Categories: DSP-FPGA.com |Embedded Computing Design

Analog-to-Digital
Sponsored byAnnapolis Micro Systems, Inc.
()

From Embedded Channels

Analog-to-digital conversion (A/D) and ADC-related articles, columns, blogs, news, and products.

Retrieved from "http://channels.opensystemsmedia.com/Analog-to-Digital"

News
Updated:7am MST
RSS
Top Stories Only
All news
Atom (full text)
Top Stories Only
All news

Recently Published

ByAnnapolis Micro Systems, Inc.:

Additional Analog-to-Digital articles:

Additional Articles

Analog-to-Digital Video

	Video: Annapolis Micro Systems Video Product Demonstration
Annapolis Micro Systems product demonstration by Vice President of Sales Patrick Stover. Annapolis Micro Systems is the leader in COTS FPGA-based high performance computing board level products. Among Annapolis’ leading computing products ar...

	Video: Industry's first working, interoperable OpenVPX demo at MILCOM 2009
From controversy to collaboration: Curtiss-Wright and Hybricon turn the turmoil of VPX into a working OpenVPX collaborative demo.

	Video: 3D instructions on sheet metal stamping
3D documents are an up-and-coming alternative to traditional on-paper technical training manuals. A sample 3D instructional video using 3Dvia by Dassault Systemes illustrates how 3D animation can train technicians to use a sheet metal stamping mac...

	Video: Servicing a jet engine
3D video animation can replace on-technical paper documents, vastly reducing the amount of in-office paper and binders. This video uses Delmia software technology from Dassault Systemes, illustrating how to service a jet engine. The focus is not o...

Vendors and Products

Click on any vendor
to see a listing of
Analog-to-Digital related products.

