Curiously, Atmel seem to have changed both their URI mintingscheme and the PDF formatting sometime between 19'th and 29'th.(As well as...
Curiously, Atmel seem to have changed both their URI mintingscheme and the PDF formatting sometime between 19'th and 29'th.(As well as their logo.)Thus, the document formely known as, say:http://www.atmel.com/Images/doc8159.pdfis now instead:http://www.atmel.com/Images/Atmel-8159-8-bit-AVR-microcontroller-ATmega8A_datasheet.pdf(which seems almost hopeless for me to re...
We are regularly programming an Atmeg128l board with the Atmel JTAGICE+ AVRStudio with no problems, but in production it would be useful touse...
We are regularly programming an Atmeg128l board with the Atmel JTAGICE+ AVRStudio with no problems, but in production it would be useful touse a MacGraigor Wiggler to program the Atmel, as we already have onein our test/programming jig.MacGraigor don't support the Atmel AVR devices, but I reckon thereshould be a software solution to this, does anyone know what it mightlook like?TIA....
Read All About it, Read all About it.Atmel releases single clock cycle 8051...
Read All About it, Read all About it.Atmel releases single clock cycle 8051 chips...http://www.atmel.com/dyn/corporate/view_detail.asp?FileName=AT89LP_3_8.html-- Best Regards,Ulf Samuelssonulf@a-t-m-e-l.comThis message is intended to be my own personal view and itmay or may not be shared by my employer Atmel Nordic AB
Hi,I'm a student working on an embedded systems undergraduate designproject. In our project, we want to use an Atmel chip with some...
Hi,I'm a student working on an embedded systems undergraduate designproject. In our project, we want to use an Atmel chip with some otherZigbee module that will allow us to transfer information using Zigbeewireless communication. We have found several choices, such asMaxstream's XBee Zigbee module, but we would prefer to use one that isfrom Atmel or is compatible with Atmel.We...
I have an old RFID reader that is based on U2270B chip from Atmel (previously from TEMIC).It seems any kind of info about this IC are...
I have an old RFID reader that is based on U2270B chip from Atmel (previously from TEMIC).It seems any kind of info about this IC are disappeared on Atmel web site. There are only documents and info about RFID transponders, but not the readers.Is Atmel producing this IC yet? Is there a new modern device to use for RFID readers?
Hello,I've done some PIC development before, with the PIC16F690, PIC18F4321,etc. and I'm thinking about trying out the Atmel processors...
Hello,I've done some PIC development before, with the PIC16F690, PIC18F4321,etc. and I'm thinking about trying out the Atmel processors since I'veheard they have a flat memory space (no banks), a software stack, andother things I am interested in. What would be a good entry level atmelmicroprocessor to experiment with (maybe having features like USART,SPI, USB, external data/program ...
I have a PCB with the AT89C51SND1C Atmel MP3 processor.I have loaded the Atmel FLIP software (V2.2.4).I found that the device does not...
I have a PCB with the AT89C51SND1C Atmel MP3 processor.I have loaded the Atmel FLIP software (V2.2.4).I found that the device does not repond to the RS232 communications from the FLIP software. An email to the Atmel support was quickly answered and I was told to use USB instead.I have installed the USB drivers for FLIP, but now when I try to open the USB port I get the error messag...
Hello,Does anybody have info about the average write cycles of Atmel dataflash sectors before wear-out occurs?Maybe I overlooked it, but...
Hello,Does anybody have info about the average write cycles of Atmel dataflash sectors before wear-out occurs?Maybe I overlooked it, but I could not find anything in the datasheets.A mail to Atmel did not lead to any response.Thanks for any reply.Thomas
In my new arm7 design I was biased toward the atmel AT91 seriesbecause I likethe AVR chips so much, but after some research and pointers by nice...
In my new arm7 design I was biased toward the atmel AT91 seriesbecause I likethe AVR chips so much, but after some research and pointers by nice foks such asrickman and Leon, I decided to look toward other manufacturer's offerings. Onething I discovered is that the flash in the atmel chips (which have it) is slow!Thus using a ball grid type package such as the AT91FR40162 with 2Meg of fla...
Hi,Could anyone tell me how to find development tools (softwares andhardwares) for the Atmel GPS chip ATR0625? I ask this as I find...
Hi,Could anyone tell me how to find development tools (softwares andhardwares) for the Atmel GPS chip ATR0625? I ask this as I find noinformation in Atmel offical website.Thanks!
