Hello,I am using XDS510 USB emulator.I am able to reset my emulator but unable to detect it.Getting below error in sdconfig**...
Hello,I am using XDS510 USB emulator.I am able to reset my emulator but unable to detect it.Getting below error in sdconfig** Checking for a valid emulator/eZdsp $$ You are connected to: $$ EmuProductName=XDS510USB $$ EmuPortAddr=0x510 $$ EmuPortMode=USB $$ ProductId=510 $$ ProductVersion=84** Checking emulator/eZdsp scan connection** Emulator Test **...
I can't connect to a PDS51 (with serial cable), the software says that there is no emulator connected to the COM port!!!Is there anybody...
I can't connect to a PDS51 (with serial cable), the software says that there is no emulator connected to the COM port!!!Is there anybody that knows this emulator?I need help...Thanks
Hi,I am using a JTAG based emulator, but as I could see the JTAG emulatorcan not give what we want when we are looking for very complex...
Hi,I am using a JTAG based emulator, but as I could see the JTAG emulatorcan not give what we want when we are looking for very complex bugs,it has a limited trace buffer and we can not set watch pointers,etc...The conclusion is that we have to have a better tool, but it is beingdifficult to find something out there, what amazing me, because thePXA is largelly used.I thought in...
I'm goint to debug ARM7TDMI using TI XDS510PP-Plus JTAG emulator. Iwant to know if it is possible to use XDS510 JTAG emulator underADS(Arm...
I'm goint to debug ARM7TDMI using TI XDS510PP-Plus JTAG emulator. Iwant to know if it is possible to use XDS510 JTAG emulator underADS(Arm Development Suite) environment.Do I need some drivers?Please, Help me.
Hi, I am trying to find a JTAG emulator for a new project which uses aARM7 processor. I am considering several vendors, such as...
Hi, I am trying to find a JTAG emulator for a new project which uses aARM7 processor. I am considering several vendors, such as Lauterbach(Trace32 ICD), Macraigor (Wiggler, Raven, usbDemon, mpDemon), Emutec(DebugJet), Hitex (Tantino), Embest, Nohau, EPI, SigNum, ...etc. Theemulator has to support multi-core. If anyone has use the JTAG emulator from these vendors, can youpleas...
I have a board using a 25MHz 80C186EB and I'm looking for an in circuitemulator that will allow the following:Stepping through codestream...
I have a board using a 25MHz 80C186EB and I'm looking for an in circuitemulator that will allow the following:Stepping through codestream instruction by instruction That is it. I want to yank the CPU off the nonfunctional board, drop asocket, hook up the emulator and step through exactly what the on board CPUwas seeing instruction by instruction....and the cheaper the better....
I would like to rent or buy (1 month period) an in-circuit emulator for theIntel 80C186XL processor. I need it for about 1 month. Doers someone...
I would like to rent or buy (1 month period) an in-circuit emulator for theIntel 80C186XL processor. I need it for about 1 month. Doers someone haveone they could rent me or sell or could you refer me to a company thatcarries them. The manufacturer of the emulator is unimportant.thank you
Hi I am new to ARM. I have a aac decoder which i run in arm. It isworking fine and it is perfectly matching. But the performance...
Hi I am new to ARM. I have a aac decoder which i run in arm. It isworking fine and it is perfectly matching. But the performance numbersbetween simulator and emulator differs widely.In Simulator it is around 20Mcycles. But when i run the same inemulator it takes around 10 to 20 times higher with catch enable.As a test I tried a single load from same location for 100 times andon ave...
Hi, Where can I get a atmel 89c52 emulator ,or development kit, with areasonable price? Thanks,Pipi
Hi, Where can I get a atmel 89c52 emulator ,or development kit, with areasonable price? Thanks,Pipi
Hi,I am looking for a low cost 27xxx eprom emulator. Please advice me onwhich one I should get.ThanksNathan
Hi,I am looking for a low cost 27xxx eprom emulator. Please advice me onwhich one I should get.ThanksNathan
Hi ,I am looking for a Renesas M16c/M32C M3A-0665 FoUSB emulatorI know it has been superseded by the E8A but for particular reasons we...
Hi ,I am looking for a Renesas M16c/M32C M3A-0665 FoUSB emulatorI know it has been superseded by the E8A but for particular reasons we need the M16c/M32C M3A-0665 FoUSB emulator and it's software. renesas do not have any left. I have tried themso if any one, preferably UK based has a M16c/M32C M3A-0665 FoUSB emulator I could buy beg, borrow, steal or swap for an E8a please con...
Hi,for maintainance of a 68000 PLCC or DIP based board I'm looking to get anemulator or something else to load my code quickly into RAM....
Hi,for maintainance of a 68000 PLCC or DIP based board I'm looking to get anemulator or something else to load my code quickly into RAM. Sorry, I can'tuse any ROM monitor solutions since I don't know less about resourceoccupation. Even a used part and any hint where to get it is appreciated. Klaus
Please suggest good emulator for 8051/8052 which support ISPdevices(Atmel AT89S series)ThanksNaimesh
Please suggest good emulator for 8051/8052 which support ISPdevices(Atmel AT89S series)ThanksNaimesh
Hello,Its time for an EPROM emulator. I would prefer USB, > 1MBit, fast down load,Win2k/XP compatible tools,
Hello,Its time for an EPROM emulator. I would prefer USB, > 1MBit, fast down load,Win2k/XP compatible tools,
I have googled for an hour now, but the i386EX family does not seem to have a jtag emulator/debugger available.Is this true ??hamilton
I have googled for an hour now, but the i386EX family does not seem to have a jtag emulator/debugger available.Is this true ??hamilton
I need to find an emulator or some other way to support an old 80c51faproduct. I already have an assembler (an old Avocet ava51.exe) thatworks...
I need to find an emulator or some other way to support an old 80c51faproduct. I already have an assembler (an old Avocet ava51.exe) thatworks ok. I need a way to step through this code and see the sourcecode and symbols. What is the best way to do this? The program iswritten only in assembly language.thanks,Walter
So if I was to think about writing an arm emulator for fun, which corefamily should I choose? I see that there are rt system and...
So if I was to think about writing an arm emulator for fun, which corefamily should I choose? I see that there are rt system and applicationcores (and secure). The benefits of each in terms of application areobvious. Are the rt systems averse to letting you write an operatingsystem on top?thanksSohail
Does anyone have an emulator for a 2716 eprom that they no longer havea use for?In the alternative, does anyone know if anyone is still making...
Does anyone have an emulator for a 2716 eprom that they no longer havea use for?In the alternative, does anyone know if anyone is still making these?Thanks.Tim
I need to run a couple of powerpc routines through an emulator to see what funky conversions are happening.Ive googled around and cant find...
I need to run a couple of powerpc routines through an emulator to see what funky conversions are happening.Ive googled around and cant find a stock C source tree i can compile and use.Preperably without much in the way of os support, just raw emulation.Any ideas?joolz-- --------------------------------- --- -- -Posted with NewsLeecher v6.5 Beta 2Web @ http://www.new...
What I mean by a software emulator is, an application that runs on adesktop/laptop where some favor of MSP430 code can be run and tested,as if...
What I mean by a software emulator is, an application that runs on adesktop/laptop where some favor of MSP430 code can be run and tested,as if it was running on the actual chip.Hope that makes sence.
