 | This article includes a list ofgeneral references, butit lacks sufficient correspondinginline citations. Please help toimprove this article byintroducing more precise citations.(April 2017) (Learn how and when to remove this message) |
Mechanical advantage is a measure of theforce amplification achieved by using a tool,mechanical device or machine system. The device trades off input forces against movement to obtain a desired amplification in the output force. The model for this is thelaw of thelever. Machine components designed to manage forces and movement in this way are calledmechanisms.[1] An ideal mechanism transmits power without adding to or subtracting from it. This means the ideal machine does not include a power source, is frictionless, and is constructed fromrigid bodies that do not deflect or wear. The performance of a real system relative to this ideal is expressed in terms of efficiency factors that take into account departures from the ideal.
 | This sectionduplicates the scope of other articles, specificallyLaw of the lever. Pleasediscuss this issue and help introduce asummary style to the section by replacing the section with a link and a summary or bysplitting the content into a new article. |
The lever is a movable bar that pivots on afulcrum attached to or positioned on or across a fixed point. The lever operates by applying forces at different distances from the fulcrum, or pivot. The location of the fulcrum determines a lever'sclass. Where a lever rotates continuously, it functions as a rotary second-class lever. The motion of the lever's end-point describes a fixed orbit, where mechanical energy can be exchanged. (see a hand-crank as an example.)
In modern times, this kind of rotary leverage is widely used; see a (rotary) 2nd-class lever; see gears, pulleys or friction drive, used in a mechanical power transmission scheme. It is common for mechanical advantage to be manipulated in a 'collapsed' form, via the use of more than one gear (a gearset). In such a gearset, gears having smaller radii and less inherent mechanical advantage are used. In order to make use of non-collapsed mechanical advantage, it is necessary to use a 'true length' rotary lever. See, also, the incorporation of mechanical advantage into the design of certain types of electric motors; one design is an 'outrunner'.
As the lever pivots on the fulcrum, points farther from this pivot move faster than points closer to the pivot. Thepower into and out of the lever is the same, so must come out the same when calculations are being done. Power is the product of force and velocity, so forces applied to points farther from the pivot must be less than when applied to points closer in.[1]
Ifa andb are distances from the fulcrum to pointsA andB and if forceFA applied toA is the input force andFB exerted atB is the output, the ratio of the velocities of pointsA andB is given bya/b so the ratio of the output force to the input force, or mechanical advantage, is given by
This is thelaw of the lever, whichArchimedes formulated using geometric reasoning.[2] It shows that if the distancea from the fulcrum to where the input force is applied (pointA) is greater than the distanceb from fulcrum to where the output force is applied (pointB), then the lever amplifies the input force. If the distance from the fulcrum to the input force is less than from the fulcrum to the output force, then the lever reduces the input force. To Archimedes, who recognized the profound implications and practicalities of the law of the lever, has been attributed the famous claim, "Give me a place to stand and with a lever I will move the whole world."[3]
The use of velocity in the static analysis of a lever is an application of the principle ofvirtual work.
The requirement for power input to an ideal mechanism to equal power output provides a simple way to compute mechanical advantage from the input-output speed ratio of the system.
The power input to a gear train with a torqueTA applied to the drive pulley which rotates at an angular velocity ofωA isP=TAωA.
Because the power flow is constant, the torqueTB and angular velocityωB of the output gear must satisfy the relation
which yields
This shows that for an ideal mechanism the input-output speed ratio equals the mechanical advantage of the system. This applies to allmechanical systems ranging fromrobots tolinkages.
Gear teeth are designed so that the number of teeth on a gear is proportional to the radius of its pitch circle, and so that the pitch circles of meshing gears roll on each other without slipping. The speed ratio for a pair of meshing gears can be computed from ratio of the radii of the pitch circles and the ratio of the number of teeth on each gear, itsgear ratio.
The velocityv of the point of contact on the pitch circles is the same on both gears, and is given by
where input gearA has radiusrA and meshes with output gearB of radiusrB,therefore,
whereNA is the number of teeth on the input gear andNB is the number of teeth on the output gear.
The mechanical advantage of a pair of meshing gears for which the input gear hasNA teeth and the output gear hasNB teeth is given by
This shows that if the output gearGB has more teeth than the input gearGA, then the gear trainamplifies the input torque. And, if the output gear has fewer teeth than the input gear, then the gear trainreduces the input torque.
If the output gear of a gear train rotates more slowly than the input gear, then the gear train is called aspeed reducer (Force multiplier). In this case, because the output gear must have more teeth than the input gear, the speed reducer will amplify the input torque.
Mechanisms consisting of two sprockets connected by a chain, or two pulleys connected by a belt are designed to provide a specific mechanical advantage in power transmission systems.
The velocityv of the chain or belt is the same when in contact with the two sprockets or pulleys:
where the input sprocket or pulleyA meshes with the chain or belt along the pitch radiusrA and the output sprocket or pulleyB meshes with this chain or belt along the pitch radiusrB,
therefore
whereNA is the number of teeth on the input sprocket andNB is the number of teeth on the output sprocket. For atoothed belt drive, the number of teeth on the sprocket can be used. For friction belt drives the pitch radius of the input and output pulleys must be used.
The mechanical advantage of a pair of a chain drive or toothed belt drive with an input sprocket withNA teeth and the output sprocket hasNB teeth is given by
The mechanical advantage for friction belt drives is given by
Chains and belts dissipate power through friction, stretch and wear, which means the power output is actually less than the power input, which means the mechanical advantage of the real system will be less than that calculated for an ideal mechanism. A chain or belt drive can lose as much as 5% of the power through the system in friction heat, deformation and wear, in which case the efficiency of the drive is 95%.
