Talaria was the brand name of a large-venuevideo projector fromGeneral Electric introduced in 1983.[1]
Light from aXenon arc lamp was modulated by alight valve consisting of a rotating glass disc that was continuously re-coated with a viscous oil. Anelectron beam similar to the one in acathode ray tube traced araster on the surface of the coated glass, deforming the surface of the oil. Where the oil was undisturbed, the light would be reflected into a light trap. The raster traced into the oil formed adiffraction grating.
The basic unit was monochrome (PJ7000 line). Color display is accomplished in one of two ways:
The single lens color projector (PJ5000 line) usedichroic filters to separate the white light of the xenon bulb in two channels, Green and Magenta.
RGB color separation and processing is obtained using verticalwobbulation of the electron beam on the oil film to modulate the green channel and sawtooth modulation is added to the horizontal sweep to separate and modulate Red and Blue channels. The optical system used in the Talaria line is aSchlieren optic like anEidophor, but the color extraction is much more complex.
Two units (MLV) or three units (3LV) are stacked one atop the other, each one devoted to a single color (3LV).[2]
In early models (PJ5000), the light source was a 650 watt xenon bulb (sealed beam) similar to the units in modern 35mm film projectors, and produced 250 lumens at a 75:1 contrast ratio.[3] The later 3LV model produced as much as 3500 lumens at a 250:1 contrast ratio.[4]
The later LV series had an optional "Multiple Personality" (MP) module that would allow the projector to display various resolutions and scan rates produced by computers of the time. It could produce an 8,000 lumen image onto a 15 foot by 20 foot screen from 64 feet away.[5]
From the booth, the GE projector casts its 8,000-lumens images over the heads of the audience, to the 15 x 20 foot screen, 64 feet away.[dead link]