Sort by:relevance | company

Annapolis Micro Systems, Inc. (1)
- Wildstar 1.5 GHz A/D I/O Card
  Can be mounted on a Wildstar VMEbus or 6U CompactPCI board, Firebird PCI or 3U CompactPCI board, or Virtex II-based motherboards(+)
  Features
  (see all):
  - 8-bit A/D conversion with MAX 104 or MAX 108 converter
  - 1.5 GHz max input sample rate
  - One Virtex E FPGA processing element: XCVE1000 or XCVE2000
  - One Virtex II FPGA processing element: XC2V1000 or XC2V3000
  - Flexible analog input options: transformer only, low filter, low and high filter, or analog down converter
  - Four SMA connectors on front panel: one analog signal input, one trigger, one optional external clock, one optional external local oscillator clock for mixer
  - VHDL model provided for user programmable FPGA implementation
  - Optional RACE, single RACE++, and dual RACE++ interface across the P2 backplane available separately
  - Full CoreFire board support package
  - 3.0 Gbytes/dec I/O bandwidth to motherboard
  - Main board with I/O card(s) installed occupies only a single VMEbus or PCI slot
  - Board and FPGA system speeds up to 150 MHz [...]
Technobox, Inc. (1)
- 2677
  A 2-channel, 12-bit, 10 Msamples/sec, A/D converter with antialiasing filter(+)
  Features
  (see all):
  - Single-wide PMC card form factor
  - Two bipolar, single-ended analog inputs are passed through analog filters to provide initial band limiting
  - Signals are sampled at 20 Msamples/sec and the digital output of each A/D converter is passed through a decimation by 2 function which effectively reduces the sample rate to 10 Msamples/sec
  - Output of the decimation filters are presented to a small FIFO which decouples continuous 10 Msample/sec data from each channel from transient loads on the PCI bus
  - Digital data is in a 16-bit signed-integer format
  - A variety of analog filters are available
  - Analog input range is set by resistors on the board in combination with the analog filter
  - Analog inputs are presented to the board via two SMB-style connectors; three other SMB connectors accept TTL-level inputs for a trigger and an external clock (one for both channels) [...]
KineticSystems Company, LLC (5)
- V213
  32 or 64-channel, 16-bit A/D converter performs data transfer at speeds of up to 1.5 KHz/channel(+)
  Features
  (see all):5685.jpg
  - Single-width, C-size, register-based, VXIbus module that can digitize as many as 64 analog voltage channels
  - The 16-bit ADC scans all channels at a scan rate chosen by the user
  - The V213 has programmable gain that can be set on a channel-by-channel basis, and onboard calibration is available on each channel for end-to-end calibration
  - The base option provides 32 channels of analog input
  - An optional I/O expansion card is available to provide 32 channel of analog input
  - Other I/O expansion cards are available including analog output, and digital I/O
  - Suitable to measure temperature or low voltages [...]
- CP213
  CompactPCI/PXI module with 32 or 64 differential analog input channels that can be configured as 64 or 128 single-ended analog input channels(+)
  Features
  (see all):33130.jpg
  - A 16-bit ADC scans each channel at a user-selected scan rate
  - Scans may be triggered from the internal clock, 1 of 8 PXI backplane triggers, the PXI star trigger bus, or an external SMB connector
  - Plug-and-play drivers included
  - Programmable gain and two channels that are configurable as isothermal reference channels for temperature measurements
  - Includes 16 digital I/O channels that may be configured as digital I/O or attached to a frequency in, counter in or timer out channel
  - Other CompactPCI/PXI cards available are digital I/O, analog output, and high-speed digitizers [...]
- V252
  16-channel, 8-pole analog filter can be used with V207 A/D converter module(+)
  Features
  (see all):
  - All input channels are by differential input
  - 8-pole Bessel, Elliptic, Constant Delay, or Butterworth low-pass filters are provided with standard cutoff frequencies from 100 Hz to 50 KHz, with plug-in headers
  - Sample/hold amplifiers per channel and pre/post-filter gain are optional
  - VXIplug&play; drivers for LabVIEW, Windows, Win95/NT [...]
- V270
  6-channel, 16-bit D/A converter that contains 6 digital-to-analog converters, 1 per channel(+)
  Features
  (see all):
  - Full-scale output is ±10V and loads up to 5 milliamperes can be driven [...]
- V275
  8-channel, 12-bit D/A converter that contains 8 digital-to-analog converters, 1 per channel(+)
  Features
  (see all):
  - Output options are available for 0 to +5V, 0 to +10V, ±2.5V, ±5V, and ±10V [...]
ACCES I/O Products, Inc. (5)
- 104-AIO16-16
  Multifunctional high-speed analog-to-digital and digital-to-analog converter card for PC/104(+)
  Features
  (see all):14717.jpg
  - 16 single-ended/eight differential analog inputs
  - 16-bit resolution, 500 Ksamples/sec conversions
  - Nine input ranges (uni/bipolar)
  - 4096 samples data FIFO for A/D
  - Dual channel DMA capability
  - Two 12-bit digital-to-analog outputs with data buffers
  - Onboard pacer clock and counter timers
  - 16-bit digital I/O
  - Drivers included for Windows 95/98/NT/2000
  - Optional DC/DC converter for 5V-only operation
  - Automatic calibration [...]
- 104-AIM-32
  PC/104 analog signal multiplexer for data acquisition(+)
  Features
  (see all):
  - Card multiplexes and conditions 16 differential or 32 single-ended analog signals before passing them to an analog-to-digital converter card
  - Removable screw terminal block provided for termination of the input signals coming from thermocouples, three-wire RTDs, strain gauges, four 20mA current inputs as well as DC and AC voltage inputs
  - Factory installed bridge completion circuit, current-to-voltage circuit, and current sourcing circuits for the RTDs are optional
  - Input is filtered, amplified, and offset when selected by the multiplexer
  - Includes calibration software [...]
- 104-AIM-32A
  A PC/104 signal-conditioning multiplexer and A/D board(+)
  Features
  (see all):16981.jpg
  - 32 single-ended or 16 differential inputs with flexible gain
  - 12-bit, 8-input, 100-kHz A/D board and cable
  - Software programmable channel by channel input range/gain
  - Six standard analog input ranges
  - System calibration utility
  - +5V @ 240mA power requirement
  - 10/100Base-T Ethernet
  - Extended operating temperature range -40°C to +85°C [...]
- USB-AI Series
  A series of USB analog input modules(+)
  Features
  (see all):36141.jpg
  - Units can sample inputs up to 500 KHz for the board’s 16 single-ended or 8 differential input channels
  - High-speed USB 2.0 device with up to 500 KHz sampling rate
  - All functions fully software configurable
  - 16-bit and 12-bit models with 16 single-ended or 8 differential inputs
  - Eight input ranges, unipolar or bipolar
  - Auto calibration and real-time hardware calibration and oversampling for accurate data
  - Unique channel-by-channel programmable gain feature
