Instruction Set
Baseline 8-bit PIC® MCU Instruction Set
This applies to the PIC10F2xx, PIC12C5xx, PIC12F5xx, PIC16C5xx, and PIC16F5xx families.
| Byte Oriented Operations | ||||||
|---|---|---|---|---|---|---|
| Mnemonic, Operands | Description | Cycles | 12-bit Opcode MSb……LSb | Status Affected | Notes | |
| ADDWF | f,d | Add W and f | 1 | 0001 11df ffff | C,DC,Z | 1,2,4 |
| ANDWF | f,d | AND W with f | 1 | 0001 01df ffff | Z | 2,4 |
| CLRF | f | Clear f | 1 | 0000 011f ffff | Z | 4 |
| CLRW | Clear W | 1 | 0000 0100 0000 | Z | ||
| COMF | f,d | Complement f | 1 | 0010 01df ffff | Z | |
| DECF | f,d | Decrement f | 1 | 0000 11df ffff | Z | 2,4 |
| DECFSZ | f,d | Decrement f, Skip if 0 | 1(2) | 0010 11df ffff | None | 2,4 |
| INCF | f,d | Increment f | 1 | 0010 10df ffff | Z | 2,4 |
| INCFSZ | f,d | Increment f, Skip if 0 | 1(2) | 0011 11df ffff | None | 2,4 |
| IORWF | f,d | Inclusive OR W with f | 1 | 0001 00df ffff | Z | 2,4 |
| MOVF | f,d | Move f | 1 | 0010 00df ffff | Z | 2,4 |
| MOVWF | f | Move W to f | 1 | 0000 001f ffff | None | 1,4 |
| NOP | No Operation | 1 | 0000 0000 0000 | None | ||
| RLF | f,d | Rotate left f through Carry | 1 | 0011 01df ffff | C | 2,4 |
| RRF | f,d | Rotate right f through Carry | 1 | 0011 00df ffff | C | 2,4 |
| SUBWF | f,d | Subtract W from f | 1 | 0000 10df ffff | C,DC,Z | 1,2,4 |
| SWAPF | f,d | Swap f | 1 | 0011 10df ffff | None | 2,4 |
| XORWF | f,d | Exclusive OR W with f | 1 | 0001 10df ffff | Z | 2,4 |
| Bit Oriented Operations | ||||||
| Mnemonic, Operands | Description | Cycles | 12-bit Opcode MSb……LSb | Status Affected | Notes | |
| BCF | f,b | Bit Clear f | 1 | 0100 bbbf ffff | None | 2,4 |
| BSF | f,b | Bit Set f | 1 | 0101 bbbf ffff | None | 2,4 |
| BTFSC | f,b | Bit Test f, Skip if Clear | 1(2) | 0110 bbbf ffff | None | |
| BTFSS | f,b | Bit Test f, Skip if Set | 1(2) | 0111 bbbf ffff | None | |
| Literal and Control Operations | ||||||
| Mnemonic, Operands | Description | Cycles | 12-bit Opcode MSb……LSb | Status Affected | Notes | |
| ANDLW | k | AND literal with W | 1 | 1110 kkkk kkkk | Z | |
| CALL | k | Subroutine Call | 2 | 1001 kkkk kkkk | None | 1 |
| CLRWDT | Clear Watchdog Timer | 1 | 0000 0000 0100 | TO,PD | ||
| GOTO | k | Unconditional Branch | 2 | 101k kkkk kkkk | None | |
| IORLW | k | Inclusive OR literal with W | 1 | 1101 kkkk kkkk | Z | |
| MOVLW | k | Move literal to W | 1 | 1100 kkkk kkkk | None | |
| OPTION | Load OPTION register | 1 | 0000 0000 0010 | None | ||
| RETLW | k | Return, place literal in W | 2 | 1000 kkkk kkkk | None | |
| SLEEP | Go into standby mode | 1 | 0000 0000 0011 | TO,PD | ||
| TRIS | f | Load TRIS register | 1 | 0000 0000 0fff | None | 3 |
| XORLW | k | Exclusive OR literal with W | 1 | 1111 kkkk kkkk | Z | |
Notes
- The 9th bit of the program counter will be forced to a ‘0’ by any instruction that writes to the PC except for GOTO (see Section 3.5 “Program Counter” for more on program counter).
- When an I/O register is modified as a function of itself (e.g., MOVF PORTB, 1), the value used will be that value present on the pins themselves. For example, if the data latch is ‘1’ for a pin configured as input andis driven low by an external device, the data will be written back with a ‘0’.
- The instructionTRIS f, where f = 5, 6 or 7 causes the contents of the W register to be written to the tri-state latches of PORTA, B or C, respectively. A ‘1’ forces the pin to a high-impedance state and disables the output buffers.
- If this instruction is executed on the TMR0 register (and, where applicable, d = 1), the prescaler will be cleared (if assigned to TMR0)
