Bumblebee has a lot of merchandise.

Happy Meal Toy

• Bumblebee (1985)

Non-poseable, non-transforming figurines of Bumblebee and three of his Mini-Vehicle chums (Cliffjumper,Gears, andBrawn) comprised the very first line of TransformersHappy Meal toys, but alas, the figures did not see a full release, and were only test-marketed in St. Louis, Missouri. The two-tone figures were available in a variety of colour variations, with at least six different combinations for each of the four characters: Bumblebee is known to have been available in blue and red, red and black, green and black, blue and black, black and yellow, and black and red... yet not his traditional yellow and black!

• More information on Happy Meal Bumblebee at the TF Artifacts List

Transformers Milk Caramel

• Bumble (1985)

A soft rubber figurine—known in Japan as akeshigomu— of Bumblebee was released as part of the first wave ofKabaya's earliestcandy toy line,Transformers Milk Caramel. Based more on his toy than his animation model, Bumblebee came packaged with chocolate-covered caramel candies, and was available in various colours, including white, blue, sky blue, yellow, green, and orange.

Transformers Choco

• Bumble (1985)

A small solid-color, transforming snap-together model kit of Bumblebee was released as part of Kabaya'sTransformers Choco line of candy toys.

Estrela

• Jogo dos Transformers (1985)

A tiny generic yellow car representing "Volks" (Bumblebee per his original toy name in Brazil) was included as a pawn inEstrela'sJogo dos Transformers board game. He is not directly named, simply being called the "carrinho amarelo" (little yellow car) in the game's instructions, but his identity is revealed as a pair of cards featuring art of his original toy in vehicle mode are also included. He comes with a small sticker that's placed on the bottom of the car representing his robot mode, thus allowing him to roughly "transform" by being placed vertically - a little bit like whatRobot Powered Machines would do about a pair of decades later.

This same car was recolored to representCamaro (AKA Windcharger),Carrera (AKA Cliffjumper), andSedan in the same board game.

Decoy

Fun fact, this was the last piece of Bumblebee merchandise we'd get up until the next decade and a half. Things sure changed...

• Cybertron Hero Collection 9 (multi-pack, 1986)
• Defeat Dinosaurer Strategy Game (board game, 1986)

Bumblebee was among the many characters rendered byTakara as part of their series of 1.5"keshigomu figurines. Like all the Autobots in the series, Bumblebee was molded in soft red rubber, and featured a number sculpted into his back that was the sum total of hisTech Specs, for use in the various games that could be played with the figurines. Bumblebee was available as part of a nine-piece box set of Autobot figures, as a playing piece in the Defeat Dinosauruer Strategy Game and later, in a peach coloration randomly packed as part of various other box sets.

• Bumblebee (1987)
  • Decoy number:26

The Bumblebee figurine was later brought over toHasbro markets as part of theDecoy promotion, largely identical to the Japanese release except for the fact that the number on his back was replaced with a simple "checklist" number (26, in Bumblebee's case). Like all Autobot Decoys, he was a randomly-chosen pack-in available with the cardedThrottlebots,Aerialbots,Protectobots andTechnobots.

• More information on Decoy Bumblebee at TFU.info

Super Collection Figure

"ACT NATURAL."

• Bumble (2001)
  • Act:3
  • Accessories: Stand

A 2-inch PVC of Bumblebee with his best human friendSpike was released in the third "Act" ofTakara'sSuper Collection Figure series. He carries the tiny little pistol he had in the opening of "More than Meets the Eye, Part 1". The figure was available in both full color and clear plastic versions, one of each available in a standard case of twelveblindpacked figures.

In two out of every ten cases, the color version of Bumblebee came packaged with the torso of the Act's collectible "build-a-figure"Fortress Maximus. This part could also be either full-color or clear-plastic, packed at an equal 1:1 ratio.

In one out of every ten cases (that didn't have a Fortress Maximus part), the clear version of Bumblebee was replaced with thebattle-damaged Optimus Prime "Secret Figure".

