486 as well as some Windows progra...
A few weeks ago I posted a request asking for cheap (vs Olimex's MSP430boards) EVBs with Ethernet to build a proof of concept and then use...
A few weeks ago I posted a request asking for cheap (vs Olimex's MSP430boards) EVBs with Ethernet to build a proof of concept and then use thedesign as the basis of a low-volume production run. I can't seem tofind that thread, but here's a summary of what I decided:Someone in that thread suggested Rabbit. It is a long time since Ilooked at Rabbit, but I took a look, talked to their sal...
I know this is probably an easy question for some of you, but here'swhat I am trying to do:Use a single board computer (ie Zworld's Rabbit...
I know this is probably an easy question for some of you, but here'swhat I am trying to do:Use a single board computer (ie Zworld's Rabbit Processor) to read aUSB device such as Memory Stick or Digital Camera. The Rabbit boardhas serial ports, but not USB port. Have any of you done anything likethis??Thanks in Advance,JS
Aaaaugh !!! Teenie-tiny pin schemes may be ok for robots, butnot for human assemblers. Rabbits 2mm scheme was bad enough, but now I'm...
Aaaaugh !!! Teenie-tiny pin schemes may be ok for robots, butnot for human assemblers. Rabbits 2mm scheme was bad enough, but now I'm workingwith the RCM-3400 which shrank everything down to asolder-bridge-guarenteed 1.27mm layout. Rabbit does sell what it calls an adaptor board ... butyou get a board and some SM sockets YOU have to solderonto the thing. This doesn't fix the ...
Hello All, I am new to the forums, previously have been lurking throughout theforums. I have a rabbit core 3319 micro controller that has...
Hello All, I am new to the forums, previously have been lurking throughout theforums. I have a rabbit core 3319 micro controller that has source codethat I no longer have access to. I was wondering if there was a way Icould clone this device using rabbit core cloning tool. After some reading I found that the enabling of cloning is dependentparameters set on the master 3319 chip. My mai...
Admittedly, I'm a fan of ZigBee because it solves a lot of problems. Rabbit has justintroduced a solid ZigBee...
Admittedly, I'm a fan of ZigBee because it solves a lot of problems. Rabbit has justintroduced a solid ZigBee kit:http://microcontroller.com/news/zigbee_rabbit.aspThis is a great starter kit, and by this time next year ZigBee will be a needed skill tolist on your resume.Regards,Bill GiovinoExecutive Editorhttp://Microcontroller.com
Hello, I am currently running BL2600 with Web Server (RabbitWeb). I amlittle confused with RabbitWeb setup. I DEBUGED and RAN the...
Hello, I am currently running BL2600 with Web Server (RabbitWeb). I amlittle confused with RabbitWeb setup. I DEBUGED and RAN the SAMPLERabbitWeb program web.c and it ran with no problem. I was able tosuccessfully access the webpage by simply typing in the Rabbit IP addresson my web browser (firefox), but when I run my program and do the same, Idon't get the rabbit webpage that I created but ...
I have the book, uCOS-II: The real-time kernel, bought before Istarted using dynamic C (Z-World, rabbit semiconductor, RCM-3000module). The...
I have the book, uCOS-II: The real-time kernel, bought before Istarted using dynamic C (Z-World, rabbit semiconductor, RCM-3000module). The version of Dynamic C I'm using (8.30) did not come withthe uCOS-II .LIB files.Is there some way I can use or create the .LIB files (ucos2.lib,os_cfg.lib, others?) from the source code from uCOS CD, or must I buythese .LIB files from Z-world? Do I...
Has anyone else tried buying these online through the Rabbitsemi website> zworld for the order to be cancelled without any warning?
Has anyone else tried buying these online through the Rabbitsemi website> zworld for the order to be cancelled without any warning?
Hi, I am trying to implement a SMTP server on a Rabbit3000 module whichis used to store emails for 2 different users. Somebody plz tell me...
Hi, I am trying to implement a SMTP server on a Rabbit3000 module whichis used to store emails for 2 different users. Somebody plz tell me howto go about it?
