This package it enables you to connect to yourKindle via SSH. Jailbreaking is a prerequisite.
Contents |
Place the update.bin file within your mrpackage folder under root directory and then install from within mrpackage inside ofKUAL. After install you should be able to control it from the KUAL -> Helper menu
Network information can be seen from search bar ;711USB networking can be toggled by entering ;un into the search box of the menu or from within KUAL menu.Initially only SSH over the USB connection is possible, you can alter whether to SSH into the kindle via Wi-Fi from the configuration file located normally in /mnt/us/usbnet/etc/config or through KUAL menu.
Wi-Fi only SSH access
Auto which starts SSH daemon on boot (can be dangerous)
SSHD or Dropbear SSH server
Tweak Mac Address
ForUSB connection the device will default to 192.168.15.244
ifconfig usb0 192.168.15.201 && ssh root@192.168.15.244
To connect from Windows, you'll need a remote terminal application (two of the popular choices arePuTTy &WinSCP). Plug in your Kindle and wait for Windows to recognize the device. Go to Control Panel > Network and Internet > Network and Sharing Center > Change adapter settings. Find the Local Area Connection # with small text "Unidentified Network, RNDIS/Ethernet Gadget" below, Right click on it and click properties, choose the Internet Protocol Version 4 (TCP/IPv4) and click Properties, click "Use the following IP address" and enter IP address 192.168.15.201, and 255.255.255.0 for the subnet mask, click OK twice. (take a look at the discussion page if you have problems finding the RNDIS connection)Open your remote terminal application, and connect as root to the address 192.168.15.244, leaving the password empty (or use mario if all else fails).
