Most of the following development boards haveMPLAB® HarmonyBoard Support Packages (BSPs). The information in the following table was obtained from the schematics found at the end of the Development Board User's Guides.
| Development Board | BSP name | Board Part # | PIC32 Part # | Primary OSC | ICSP Pins |
|---|---|---|---|---|---|
| chipKIT® uC32 | n/a | TDGL017 | PIC32MX340F512 | 8 MHz Crystal | PGED2/PGEC2 |
| chipKIT WF32 | chipkit_wf32 | TDGL021 | PIC32MX695F512L | 8 MHz Crystal | PGED2/PGEC2 |
| chipKIT Wi-FIRE (Rev C) | chipkit_wifire | TDGL021-2 | PIC32MZ2048EFG100 | 24 MHz Clock | PGED2/PGEC2 |
| chipKIT Wi-FIRE (Rev B) | chipkit_wifire | TDGL021-2 | PIC32MZ2048ECG100 | 24 MHz Clock | PGED2/PGEC2 |
| PIC32MX1/2/5 Starter Kit | pic32mx_125_sk | DM320100 | PIC32MX570F512L | 8 MHz Crystal | PGED2/PGEC2 |
| PIC32 Bluetooth Starter Kit | pic32mx_bt_sk | DM320018 | PIC32MX270F256D | 12 MHz Crystal | PGED4/PGEC4 |
| PIC32 Ethernet Starter Kit | pic32mx_eth_sk | DM320004 | PIC32MX795F512L | 8 MHz Crystal | PGED2/PGEC2 |
| PIC32 Ethernet Starter Kit II | pic32mx_eth_sk2 | DM320004-2 | PIC32MX795F512L | 8 MHz Crystal | PGED2/PGEC2 |
| PIC32 USB Starter Kit 2 | pic32mx_usb_sk2 | DM320003-2 | PIC32MX795F512L | 8 MHz Crystal | PGED2/PGEC2 |
| PIC32 USB Starter Kit 3 | pic32mx_usb_sk3 | DM320003-3 | PIC32MX470F512L | 8 MHz Crystal | PGED2/PGEC2 |
| PIC32MZ EC Starter Kit | pic32mz_ec_sk | DM320006 | PIC32MZ2048ECH144 | 24 MHz Clock | PGED2/PGEC2 |
| PIC32MZ EC Starter Kit with Crypto Engine | pic32mz_ec_sk | DM320006-C | PIC32MZ2048ECM144 | 24 MHz Clock | PGED2/PGEC2 |
| PIC32MZ EC with FPU (EF) Starter Kit | pic32mz_ef_sk | DM320007 | PIC32MZ2048EFH144 | 24 MHz Clock | PGED2/PGEC2 |
| PIC32MZ EC with FPU (EF) Starter Kit with Crypto Engine | pic32mz_ef_sk | DM320007-C | PIC32MZ2048EFM144 | 24 MHz Clock | PGED2/PGEC2 |
It is important that youspecify the correct PIC32 pins that are physically connected to your programmer/debugger. If not, you will not be able to debug the PIC32. However, you will still be able to program it.
Higher-pin count PIC32 devices have multiple pairs of pins that can be used forIn-Circuit Serial Programming (ICSP) and debugging. These pins are named PGECx and PGEDx (enhanced versions of the program clock and program data pins).MHC allows you to specify which pair of pins is used for the ICSP connection. It modified the In-Circuit Emulator/Debugger Communication Channel Select (ICESEL) bits in one of the device configuration registers (see the data sheet for details).