  - Data buffer for A/D
  - Synchronous, asynchronous, and timed trigger modes
  - 16 high-current digital I/O lines
  - 16-bit counter/timer for event counting or frequency generation
  - USB/104 form factor for OEM embedded applications [...]
- LPCI-A16-16A
  A high-speed, universal PCI, 16-bit multifunction analog I/O board(+)
  Features
  (see all):25299.jpg
  - 500 KHz sampling rate
  - 16 single-ended or 8 differential inputs, unipolar or bipolar
  - Auto calibration and oversampling for accurate data
  - Unique channel-by-channel programmable gain feature
  - 1024 sample data FIFO for A/D (optional up to 64 k-samples)
  - Two 12-bit D/A outputs and 16 digital I/O lines
  - Software selectable synchronous, asynchronous, and timed trigger modes
  - 11 software/hardware selectable ranges of: 0-1V, 0-2V, 0-4V, 0-5V, 0-10V, ±0.5V, ±1V, ±2V, ±2.5V, ±5V, ±10V
  - Meets Universal PCI and MD2 Low Profile PCI Bus Specification
  - Supported by most operating systems
  - Includes a DOS, Linux, and Windows 95/98/Me/NT/ 2000/2003/XP-compatible software package [...]
Signatec, Inc. (2)
- SIG-PRG
  Portable high-speed data acquisition and waveform generation systems: 2 analog A/D channels at up to 160 MHz sampling rate, 2 analog I&Q; D/A channels, bandwidth 100 KHz to 600 MHz(+)
  Features
  (see all):42051.jpg
  - Two analog signal recording channels at up to 160 MHz sampling rate
  - Two analog I&Q; waveform generation channels at up to 1 GHz sampling rate
  - 16-bit resolution for both the A/D and D/A channels
  - Analog capture bandwidth from 100 KHz to 600 MHz
  - Records and generates continuous analog signals with no break in the signal record at peak 400 MBps data rate
  - Terabytes of data storage, customizable real-time data processing and easy-to-use turnkey system software [...]
- DR-Series Recorders
  A family of Analog-to-Digital Recording Systems(+)
  Features
  (see all):32484.jpg
  - Capable of continuously recording up to 700 MBps direct-to-disk storage without any data loss
  - Data Recording Rate Options of up to 250 MBps (DR250), 350 MBps (DR350), and 700 MBps (DR700)
  - Single Chassis Solutions with up to 18 TB of Integrated Disc Storage
  - 1-6 channels, 8-bit A/D resolution, 1 GHz Sampling Per Channel
  - 1-6 Channels, 14-bit A/D Resolution, 200 MHz Sampling Per Channel
  - 2-12 channels, 14-bit A/D resolution, 100 MHz Sampling Per Channel [...]
WinSystems, Inc. (11)
- Command-based DAQ module
  Command-based intelligent data acquisition system(+)
  Features
  (see all):
  - Onboard processor handles all scheduling, mode selection, calibration control, and data buffer management
  - Eight analog input ranges: 0-1.25 V, 0-2.5 V, 0-5 V, 0-10 V, ±1.25 V, ±2.5 V, ±5 V, and ±10 V
  - 16-bit Analog-to-Digital (A/D) converter
  - Four 12-bit Digital-to-Analog (D/A) converters
  - 16 bits of TTL-compatible, general-purpose digital I/O
  - No adjustment potentiometers or calibration needed
  - Ultra-low-noise DC-DC converter
  - Software programmable interrupt configuration
  - External event sense or clock for conversion control
  - +5 V-only operation
  - Operating temperature of -40 ºC to +85 ºC [...]
- PCM-MIO Multifunction A/D
  Analog and digital I/O on a PC/104 module(+)
  Features
  (see all):41298.jpg
  - 16-bit Analog-to-Digital (A/D) converter
  - Conversion sped: 100K samples per second
  - Two quad 12-bit Digital-to-Analog (D/A) converters
  - Each individual channel is independently software programmable
  - Low-noise onboard DC/DC converter
  - No adjustment potentiometers or calibration needed
  - 48 bi-directional TTL-compatible digital I/O lines with 24 capable of event sense interrupt generation
  - Free software drivers in C, Windows, and Linux
  - +5V-only operation
  - -40° C to +85° C temperature operation
  - Special OEM configurations available for 16-bit D/A and other analog and digital I/O combinations [...]
- Multifunction A/D
  Versatile, PC/104-based analog input, analog output, and digital I/O board designed for industrial applications requiring high-accuracy analog I/O yet requiring no external calibration(+)
  Features
  (see all):33633.jpg
  - Supports optically isolated analog and digital I/O modules for use in harsh industrial environments
  - Two separate 16-bit A/D converters: Each supports 8-channels for a total of 16 single-ended, 8 differential channels or various combinations of both
  - Analog input ranges are: 0-5V, 0-10V, ±5V, and ±10V
  - Eight, 12-bit D/A converters
  - Output ranges: 0-5V, 0-10V, ±5V, ±10V
  - 48 bi-directional digital I/O lines are onboard
  - Free software drivers are available for C, Windows®, and Linux [...]
- A/D & D/A Module
  A versatile, PC/104-based analog input, analog output, and digital I/O board(+)
  Features
  (see all):
  - Multifunction analog and digital I/O module
  - 12-bit or 16-bit A/D converter
  - Eight 12-bit D/A converters
  - 48 bidirectional, TTL-compatible digital I/O lines
  - Low-noise DC/DC converter
  - Each individual channel independently software programmable
  - No adjustment potentiometers or calibration needed
  - Conversion speed: 100 k samples per second
  - Free software drivers in C, Windows, and Linux
  - +5 V-only operation
  - -40 °C to +85 °C temperature operation
  - Special OEM configurations available for 16-bit D/A and other analog and digital I/O combinations [...]
- PCM-ADIO
  A PC/104 industrial data acquisition module(+)
  Features
  (see all):17783.jpg
  - 32 channel, 16-bit analog-to-digital (A/D) converter
  - 4 channel, 12-bit digital-to-analog (D/A) converter
  - 16 lines of digital I/O and event trigger control
  - Onboard microprocessor controls the input ranges, input configurations, conversion rates, FIFO depth, output ranges, calibration, and digital I/O settings
  - TE520 Configurable System-on-Chip (CSoC)
  - Each channel can be independently configured as single ended or differential input
  - Eight different input ranges
  - Variable conversion intervals
  - Allocation of the 32 KB FIFO by a simple command structure
  - Input ranges are 1.25, 2.5, 5, and 10 volts either unipolar or bipolar
  - No missing codes and the measurements are monotonic over the full temperature range from –40ºC to +85ºC
  - Four independent 12-bit D/A converters
  - Each channel can be updated or cleared independently or simultaneously
  - Output voltage ranges are 0-5V, 0-10V, ±2.5V, ±5V, ±10V
  - 16 lines of digital I/O organized into two, 8-bit bytes configured as input or output
  - Lines are TTL-compatible and can source and sink 12mA [...]
- Low-cost A/D & D/A
  Low-cost PC/104 A/D and D/A modules operate from -40 °C to +85 °C yet don’t require calibration(+)
  Features
  (see all):45416.jpg
  - Multifunction Analog and Digital I/O modules
  - Standard configuration: 16-bit A/D, 12-bit D/A, 48-lines of digital I/O
  - Software programmable interrupt configuration
  - No adjustment potentiometers or calibration needed
  - Free software drivers in C, Windows, and Linux
