 | |
| Names | |
|---|---|
| IUPAC names Uranium trioxide Uranium(VI) oxide | |
| Other names Uranyl oxide Uranic oxide | |
| Identifiers | |
3D model (JSmol) | |
| ChemSpider | |
| ECHA InfoCard | 100.014.274 |
| EC Number |
|
| UNII | |
| |
| |
| Properties | |
| UO3 | |
| Molar mass | 286.29 g/mol |
| Appearance | yellow-orange powder |
| Density | 5.5–8.7 g/cm3 |
| Melting point | ~200–650 °C (decomposes) |
| insoluble | |
| Structure | |
| see text | |
| I41/amd (γ-UO3) | |
| Thermochemistry | |
Std molar entropy(S⦵298) | 99 J·mol−1·K−1[1] |
Std enthalpy of formation(ΔfH⦵298) | −1230 kJ·mol−1[1] |
| Hazards | |
| GHS labelling: | |
   | |
| Danger | |
| H300,H330,H373,H411 | |
| NFPA 704 (fire diamond) | |
| Flash point | Non-flammable |
| Safety data sheet (SDS) | External MSDS |
| Related compounds | |
| Uranium dioxide Triuranium octoxide | |
Except where otherwise noted, data are given for materials in theirstandard state (at 25 °C [77 °F], 100 kPa). | |
Uranium trioxide (UO3), also calleduranyl oxide,uranium(VI) oxide, anduranic oxide, is the hexavalentoxide ofuranium. The solid may be obtained by heatinguranyl nitrate to 400 °C. Its most commonly encounteredpolymorph is amorphous UO3.
There are three methods to generate uranium trioxide. As noted below, two are used industrially in the reprocessing of nuclear fuel and uranium enrichment.
Uranium trioxide is shipped between processing facilities in the form of a gel, most often frommines to conversion plants.
Cameco Corporation, which operates at the world's largest uranium refinery atBlind River, Ontario, produces high-purity uranium trioxide.
It has been reported that the corrosion of uranium in a silica rich aqueous solution formsuranium dioxide, uranium trioxide,[5] andcoffinite.[6] In pure water,schoepite (UO2)8O2(OH)12·12(H2O) is formed[7] in the first week and then after four monthsstudtite (UO2)O2·4(H2O) was produced. This alteration of uranium oxide also leads to the formation ofmetastudtite,[8][9] a more stable uranyl peroxide, often found in the surface of spent nuclear fuel exposed to water. Reports on the corrosion of uranium metal have been published by theRoyal Society.[10][11]
Like all hexavalent uranium compounds, UO3 is hazardous by inhalation, ingestion, and through skin contact. It is a poisonous, slightly radioactive substance, which may cause shortness of breath, coughing, acute arterial lesions, and changes in the chromosomes ofwhite blood cells andgonads leading tocongenital malformations if inhaled.[12][13] However, once ingested, uranium is mainly toxic for thekidneys and may severely affect their function.
The only well characterized binary trioxide of anyactinide is UO3, of which severalpolymorphs are known. Solid UO3 loses O2 on heating to give green-coloredU3O8: reports of the decomposition temperature in air vary from 200 to 650 °C. Heating at 700 °C under H2 gives dark brownuranium dioxide (UO2), which is used inMOXnuclear fuel rods.
 | The α (alpha) form: a layered solid where the 2D layers are linked by oxygen atoms (shown in red) | Hydrated uranyl peroxide formed by the addition ofhydrogen peroxide to an aqueous solution ofuranyl nitrate when heated to 200–225 °C forms an amorphous uranium trioxide which on heating to 400–450 °C will form alpha-uranium trioxide.[3] It has been stated that the presence of nitrate will lower the temperature at which theexothermic change from theamorphous form to the alpha form occurs.[14] |
 | The β (beta) UO3 form: This solid contains multiple unique uranium sites and distorted polyhedra. | This form can be formed by heating ammonium diuranate, while P.C. Debets and B.O. Loopstra, found four solid phases in the UO3-H2O-NH3 system that they could all be considered as being UO2(OH)2·H2O where some of the water has been replaced with ammonia.[15][16] It was found thatcalcination at 500 °C in air forms the beta form of uranium trioxide.[3] Later experiments found the most reliable method for synthesizing pure β-UO3 was to calcinate uranyl nitrate hexahydrate at 450 °C for 6 days and cool slowly over 24 hours.[17] |
 | The γ (gamma) form: with the different uranium environments in green and yellow | The most frequently encountered polymorph is γ-UO3, whosex-ray structure has been solved from powder diffraction data. The compound crystallizes in the space groupI41/amd with two uranium atoms in the asymmetric unit. Both are surrounded by somewhat distorted octahedra of oxygen atoms. One uranium atom has two closer and four more distant oxygen atoms whereas the other has four close and two more distant oxygen atoms as neighbors. Thus it is not incorrect to describe the structure as [UO2]2+[UO4]2− , that is uranyl uranate.[18] |
 | The environment of the uranium atoms shown as yellow in the gamma form |  | The chains of U2O2 rings in the gamma form in layers, alternate layers running at 90 degrees to each other. These chains are shown as containing the yellow uranium atoms, in an octahedral environment which are distorted towards square planar by an elongation of theaxialoxygen-uranium bonds. |
 | The delta (δ) form is acubic solid where the oxygen atoms are arranged between the uranium atoms.[19] |
 | The proposed crystal structure of the epsilon (ε) form consists of sheets of uranium hexagonal bipyramids connected through edge-sharing polyhedra. These sheets are connected through the axial uranyl oxygen atoms. The proposed structure is in thetriclinicP-1 space group.[20] |
There is a high-pressure solid form with U2O2 and U3O3 rings in it.[21][22]
Severalhydrates of uranium trioxide are known, e.g., UO3·6H2O, which are commonly known as "uranic acid" in older literature due to their similarity in formula to various metaloxyacids, although they are not in fact particularly acidic.[3]
While uranium trioxide is encountered as a polymeric solid under ambient conditions, some work has been done on the molecular form in the gas phase, in matrix isolations studies, and computationally.