• More information on Super Collection Figure Bumble at TFU.info
• More information on clear Super Collection Figure Bumble at TFU.info

Heroes of Cybertron

Both of Spike's thumbs got stung by bees before the photo was taken.

• Autobot Espionage Team (2003)

The Bumblebee and Spike figurines were later sold in the fourth wave ofHasbro'sHeroes of Cybertron line, but since Hasbro didn't have thetrademark on Bumblebee's name at the time, the set was simply collectively named the "Autobot Espionage Team". This version of the duo was cast in clear-blue plastic then painted over, with Bumblebee's eyes and the back of his head unpainted to attempt alight-piping gimmick.

The pair were sold on a blister card, packaged with a character card and the right leg of the wave's collectibleFortress Maximus "build-a-figure".

• More information on Heroes of Cybertron Bumblebee at TFU.info

MyClone

Oh wow they managed to let the kid friendly character look like a fat, grumpy old man.

• Bumble (2003)
  • Japanese ID number:MTF010
  • Accessories: Yellow display stand

• Known designers:Kazutami Abiko (TakaraTomy)

Released in the second wave of theMyClone line of Transformers PVC figures, thissuper deformed Bumblebee comes with a hexagonal yellow display stand, which can link up with the identical stands included with other MyClone figures. His modular design allows his parts to be mixed and matched with those of any other MyClone figure.

Q-Robo Collection

• Bumble (2003)

A super-deformed PVC of Bumblebee was released as part of theQ-Robo Collection Figure. Like all the figures in the series, it was sold blindpacked in a plastic capsule, featured articulation in the neck and shoulders, and was also available in a translucent red color scheme.

• More information on the Q-Robo Collection at Autobase Aichi

Generation 1 Figure-Collection

• Bumble (2003)
  • Japanese ID number:C-4
  • Accessories: Display base

At only one inch in height, this Bumblebee "bottlecap" figurine (so named because its display base is the size of a bottlecap) was one of fourteen blindpacked figures available in Kabaya's TransformersGeneration 1 Figure-Collection. The figure was rendered in a "retro" black and white color scheme, and came with a leaflet, personalized with cartoon screen captures.

• More information on the Generation 1 collection at Autobase Aichi

History Collection

• Bumble (2004)
  • Accessories: Display base

Takara produced this PVC figurine of Bumblebee as part of theirHistory Collection set. Despite its diminutive size, this two-piece full-color figure features articulated shoulders.

• More information on the History Collection at TFKenkon.com

Hard Hero

• Bumblebee (mini-statue, 2004)

Standing at seven inches tall,Hard Hero's Bumblebee cold cast porcelain mini-statue was limited to 1500 pieces and could link up with the company's previousOptimus Prime statue to form a small diorama. Notionally, he was supposed to be the "first in the Minibot series", though no more Minibot statues were produced.

• Bumblebee (metallic chrome exclusive, 2004)

A metallic golden chrome version of Hard Hero's Bumblebee statue, in homage to the original toy's Generation 2 chrome redeco, was offered as an exclusive by Coalition Comics in December 2004, limited to only 250 pieces.

Gummy Candy

He's Bumblelicious!

• Transformers Gummy Candy (2006)

Largegummy candies resembling hisClassics toy packaged in a blister bubble.

Titanium Series

22 years and five Robot Points later, he finally gets a gun. Revenge time!

• Bumblebee (Robot Master, 2006)
  • Accessories: Gun, display stand

Titanium Series Bumblebee is a small, 3-inch mostly-die-cast-metal statue of the little guy in a design that's surprisingly close to the original toy, with two wheels on each arm, a plate behind his head and sculpted details on his legs that are also based on the original toy. The only part where the cartoon model is given a preference is the head, including the face.

Titanium Bumblebee has joints at the waist, neck and shoulders, plus a removable pistol. He even comes with a little Autobot-sigil display base.

This sculpt would've been used to makeCliffjumper, but theTitanium line was canceled before that figure could be released.

