Cylinder blown sheet is a type of hand-blown windowglass. It is created with a similar process tobroad sheet, but with the use of larger cylinders. In this manufacturing process glass is blown into a cylindrical shape by a glass blower. The ends of the cylinder are cut off and a cut is made down the side of the cylinder. The cut cylinder is then placed in an oven where the cylinder unrolls into a flat glass sheet.Blenko Glass Company used this method to make flat glass during the 20th century, but it used a process patented by William Blenko that used molds for the cylinder to enable consistency in the size of the glass. In Blenko's case, slight imperfections were desired for the purpose of giving the flat glass the appearance of antique glass.[1]
The standard (non-Blenko) cylinder method caused surface damages on the glass due to the flattening and moving, and the sheet therefore had to be ground and polished. In 1839 theChance Brothers invented the patent plate process where the glass plate was placed on a wet piece of leather and ground and polished to remove all the surface damage.[2]
Other methods of producing hand-blown window glass includedbroad sheet,blown plate,crown glass andpolished plate. These methods of manufacture lasted at least until the end of the 19th century. The early 20th century marks the move away from hand-blown to machine manufactured glass such asrolled plate,machine drawn cylinder sheet, theFourcault process of flat drawn sheet,single and twin ground polished plate and most common,float glass.
Cylinder blown sheet glass was manufactured in the UK in the mid 19th century. It had been manufactured in France and Germany (and imported to the UK) since the 18th century.