Movatterモバイル変換


[0]ホーム

URL:


Jump to content
WikipediaThe Free Encyclopedia
Search

Ford P68

From Wikipedia, the free encyclopedia
Sports prototype racing car model
Racing car model
Ford P68/P69
CategorySports prototype
ConstructorAlan Mann Racing
Designer(s)Len Bailey
Technical specifications
ChassisAluminiummonocoque, withsteelbulkheads
Suspension (front)Double wishbone
Suspension (rear)Single top link with reversed lowerwishbone and twintrailing arms
EngineFord-Cosworth DFV 2993cc 90°V8,naturally aspirated,mid mounted
TransmissionHewland DG300 5-speedmanual
FuelBurmah
TyresGoodyear
Competition history
Notable entrantsAlan Mann Racing
Notable driversNew ZealandBruce McLaren
United KingdomMike Spence
United KingdomChris Irwin
AustriaJochen Rindt
MexicoPedro Rodríguez
AustraliaFrank Gardner
United KingdomRichard Attwood
New ZealandDenny Hulme
Debut1968 BOAC 500
Brands Hatch
RacesWinsPolesF/Laps
8011
Constructors' Championships0
Drivers' Championships0

TheFord P68, also commonly known as theFord 3L GT orF3L, is asports prototyperacing car model introduced in March 1968. It was designed byLen Bailey, aFord research engineer, funded byFord Europe and built byAlan Mann Racing atWeybridge,Surrey,UK. The first competition appearance of a Ford 3L prototype was at theBOAC 500 race atBrands Hatch inKent. It delivered a good pace, but was criticized for instability at high speeds. It did not finish any of the races in which it was entered, due to mechanical and electrical failures.

For the 1969 season the P68 was used as the basis for an aborted, fully openSpyder, dubbed theFord P69. The P69 sported large, free-standingaerofoilwings, which were vital to the car's stability at high-speeds. However, these were banned by the European sanctioning body early in the season, thus the P68 was not eligible to race in the respective class any longer.

Background

[edit]

At the end of the 1967 season theFIA redrew the rules forsports car racing. Engine capacity was limited to 3 litres for the lightest, most advanced Group 6 sports prototype class, while a new 5 litre Group 4 Sports Car class[1] was introduced for vehicles of which at least 50 examples had been built.Ford's American headquarters organisation withdrew from sports car racing at the end of 1967,[2] leaving those teams committed to running the agingGT40 without factory support. While some teams, such asJWA, decided to go down the Group 4 Sports Car route and began work on updating the GT40,Alan Mann Racing decided to build a brand new prototype car aroundFord's recently introduced 3.0LDFVV8Formula One engine.

Raising sponsorship fromFord, as well asBurmah-Castrol andGoodyear, AMR procured the services of leading FordaerodynamicistLen Bailey, who had designed much of the GT40's bodywork, to work on their new car.

Design

[edit]

The car was built toGroup 6 regulations, with an open two-seat bodywork design. This was perhaps rather liberally interpreted, with only a small hatch in the otherwise enveloping roof being left open to the elements.[3] The hatch also allowed the driver to see the centrally mountedrear-view mirror.

One major advantage of the open prototype regulations was that they permitted a much lower roofline than otherwise would have been possible. Bailey used this to create an extremely low, long, curvaceous, aerodynamically efficient design. With aCd of only 0.27[2] and a frontal area of 14 ft²[3] the 3.0L engine was sufficient to push the P68 to over 350 km/h,[2] faster than contemporary Formula One cars. However, former driverFrank Gardner has criticised Bailey's pursuit of aerodynamic efficiency at the expense of driver comfort.[4] In order to keep the P68 on the road, Bailey incorporated a patented,vortex-generating tail scoop, intended to createdownforce without adding todrag. However, although the car has since been shown to produce moderate downforce at speed, this is mostly over the front wheels.[2] The resultant high-speed instability led to bothJohn Surtees andJack Brabham refusing to drive the car.[2][5] Over the following months the P68 sprouted ever larger rearspoilers, and small chin spoilers, in an effort to stabilise the car.

