Choose your operating system from the tabs below:
1
Run Installer
Go to the location where you downloaded the installer. Unzip the downloaded file and run the installer:
harmony_vX_XX_windowsinstall-ier.exe.
Depending on your Windows security settings, you may get a window asking if you are sure you want to run this program. AnswerYes.
2
Setup
ClickNext >.
3
Accept License Agreement
If you concur, select "I accept the agreement" and clickNext >.
4
Select Installation Location
If you wish to choose an installation location other than the default, you may do so here.
ClickNext >.
5
Choose Modules to Install
In some instances you may only want to install modules from the MPLAB® Harmony framework that you plan to use. If this is the case, uncheck any module you do not want to install. This will only save space on your PC. Unused modules willNOT be compiled into your application.
ClickNext >.
6
Begin Installation
ClickNext >.
7
Wait for Installation to Finish
8
Finish Part 1 of Installation
Leave the "View Readme File" box checked - it will provide critical instructions to complete the installation.
ClickFinish.
9
View Readme File for Further Instructions
The readme file briefly describes the need to install two plugins within MPLAB X IDE to use MPLAB Harmony effectively. The instructions are provided in detail in the steps below.
10
Open the MPLAB X IDE Plugin Manager
- Run MPLAB X IDE and open theplugin manager by selecting from the main menu:
Tools ▶ Plugins - Select theDownloaded tab
- Click theAdd Plugins… button on the upper left.
11
Load the MPLAB Harmony Help Plugin
Navigate to the following directory:
C:\microchip\harmony\vX_XX\doc
(whereX.XX represents the version number)
Select the file:
org-microchip-harmony_help.nbm
ClickOpen.
12
Add the Next Plugin
Click theAdd Plugins… button on the upper left.
13
Load the MPLAB Harmony Configurator Plugin
Navigate to the following directory:
C:\microchip\harmony\vX_XX\utilities\configurator
(whereX.XX represents the version number)
Select the file:
com-microchip-harmonyconfigurator.nbm
ClickOpen.
14
Install the Plugins
Click theInstall button at the bottom left of the plugin manager window.
15
Plugin Installer
ClickNext >.
16
Accept the License Agreement
If you concur, check the box next to "I accept the terms in all of the license agreements".
ClickNext >.
17
Dismiss Security Warning
Although the plugins were created and provided by Microchip, they have not been digitally signed. This will trigger a security warning in Windows.
ClickContinue.
18
Plugin Installation Complete
ClickFinish.
19
Verify Installation
If you wish to verify the installation of the plugins, select theInstalled tab. You should see the following two plugins somewhere in the list:
- MPLAB Harmony Help
- MPLAB Harmony Configurator
ClickClose when done.
1
Run Installer
You may need to make the file executable. In a terminal, go to the directory where you downloaded the installer and run the command:
chmod u+x harmony_vX_XX_linuxinstall-ier.run
Then, run the installer (If you plan to install it outside of your home directory, run asroot or usingsudo):
./harmony_vX_XX_linuxinstall-ier.run
2
Setup
ClickNext >.
3
Accept License Agreement
If you concur, select "I accept the agreement" and clickNext >.
4
Select Installation Location
If you wish to choose an installation location other than the default, you may do so here. Note that you cannot install outside of your home directory unless you have write permissions or run the installer as root or by usingsudo.
ClickNext >.
5
Choose Modules to Install
In some instances you may only want to install modules from the MPLAB® Harmony framework that you plan to use. If this is the case, uncheck any module you do not want to install. This will only save space on your PC. Unused modules willNOT be compiled into your application.
ClickNext >.
6
Begin Installation
ClickNext >.
7
Wait for Installation to Finish
8
Finish Part 1 of Installation
Leave the "View Readme File" box checked - it will provide critical instructions to complete the installation.
ClickFinish.
9
View Readme File for Further Instructions
The readme file briefly describes the need to install two plugins within MPLAB X IDE to use MPLAB Harmony effectively. The instructions are provided in detail in the steps below.