At elevated temperatures gaseous UO3 is inequilibrium with solidU3O8 and molecularoxygen.
With increasing temperature the equilibrium is shifted to the right. This system has been studied at temperatures between 900 °C and 2500 °C. The vapor pressure of monomeric UO3 in equilibrium with air and solid U3O8 at ambient pressure, about 10−5 mbar (1 mPa) at 980 °C, rising to 0.1 mbar (10 Pa) at 1400 °C, 0.34 mbar (34 Pa) at 2100 °C, 1.9 mbar (193 Pa) at 2300 °C, and 8.1 mbar (809 Pa) at 2500 °C.[23][24]
Infrared spectroscopy of molecular UO3 isolated in an argon matrix indicates a T-shaped structure (point groupC2v) for the molecule. This is in contrast to the commonly encounteredD3hmolecular symmetry exhibited by most trioxides. From the force constants the authors deduct the U-O bond lengths to be between 1.76 and 1.79Å (176 to 179pm).[25]
Calculations predict that the point group of molecular UO3 isC2v, with an axial bond length of 1.75 Å, an equatorial bond length of 1.83 Å and an angle of 161° between the axial oxygens. The more symmetricalD3h species is a saddle point, 49 kJ/mol above theC2v minimum. The authors invoke a second-orderJahn–Teller effect as explanation.[26]
The crystal structure of a uranium trioxide phase of composition UO2·82 has been determined by X-ray powder diffraction techniques using a Guinier-type focusing camera. The unit cell is cubic with a = 4·138 ± 0·005 kX. A uranium atom is located at (000) and oxygens at (View the MathML source), (View the MathML source), and (View the MathML source) with some anion vacancies. The compound is isostructural with ReO3. The U-O bond distance of 2·073 Å agrees with that predicted by Zachariasen for a bond strength S = 1.[27]
Uranium trioxide reacts at 400 °C withfreon-12 to formchlorine,phosgene,carbon dioxide anduranium tetrafluoride. The freon-12 can be replaced withfreon-11 which formscarbon tetrachloride instead of carbon dioxide. This is a case of a hard perhalogenatedfreon which is normally considered to be inert being converted chemically at a moderate temperature.[28]
Uranium trioxide can be dissolved in a mixture oftributyl phosphate andthenoyltrifluoroacetone insupercritical carbon dioxide, ultrasound was employed during the dissolution.[29]
The reversible insertion ofmagnesium cations into thelattice of uranium trioxide bycyclic voltammetry using agraphite electrode modified with microscopic particles of the uranium oxide has been investigated. This experiment has also been done for U3O8. This is an example ofelectrochemistry of a solid modifiedelectrode, the experiment which used for uranium trioxide is related to acarbon paste electrode experiment. It is also possible to reduce uranium trioxide withsodium metal to form sodium uranium oxides.[30]
It has been the case that it is possible to insertlithium[31][32][33] into the uranium trioxide lattice by electrochemical means, this is similar to the way that somerechargeablelithium ion batteries work. In these rechargeable cells one of the electrodes is a metal oxide which contains a metal such ascobalt which can be reduced, to maintain the electroneutrality for each electron which is added to the electrode material a lithium ion enters the lattice of this oxide electrode.
Uranium oxide isamphoteric and reacts asacid and as abase, depending on the conditions.
Dissolving uranium oxide in a strongbase likesodium hydroxide forms the doubly negatively chargeduranateanion (UO2−
4). Uranates tend to concatenate, formingdiuranate,U
2O2−
7, or other poly-uranates.Important diuranates includeammonium diuranate ((NH4)2U2O7),sodium diuranate (Na2U2O7) andmagnesium diuranate (MgU2O7), which forms part of someyellowcakes. It is worth noting that uranates of the form M2UO4 donot containUO2−
4 ions, but rather flattened UO6 octahedra, containing a uranyl group and bridging oxygens.[34]
Dissolving uranium oxide in a strong acid likesulfuric ornitric acid forms the double positive chargeduranylcation. Theuranyl nitrate formed (UO2(NO3)2·6H2O) is soluble inethers,alcohols,ketones andesters; for example,tributylphosphate. This solubility is used to separate uranium from other elements innuclear reprocessing, which begins with the dissolution ofnuclear fuel rods innitric acid to form this salt. Theuranyl nitrate is then converted to uranium trioxide by heating.
Fromnitric acid one obtainsuranyl nitrate,trans-UO2(NO3)2·2H2O, consisting of eight-coordinated uranium with twobidentate nitrato ligands and two water ligands as well as the familiar O=U=O core.
UO3-based ceramics become green or black when fired in a reducing atmosphere and yellow to orange when fired with oxygen. Orange-colouredFiestaware is a well-known example of a product with a uranium-based glaze. UO3-has also been used in formulations ofenamel,uranium glass, andporcelain.
Prior to 1960, UO3 was used as an agent of crystallization in crystalline coloured glazes. It is possible to determine with aGeiger counter if a glaze or glass was made from UO3.
