 | This articleneeds additional citations forverification. Please helpimprove this article byadding citations to reliable sources. Unsourced material may be challenged and removed. Find sources: "Conical screw compressor" – news ·newspapers ·books ·scholar ·JSTOR(February 2020) (Learn how and when to remove this message) |
The relatively recently developedconical screw compressor is a type ofrotary-screw compressor using a different topology from the typical dual-screw type. In effect it can be thought of as a conical spiral extension of agerotor, although the exact geometry is somewhat different due to the angular offset. Because of this it does not have the inherent "blow-hole" leakage path which in typical screw compressors is responsible for significant leakage through the assembly and makes low-speed operation impractical. This theoretically allows much smaller rotors to have practical efficiency since at smaller sizes the leakage area does not become as large a portion of the pumping area as in straight screw compressors. In conjunction with the decreasing diameter of the cone shaped rotor this also allows much higher compression ratios to be achieved in a single stage.[1][2]
A significant impediment to production is the machining of the outer rotor to the tolerances required. Although the inner rotor can be manufactured with precise CNC machines using common methods, the outer rotor presents significant difficulties due to the restricted access to the interior for precision tooling, and assembling the outer rotor from easier to machine segments presents its own problems. The cost of units is currently very high, but development is ongoing, development is primarily being performed byVERT Rotors who hold patents on this topology.[3][4]