| Military Armament Corporation M10 | |
|---|---|
 MAC-10 (.45 ACP) withsuppressor and without magazine. | |
| Type | Machine pistol Submachine gun |
| Place of origin | United States |
| Service history | |
| In service | 1970–present |
| Used by | SeeUsers |
| Wars | |
| Production history | |
| Designer | Gordon Ingram |
| Designed | 1964 |
| Manufacturer | Military Armament Corporation |
| Unit cost | $120 |
| Produced | 1970–1973[2] |
| Specifications | |
| Mass | 2.84 kg (6.3 lb) empty without a suppressor |
| Length |
|
| Barrel length | 146 mm (5.7 in) |
| Width |
|
| Cartridge |
|
| Action | Straight blowback[3] |
| Rate of fire |
|
| Muzzle velocity |
|
| Effective firing range |
|
| Maximum firing range | 100 meters (for .45 ACP) |
| Feed system |
|
| Sights | Iron sights |
TheMilitary Armament CorporationModel 10, officially abbreviated as "M10" or "M-10",[5] and more commonly known as theMAC-10, is a compact,blowback operatedmachine pistol/submachine gun that was developed byGordon Ingram in 1964. It is chambered in either.45 ACP or9mm. A two-stage suppressor by Sionics was designed for the MAC-10, which not only abates the noise created but makes it easier to control on full automatic (although it also makes the gun far less compact and concealable).[6]
Military Armament Corporation never used the "MAC-10" nomenclature in its catalogues or sales literature, but "MAC-10" is frequently used byTitle II dealers, gun writers, and collectors.[7] For a decade, the semi-automatic pistol version of the weapon was forbidden in the U.S. under the assault weapons ban enacted by Congress in 1994.
The MAC-10 is built predominantly from steel stampings. A notched cocking handle protrudes from the top of thereceiver, and turning the handle 90°, locks the bolt, and acts as an indicator the weapon is unable to fire. The MAC-10 has atelescoping bolt, which wraps around the rear face of the barrel. This allows a more compact weapon and balances the weight of the weapon over the pistol grip, where the magazine is located. The MAC-10 fires from anopen bolt, and the light weight of the bolt results in a rapid rate of fire. In addition, this design incorporates a built-in feed ramp as part of the trigger guard (a new concept at the time) and, to save on cost, the magazine design was recycled from theM3 Grease Gun. The barrel is threaded to accept asuppressor, which works by reducing the discharge's sound without attempting to reduce the speed of thebullet. The .45 ACP models are well-suited for this, as most .45 loads are naturally subsonic, as opposed to the specialized subsonic loads usually required for suppressed 9mm weapons. At the suggestion of theUnited States Army, the suppressor also acts as a foregrip to inhibitmuzzle rise when fired. Ingram added a small bracket with a small strap beneath the muzzle to aid in controlling recoil duringfully automatic fire. The original rate of fire for the MAC-10 in .45 ACP is approximately 1090 rounds per minute.[citation needed] That of the 9mm is approximately 1250, and that of the smallerMAC-11 in.380 ACP is 1500 rounds per minute.[8]
Noting the weapon's poor accuracy, in the 1970s, International Association of Police Chiefs weapons researcher David Steele described the MAC series as "fit only for combat in a phone booth".[9]
The primary reason for the original M10 finding recognition was its revolutionary sound suppressor designed byMitchell WerBell III ofSionics. This suppressor has a two-stage design, with the first stage being larger than the second. This uniquely shaped suppressor gives the MAC-10 a very distinctive look. It is also very quiet, to the point that the bolt can be heard cycling, along with the suppressed report of the weapon's discharge, though only if subsonic rounds are used (standard .45 ACP rounds are subsonic). The suppressor, when used with aNomex cover, creates a place to hold the firearm with the secondary hand, making it easier to control. During the 1970s, the United States placed restrictions on the export of suppressors, and a number of countries canceled their orders as the effectiveness of the MAC-10's suppressor was one of its main selling points. This was one factor that led to the bankruptcy of Military Armament Corporation, another being the company's failure to recognize the private market.[clarification needed] The original Sionics suppressor is 11.44 inches in length, 2.13 inches in overall diameter, and weighs 1.20 pounds.[10]
While the original M10 was available chambered for either .45 ACP or 9mm, the M10 is part of a series of machine pistols, the others being the MAC-11/M-11A1, which is a scaled-down version of the M10 chambered in .380 ACP (9×17mm); and the M-11/9, which is a modified version of the M-11 with a longer receiver chambered in 9×19mm, later made by SWD (Sylvia and Wayne Daniel),Leinad and Vulcan Armament. Law enforcement bureaucracies such as theMinnesota Bureau of Criminal Apprehension (BCA) consider MAC-11 variants such as the Leinad PM-11 to be part of the "MAC-10 class pistol".[11]
In the United States, machine guns areNational Firearms Act items. As the Military Armament Corporation was in bankruptcy, a large number of incomplete sheet metal frame flats were given serial numbers and then bought by a new company, RPB Industries. Some of the previously completed guns, which were already stamped with MAC, were then stamped with RPB on the reverse side, making it a "double stamp" gun.[citation needed]
RPB Industries made many open-bolt semi-automatic and sub-machine guns before theBureau of Alcohol, Tobacco, Firearms and Explosives (BATFE) seized roughly 200 open-bolt semi-autos during the drug wars of 1981. The BATFE insisted that all future semi-automatic firearms were to be manufactured with a closed-bolt design as the open-bolt semi-automatics were considered too easy to illegally convert to full automatic operation.[10]
