7.45.Xilinx Versal NET

Trusted Firmware-A implements the EL3 firmware layer for Xilinx Versal NET.The platform only uses the runtime part of TF-A as Xilinx Versal NET alreadyhas a BootROM (BL1) and PMC FW (BL2).

BL31 is TF-A.BL32 is an optional Secure Payload.BL33 is the non-secure world software (U-Boot, Linux etc).

To build:`bashmakeRESET_TO_BL31=1CROSS_COMPILE=aarch64-none-elf-PLAT=versal_netbl31`

To build bl32 TSP you have to rebuild bl31 too`bashmakeCROSS_COMPILE=aarch64-none-elf-PLAT=versal_netSPD=tspdRESET_TO_BL31=1bl31bl32`

To build TF-A for JTAG DCC console:`bashmakeRESET_TO_BL31=1CROSS_COMPILE=aarch64-none-elf-PLAT=versal_netVERSAL_NET_CONSOLE=dccbl31`

To build TF-A with SDEI_SUPPORT:`bashmakeRESET_TO_BL31=1CROSS_COMPILE=aarch64-none-elf-PLAT=versal_netSDEI_SUPPORT=1bl31`

7.45.1.Xilinx Versal NET platform specific build options

  • VERSAL_NET_ATF_MEM_BASE: Specifies the base address of the bl31 binary.

  • VERSAL_NET_ATF_MEM_SIZE: Specifies the size of the memory region of the bl31 binary.

  • VERSAL_NET_BL32_MEM_BASE: Specifies the base address of the bl32 binary.

  • VERSAL_NET_BL32_MEM_SIZE: Specifies the size of the memory region of the bl32 binary.

  • VERSAL_NET_CONSOLE: Select the console driver. Options:-pl011,pl011_0: ARM pl011 UART 0 (default)-pl011_1 : ARM pl011 UART 1-dcc : JTAG Debug Communication Channel(DCC)

  • TFA_NO_PM : Platform Management support.- 0 : Enable Platform Management (Default)- 1 : Disable Platform Management

  • CPU_PWRDWN_SGI: Select the SGI for triggering CPU power down request to

    secondary cores on receiving power down callback fromfirmware. Options:

    • 0 : SGI 0

    • 1 : SGI 1

    • 2 : SGI 2

    • 3 : SGI 3

    • 4 : SGI 4

    • 5 : SGI 5

    • 6 : SGI 6 (Default)

    • 7 : SGI 7

7.45.2.Reference DEN0028E SMC calling convention

7.45.3.Allocated subranges of Function Identifier to SIP services

SMC Function

Identifier Service type

0xC2000000-0xC200FFFF

Fast SMC64 SiP Service Calls as per SMCCC Section 6.1

7.45.4.IPI SMC call ranges

SMC Function Identifier

Service type

0xc2001000-0xc2001FFF

Fast SMC64 SiP Service call range used for AMD-Xilinx IPI

7.45.5.PM SMC call ranges for SiP SVC version 0.1

SMC Function Identifier

Service type

0xc2000000-0xc2000FFF

Fast SMC64 SiP Service call range used for AMD-Xilinx Platform Management

7.45.6.PM SMC call ranges for SiP SVC version 0.2

SMC Function Identifier

Service type

0xc2000FFF

Fast SMC64 SiP Service call used for pass-through of AMD-Xilinx PlatformManagement APIs to firmware

0xc2000A00-0xc2000AFF

Fast SMC64 SiP Service call range used for AMD-Xilinx Platform Managementspecific TF-A APIs

7.45.7.SMC function IDs for SiP Service queries

Service

Call UID

Revision

SiP Service

0x8200_FF01

0x8200_FF03

Call UID Query – Returns a unique identifier of the service provider.

Revision Query – Returns revision details of the service implementor.