  - 90 mm x 96 mm expansion boards for industrial, medical, security, transportation, and Mil/COTS applications
  - Based upon Linear Technologies' precision converters and voltage references, these cards do not require calibration which results in quick, easy setup; plus it eliminates the necessity for readjustment and recalibration to installed units in the field
  - The input ranges for the PCM-MIO-G-AD-1 are 0-5V, ±5V, 0-10V and ±10 volts
  - Two independent, 16-bit A/D converters support up to 16 single-ended or 8 differential channels or various combinations of both
  - The conversion speed is 100K samples/sec
  - The PCM-MIO-G-DA-1 has eight independent, 12-bit D/A converters on board
  - The output voltage ranges are 0-5V, 0-10V, ±5V, and ±10V
  - All output channels are programmable and can be updated and cleared individually or simultaneously
  - Both the PCM-MIO-G-AD-1 and PCM-MIO-G-DA-1 boards have 48 lines of digital I/O individually programmable for input, output, or output with read-back
  - The lines are TTL-compatible and can sink 12 mA which supports direct connection to industry-standard, optically isolated AC and DC signal conditioners
  - Isolated signal conditioners protect, filter, and isolate the analog input and output signals from electrical transients
  - [...]
- PCM-MIO
  A high-density analog and digital PC/104 I/O card that operates from -40 °C to +85°C(+)
  Features
  (see all):30336.jpg
  - Two standard configurations available: 16-bit A/D, 12-bit D/A, 48 DIO or 12-bit A/D, 12-bit D/A, 48 DIO
  - No adjustment potentiometers or calibration needed
  - Software programmable interrupt configuration
  - Free software drivers in C, Windows, and Linux
  - Conversion speed: up to 100 KSps, throughput about 85 KSps (processor dependent)
  - Analog input ranges: 0-5 V, 0-10 V, ±5 V, and ±10 V
  - 48 bidirectional TTL-compatible DIO lines with 24 capable of event-sense interrupt generation [...]
- PCM-A/D12/16
  16-bit successive approximation analog-to-digital converter capable of operation over a -40°C to +85°C temperature range with no missing codes(+)
  Features
  (see all):1345.jpg
  - Up to 16 single-ended or 8 differential input channels can be selected
  - Supports input of 0V to +5V and ±10V
  - The conversion rate is 30 microseconds/channel
  - Each channel has overvoltage protection and is able to withstand continuous analog input voltages of ±30V and brief input transient spikes [...]
- PCM-AIO
  A 12-bit analog I/O PC/104 board(+)
  Features
  (see all):7010.jpg
  - 8-channel, 12-bit A/D with 0 to +5V or ±2.5V
  - 100 kHz sampling rate
  - SE or DI, unipolar or bipolar
  - Two 12-bit D/A channels: 0 to +5V or ±5V
  - 0°C to +65°C operating temperature range [...]
- Multifunction A/D
  No adjustment or calibration required(+)
  Features
  (see all):
  - 16-bit A/D converter
  - Eight, 12-bit D/A converters
  - Onboard low noise DC/DC converter
  - 48 bi-directional digital I/O lines
  - -40 ºC to +85 ºC temperature operation [...]
- PCM-D/A12
  "No tweak" 12-bit digital-to-analog converter module incorporates non-adjusting, laser-trimmed devices and eliminates onboard potentiometers(+)
  Features
  (see all):1135.jpg
  - Provides 8 independent channels with voltage ranges of 0V to +5V, 0V to +10V, and ±10V
  - Available without onboard DC/DC converter [...]
Tektronix, Inc (2)
- MSO70000
  MSO70000 Series combine industry-leading bandwidth of 20 GHz with the industry's highest waveform capture rate, best signal fidelity, and lowest noise floor(+)
  Features
  (see all):43310.jpg
  - Discover Problems in Seconds – With 4 channel analog bandwidth ranging from 4 to 20 GHz depending on model, the MSO70000 offers up to 5 times more bandwidth and 5 times better timing resolution than the fastest integrated MSOs currently available – enabling greater signal visibility for problem discovery
  - It provides record lengths up to 250 million points and sample rates of 50 GS/s analog and 12.5 GS/s digital
  - This uncompromised performance means that engineers can capture long duration events with high sample resolution and have time-correlated views of high-speed analog and digital data
  - Capture Events the First Time – For MSOs to deliver true value, customers need reliable and convenient access to capture both analog and digital signals of interest, as well as excellent signal integrity from the probing system
  - The MSO70000 delivers on this front with a comprehensive set of innovative solder-in probe accessories which make connecting to vias and fine pitch components on tightly packed boards easier, in order to acquire digital control signals such as the DDR command bus
  - The Tektronix toolset for DDR probing now also includes new BGA interposers for all variants of DDR3 and DDR2 memory components, providing access to all signals with excellent fidelity
  - Coupled with the ground-breaking iCapture™ technology which allows internal routing of selected digital signals to the analog channels for full analog evaluation – the MSO70000 is ideal for fine pitch, highly sensitive board layouts
  - Search Entire Records Quickly – With its iCapture feature, the MSO70000 provides analog views on any connected digital channel, enabling unsurpassed versatility and debugging insight across all 20 channels
  - The MSO70000 Series provides extensive triggering capabilities including serial pattern, mixed analog and digital, logic pattern, and bus state triggers that designers can combine to isolate system faults that only occur during particular system states
  - The MSO70000 series provides extremely tight timing synchronization between the analog and digital subsystems, with timing correlation as close as 80ps is possible, resulting in a much easier determination of cause and effect in circuit operation
  - Analyze Devices & Busses Efficiently – With over 30 different analysis suites running on the MSO70000 Series, customers can select from the newly available I2C and SPI bus analysis, DPOJET for jitter and eye diagram analysis, DDRA for DDR Memory Bus Verification, SDLA for EQ/channel emulation and analysis, and SignalVu for Frequency Domain display and analysis [...]
- MSO3000
  The MSO3000 series provides the embedded system designer with the ability to visualize and analyze analog, digital and serial signals on a single instrument(+)
  Features
  (see all):42340.jpg
  - Four analog and 16 digital channels
  - 100 to 500 MHz bandwidth
  - 5M record length and 2.5 GS/s analog sample rate for system debug [...]
Dataforth Corporation (1)
- 8B isoLynx SLX300
  This new DAQ system builds on the proven reliability of the SCM5B SLX200 and SensorLex 8B isolated SCMs to provide a compact, low cost solution for many industrial applications(+)
  Features
  (see all):46705.jpg
  - 1500Vrms Input-to-Output & Channel-to-Channel Isolation
  - Analog and digital isolation on one PCB, allowing unrivaled flexibility of analog and digital channel configuration
  - I/O Selection - Analog: 15 Product Families, 70 Models - Digital : 5 Product Families, 14 Models
