HiI should implement fire wire for a MPC860 or 8250(motorola) board.Has someone experience with 1394 (firewire) connected with...
HiI should implement fire wire for a MPC860 or 8250(motorola) board.Has someone experience with 1394 (firewire) connected with motorolacontroller?Thanks
Hi,I was wondering if anyone has ever use FPGA to communicate withanother board that use PC/104 plus bus as the interface? To give abetter...
Hi,I was wondering if anyone has ever use FPGA to communicate withanother board that use PC/104 plus bus as the interface? To give abetter view, I have one firewire board that uses a PCI-to-1394 hostchip and another board that has an FPGA on it. I would like to controlthe firewire by using the FPGA. Does anyone has any suggestion on howto do this?I've tried using Xilinx PCi IPCor...
Another question on firewire : Who knows what are the available firewireinterface chips (slave side) ? Is there any microcontroller with...
Another question on firewire : Who knows what are the available firewireinterface chips (slave side) ? Is there any microcontroller with firewireinterface built in, as we have for the usb (like Cypress's FX) ?Many thanks,Robert Lacoste - ALCIOMhttp://www.alciom.com
Hi,I was wondering if there's any microcontroller with built-in 1394 support i.e. with the appropriate hardware connectivity and a firewire...
Hi,I was wondering if there's any microcontroller with built-in 1394 support i.e. with the appropriate hardware connectivity and a firewire stack in firmware?Google just gave me that MindReady solution which appears to be quite expensive.Thanks in advanceRoland
Hi,I have been looking at various options for communicating between a PCand an MCU. The typical peripherals on a PC today is of course...
Hi,I have been looking at various options for communicating between a PCand an MCU. The typical peripherals on a PC today is of course USB,Ethernet and one that seems to be mostly forgotten in the embeddedword - IEEE-1394. The actual specifications for IEEE-1394 is tooexpensive for me, so I have been reading what I could find regardingthis interface. From a software point of view it ...
hi, i am writting ohci 1394 driver.I have read the source code in linux kernel, it's very complicated.I initialize the TI ohci controller like...
hi, i am writting ohci 1394 driver.I have read the source code in linux kernel, it's very complicated.I initialize the TI ohci controller like linux(But not initialize the DMAcontext), install the interrupt handler.I think there will be a interrupt when I reset the 1394 bus, but no.the ohci 1394 driver is very complicated, can any one give me someinformation about it.any tips will be...
Hi, I just have another question about 1394 address?what is the relationship between 1394 adddress and memory address? ...
Hi, I just have another question about 1394 address?what is the relationship between 1394 adddress and memory address? ---------------------------------------Posted through http://www.EmbeddedRelated.com
Hi,I am implementing firewire interface with MPC8347 Microcontroller usingVxWorks RTOS. I am using TI's TSB43AB23 firewire OHCI link/PHY...
Hi,I am implementing firewire interface with MPC8347 Microcontroller usingVxWorks RTOS. I am using TI's TSB43AB23 firewire OHCI link/PHY layercontroller which is connected to MPC8347 using PCI Interface. Both TSB43Ab23 and MPC8347 are configured as PCI master and only these 2devices are present on PCI bus.When I connect a Firewire Simulator/Analyzer to TSB43Ab23 I am able toreceive SelfI...
hi i need more info about :**firewire**firewire chip setplease if every 1 contribute a bit i'll reach my aimplease if u can add pic (...
hi i need more info about :**firewire**firewire chip setplease if every 1 contribute a bit i'll reach my aimplease if u can add pic ( add its url if u cant post it )
There is power available on the 6-pin firewire connectors, but how much ?Does the standard gives a precise guaranteed minimum available power...
There is power available on the 6-pin firewire connectors, but how much ?Does the standard gives a precise guaranteed minimum available power (sharedby the slaves of course) ?Thanks for your help,Robert Lacoste - ALCIOMhttp://www.alciom.com
Hi, I'm searching for a embedded Firwire hardware. I know the TI controller, butwwonder if there is a cool web page to start with the basiscs...