10
Open the MPLAB X IDE Plugin Manager
- Run MPLAB X IDE and open theplugin manager by selecting from the main menu:
Tools ▶ Plugins - Select theDownloaded tab
- Click theAdd Plugins… button on the upper left.
11
Load the MPLAB Harmony Help Plugin
Navigate to the following directory:
/home/user/microchip/harmony/vX_XX/doc
(whereX.XX represents the version number)
Select the file:
org-microchip-harmony_help.nbm
ClickOpen.
12
Add the Next Plugin
Click theAdd Plugins… button on the upper left.
13
Load the MPLAB Harmony Configurator Plugin
Navigate to the following directory:
/home/user/microchip/harmony/vX_XX/utilities/configurator
(whereX.XX represents the version number)
Select the file:
com-microchip-harmonyconfigurator.nbm
ClickOpen.
14
Install the Plugins
Click theInstall button at the bottom left of the plugin manager window.
15
Plugin Installer
ClickNext >.
16
Accept the License Agreement
If you concur, check the box next to "I accept the terms in all of the license agreements".
ClickNext >.
17
Dismiss Security Warning
Although the plugins were created and provided by Microchip, they have not been digitally signed. This will trigger a security warning.
ClickContinue.
18
Plugin Installation Complete
ClickFinish.
19
Verify Installation
If you wish to verify the installation of the plugins, select theInstalled tab. You should see the following two plugins somewhere in the list:
- MPLAB Harmony Help
- MPLAB Harmony Configurator
ClickClose when done.
1
Run Installer
Go to the location where you downloaded the installer. Unzip the downloaded file and run the installer:
harmony_vX_XX_osxinstall-ier.app.
Depending on your security settings, you may get a window asking if you are sure you want to open this file. AnswerOpen.
2
Setup
ClickNext >.
3
Accept License Agreement
If you concur, select "I accept the agreement" and clickNext >.
4
Select Installation Location
If you wish to choose an installation location other than the default, you may do so here.
ClickNext >.
5
Choose Modules to Install
In some instances you may only want to install modules from the MPLAB® Harmony framework that you plan to use. If this is the case, uncheck any module you do not want to install. This will only save space on your PC. Unused modules willNOT be compiled into your application.
ClickNext >.
6
Begin Installation
ClickNext >.
7
Wait for Installation to Finish
8
Finish Part 1 of Installation
Leave the "View Readme File" box checked - it will provide critical instructions to complete the installation.
ClickFinish.
9
View Readme File for Further Instructions
The readme file briefly describes the need to install two plugins within MPLAB X IDE to use MPLAB Harmony effectively. The instructions are provided in detail in the steps below.
10
Open the MPLAB X IDE Plugin Manager
- Run MPLAB X IDE and open theplugin manager by selecting from the main menu:
Tools ▶ Plugins - Select theDownloaded tab
- Click theAdd Plugins… button on the upper left.
11
Load the MPLAB Harmony Help Plugin
Navigate to the following directory:
../Users/<yourusername>/microchip/harmony/vX_XX/doc
(whereX.XX represents the version number)
Select the file:
org-microchip-harmony_help.nbm
ClickOpen.
12
Add the Next Plugin
Click theAdd Plugins… button on the upper left.
13
Load the MPLAB Harmony Configurator Plugin
Navigate to the following directory:
../Users/<yourusername>/microchip/harmony/vX_XX/utilities/configurator
(whereX.XX represents the version number)
Select the file:
com-microchip-harmonyconfigurator.nbm
ClickOpen.
14
Install the Plugins
Click theInstall button at the bottom left of the plugin manager window.
15
Plugin Installer
ClickNext >.
16
Accept the License Agreement
If you concur, check the box next to "I accept the terms in all of the license agreements".
ClickNext >.
17
Dismiss Security Warning
Although the plugins were created and provided by Microchip, they have not been digitally signed. This might trigger a security warning.
ClickContinue.
18
Plugin Installation Complete
ClickFinish.
19
Verify Installation
If you wish to verify the installation of the plugins, select theInstalled tab. You should see the following two plugins somewhere in the list:
- MPLAB Harmony Help
- MPLAB Harmony Configurator
ClickClose when done.