  - Simultaneous analog and digital I/O at sustained rates up to 3.0kS/s, high-speed acquisition to 100kS/s burst
  - Modbus RTU and TCP Support
  - Configure with up to 12 channels of isolated analog input, 4 channels of isolated analog output, and 8 channels of isolated digital I/O
  - 7 different advanced special functions on digital I/O channels
  - Dedicated ReDAQ® Shape software [...]
Memec (1)
- P160 Communications Module 3 Kit
  Ideal for Xilinx embedded MicroBlaze eystems(+)
  Features
  (see all):19946.jpg
  - Adds Ethernet, Bluetooth, and analog I/O to Popular Memec Spartan-3 LC Board
  - Small, low-cost daughter card form-factor
  - Enables designers to add a standard set of processor peripherals and bulk memory to any P160 compatible system board
  - Can be used on Xilinx Virtex-II Pro and Virtex-4 platforms inaddition to Spartan-based MicroBlaze designs
  - Onboard 10/100 Ethernet MAC and PHY chip
  - Eliminates need for fabric-based MAC in the FPGA and frees resources in smaller density FPGAs
  - 8-channel, 14-bit 48 KSps analog-to-digital converter provides analog signal input capabilities
  - 2-channel, 12-bit 3µs digital-to-analog converter provides analog output signals
  - Ideal for industrial control and instrumentation applications
  - Contains 1Mx32 Flash and 256Kx32 high-speed SRAM (10 ns) for code and data storage in processor-based applications
  - Simple 3-bit VGA interface (RGB), real-time clock (RTC) and easy-to-use Bluetooth module, which allows for easy setup of serial port style links [...]
Mesa Electronics (1)
- 7I65 Octal Analog
  The 7I65 is a eight axis analog servo interface intended for operation with MESA's Anything I/O cards in motion control applications(+)
  Features
  (see all):39589.jpg
  - Eight 16 bit DAC channels and eight TTL or differential encoder inputs
  - In addition, 7I65 has eight 12 bit + sign A-D inputs, eight isolated motor enable outputs and four isolated digital inputs
  - Analog outputs have software selectable ranges that include -10 V to +10 V, -5 V to +5 V, 0 V to +5 V and 0 V to +10 V
  - Analog inputs also have software selectable ranges including -10V to +10V, -5V to +5V, -2.5V to +2.5V and 0V to +5 V
  - Input and output ranges can be selected on a channel by channel basis
  - Galvanically isolated from system logic ground to prevent ground loops and digital noise from interfering with the analog signals. A built in watchdog timer sets the analog outputs to 0V if the 7I65 has not been accessed within the settable watchdog timer interval
  - An on card EEPROM allows analog gain and offset values to be stored for software controlled calibration
  - The 7I65 conditions the encoder input signals with input filters for TTL inputs or RS-422 receivers for differential encoder inputs [...]
Measurement Computing Corporation (10)
- PCI-DAS4020/12
  A PCI bus-compatible, 4-channel, 12-bit analog input board with two analog output channels(+)
  Features
  (see all):
  - 20-MHz sample rate
  - 12-bit A/D resolution
  - Four analog input channels
  - Software-selectable input ranges
  - One A/D converter per channel
  - Bus-master and scatter-gather capability
  - Dual 12-bit D/A converter
  - Analog and digital triggering
  - 24 bits of digital I/O
  - Fully plug-and-play compatible
  - Fully autocalibrating [...]
- CPCI-DAS4020/12
  An analog input board with four 20 MHz, 12-bit analog inputs(+)
  Features
  (see all):
  - Each input channel has an independent A/D converter that allows the sampling of all four inputs simultaneously at 20 MHz
  - Plug-and-play compatible
  - Board addresses and interrupt channels are set by software
  - System timing control chip controls all A/D sampling
  - 128-Ksample A/D FIFO buffer
  - Analog and digital input triggering with pre-trigger, post-trigger, and about-trigger sampling
  - Bus-mastering and scatter-gather functionality
  - Provides ±1V and ±5V input ranges [...]
- 7000 Series
  A series of Message-Based DAQ (MBD) protocol comprising the USB-7202 and USB-7204 boards, which are multifunction measurement and control devices intended specifically for the MBD protocol(+)
  Features
  (see all):43113.jpg
  - Combines small form factor, bus-powered USB hardware and a light and agile software framework that can be ported to multiple operating systems
  - MBD is software framework and a core technology to the series
  - MBD is a well-defined protocol that permits the programming of DAQ devices using simple text-based messages
  - MBD protocol greatly simplifies driver and application development, because all DAQ operations are programmed through a common command interface, which is composed of a consistent, extensible firmware interface and an open-source, cross-platform API
  - Firmware parses text-based messages transmitted through a device driver and converts these messages into DAQ-specific commands that control the device
  - This concise and well-documented interface allows driver development for multiple operating systems, and also supports O/S-independent embedded systems that need to communicate only over a USB root port Intended primarily for OEM applications, both are shipped as open stackable PC/104-sized boards without enclosures
  - USB-7202 features: Eight analog input channels; 16-bit resolution; 100 KSps max total throughput; simultaneous sampling (1 A/D converter per input); one 32-bit event counter; external digital trigger input; external pacer; eight digital I/O lines; detachable screw terminals
  - USB-7204 features: Eight single-ended, or four differential, analog inputs; two 12-bit analog outputs; 12-bit (differential), 11-bit (single-ended); up to 50 KSps sample rate; 16 digital I/O lines; detachable screw terminals [...]
- USB-1616FS
  A USB-based analog and digital I/O module(+)
  Features
  (see all):
  - 16 single-ended analog inputs
  - 16-bit resolution
  - Simultaneous input sampling (one A/D converter per input)
  - 50 KSps maximum sample rate (per channel)
  - Up to 150 KSps total module throughput
  - 8 bits of DIO
  - Includes TracerDAQ application suite, SoftWIRE drivers, LabVIEW drivers and VIs, and Universal Library programming language drivers [...]
- PMD-1608FS
  A USB-based DAQ module(+)
  Features
  (see all):17489.jpg
  - Eight simultaneously sampled, 16-bit analog inputs with continuous multichannel sample rates up to 100 KS/s and burst sample rates up to 200 KS/s
  - 8 bits of digital I/O and a 32-bit counter
  - 8 independent 50 KHz A/D converters, 1 per analog input
  - 16-bit resolution; accuracy guaranteed to ±2.98 mV (±5V range)
  - Simultaneous sampling up to 100,000 samples/sec total throughput
  - Includes TracerDAQ, professional grade strip chart recorder and data logger application, source code available
  - Universal Library programming language support for Windows languages
  - C Source code driver for OEM adaptation or other OS support (by request)
  - External digital trigger input
  - USB 1.1 and 2.0 compatible device supported under Microsoft Windows 98SE/Me/2000/XP