Hi, I'm searching for a embedded Firwire hardware. I know the TI controller, butwwonder if there is a cool web page to start with the basiscs of Firewire,eespecially for a start in an embedded system.Thanks for any hint, Michael-- Remove the sport from my address to obtain emailwww.enertex.de - Innovative Systeml?sungen der Energie- und Elektrotechnik
Just looking for some generic for firewire hardware to and frommultichannel digital audio, preferably off the shelf. 48K 24 bitstuff.Been to...
Just looking for some generic for firewire hardware to and frommultichannel digital audio, preferably off the shelf. 48K 24 bitstuff.Been to TI.com, nothing obvious, I gave up on philips,, google hadalot of irrelevant stuff.I'm just working on a concept, and I'm trying to find out how bad/easyit is!It's just an idea for getting audio in and out of a PC to my POS, so afew pointe...
I'm working on a board that will need to be able to send a lot of data to aPC. I've already got a 100 MBit ethernet controller, but we are...
I'm working on a board that will need to be able to send a lot of data to aPC. I've already got a 100 MBit ethernet controller, but we are alsolooking at high speed (480 MBits) USB and Firewire as options. There is anfpga on the board, so I'm quite flexible about connections. Does anyonehave any ideas as to what sort of controllers are readily available? Also,I'd be very interested a...
I'm looking for a Firewire (IEEE1394) evaluation kit to learn about devicedesign and software interface (not host design). My planned hardware...
I'm looking for a Firewire (IEEE1394) evaluation kit to learn about devicedesign and software interface (not host design). My planned hardware shouldwork without processor and the interface to the attached device should beas simple as possible (e.g. a FIFO or RAM or port interface).Does anybody know about such an eval kit?
is there any one who manufacture pc104 with pentium 4 and firewire , Pci slot.if so can you refer me to his web page? or correct me if i am...
is there any one who manufacture pc104 with pentium 4 and firewire , Pci slot.if so can you refer me to his web page? or correct me if i am wrong.thanks alotanahmany
Hello,I am comparatively new to the embedded world and hope to find heresome advices and inspirations and maybe answers to the many...
Hello,I am comparatively new to the embedded world and hope to find heresome advices and inspirations and maybe answers to the many questionsI have.I am going to develop a distributed application with the followingcharacteristics. A central control programme (probably on a PC) shalltalk with a number of embedded devices (microcontroller with sensorsand actuators etc.) and the tra...
Hi, I have been troubled by the IEEE1394 address space for a long time.How to use the lowwer 48bit address space?I use the ubCore's command...
Hi, I have been troubled by the IEEE1394 address space for a long time.How to use the lowwer 48bit address space?I use the ubCore's command line tool to read from a 1394 adapter, use theaddress like 0xFFFF00000000, but the tool told me the address can not beread.But I can read from 0xFFFFF0000404 which defined in CSR.I am so confused about the address problem.Please give me some ti...
Anyone know any current models, besides these, that still have serial and/parallel ports?Serial/Parallel1. Fujitsu Lifebook E8110 ...
Anyone know any current models, besides these, that still have serial and/parallel ports?Serial/Parallel1. Fujitsu Lifebook E8110 Drawbacks: No 1394, UMA graphicsSerial1. Dell D6202. Dell D8203. Dell D520 Drawbacks: UMA graphics4. HP Compaq nc8430 Drawbacks: No IrDA
Hello.I'm looking to put together a little hard disk recorder -essentially six audio channels connected to some sortof audio interface on...
Hello.I'm looking to put together a little hard disk recorder -essentially six audio channels connected to some sortof audio interface on a motherboard and a storagedevice (a serial ATA disk).Essentially, I'm looking for a motherboard with sixhigh quality audio inputs and on-board USB orFirewire. The speed of the CPU is immaterial, it's farmore important that the device has low...
Hi,We are looking for a good Protocol Analyzer to use mainly for I2C, SPI& UART. Also it would be nice if the analyzer supported (via add-ons...
Hi,We are looking for a good Protocol Analyzer to use mainly for I2C, SPI& UART. Also it would be nice if the analyzer supported (via add-ons orsimilar) other protocols (USB, ATAPI, Firewire).We are not in a rush to buy one, and would prefer to analyze the marketfirst and then invite suppliers to demonstrate their products.Advanced features are nice but primarily we should be able ...
