Movatterモバイル変換


[0]ホーム

URL:


ARRI Group
Contact
0L0A5757Slim

Radio Modules

Choose your frequency

13
Swappable radio modules

With an often congested 2.4 GHz ISM band and different frequency regulations in different countries, the ability to exchange radio modules is a huge advantage, allowing focus pullers to choose the module that best suits each shooting location. ARRI's three radio modules for the Hi‑5 cover a multitude of shooting situations with a significantly improved, robust, and long-range radio link.

Hi-5 with RF-EMIP_2
RF-EMIP Radio Module - worldwide

Meet the modules

RF-EMIP Radio Module 2400 MHz DSSS

  • White radio module
  • Certified globally
  • 14 channels
  • Backwards compatible with all white-coded radio devices (e.g. WCU‑4, SXU-1, ALEXA Plus, ALEXA Mini, ALEXA Mini LF, ALEXA LF, ALEXA 65, UMC-4, EMC/AMC/SMC-1, cforce mini RF)
  • Network mode: can pair with up to three hand units for split focus, iris, and zoom operations to one camera/motor controller
  • Rugged, field-proven, outdoor di-pole antenna
RF EMIP - frontlow

RF-2400 Radio Module 2400 MHz FHSS

  • Certified globally
  • Transmitting power: 100 mW
  • 100 channels 
  • Long-range, point-to-point connection for challenging RF environments
  • Rugged, field-proven, outdoor di-pole antenna
RF 2400 - hero - left - toplow

RF-900 Radio Module 900 MHz FHSS 

  • Long-range solution
  • Certified regions: USA and Canada
  • 100 channels (= defined hopping schemes)
  • Network mode: can pair with up to three hand units for split focus, iris, and zoom operation
  • Requires SUP 2.1 for Hi‑5 and RIA‑1 and SUP 1.1 for ZMU‑4, or later
RF 900- table_low
RF-EMIP
RF-2400
RF-900
RF-2400 Radio Module_2
RF-2400 Radio Module - worldwide

Compatibility

Radio Module Website - Comp. Grafik01
Radio Module Website - Comp. Grafik02

Sample setups

Hi‑5 + RF-EMIP connected to ALEXA Mini/Mini LF and cforce motors

Hi-5_ALEXA Mini_cf

Hi‑5 + RF-EMIP connected to ALEXA Mini/Mini LF and cforce motors

Diagram of the handheld camera control unit ARRI hi-5 and rf-emip connected to alexa mini/mini lf cforce motors.

Hi‑5 + RF-EMIP connected to ALEXA LF or ALEXA 65 and cforce motors

Diagram of the handheld camera control unit ARRI Hi-5 and RF-EMIP connected to ALEXA LF or ALEXA 65 and cforce motors.

Hi‑5 + RF-EMIP connected to ALEXA Mini/Mini LF and cforce motors

Hi-5_RIA-1_ALEXA LF_cf (1)

Hi‑5 connected to RIA‑1 and cforce motors with ALEXA camera control

Hi-5_RIA-1_ALEXA LF_OCU-1_cf_CineRT

Hi‑5 + RF-EMIP connected to ALEXA Mini/Mini LF and cforce motors

Hi-5_ALEXA Mini LF_cf

Hi‑5 connected to RIA‑1 and cforce motors with AMIRA camera control

Hi-5_RIA-1_AMIRA_cf_OCU-1 (1)

Hi‑5 + RF-EMIP connected to cforce mini RF for 3rd party camera and lens control

Diagram of the handheld camera control unit ARRI Hi-5 and RF-EMIP connected to cforce mini RF with 3rd party camera control.

Hi‑5 connected to RIA‑1 and cforce motors with 3rd party camera control

Hi-5_RIA-1_3rd Party Camera_OCU-1_cf_CineRT

Radio modules

Radio Modules FAQ

Open all items
  • RF-EMIP (white radio) is our standard radio and provides sufficient range for most cine productions. The typical range (line-of-sight) is 150m, though the actual range can vary depending on the environment. Obstacles such as people or walls blocking the radio signal, as well as other radio transmitters operating on the same frequency, can reduce the range and performance of the Radio Modules.

    Whenever possible, we recommend using our RF-2400 Radio Module (orange radio) in combination with our RIA‑1. The RF-2400 utilizes frequency-hopping technology and is extremely robust against radio interference. It also offers a slightly better range than the RF-EMIP, but it truly excels in challenging RF environments. The only downside of the RF-2400 Radio Module is its point-to-point connection. While up to three hand units can be connected to the same radio host via RF-EMIP, the RF-2400 supports only a single hand unit. It is also possible to use both RF-EMIP and RF-2400 in parallel on the same camera. Some productions even use two RIA‑1 units with RF-2400 on the same camera—one for focus control and the other for iris control.

    For users in the USA or Canada, we also offer the RF-900 Radio Module. These modules provide the longest range in our radio system and, thanks to their frequency-hopping technology, are also highly resistant to radio interference. Like the RF-EMIP, up to three hand units can be connected to a RIA‑1 using the RF-900. However, the use of the RF-900 is legally restricted to the USA and Canada.
     

  • No, they are not compatible. They use different protocols.

  • RF-Radio Module in RIA-1_2
    RF-900 Radio Module - USA/CANADA

    Video Room

    Technical data

    RF-EMIP Radio Module

    RF-2400 Radio Module

    RF-900 Radio Module

    Supported Frequency:

    2400 – 2483.50 MHz

    2400 – 2483.50 MHz

    902 – 928 MHz

    Band:

    ISM 2400 MHz

    ISM 2400 MHz

    ISM 900 MHz

    Modulation Type:

    DSSS

    FHSS

    FHSS

    Operating Mode:

    Point-to-Multipoint

    Point-to-Point

    Point-to-Multipoint

    Power Consumption:

    248-272 mA

    348-372 mA

    @ 100 mW: 292-332 mA

    Transmit Power:

    Depending on the region betw. 8.9 – 70.8mW

    100 mW

     100 mW

    Weight:

    52 g / 1.83 oz

    52 g / 1.83 oz

    55 g/1.94 oz

    Interfaces:

    10pin IRISO

    10pin IRISO

    10pin IRISO

    Operating Temperature:

    -20°C to +50°C (-4°F to +122°F)

    -20°C to +50°C (-4°F to +122°F)

    -20°C to +50°C (-4°F to +122°F)


    Downloads


    [8]ページ先頭

    ©2009-2025 Movatter.jp