| TF30 | |
|---|---|
 | |
| A TF30 in the Oakland Aviation Museum | |
| Type | Turbofan |
| National origin | United States |
| Manufacturer | Pratt & Whitney |
| First run | 1960s |
| Major applications | General Dynamics F-111 Aardvark Grumman F-14 Tomcat LTV A-7 Corsair II |
ThePratt & Whitney TF30 (company designationJTF10A[1]) is a military low-bypassturbofan engine originally designed byPratt & Whitney for the subsonicF6D Missileer fleet defense fighter, but this project was cancelled. It was later adapted with anafterburner for supersonic designs, and in this form it was the world's first production afterburning turbofan, going on to power theF-111 and theF-14A Tomcat, as well as being used in early versions of theA-7 Corsair II without an afterburner. First flight of the TF30 was in 1964 and production continued until 1986.
In 1958, theDouglas Aircraft Company proposed a short-range, four-engined jet airliner to fill the gap below its new DC-8 intercontinental, known internally as theModel 2067. Intended to be marketed as DC-9, it was not directly related to the later twin-enginedDouglas DC-9.[1] Pratt & Whitney (P&W) had offered itsJT8A turbojet for the airliner, but Douglas preferred to go with a turbofan engine, which would have a greater fuel efficiency than a turbojet. P&W then proposed the JT10A, a half-scale version of its newly developedJT8D turbofan. Development of the new design began in April 1959,[1] using the core of the JT8.[2] Douglas shelved the model 2067 design in 1960, as the targeted US airlines preferred the newly offeredBoeing 727.[3]
In 1960, theUnited States Navy selected the JT10A, designated TF30-P-1, to power the proposedDouglas F6D Missileer, but the project was canceled in April 1961.[4] Meanwhile, the TF30 had been chosen by General Dynamics for its entrant in the TFX competition for theUnited States Air Force and USN, which was selected for production as theF-111.[5] The version of the TF30 for the F-111 included an afterburner.
.jpg)
TheF-111A, EF-111A andF-111E used the TF30-P-3 turbofan.[6] The F-111 had problems with inlet compatibility, and many faulted the placement of the intakes behind the disturbed air of the wing. Newer F-111 variants incorporated improved intake designs and most variants featured more powerful versions of the TF30 engine. The F-111E was updated to use TF30-P-103 engines, the F-111D included the TF30-P-9/109, theFB-111A used the TF-30-P-7/107, and the F-111F had the TF30-P-100.
RAAF F-111Cs were upgraded with the unique P-108 version, using a P-109 engine mated to a P-107 afterburner. The F-111 Engine Business Unit (later taken over by TAE) at RAAF Base Amberley became the world experts on the TF-30 in the years after the USAF retired their fleet and achieved extraordinary increases in reliability of the TF-30.[7]
The TF30 proved itself to be well-suited to the requirements of a high-speed low-altitude strike aircraft with a relatively long operational range, and F-111s in all guises would continue to use TF30s until their retirement.
In 1964, the subsonicLTV A-7A Corsair II won the US Navy's VAL competition for a light attack aircraft to replace theDouglas A-4 Skyhawk.[8] The A-7A used a non-afterburning variant of the TF30, which would also power the improved A-7B and A-7C. In 1965, the USAF selected the A-7D as a replacement for its fast-jet F-100 and F-105 supersonic fighter-bombers in the close air support role. Though the USAF had wanted the TF30, Pratt & Whitney was unable to meet the production timetable, because its facilities were already committed to producing other engines. Instead of producing the TF30 under license for P&W, theAllison Engine Company offered to the Air Force itsTF41 turbofan, a license-built version of theRB.168-25R Spey.[9] The USAF selected the more powerful TF41 for the A-7D, as did the USN, for its similar A-7E.[8]
TheGrumman F-14 Tomcat with the TF30-P-414A was underpowered, because it was the Navy's intent to procure a jet fighter with a thrust-to-weight ratio (in clean configuration) of 1 or better (the US Air Force had the same goals for theF-15 Eagle andF-16 Fighting Falcon). However, due to reliability issues with the intendedPratt & Whitney F401 engines and the intent to incorporate as many of the systems of the failed Navy version of the F-111, theF-111B, into the project, it was deemed that the initial production run of F-14s utilize the F-111B's powerplant. The F-14A's thrust-to-weight ratio was similar to theF-4 Phantom II; however, the new fuselage and wing design provided greater lift and a better climb profile than the F-4. The TF30 was found to be ill-adapted to the demands of air combat and was prone tocompressor stalls at highangle of attack (AOA), if the pilot moved the throttles aggressively. Because of the Tomcat's widely spaced engine nacelles, compressor stalls at high AOA were especially dangerous because they tended to produce asymmetric thrust that could send the Tomcat into an upright or inverted spin, from which recovery was very difficult.
The F-14's problems did not afflict TF30 engines in theUSAF andRAAF F-111s to nearly the same extent. The F-111, while technically designated as a "fighter," was actually used as a ground attack aircraft and tactical bomber. A typical ground strike mission is characterized by less abrupt changes in throttle, angle of attack and altitude than an air-to-air combat mission. While it can still involve hard and violent maneuvers to avoid enemy missiles and aircraft, these maneuvers are generally still not nearly as hard and violent as those required in air-to-air combat, and the F-111 is a larger and less-maneuverable aircraft. Though the F-14A entered service with theNavy powered by the Pratt & Whitney TF30, by the end of the decade, following numerous problems with the original engine, theDepartment of Defense began procuring General ElectricF110-GE-400 engines and installed them in the F-14A Plus (later redesignated to F-14B in 1991), which entered service with the fleet in 1988. These engines solved the reliability problems and provided nearly 30% more thrust, achieving a 1:1 dry thrust to weight ratio with a low fuel load. The subsequent F-14D, a combination of both remanufactured/upgraded F-14As and new manufacture F-14Ds, also used F110-GE-400 engines.
.jpg)
.JPG)
Source:[10]
Source:[10]
Data fromThe Engines of Pratt & Whitney: A Technical History.[10]
Comparable engines
Related lists
