Movatterモバイル変換


[0]ホーム

URL:


Jump to content
WikipediaThe Free Encyclopedia
Search

7.35×51mm Carcano

From Wikipedia, the free encyclopedia
Italian rifle cartridge
The topic of this articlemay not meet Wikipedia'snotability guidelines for products and services. Please help to demonstrate the notability of the topic by citingreliable secondary sources that areindependent of the topic and provide significant coverage of it beyond a mere trivial mention. If notability cannot be shown, the article is likely to bemerged,redirected, ordeleted.
Find sources: "7.35×51mm Carcano" – news ·newspapers ·books ·scholar ·JSTOR
(February 2023) (Learn how and when to remove this message)
7.35×51mm Carcano
From left,8×57mm,6.5mm Carcano and7.35×51mm Carcano
TypeRifle
Place of originKingdom of Italy
Service history
Used byItaly,Finland,Nazi Germany
WarsWorld War II, others
Production history
Designed1938
Specifications
Parent case6.5 mm Carcano
Case typeRimless bottleneck
Bullet diameter7.57 mm (0.298 in)
Neck diameter8.32 mm (0.328 in)
Shoulder diameter10.85 mm (0.427 in)
Base diameter11.40 mm (0.449 in)
Rim diameter11.40 mm (0.449 in)
Case length51.50 mm (2.028 in)
Overall length73.50 mm (2.894 in)
Case capacity3.26 cm3 (50.3 gr H2O)
Rifling twist240 mm (1:9.45 in)
Maximum pressure350 MPa (51,000 psi)
Ballistic performance
Bullet mass/typeVelocityEnergy
128 gr (8 g) FMJ2,480 ft/s (760 m/s)1,762 ft⋅lbf (2,389 J)

The7.35×51mm Carcano is a rifle cartridge used by the Italian military during World War II.

It was designed during the 1930s to replace the6.5×52mm Carcano used by the Italian military. Unlike the 6.5 mm, the 7.35 mm cartridge featured aSpitzer-style bullet to minimize air resistance in flight.

Description

[edit]

After reports of inadequate performance of the6.5×52mm Carcano at both short and long ranges[1][2] during the campaigns inItalian North Africa (1924–1934) and theSecond Italo-Abyssinian War (1935/36), the Italian army introduced a new short rifle in 1938, the Modello 1938, together with a new cartridge in 7.35×51mm caliber. In addition to the slightly larger caliber, Italian ordnance designers introduced aspitzer-type bullet for the new cartridge, with the tip filled with aluminum to produce an unstable (tumbling) projectile upon impact with soft tissue (a design most likely copied from the.303 British Mk VII bullet). Although the intention was to create a more powerful and precise rifle cartridge, the decision to adopt a lighterbullet than in the 6.5 mm Carcano,[3] and various design problems of the 91/38 rifle, did not permit the cartridge to achieve the intended success.

See also

[edit]

Notes

[edit]
  1. ^Dunlap, Roy F.,Ordnance Went Up Front, Samworth Press (1948), pp. 47–48: The 6.5mm Carcano had reportedly proved inadequate in stopping charges of native tribesmen for a number of years, prompting various stop-gap solutions such as brass-jacketed multiple projectile or frangible explosive bullets, apparently for use against tribesmen in colonial conflicts.
  2. ^Weeks, John,World War II Small Arms, New York: Galahad Books, p. 47: the 6.5mm's blunt bullet and relatively low velocity also gave poor long range performance in machine guns, compared to the cartridges used by most other nations.
  3. ^http://bobshellsblog.blogspot.com/2008/09/735-carcano-rifle.html Bob Shell's Blog
Italian firearms and light weapons of World War II
Side arms
Rifles andcarbines
(fucili emoschetti)
Submachine guns
Machine guns
and other larger weapons
Grenades
Mortars (mortai)
Cartridge


Stub icon

Thisammunition-related article is astub. You can help Wikipedia byexpanding it.

Stub icon

This article about themilitary of Italy is astub. You can help Wikipedia byexpanding it.

Retrieved from "https://en.wikipedia.org/w/index.php?title=7.35×51mm_Carcano&oldid=1284719220"
Categories:
Hidden categories:

[8]ページ先頭

©2009-2025 Movatter.jp