  - Drivers for LabVIEW, SoftWIRE, LABTECH, and Windows programming languages [...]
- PCI-DAS6031
  64 channels of 16-bit A/D resolution(+)
  Features
  (see all):
  - 100 kS/s maximum sample rate
  - 8 digital I/O bits and 2 counter/timers
  - Triggering of measurement and control via both analog and digital signals
  - Easy synchronization of multiple measurement boards [...]
- PC104-DAS08
  A PC/104 form factor, analog I/O module(+)
  Features
  (see all):
  - Eight channel single-ended
  - 12-bit, 20 kHz A/D
  - Three counters
  - Seven bits digital I/O
  - Input ranges are ±10V, ±5V, 0 to +10V, switch selectable
  - Unipolar/bipolar, switch selectable
  - A/D pacing is through internal counter or external source (interrupt input, jumper selectable, rising edge) or software-polled
  - Includes InstaCal installation, calibration, and test software
  - Supported by Universal Library
  - Supported by most third party, high-level data acquisition programs [...]
- AI-EXP32
  The AI-EXP32 doubles the analog input capacity of either of the USB-2416 series modules from Measurement Computing(+)
  Features
  (see all):
  - 16 differential or 32 single-ended analog inputs
  - 24-bit resolution
  - Nine software-selectable ranges: ±20 V, ±10 V, ±5 V, ±2.5 V, ±1.25 V, ±0.625 V, ±0.312 V, ±0.156 V, and ±0.078 V
  - Any of the analog inputs can be configured for thermocouples (up to 16 differential)
  - Eight lines of high-drive digital I/O
  - Two 32-bit counters [...]
- LGR-5320 Series
  Stand-Alone, High-Speed, Multifunction Data Loggers(+)
  Features
  (see all):
  - Up to 200 kS/s correlated sampling of all data
  - 16 analog inputs up to ±30 V
  - 16-bit resolution
  - 16 industrial digital inputs up to 30 V (500 V isolation available)
  - Single Form C relay digital output configurable for triggering/alarming
  - 4 counter inputs - conventional or quadrature available
  - Detachable screw terminals
  - 4 GB SD memory card included, supports up to 32 GB
  - Analog and digital multi-channel triggering
  - Push-button controls for field operation
  - Included DAQLog software
  - Supported Windows Operating Systems: Windows 7/Vista/XP SP2, 32-bit or 64-bit [...]
- PMD-1208LS
  A USB-based data acquisition module(+)
  Features
  (see all):17875.jpg
  - Eight single-ended or four differential 12-bit analog inputs
  - two 10-bit analog outputs
  - One 32-bit external event counter
  - Built-in screw terminals
  - 16 digital I/O lines
  - External trigger input
  - USB 1.1 and 2.0-compatible device, supported under Microsoft Windows 98SE/ME/2000/XP
  - Drivers for LabVIEW, SoftWIRE, LABTECH, and Windows programming languages
  - OEM version available without case [...]
General Standards Corporation (15 29)
- cPCI66-16AISS8AO4
  12-channel, 16-bit PMC analog input/output board with eight simultaneously sampled analog inputs, four analog outputs, and input sampling rates to 2.0 MSPS per channel(+)
  Features
  (see all):
  - Analog inputs: 8 differential analog inputs with dedicated 16-bit ADC per channel; true simultaneous sampling of all Inputs to 2.0 MSPS per channel
  - Analog outputs: 4 single-ended analog outputs with dedicated 16-Bit DAC per channel; Simultaneous output clocking rates to 1.0 MSPS per channel
  - Selectable Input/Output ranges: ±10V, ±5V, ±2.5V
  - Independent 256-K sample Input and Output FIFO Data Buffers
  - 16-bit bidirectional TTL digital I/O port
  - 66 MHz 32-bit PCI support, with universal signaling [...]
- CPCI-16DSI-VHS
  A versatile multifunction analog I/O board(+)
  Features
  (see all):
  - The board has 8 analog inputs and 8 analog outputs per board and supports arbitrary waveform generation
  - A single 16-bit scanning Analog-to-Digital converter scans 8 single-ended or 4 differential inputs at an aggregate rate of 72,500 samples per second into the 32,000 sample storage FIFO
  - Up to 250,000 samples per second aggregate output update rates for the 8 D/A channels. Analog outputs are double-buffered and allow for software or hardware (synchronized) strobes for output updating
  - I/ O ranges are ±2.5, ±5.0, and ±10.0 volts
  - Output FIFO buffers provide up to 16,000 sample capacity
  - Advanced features include: Loopback for Built-in-Test support, automatic calibration, continuous or burst input scanning modes, and runtime calibration trimming implemented in hardware, without host CPU intervention [...]
- PMC66-16AISS8AO4
  12-Channel, 16-Bit PMC Analog Input/Output Board with eight simultaneously sampled analog Inputs, four analog outputs, and Input Sampling Rates to 2.0 Msps per channel(+)
  Features
  (see all):35127.jpg
  - Analog Inputs: 8 Differential Analog Inputs with Dedicated 16-Bit ADC per Channel; True Simultaneous Sampling of all Inputs to 2.0 Msps per channel
  - Analog Outputs: 4 Single-Ended Analog Outputs with Dedicated 16-Bit DAC per Channel; Simultaneous Output Clocking Rates to 1.0 Msps per Channel
  - Selectable Input/Output Ranges: ±10V, ±5V, ±2.5V
  - Independent 256-Ksample Input and Output FIFO Data Buffers
  - Hardware Clock and Sync I/O for Multiboard Operation
  - Hardware Clock and Sync I/O for Multiboard Operation [...]
- CPCI-12AISS8AO4
  12-channel, 12-bit CompactPCI Analog Input/Output board with eight 2.0 MSPS per Channel Analog Inputs, simultaneous input sampling, wide-range analog inputs; ±100 mV to ±10 V Full-scale(+)
  Features
  (see all):
  - 8 Differential Analog Inputs with Dedicated 12-Bit, 2.0 MSPS ADC per Channel
  - True Simultaneous Sampling of all Inputs; Minimum data skew
  - Sampling rates to 2.0 MSPS per Channel (16 MSPS Aggregate Rate)
  - Software-selectable input ranges: ±10 V, ±1 V, ±100 mV; 112 dB dynamic range
  - Four Analog Output channels with 12-bit DAC per Channel and 1.0 MSPS clocking
  - Software-selectable Output Ranges: ±10 V, ±5 V, ±2.5 V
  - 16-bit Bidirectional Digital I/O Port
  - 64-Ksample FIFO Analog Input Data Buffer
  - DMA Engine Supports both Block-Mode and Demand-Mode Transfers
  - Sampling controlled by internal rate generator, by software trigger, or externally
  - On-demand Internal Autocalibration
  - Hardware Sync I/O for multiboard operation [...]
- PMC-12AISS44AO4
  12-Channel, 12-bit PMC analog input/output board with eight simultaneously sampled wide range Inputs at 2.0 MSPS per channel, four analog outputs, and 16-bit digital I/O port(+)
  Features
  (see all):
  - 8 differential analog inputs with dedicated 12-bit, 2.0 MSPS ADC per channel
  - True simultaneous sampling of all Inputs; Minimum Data Skew
  - Sampling rates to 2.0 MSPS per channel (16 MSPS aggregate rate)
  - Input ranges: ±1 V, ±100 mV; Factory configured
  - Custom ranges to ±10 V
  - 64-Ksample Analog Input FIFO Data Buffer
  - 4 analog output channels with Direct Register Access
  - 16-bit bidirectional Digital I/O port
  - Sampling controlled by Internal Rate Generator, by software trigger, or externally
  - Hardware sync I/O for multiboard operation
  - Completely software-configurable; no field jumpers