I am a student who wants to learn ARM based embedded system.I have found that Atmel EB40, EB40A, EB55 seem to be goodevaluation boards. I want...
I am a student who wants to learn ARM based embedded system.I have found that Atmel EB40, EB40A, EB55 seem to be goodevaluation boards. I want to buy one, but from where?Atmel's website caters only to the business world.Where can I buy just one board?Thanks very much.-Hikari
Atmel has launched the DIOPSiS DSP Design Contest 2005http://www.atmelroma.it/contest/index.phpFirst price is 6000Euro.Atmel will...
Atmel has launched the DIOPSiS DSP Design Contest 2005http://www.atmelroma.it/contest/index.phpFirst price is 6000Euro.Atmel will be happy to have Universities andd Colleges participating in thecontest.By combining a floating-point VLIW digital signal processor core with anARM7 microcontroller on the same chip, Atmel Corp. adds a new wrinkle in analready intensely com...
They have doubled their prices and the lead times are 18 weeks.Yet, others are making them OK.Are Atmel trying to get out of the...
They have doubled their prices and the lead times are 18 weeks.Yet, others are making them OK.Are Atmel trying to get out of the business?x----------x
A posting to the Atmel FAQ dated 12/05/05 says that "The errata (ifany) will be included IN all newly revised datasheets." I know thereare...
A posting to the Atmel FAQ dated 12/05/05 says that "The errata (ifany) will be included IN all newly revised datasheets." I know thereare some significant errata on the AT91SAM7S family as I have beendiscussing it with the vendor. But they no longer make an errata sheetavailable and the data sheet updated in Feburary this year has noerrata information in it.So what's up Atmel? Tr...
Hi,In the past I did some work with the Atmel FPSLIC. Eventually theproject was changed and the FPSLIC was dropped.I have lots of...
Hi,In the past I did some work with the Atmel FPSLIC. Eventually theproject was changed and the FPSLIC was dropped.I have lots of working code still around from that project. It takesadvantage of the tight FPGA + MCU symbiosis, so it's difficult toreuse on other platforms.I wonder if there are any Atmel FPSLIC users out there? I couldpolish up some of the code and publish it...
In our application, when we update our application stored in flash ofAT89C51ED2 by the IAP function, sometimes we find that one bit...
In our application, when we update our application stored in flash ofAT89C51ED2 by the IAP function, sometimes we find that one bit every128bytes can't be write right.for example, one bit every 128bytes was'0' for ever and can't be changed to '1'.why?About two years ago, ATMEL's Microcontroller T89C51RD2 was used in ourproduct. After ATMEL didn't produce it and advise us replace it by...
comp.arch.embeddedAtmel atiny11 internal clock rangeHas anyone seen a min/max spec. for Atmel's atiny11? The documentation here is dated...
comp.arch.embeddedAtmel atiny11 internal clock rangeHas anyone seen a min/max spec. for Atmel's atiny11? The documentation here is dated 07/06,presumably june, 2006 and states only 1 megcps; no range, no thermal coeficient.Hul
Hi Gurus,I am switching from AVR to ARM. Currently, I use an ATmega162 which isrunning out of code space (16kB) and performance. But I find...
Hi Gurus,I am switching from AVR to ARM. Currently, I use an ATmega162 which isrunning out of code space (16kB) and performance. But I find it difficult tochoose between Atmel's ARM (looking at the SAM7S series) and thePhilipsLPC2104/5/6 series. I don't need many peripherals (yet). My current designuses an FTDI chip for USB, I could save that by using Atmel (Philips has noUSB), but o...
Hi,On our project, we are considering an ARM with a USB interface (AtmelAT91SAM7S256). From looking at the datasheet, it appears that we...
Hi,On our project, we are considering an ARM with a USB interface (AtmelAT91SAM7S256). From looking at the datasheet, it appears that we needan 18.432 MHz crystal for the USB to operate at full speed. Is thiscorrect? The datasheet seems to be a bit ambiguous in this regard. Ilooked at the schematic for Atmel's AT91SAM7S-EK evaluation board andnoticed that they are using an 18.432 ...
Does anyone know of any third party development tools for the AtmelAVR32 family besides IAR? We just got in some EVK1100 developmentboards...
Does anyone know of any third party development tools for the AtmelAVR32 family besides IAR? We just got in some EVK1100 developmentboards bundled with Atmel's AVR32 Studio and a crippled version of IAREmbedded Workbench. The Atmel suite seems pretty hideous and non-intuitive, and the IAR single seat license is 4000 bucks! Is thereanything else out there?Thanks,Bob