Underneath the curvaceous bodywork, the chassis was ariveted,aluminiummonocoque, withsteelbulkheads onto which the suspension components were mounted.[3] The DFV engine was supported in an aluminium cradle behind the driver. Unlike theLotus 49 for which the DFV had been designed, the engine was not used as a structural chassis member. In contrast, the suspension layout was almost a direct copy of contemporary F1 practice. Contemporary observers commented on the oversized fronthub components, potentially allowing the car to be converted tofour-wheel drive at some point.[3] Theradiator was mounted in the nose, although later enhancements to cooling resulted in a wider opening being incorporated from mid-season. Fuel was stored in two deformable cells, one in each sill.

Following poor results, during the winter of 1968 Len Bailey adapted the P68's monocoque to fully exploit the open-roof regulations. A fully openspyder prototype was produced with almost completely new bodywork panels; even lower and wider, it also included a dramatic reduction in length.[5] Mechanicals were carried over from the P68 in almost unchanged form. This new car was numbered the P69, although differences with the P68 were only skin deep. In an attempt to cure the same stability problems that afflicted the P68, the P69 had an innovative system of interconnected,hydraulically-controlled, partially automatic, adjustableaerofoilwings.[5] However, following several accidents with similar systems during Formula One races, the wings were swiftly banned by the FIA early in the season. Without wings, AMR judged that the car would require a complete redesign to be competitive with the dominantPorsches and therefore, lacking funds, the P68/P69 project was abandoned.

Race history

[edit]
A Ford P68 on display at theGoodwood Festival of Speed.

The first batch of cars was ready for the European season-openingBOAC 500 race, atBrands Hatch on 7 April 1968. Even this early in its career, the P68 had started to grow spoilers and air dams at its front and rear. Two cars were entered, forBruce McLaren andDenny Hulme, andJochen Rindt andMike Spence.[6] However, the two cars were relatively untested, with one actually being brand new, and teething troubles beset the weekend. Although initially slow during practice, gradual tuning and tweaking meant that by the end of qualifying McLaren had managed to put in a lap fast enough to take second place on the grid, splitting the worksPorsche 907s. Unfortunately, the Rindt/Spence car had suffered an engine mount failure and failed to qualify. Spence, something of a Brands Hatch specialist, was substituted into the lead car for the race, and was at the wheel, leading the race, when a rubber joint in the transmission failed, putting the car out. Although neither car had finished, the pace and performance while running looked to be promising better for the future.

This promise was never to be fulfilled. With Mike Spence's death during practice for the1968 Indianapolis 500, fellow BritChris Irwin was drafted in for the P68's next race: the 19681000km Nürburgring. He was lucky to escape death when he lost control of his car at the Flugplatz during practice, although his injuries were severe enough for his career to be ended. The car was destroyed.[7] In the race, once again the remaining P68 failed to finish due to mechanical gremlins. This was to be the pattern during all the remaining races for which the P68 was entered during 1968. One tantalising highlight occurred whenFrank Gardner, who performed much of the P68's limited developmental testing, took pole position at the1000km Spa race. However, once again the car flattered to deceive, as it stuttered to a halt on the first lap of the race with faulty electrics. By this time the P68's faults were all too apparent, and Alan Mann Racing decided not to travel to theZeltweg race.


Problems playing this file? Seemedia help.

For 1969 AMR intended to replace the P68 with its sister car, the P69. However, by the time of the 1969 BOAC 500 race only one P69 was ready. After trying the P69, prior to qualifying,Jack Brabham flatly refused to drive the car in anger so unstable did he find it. That left only a year-old P68 to carry the AMR flag, in the hands of Hulme and Gardner. A large, high-mounted wing was attached directly to the tops of the rear suspension towers, which went some way to reducing rear-end lift at speed, but again an engine failure stopped the car before the end of the race. The final competition outing for the Ford 3L prototype was at the AMOC Martini Trophy meeting atSilverstone. But driver Gardner never even made the grid, as rain during practice soaked the cars electrics, making it unable to start.