Consider the 18-speed bicycle with 7 in (radius) cranks and 26 in (diameter) wheels. If the sprockets at the crank and at the rear drive wheel are the same size, then the ratio of the output force on the tire to the input force on the pedal can be calculated from the law of the lever to be
Now, assume that the front sprockets have a choice of 28 and 52 teeth, and that the rear sprockets have a choice of 16 and 32 teeth. Using different combinations, we can compute the following speed ratios between the front and rear sprockets
| input | output | speed ratio | crank-wheel ratio | total MA | |
|---|---|---|---|---|---|
| low speed | 28 | 32 | 1.14 | 0.54 | 0.62 |
| mid 1 | 52 | 32 | 0.62 | 0.54 | 0.33 |
| mid 2 | 28 | 16 | 0.57 | 0.54 | 0.31 |
| high speed | 52 | 16 | 0.30 | 0.54 | 0.16 |
The ratio of the force driving the bicycle to the force on the pedal, which is the total mechanical advantage of the bicycle, is the product of the speed ratio (or teeth ratio of output sprocket/input sprocket) and the crank-wheel lever ratio.
Notice that in every case the force on the pedals is greater than the force driving the bicycle forward (in the illustration above, the corresponding backward-directed reaction force on the ground is indicated).
Ablock and tackle is an assembly of a rope and pulleys that is used to lift loads. A number of pulleys are assembled together to form the blocks, one that is fixed and one that moves with the load. The rope is threaded through the pulleys to provide mechanical advantage that amplifies that force applied to the rope.[4]
In order to determine the mechanical advantage of a block and tackle system consider the simple case of a gun tackle, which has a single mounted, or fixed, pulley and a single movable pulley. The rope is threaded around the fixed block and falls down to the moving block where it is threaded around the pulley and brought back up to be knotted to the fixed block.
LetS be the distance from the axle of the fixed block to the end of the rope, which isA where the input force is applied. LetR be the distance from the axle of the fixed block to the axle of the moving block, which isB where the load is applied.
The total length of the ropeL can be written as
whereK is the constant length of rope that passes over the pulleys and does not change as the block and tackle moves.
The velocitiesVA andVB of the pointsA andB are related by the constant length of the rope, that is
or
The negative sign shows that the velocity of the load is opposite to the velocity of the applied force, which means as we pull down on the rope the load moves up.
LetVA be positive downwards andVB be positive upwards, so this relationship can be written as the speed ratio
where 2 is the number of rope sections supporting the moving block.
LetFA be the input force applied atA the end of the rope, and letFB be the force atB on the moving block. Like the velocitiesFA is directed downwards andFB is directed upwards.
For an ideal block and tackle system there is no friction in the pulleys and no deflection or wear in the rope, which means the power input by the applied forceFAVA must equal the power out acting on the loadFBVB, that is
The ratio of the output force to the input force is the mechanical advantage of an ideal gun tackle system,
This analysis generalizes to an ideal block and tackle with a moving block supported byn rope sections,
This shows that the force exerted by an ideal block and tackle isn times the input force, wheren is the number of sections of rope that support the moving block.
Mechanical advantage that is computed using the assumption that no power is lost through deflection, friction and wear of a machine is the maximum performance that can be achieved. For this reason, it is often called theideal mechanical advantage (IMA). In operation, deflection, friction and wear will reduce the mechanical advantage. The amount of this reduction from the ideal to theactual mechanical advantage (AMA) is defined by a factor calledefficiency, a quantity which is determined by experimentation.
As an example, using ablock and tackle with six rope sections and a600 lb load, the operator of an ideal system would be required to pull the rope six feet and exert100 lbF of force to lift the load one foot. Both the ratiosFout /Fin andVin /Vout show that the IMA is six. For the first ratio,100 lbF of force input results in600 lbF of force out. In an actual system, the force out would be less than 600 pounds due to friction in the pulleys. The second ratio also yields a MA of 6 in the ideal case but a smaller value in the practical scenario; it does not properly account forenergy losses such as rope stretch. Subtracting those losses from the IMA or using the first ratio yields the AMA.
Theideal mechanical advantage (IMA), ortheoretical mechanical advantage, is the mechanical advantage of a device with the assumption that its components do not flex, there is no friction, and there is no wear. It is calculated using the physical dimensions of the device and defines the maximum performance the device can achieve.
The assumptions of an ideal machine are equivalent to the requirement that the machine does not store or dissipate energy; the power into the machine thus equals the power out. Therefore, the powerP is constant through the machine and force times velocity into the machine equals the force times velocity out—that is,
The ideal mechanical advantage is the ratio of the force out of the machine (load) to the force into the machine (effort), or
Applying the constant power relationship yields a formula for this ideal mechanical advantage in terms of the speed ratio:
The speed ratio of a machine can be calculated from its physical dimensions. The assumption of constant power thus allows use of the speed ratio to determine the maximum value for the mechanical advantage.
Theactual mechanical advantage (AMA) is the mechanical advantage determined by physical measurement of the input and output forces. Actual mechanical advantage takes into account energy loss due to deflection, friction, and wear.
The AMA of a machine is calculated as the ratio of the measured force output to the measured force input,
where the input and output forces are determined experimentally.
The ratio of the experimentally determined mechanical advantage to the ideal mechanical advantage is themechanical efficiency η of the machine,