  - Conforms to PCI Local Bus Specification, Revision 2.3, with Universal Signaling [...]
- cPCI-12AISS44AO4
  12-channel, 12-bit PMC Analog Input/Output board with eight simultaneously sampled wide-range inputs at 2.0 MSPS per channel, four analog outputs, and 16-bit Digital I/O port(+)
  Features
  (see all):
  - 8 differential analog Inputs with Dedicated 12-bit, 2.0 MSPS ADC per channel
  - True Simultaneous Sampling of all Inputs
  - Minimum data skew
  - Sampling rates to 2.0 MSPS per channel (16 MSPS Aggregate Rate)
  - Input Ranges: ±1 V, ±100 mV; Factory configured
  - Custom ranges to ±10 V
  - 64-Ksample Analog Input FIFO Data Buffer
  - Supports DMA transfers in two channels in Block-Mode or Demand-Mode
  - 4 analog output channels with Direct Register Access
  - 16-bit bidirectional Digital I/O Port
  - Sampling controlled by Internal Rate Generator, by Software Trigger, or Externally
  - Hardware Sync I/O for multiboard operation
  - Conforms to PCI Local Bus Specification, Revision 2.3, with Universal Signaling [...]
- PC104P-16AIO88
  Versatile multifunction analog I/O board for PC/104-Plus(+)
  Features
  (see all):
  - Eight analog inputs
  - Eight analog outputs per board
  - Supports arbitrary waveform generation
  - Single 16-bit analog-to-digital converter scans eight single-ended or four differential inputs at an aggregate rate of 72,500 samples/sec into the 32,000-sample storage FIFO
  - Up to 250,000 Samples/sec aggregate output update rates for the eight D/A channels
  - Analog outputs are double-buffered and allow for software or hardware (synchronized) strobes for output updating
  - I/O ranges are ±2.5V, ±5.0V, and ±10.0V
  - Output FIFO buffers provide up to 16,000-sample capacity
  - Advanced features include: loopback for built-in-test support, automatic calibration, continuous, or burst input scanning modes, and runtime calibration
  - Trimming implemented in hardware, without Host CPU intervention
  - VxWorks driver is available for both PowerPC and Pentium [...]
- PC/104-ADADIO
  12-channel board for PC/104-Plus(+)
  Features
  (see all):11893.jpg
  - High-resolution 16-bit analog input
  - Analog output and digital I/O
  - Samples eight analog input channels simultaneously
  - Inputs can be sampled continuously or can be burst-sampled (up to 200,000 samples per channel for an aggregate rate of 1,600,000 samples per second)
  - Inputs are converted and stored in a 32,000-sample FIFO buffer
  - The four analog output channels are accessed through independent registers and can be updated either synchronously or asynchronously
  - Inputs and outputs have a factory-configured range of ±10V, ±5V, or ±2.5V
  - Digital port provides eight bidirectional data lines and two control lines
  - VxWorks, Windows NT, Windows 2000, Linux, LabVIEW, QNX, Spectrum, and MATLAB drivers are available [...]
- PMC-ADADIO
  A 12-channel analog I/O PMC mezzanine(+)
  Features
  (see all):
  - Provides 16-bit analog input, analog output, and digital I/O
  - Eight analog input channels are sampled simultaneously
  - Inputs can be sampled continuously or burst-sampled (up to 200 Ksamples/channel for an agregate rate of 1.6 Msamples/sec)
  - Inputs are converted and stored in a 32 Ksample FIFO buffer
  - Four analog output channels are accessed through independent registers, and can be updated either synchronously or asynchronously
  - I/O has a factory-configured range of ±10V, ±5V, or ±2.5V
  - A digital port provides eight bidirectional data lines and two control lines
  - VxWorks, Linux, and Win2000 drivers available [...]
- CPCI-ADADIO
  A 12-channel analog I/O board that provides high-resolution 16-bit analog input, analog output, and digital I/O(+)
  Features
  (see all):3520.jpg
  - Eight analog input channels are sampled simultaneously
  - Inputs can be sampled continuously or burst-sampled (up to 200,000 samples/channel for an aggregate rate of 1,600,000 samples/sec)
  - The inputs are converted and stored in a 32,000 sample FIFO buffer
  - The four analog output channels are accessed through independent registers, and can be updated either synchronously or asynchronously
  - Inputs and outputs have a factory-configured range of ±10V, ±5V, or ±2.5V
  - A digital port provides eight bidirectional data lines and two control lines [...]
- PMC66-16AISS16AO2
  16-Bit, 18-Channel, 1.0-MSPS PMC Analog Input/Output Board With 16 Simultaneously Sampled Analog Inputs, Two Analog Outputs, and Input Sampling Rates to 1.0 Msps per channel(+)
  Features
  (see all):35126.jpg
  - The 16-Bit analog I/O module samples and digitizes 16 input channels simultaneously at rates up to 1.0 million samples per second per channel, and the resulting 16-bit sampled data is available to the PCI bus through a 256K-Sample FIFO buffer
  - Sampling can be controlled in groups of 1 through 16 channels, and the sample clock can be generated either from an internal rate generator, or by software or an external source
  - Both burst and continuous sampling modes are supported, and input ranges are software-selectable as ±10V, ±5V or ±2.5V
  - The inputs are divided into two channel groups, with an independent software-controlled range assignable to each group
  - Two analog output channels provide software-selected output ranges of ±2.5V, ±5V or ±10V that are independent of the input range assignments
  - The outputs are accessed either directly through two dedicated control registers, or through a 256K-Sample FIFO buffer for waveform generation. Four bidirectional digital I/O lines are programmable as inputs or outputs [...]
- PMC-16AIO88
  A multifunction analog I/O PMC board(+)
  Features
  (see all):
  - Board has eight analog inputs and eight analog outputs and supports arbitrary waveform generation
  - A single 16-bit scanning ADC scans eight single-ended or four differential inputs at an aggregate rate of 72,500 samples/sec into the 32,000-sample storage FIFO
  - Up to 250,000 samples/sec aggregate output update rates for the eight D/A channels
  - Analog outputs are double-buffered and allow for software or hardware (synchronized) strobes for output updating
  - I/O ranges are ±2.5V, ±5V, and ±10V
  - Output FIFO buffers provide up to 16,000-sample capacity
  - Also available in PCI, CompactPCI, and PC/104-Plus form factors [...]
- cPCI-16AIO88
  Eight analog output channels with a 16-bit D/A converter per channel(+)
  Features
  (see all):
  - 16-bit scanning ADC for 8 single-ended or 4 differential analog input channels
  - Input and output ranges available as ±10V, ±5V, or ±2.5V
  - Input and output FIFO buffers, 32 Ks input, 16 Ks output capacity
  - Aggregate analog output data rates to 250K channels per second
  - Simultaneous updating of outputs with hardware or software strobe
  - A/D inputs scanned at up to 73 Ksps aggregate rate, 9.5 Ksps to 16.2 KSps per channel
  - Continuous or burst input scanning modes, hardware and software triggering
  - Programmable rate generator supports both inputs and outputs