• More information on Titanium Bumblebee at TFU.info

"Umm...He did it!"
"What?"

• Optimus Prime & Bumblebee (2-pack, 2007)
  • Accessories: Gun, display stand

A Toys 'R' Usexclusive two-pack, this set features "Supermetal Finish" (read: shiny) versions of the "Robot Master"Titaniums Optimus Prime and Bumblebee.

Palisades

• Bumblebee (mini-statue, 2006)

Initially intended to be an exclusive forBotCon 2005,Palisades Toys' 4" Bumblebee mini-statue fell victim to a scheduling conflict and was instead released by NonStop Toys in 2006, with leftover stock also being allocated to Diamond Previews in some countries. This stock tended to have a cracked crotch, a common defect with this piece. One of the last four statues to come out of the Palisades Transformers range, Bumblebee was limited to 1000 pieces.

Diamond Select

• Bumblebee (statue, 2007)

This six-inch tall mini-bust of Bumblebee was sculpted byArt Asylum and limited to 1000 pieces.

• Bumblebee Roto-Bank (money bank, 2009)

Art Asylum also produced a Bumblebee money bank, equipped with poseable, rotating arms and head.

Robot Heroes

I wiw punch Soundwave into obwivion.

• Bumblebee & Soundwave (Two-pack, 2007)

• Known designers:Bill Rawley (Hasbro),Marcelo Matere (concept artist)

Robot Heroes Bumblebee is another piece of absolute adorableness. A soft-plastic figurine that combines the cartoon and toy elements of the original Bumblebee with a "super-deformed" style, he is jointed at the neck and shoulders. He came in a two-pack withSoundwave.

This mold was also used to makeRobot HeroesCliffjumper, of course.

• More information on Robot Heroes Bumblebee at TFU.info

• Bumblebee (Single-pack, 2008)

In some countries outside of North America, Bumblebee was released individually in a blindpack with no notable changes.

Transformers (2007)

• Slumblebee (2007)

Slumblebee is, as his name suggests, a plush Bumblebee toy based on his originalGeneration 1 form. Obviously he has no problems with articulation and passes the drop test with flying colors. You can transform him into his car mode (which is totallynot a Beetle, as far as Volkswagen can prove) by turning him inside out. Truly he is a new zenith of cuteness.

• More information on Slumblebee at TFU.info

3D Battle-Card Game

• Classic Bumblebee (2007)

A 22-point character in the3D Battle-Card Game's "Energon Wars" expansion, "Classic" Bumblebee "transforms" into a yellow sports coupe, based on hisClassics design. He uses the same parts layout asSide Swipe andBlackjack.

Sota Toys

• Transformers Chess Set (2007)

Eight identical Bumblebee pieces were to be the Autobot-side Pawns on achess set based on Generation 1, but the set apparently never saw release.

Proceed on your way to oblivion. This item has been canceled, with no current plans for release.

Boss Coffee

• Bumble (2008)

A non-transforming PVC figure of Bumblebee was released as part of a promotion byBoss Coffee. The small figure was randomly included with single cans of the company's "Rainbow Mountain Blend" coffee, contained in a plastic capsule affixed to the top of can which then became a display base for the figurine once removed. Bumblebee features articulation at the shoulders and waist, and came with a small catalog leaflet that could be folded up and attached to the lid/base to form a diorama background for added display value.

Attacktix

Well, if people are gonna keep drawing him carrying gigantic guns....

• Bumblebee (Booster, 200?)
  • Attacktix ID number:TF06

Part of the second-seriesTransformersAttacktix Boosters, Bumblebee is a "Rare" 10-point "Specialist" that fires a standard missile. His Special Power, "Infiltrate" allows Bumblebee, after being defeated and turning up white, to be placed anywhere on the opponents starting line. He also has an always-active power that lets him take a free turn if he defeats another "Specialist"-ranked piece with a higher point value than his own. Holy schneikies, he's amonster on the board.

Game over. This Attacktix item has been canceled, with no current plans for release.

