TheSAM V71 Xplained Ultra evaluation kit is ideal for evaluating and prototyping with the SAM V71, SAM V70, SAM S70 and SAM E70 ARM^® Cortex^®-M7 based microcontrollers.Arduino shields andXplained Pro add-on boards can be used to add features to this board.

This board has an on-board programmer/debugger (EDBG). No external programmer/debugger is required.

For detailed information on this board (including the user guide), please visit Microchip's main site:

User Guide & More Info >

Features

• ATSAMV71Q21 microcontroller
• One mechanical reset button
• One power switch button
• Two mechanical user pushbuttons
• Two yellow user LEDs
• Supercap backup
• 12.0 MHz crystal
• 32.768 kHz crystal
• 2 MB SDRAM
• 2 MB QSPI Flash
• IEEE 802.3az 10Base-T/100Base-TX with KSZ8061 Ethernet PHY via RMII
• AT24MAC402 256KByte EEPROM with EUI-48 address
• Stereo audio codec - External PLL for precise clock generation. Microphone jack. Headphone jack
• ATA6561 CAN Transceiver
• SD Card connector with SDIO support
• Camera interface connector
• MediaLB connector
• Two Xplained Pro extension headers
• One Xplained Pro LCD header
• Coresight 20 connector for 4-bit ETM
• Arduino due compatible shield connectors
• External debugger connector
• USB interface, device and host mode
• Embedded Debugger
  • Auto-ID for board identification in Atmel Studio
  • One yellow status LED
  • One green board power LED
  • Symbolic debug of complex data types including scope information
  • Programming and debugging
  • Data Gateway Interface: SPI, I2C, four GPIOs
  • Virtual COM port (CDC).
• External power input (5-14 V)
• USB powered

  Return to Top