  - Autocalibration trimming implemented in hardware without host intervention
  - Supports DMA transfers as bus master
  - Loopback feature for Built-In Test (BIT) support and periodic autocalibration
  - Integral shield assures minimum susceptibility to radiated noise in CompactPCI environments
  - VxWorks driver available for both PowerPC and Pentium [...]
- PMC-12AIO
  A high-speed 12-bit analog I/O and digital I/O PMC mezzanine(+)
  Features
  (see all):
  - Four analog output channels (at 300,000 samples/sec per channel) are updated either synchronously or asynchronously, and support arbitrary waveform generation
  - Analog inputs are configurable as either 32 single-ended or 16 differential inputs, and can be scanned continuously or in bursts
  - Inputs and outputs have a common software selected range of ±10V, ±5V, or ±2.5V, and are accessed through independent 32 Ksample FIFO buffers
  - Internal auto-calibration networks permit calibration to be performed without removing the board from the system
  - Software controlled test configurations include a loop-back mode for monitoring all analog output channels
  - Operating system support includes VxWorks and Windows NT drivers [...]
- PMC-16AIO
  A high-speed 16-bit analog I/O and digital I/O PMC mezzanine(+)
  Features
  (see all):
  - Four analog output channels (at 300,000 samples/sec per channel) are updated either synchronously or asynchronously, and support arbitrary waveform generation
  - Analog inputs are configurable as either 32 single-ended or 16 differential inputs, and can be scanned continuously or in bursts
  - Inputs and outputs have a common software selected range of ±10V, ±5V, or ±2.5V, and are accessed through independent 32 Ksample FIFO buffers
  - Internal auto-calibration networks permit calibration to be performed without removing the board from the system
  - Software controlled test configurations include a loop-back mode for monitoring all analog output channels
  - Operating system support includes VxWorks and Windows NT drivers [...]
Traquair Data Systems, Inc. (1)
- ORS-11x
  Multi-channel analog interfaces with a user-programmable Spartan-IIE or Virtex-II FPGA, providing developers with the means to implement FPGA-based digital signal processing solutions(+)
  Features
  (see all):31753.jpg
  - Can be used as stand-alone devices with the user-programmable FPGA responsible for supporting all signal processing functionality, or as daughtercards to micro-line DSP/FPGA boards
  - A variety of multi-channel A/D/A configurations are supported: 2-channel 14-bit A/D/A with ADC sample rates up to 65 MSps; 4-channel 16-bit A/D/A with ADC sample rates up to 2.5 MSps; 12-channel A/D/A with ADC sample rates up to 250 KSps
  - If the capabilities of a Texas Instruments TMS320C6000 DSP processor are required, an ORS-11x board can be fitted as a daughtercard to a TMS320C6000-based micro-line embedded DSP/FPGA board
  - micro-line embedded DSP/FPGA boards combine the latest TMS320C6713 floating point and TMS320C64xx integer DSP processors with user-programmable high density FPGAs, in small, cost-optimized configurations
  - VHDL FPGA programming packages are available for all ORS-11x board configurations, allowing users to implement custom logic or processing algorithms
  - Support for Xilinx System Generator for DSP and Matlab Simulink is also being introduced, and is already available as an option for the ORS-114
  - System Generator for DSP, the Simulink add-on from Xilinx, takes a graphical approach to algorithmic design and extends Simulink for FPGA development [...]
DRS Technologies (3)
- Nimble
  A high-speed data acquisition board(+)
  Features
  (see all):
  - Versatile design consists of separate digital motherboard and A/D daughter card
  - Daughter cards exist for a variety of A/D ICs which allow NIMBLE to conform to specific performance needs
  - All digital signals driving the analog daughter card are opto-coupled for total isolation (for Fs < 30 MHz)
  - Analog daughter card receives its power from separate linear supply for clean operation and digital isolation
  - Daughter cards range from 10 bits to 16 bits with sampling rates beyond 41 Msamples/sec
  - Digital sampling control including Frame Start, Sample Gate, and Delay Counter 6U x 160mm VMEbus single slot form factor
  - VMEbus slave interface (A16/A24, D32)
  - Optional VSB master allows NIMBLE to download data to off-the-shelf memory boards and general purpose machines
  - High-speed front panel parallel port (directly compatible with CRI DSP boards)
  - Onboard FIFO (up to 64K samples deep for one channel; 32K samples deep for dual channel configurations)
  - Front panel SMA inputs for analog input channels, Convert Clock, Frame Start, and Sample Gate
  - Supports either external source or onboard crystal for convert clock
  - Various input impedance and voltage ranges available
  - Power for digital motherboard: 2.6A @ +5V
  - Power for an analog daughter card varies with the model, but +12V @ 0.7A and –12V @ 0.3A is typical (based upon NIM8 daughter card) [...]
- Phoenix VME
  High-speed Analog to Digital processing for VMEbus(+)
  Features
  (see all):
  - Daughtercard selectable A/D converters
  - Up to 200Msamples/sec
  - High speed front panel parallel port output
  - Dual channel design
  - FIFO up to 256K sampleschannels
  - Channel data storage and burst
  - Data packing capability
  - D64 MBLT initiator
  - External linear power supply port for D/C
  - Supports external sampling clock
  - Supports internal sampling oscillator
  - Analog resolution up to 90+dB SFDR [...]
- Phoenix cPCI
  High-speed Analog to Digital processing for CompactPCI(+)
  Features
  (see all):
  - Daughtercard selectable A/D converters
  - Up to 200Msamples/sec
  - High speed front panel parallel port output
  - Dual channel design
  - FIFO up to 256K sampleschannels
  - Channel data storage and burst
  - Data packing capability
  - 64-bit/66 MHz DMA initiator
  - External linear power supply port for D/C
  - Supports external sampling clock
  - Supports internal sampling oscillator
  - Analog resolution up to 90+dB SFDR [...]
Nuvoton Technology (1)
- WAU8812
  Mono audio Codec for VoIP-telephone, hands-free telephony markets; provides flexibility in performance and power consumption(+)
  Features
  (see all):38376.jpg
  - Robust, high-fidelity, 24-bit signal architecture
  - 93dB Digital-to-Analog Converter (DAC), Signal to Noise Ratio (SNR), and 91dB Analog-to-Digital Converter (ADC) SNR at audio sampling rates from 8 KHz to 48 KHz
  - Industry-leading 6uA standby current, which greatly reduces power consumption and extends battery life in hand-held applications
  - Integrated speaker driver, headset driver, and a configurable low-noise, microphone-biasing circuit
  - Two microphone inputs, a single auxiliary input, two dedicated analog outputs, and a digital filter block
  - Powerful development platform with simple graphical user interface development tools [...]