Universe (2008)

Electric charger not included!

• Bumblebee Super Soaker (2009)

The BumblebeeSuper Soaker is a yellow and black redeco of Hasbro's earlier "Sneak Attack 4-Way" water gun. The gun has several nozzle settings that allow it to fire a stream or fan of water straight forward, or streams in four other directions to surprise people and "soak 'em sideways".

Mighty Muggs

Tubby lil' muggy all stuffed withfluff energon.

• Bumblebee (2009)

Mighty Muggs Bumblebee is asuper-deformed, non-transformable PVC figure with swiveling arms and head. His mold is different from the standard template used by mostTransformers Muggs, as it is extra short and has Bumblebee's trademark "horns". On the other hand, he doesn't come with any weapons.

Smug little bug.

• Bumblebee (2018)
  • ID number:03

Heavily influenced by hisevergreen design, this Bumblebee Mugg is part of the line's relaunch in 2018. This new mold features sculpted wings, and a unique helmet that changes Bee's expression when pressed. He has three different faces: smug, surprised, and silly.

Transformers Wacky Wobblers

• Bumblebee (2009)

This Bumblebeebobblehead is part of the popularWacky Wobblers line produced byFunko. Aside from the standard-issue big wobbling head, he also features arms that swivel at the shoulders. Bumblebee is affixed to a base with his name on it.

Transformers x Mimobot

• Bumblebee Mimobot (Mimoco, 2012)

Produced byMimoco as part of their multi-brand line of designer USB "Mimobot" flash drives, this Bumblebee memory stick comes in 2GB, 4GB, 8GB and 16GB sizes, and comes pre-loaded with "digital editions of classic comics, videos, and scripts", as well as a suite of screensavers, avatars, and more standard to all Mimobots.

The Loyal Subjects

• Bumblebee (2013)

Collect them all! This character article is astub and is missing information on theirtoys & merchandise. You can helpTransformers Wiki byexpanding it.

• Cybertron Bumblebee (2013)

Collect them all! This character article is astub and is missing information on theirtoys & merchandise. You can helpTransformers Wiki byexpanding it.

Thrilling 30

• Bumblebee (Collectible Figurine, 2014)
  • Series / Number:2 / #16
  • Accessories: Collector's base

A super-deformed Bumblebee was released among the blindpackedThrilling 30 Collectible Figurines byGoldie Marketing. He comes with a base to help him stand, a collector's card that doubles as a puzzle piece, and a checklist.

• Collectible Figurines (5-pack, 2014)
  • Series:2
  • Accessories: 5 collector's bases

The same Bumblebee figurine was also available in a 5-pack alongsideShockwave,Ultra Magnus,Grimlock andRodimus.

Tiny Titans

• Bumblebee (Tiny Titans, 2015)
  • Series:2
  • Number:11/12

Part of the second assortment ofTiny Titansblindpacks, this version of Bumblebee is a very small, soft-plastic figure of him in robot mode... cast in gray plastic with copious amounts of golden-yellow paint on him, more than most Tiny Titans get.

He includes a collectible card that renders him in the2015Robots in Disguise styling. The card includes a scan-badge for theRobots in Disguise mobile game, which unlocks a random amount of Energon "currency" and a randomized bonus power-up item.

This wave saw fairly minimal release at "big box" retailers, but unlike other waves, wasnot picked up by drug stores and the like later, making them particularly hard to find.

Hikari Mark Sofubi

Drawing from a number of franchises including Star Wars, Marvel and Godzilla, Funko released a line of 6.6 inch/17 centimetre tall deformed soft vinyl figures with limited articulation. Hikari, meaning ‘light’, came in a variety of colors and included a hand-numbered card of authenticity. Individual pieces ranged from 500 to 5000, depending on the character and variation. Eight versions of Bumblebee were released in 2014:

• Battle Ready Bumblebee (2014)

A yellow distressed rendering of Bumblebee in the Sunbow-style, limited to 1000.