A semi-automatic variant, the MkIII/IV/V was marketed to South American countries where "military" calibers were forbidden for civilian sales were chambered in .30/.41/.50 Ingram and available as semi-automatic pistols/carbines.[12][13][citation needed]
Wayne Daniel, a former RPB machine operator, purchased much of their remaining inventory and formed SWD, designing a new weapon which was more balanced, available either fully or semi-automatic with his new BATFE-approved closed bolt design.[14]
There are several carbine versions of the M-11/9 and Cobray and SWD manufactured a smaller version chambered in .380 ACP as a semiautomatic pistol called the M-12.[15]
Today, while the civilian manufacture, sale and possession of post-1986 select-fire MAC-10 and variants is prohibited, it is still legal to sell templates, tooling and manuals to complete such conversions. These items are typically marketed as being "post-sample" materials for use by Federal Firearm Licensees for manufacturing/distributing select-fire variants of the MAC-10 to law enforcement, military and overseas customers.[16]
The semi-automatic civilian pistol version of the MAC-10, which operates differently from its military counterpart, fell under the1994 Assault Weapons Ban. The ban – whichexpired in 2004 – enacted various requirements that defined anassault weapon. The MAC-10 was named directly in the ban, and it failed three of the requirements:
Additionally, the magazine capacity is 32 rounds. In response, Wayne Daniel redesigned the M-11 by eliminating the threaded barrel and creating a new magazine release that would only allow the firearm to accept a new 10-round magazine, as the 1994 Assault Weapons Ban mandated. The new firearm was called the PM11/9.[18]
TheBXP is a 9 mm submachine gun developed in the mid-1980s by the South African company Mechem (currently a division of Denel, formerly under ARMSCOR) and brought into production in 1984. Due to international arms embargoes of Apartheid South Africa, the country was forced to design and manufacture their own weapons. The weapon was intended for use by security forces. The manufacturing rights have changed hands several times, passing from Mechem to Milkor Marketing and later to Truvelo Armoury, the current manufacturer (as of 2009[update]).[citation needed]
The Cobra carbine is a semi-automatic firearm of Rhodesian origin manufactured during theRhodesian Bush War Era as a self-defense weapon for farmers and is chambered for the 9×19mm Parabellum round. The layout of this weapon is somewhat based on theUzi submachine gun.[19]
ThePistola Ametralladora Patria is a close copy of the MAC-10 and features a cooling jacket/barrel extension much like the South African BXP. It was developed by Major Luis Ricardo Dávila, of theArgentine Air Force, and protected by national Patent n° 220494/5/6/7 on 20/08/1980. It uses 9mm rounds for easy transportation and can be operated in either hand.[20] A similar earlier Argentine weapon based on the MAC-10 was also designed in 1977 by manufacturer Domingo Matheu, thePistola Ametralladora MPA.[20][21]
The Enarm MSM (Mini Sub Metralhadora or Mini Submachine Gun) was a submachine gun of Brazilian origin based on the Uzi and MAC-10 weapons, made by ENARM.[22] It was chambered in the 9×19mm Parabellum round and also came with a foregrip. Although the weapon performed well in trials, it was discontinued due to the company disbanding due to "internal disruptions".[22]
Section Five Firearms Ltd of Tunbridge Wells, Kent in the UK manufactured a MAC-10 variation in 9×19 Parabellum[23] in the 1970s. They only accept 9×19mm Uzi magazines and are equipped with a classic folding or a special fixed polymer stock.[citation needed]
Bolivia[24][25] 160 9mm MAC-10s manufactured by RPB Industries for use by Bolivian Customs.
Brazil: Used byGRUMEC[26]
Chile[27]
Colombia[28]
Dominican Republic[27]
Greece[24]
Guatemala[24]
Honduras[24]
Iran: Used in small numbers bySAVAK agents[29]
Israel[24]
Jordan: Formerly used by police forces[30]
Lebanon: Formerly used by police forces[31]
Malaysia: Formerly used by theSpecial Actions Unit,Royal Malaysian Police, now on display at the Police Museum[32]
Mexico: Used by police[33]
Morocco: Used by GISGR, DGST and DGED[34]
Poland[24]
Portugal[24]
Saudi Arabia[27]
South Korea: Issued to special forces in the 1970s, later replaced by theDaewoo K1[35]
Spain: Used by variouspolice forces[36]
Thailand: Formerly used by police forces[37]
United Kingdom: Used by theSAS and 14 Intelligence Company on operations in Northern Ireland[27]
United States: Was used by special forces, includingLRRPs andNavy SEALs, in theVietnam War[27][38] and theInvasion of Grenada;[1] MAC-10s are located in the inventories ofDelta Force[39] and the492nd Special Operations Wing[40]
Uruguay: Formerly used by general officer's bodyguards, later replaced by Mini-Uzi[41]
Venezuela[24]
Yugoslavia: One of the first buyers (along withChile)[42]
Lebanese Forces[43]
Ulster Volunteer Force: semi-auto weapons bought in US and illegally converted to full-auto, then smuggled from Canada[44]And they found a backpack on the passenger side that had ammunition and "Leinad PM-11 high capacity pistol." The BCA calls it "a MAC-10 class pistol,"
{{cite web}}: CS1 maint: bot: original URL status unknown (link)Ingram M10 9×19mm submachine gun
{{cite web}}: CS1 maint: numeric names: authors list (link){{cite web}}: CS1 maint: bot: original URL status unknown (link){{cite web}}: CS1 maint: bot: original URL status unknown (link)