Complete World Championship for Makes results

[edit]

(key) (results inbold indicate pole position; results initalics indicate fastest lap)

YearEntrantsChassisClassDrivers12345678910PointsWEMCP
1968Alan Mann RacingP68Group 6DAYSEBBHCMNZTFOSPANÜRWGNZELLMS0-
New ZealandBruce McLaren29
United KingdomMike Spence29
AustriaJochen RindtDNS
New ZealandDenny HulmePO
AustraliaFrank Gardner493536DNA
United KingdomRichard Attwood49DNA
United KingdomChris IrwinDNS
MexicoPedro RodríguezDNS
GermanyHubert Hahne3536
1969Alan Mann RacingP69Group 6DAYSEBBHCMNZTFOSPANÜRLMSWGNORC0-
AustraliaJack BrabhamDNS
AustraliaFrank GardnerDNS
P6832
New ZealandDenny Hulme32
United StatesMasten GregoryPO

Complete entries summary

[edit]
Yr.EventCircuitDriversNotes
1968BOAC 500Brands HatchNew ZealandBruce McLaren
New ZealandDenny Hulme
DNF. Hulme replaced by Spence for race. Transmission failure.
United KingdomMike Spence
AustriaJochen Rindt
DNS. Engine mount failed in practice.
1000km NürburgringNürburgringAustraliaFrank Gardner
United KingdomRichard Attwood
DNF. Brake failure.
United KingdomChris Irwin
MexicoPedro Rodríguez
DNS. Car written off in practice.
RAC TTOulton ParkUnited KingdomRichard AttwoodDNF. Differential failure.
AMOC 500SilverstoneAustraliaFrank GardnerDNF. Engine failure.
1000km SpaSpa-FrancorchampsAustraliaFrank Gardner
GermanyHubert Hahne
Pole position, DNF. Electrical failure.
500km ZeltwegZeltwegAustraliaFrank Gardner
United KingdomRichard Attwood
DNA.
n/dDNA.
1969BOAC 500Brands HatchNew ZealandDenny Hulme
United StatesMasten Gregory
P68, DNF. Gregory replaced by Gardner for race. Oil pressure.
AustraliaFrank Gardner
AustraliaJack Brabham
P69, DNS. Withdrawn.
AMOC 300SilverstoneAustraliaFrank GardnerDNS. Wet electrics.

References

[edit]
  1. ^Wimpffen, Janos L.; McCaw, Bruce R.; Shirley, Jon; Evans, Andrew (January 1, 1999).Time and Two Seats. Motorsport Research Group.ISBN 978-0967225203.
  2. ^abcde"Ford F3L".www.Ultimatecarpage.com. Retrieved2007-02-20.
  3. ^abcdTaylor, Ron (1968)."Prototype Parade No. 276: Ford 3L Proto".Model Cars.5 (7):322–323. Retrieved2007-02-20.
  4. ^Taylor, S. (2008)Lunch with... Frank Garner.Motor Sport, 84/3, p. 84-92
  5. ^abcAnon. (1970)."Ford P69".Model Cars.7 (1):41–43. Archived fromthe original on 2007-10-09. Retrieved2007-02-20.
  6. ^"RAC Sports Car Championship 1968".www.WSPR-Racing.com. Retrieved2007-02-23.
  7. ^Series of photosArchived 2010-01-14 at theWayback Machine at 20832.com

External links

[edit]
Retrieved from "https://en.wikipedia.org/w/index.php?title=Ford_P68&oldid=1251167208"
Categories:
Hidden categories:

[8]ページ先頭

©2009-2025 Movatter.jp