• Clear Glitter Bumblebee (2014)

A yellow and black translucent rendering of Bumblebee in the Sunbow-style, limited to 3000.

• Dangerous Bumblebee (2014)

A black with grey streaks rendering of Bumblebee in the Sunbow-style, limited to 600.

• Distressed Bumblebee (2014)

A lighter yellow distressed rendering of Bumblebee in the Sunbow-style, limited to 1000.

• Grey Skull Bumblebee (2014)

A black and white rendering of Bumblebee in the Sunbow-style, limited to 1000.

• Ice Bumblebee (2014)

A blue and white two-tone translucent rendering of Bumblebee in the Sunbow-style, limited to 1000.

• Metallic Bumblebee (2014)

A metallic yellow and black rendering of Bumblebee in the Sunbow-style, limited to 1000.

• 24K Gold Bumblebee (2014)

An all-gold rendering of Bumblebee in the Sunbow-style, limited to 600.

Mecha Nations

• Bumblebee (2015)
  • ID Number:MN07
  • Accessories: Alternate hands, gun, battle-damaged armor (left arm, chest, right foot, face).

Created byKids Logic, thissuper deformed Bumblebee, with G1 "Beetle"-style appearance, stands 6" tall and is articulated, featuring a shiny metallic color scheme, replacement hands, LED light up eyes, weapon and Autobot insignias on his chest. He also includes alternate parts for his chest, right foot and a mangled left arm for thatmovie-inspired battle-damaged look. Bumblebee's deco, with more black than traditionally found on G1 Bumblebee, and included weapon also appear to draw from hislive-action counterpart.

Metal Earth

• Bumblebee (2015)
  • ID number:MMS301

Metal Earth Bumblebee is a DIY 3D Metal Model kit. The kit's difficulty rating is given as "expert".

• Gold Bumblebee (2015?)
  • ID number:MMS301G

Metal Earth Gold Bumblebee is a redeco of the kit above. He most likely represents Goldbug, though he is not named as such.

• Bumblebee (Legends, 2019)
  • ID number:MEM052

Metal Earth Legends Bumblebee is a DIY 3D steel model kit in the shape of a super deformed version of the evergreen Bumblebee design. The kit's difficulty rating is given as "moderate".

Block Wars

• Bumblebee (2016)
  • Number:2

Part ofKabaya'sTransformers Block Wars candy toy line, this Bumblebee kit is based on hisCyber Series Commander toy. Molded entirely in yellow plastic with detailing from stickers, he transforms into a super car when finished and is armed with a large sword with interchangeable handles. He can also be taken apart and combined withBlock WarsOptimus Prime,Megatron andStarscream in various configurations, the ones involving Bumblebee shown on the packaging being:

• Giving Bumblebee Megatron's arms and Starscream's wings and arming him with Optimus Prime's spear.
• Attaching Starscream's wings and Megatron's cannon to Bumblebee's vehicle mode, making him a flying death car.
• Having Starscream wield Bumblebee's sword and use his car roof as a shield.
• Combining all four into an unnamed combiner, with Bumblebee forming the arms.

Transformers Figure Collection

• Bumble (01–2016)

Standing 42mm tall,Transformers Figure Collection Bumble is a non-poseable soft-rubber figure greatly based on aDecoy figure.

My Busy Books

• Transformers: My Busy Book (2017)

Available with the10-page board book and a box filled with 12 figurines & a playmat depicting a destructed city & Cybertron, this Bumblebee is a pair of small, PVC non-transforming figurines consists of his robot mode (in his evergreen design) and his yellow car alternate mode that is inspired by hislive-action film counterpart's Camaro Concept vehicle. Like most of the land-based vehicle figurines, his wheels do not roll.

In terms of quality control, the figurines' paint applications can be...well, awee bit but not almost entirely shoddy (notably the wheels, as seen in the photo on the right). If you're a collector who prefers to display them, you should resign yourself from buying it or try tocustomize the figures with better paint applications if you have the skills.

Kidrobot

Enamel Pin Series

• Bumblebee (November 3,2017)

• Rarity: 2 in 20

Released byKidrobot in their Enamel Pin Series, this is a flat, enamel pin badge of Bumblebee inspired by the art ofTom Scioli'sTransformers vs. G.I. Joe, albeit withcutesy proportions. The pin series wasblindboxed, with some pins being rarer than others.

Vinyl Mini Series

• Bumblebee (November 14,2017)

• Rarity: 3 in 48

The same character design was reused for the Vinyl Mini Series, with Bumblebee receiving a three-inch tall, blindboxed figurine retaining the vibrant colours and exaggerated proportions. He featured articulation in each shoulder.

Vinyl Keychain Series

• Bumblebee (December 1,2017)

• Rarity: 3 in 24

Bumblebee was also released as part of the once again blindboxed Vinyl Keychain Series, now standing at about one to two inches. He included a keychain molded into his head and, due to his small scale, did not feature any articulation.

Hauck

In case a VW Beetle was too big for you.

• Bumblebee Go Kart (2017)

Manufactured byHauck toys, the Bumblebee go-kart is a small, pedal-operated vehicle for kids aged 4-8 years old. Cast in the image of Bumblebee (even featuring his head sculpted on the front), the kart features an adjustable seat as well as a brake.

Fidget Its

Thecube was merely a vessel; its power, its knowledge—can never be destroyed.

• Bumblebee (2017)

Arriving a little late to the fidget toy craze,Fidget Its Bumblebee is a cube-shaped Bumblebee with rubber horns and (non-poseable) feet. He has five features to fidget with: button eyes, a larger and clickier button, a slidable "arm", a clicky dial, and a pressable rolling metal ball on his back.

Bouncing Ball Heads

• Bumblebee (2017)

"Bouncing Ball Head" Bumblebee is a small, super deformed figurine with a removable head that doubles as a bouncy ball. An Autobot logo is tampographed on the back of his head and his name is written under his feet.

He is (apparently) available in both gacha-style machines and in an 8-pack with the whole collection, and comes inside a spherical capsule with a unique yellow color.

Despite clearly representing Generation 1 characters, the collection is advertised as a 2015Robots in Disguise product.

Playskool Friends

• Transformers Collector Pack (Canceled)

Intended to be released as part of the 7-pack for the Playskool Friends lineup, this Bumblebee is a very adorable non-transforming figurine. He comes packed with Optimus Prime, Arcee, and 4 Rescue Bots: Heatwave, Chase, Boulder and Blades.

Given the inclusion of the four Rescue Bots, it wasprobably unclear if this Bumblebee is mean to represent hisGeneration 1 counterpart or hisAligned counterpart.

Proceed on your way to oblivion. This item has been canceled, with no current plans for release.

Uglydolls

• Ice-Bat as Bumblebee (2018)

A collaboration withUglydolls for the 2018San Diego Comic-Con, the character Ice-Bat is dressed as Bumblebee. He is a limited run exclusive plush, along with Ox asOptimus Prime.

Keshi Surprise

• Autobots (2018)

TheKeshi Surprise series bySuper7 consisted of 1.75" soft rubber figures in a style deliberately resembling the 1980sDecoys. Theseblind-packed figures were sold individually or in cases depicting only their faction. Bumblebee was available in red, yellow, blue, and purple, and included a foil trading card / sticker.

McDonald's

• Bumblebee (Happy Meal Toy, 2018)

Released as part of theMcDonald's June 2018 Happy Meal Toys along withMy Little Pony, McDonald's Bumblebee is asuper deformed, non-poseable toy, except at the right arm, which is a little missile launcher. It's pretty big. That's it.

The toy was available in South Korea, Italy, Russia, and Malaysia. This toy was rereleased in the US asBumblebee for theBumblebee promotion.

• Bumblebee Racer (Happy Meal Toy, 2018)

Part of the same Happy Meal collection as the toy above, this toy represents Bumblebee in his car mode with a pull-back motor. It was also rereleased asBumblebee Racer for theBumblebee promotion.

Transformers Trading Card Game

• Bumblebee, Brave Warrior (2018)
  • Wave 1S: Starter Set
  • Rarity:RT
  • Card Number: T01/T04
  • Stars:6

Bumblebee, Brave Warrior is one of four double-sided character cards available in theTransformers Trading Card Game Starter Set.

The artwork for the card is reused from theTransformers Legends mobile game, and is based on theLegacy of Bumblebee redeco of theClassics Bumblebee toy.

• Bumblebee, Courageous Scout (2018)
  • Wave 1
  • Rarity:CT
  • Card Number: T08/T40
  • Stars:9

Bumblebee, Courageous Scout is one of forty double-sided character cards available in Wave 1 of theTransformers Trading Card Game.

The artwork for the card reuses different artwork from theTransformers Legends mobile game, and is based on theLegacy of Bumblebee redeco of theClassics Bumblebee toy.

• Bumblebee, Legendary Warrior (2018)
  • Wave 1
  • Rarity:SRT
  • Card Number: T09/T40
  • Stars:10

Bumblebee, Legendary Warrior is one of forty double-sided character cards available in Wave 1 of theTransformers Trading Card Game.

The artwork for the card reuses more artwork from theTransformers Legends mobile game, and is based on theLegacy of Bumblebee redeco of theClassics Bumblebee toy.

• Bumblebee, Trusted Lieutenant (2019)
  • Wave 2: Rise of the Combiners
  • Rarity:CT
  • Card Number:T14/T46
  • Stars:10

Bumblebee, Trusted Lieutenant is one of forty-six character cards released in Wave 2 of theTransformers Trading Card Game, Rise of the Combiners.

The artwork for the card features another set of reused artwork from theTransformers Legends mobile game, and is once again based on theLegacy of Bumblebee redeco of theClassics Bumblebee toy.

• Bumblebee, Least Likely, Most Dangerous (2019)
  • Wave 2S: Bumblebee vs. Megatron Starter Set
  • Rarity:RT
  • Card Number:T01/T04
  • Stars:7

Bumblebee, Least Likely, Most Dangerous was released as part of theTransformers Trading Card Game's Bumblebee vs. Megatron Starter Set. The card was packaged alongsideMegatron, Cybertronian Tyrant,Starscream, Decepticon Lieutenant,Windblade, Defender of Truth, and a 40 card ready-to-play deck of Battle Cards.

The line-art for the card was done byDan Khanna, and like the other Bumblebee cards in the Transformers TCG is based on theLegacy of Bumblebee Classics Bumblebee toy.

• Bumblebee, Trusted Lieutenant (2019)
  • Wave 2P
  • Rarity:CT
  • Card Number:P5/2019
  • Stars:10

A reprint of Bumblebee, Trusted Lieutenant was made available as an in-store play promo card for the release of Wave 3: War for Cybertron: Siege I. The card is identical to the original release, printed with gold-foil on the Robot Mode side.

• Bumblebee, Legendary Warrior (2019)
  • Wave 1: Energon Edition
  • Rarity:SRT
  • Card Number:T01/T06
  • Stars:10

Released as part of the TCG's Wave 1: Energon Edition, this card is a reprint of Wave 1's Bumblebee, Legendary Warrior. Printed on semi-transparent plastic instead of a normal Character Card, this version features new art byKen Christiansen

Flame Toys

Furai Model

• Bumblebee (May 2019)
  • Number:04
  • Accessories: Gun, Heli-pack, Hammer

• Known designers:Akira Amemiya (concept artist)

Bumblebee is released as part of theFurai Model line of articulatedGunpla-based model kits fromFlame Toys. Bumblebee also comes with a gun, a heli-pack inspired by his Action Master toy, and a hammer based on his live-action film counterpart's weapon seen inThe Last Knight. Using parts made of hard ABS plastic and some polycaps, Bumblebee is approximately Deluxe-sized in height.

If one chooses, the kit can be panel-lined and touched-up with several panel-lining and paint markers (water/acrylic-based markers are recommended, as alcohol-based markers likeGundam Markers can potentially damage the ABS plastic). If one desires; the kit's pieces, aside from the translucent parts, can be fully coated with spray paints to recreate the finished sample seen in the stock photos.

Though not meant to be fully clipped together, Bumblebee's torso, feet, and wheel parts can be rearranged into a Volkswagen Beetle-like alt mode.^[1]

• Bumblebee (Red ver.) (2020 20??)

A red version of the Bumblebee figure was revealed in a Flame Toys product catalog, to be released in 2020. However, he has not been released yet, and was also not advertised as Cliffjumper, and simply appeared to be a red Bumblebee.

No promises. This item is not on a release schedule, but Hasbro, TakaraTomy, or any other of the companies are examining options for its availability.

ReAction

• Bumblebee (2020, 2024)
  • Accessories: Blaster pistol

Released in the first wave ofSuper7's line of multi-property 3.75-inch action figures,ReAction Bumblebee is a non-converting "retro-style" action figure with 5 points of articulation, based on his appearance in the original cartoon. He comes with a small blaster which can only be held in his right hand. He has holes on the bottom of his feet for mounting him on some manner of figure stand.

As with all releases in theReAction toyline, Bumblebee comes packaged in a small cardback that emulates the nostalgic packaging style ofKennerStar Wars action figures of the late 1970s and early '80s, the figure format the entire line is based around.

In late 2024, this figure was reissued with no obvious changes, now in ablindpacked box assortment.

• Gold Armor Bumblebee (2020)
  • Accessories: Blaster pistol

This is aTarget-exclusive redeco ofReAction Bumblebee, now inGeneration 2-inspired metallic gold and black. The gold parts of the card-art are printed with avery reflective metallic-gold, which often ends up looking black in photography if there's not direct light on it (as seen in the stock imagery at right).

This figure was something of apegwarmer, eventually getting clearanced out and going from cluttering Target pegs to clutteringeBay "ReAction" searches.

Jada Toys

Metalfigs

• Bumblebee (4" Die Cast Figure, 2020)
  • Accessories: Big blaster, small blaster

Released byJada Toys,Metalfigs Bumblebee is a 4 inches tall non-transforming super deformed die-cast figure with three points of articulation andlight-up eyes. His design blends elements from both his original toy and cartoon appearance.

He comes with two different blasters as accessories.

• Diorama Scene (2 3/4" Die Cast Figure 4-pack, 2020)
  • Accessories: Display backdrop

A static die-cast figurine of Bumblebee measuring approximately 2 3/4 inches tall is available as part of a "Diorama Scene" 4-pack alongsideOptimus Prime,Starscream andMegatron.

The packaging backdrop can be used as an additional display piece for the set.

• Optimus Prime / Bumblebee / Optimus Primal / Megatron (2 3/4" Die Cast Figure 4-pack, 2022)

This static Bumblebee figurine is directly designed after the 4" figure above, but measures half the size and lacks the accessories. He is available in a 4-pack alongsideOptimus Prime,Optimus Primal andMegatron.

• Bumblebee (2 3/4" Die Cast Figure, 2023)

The same super deformed Bumblebee from the 4-pack above is also available in individual packaging.

Nano Hollywood Rides

• Starscream / Volkswagen Beetle Bumblebee / Optimus Prime (1.65" Die Cast Vehicle 3-pack, 2020)

Nano Hollywood Rides Bumblebee is a small non-transforming die-cast licensed Volkswagen Beetle measuring approximately 1.65 inches long. He was released in a 3-pack alongsideStarscream andOptimus Prime. Unfortunately, he doesn't feature a sculpted robot mode underneath like most other Jada vehicles do.

Nano Metalfigs

• Transformers Series 1 18-pack (4 cm Die Cast Figure Multipack, 2022)

Nano Metalfigs Series 1 Bumblebee is an incredibly small die-cast figurine molded with his hands on his waist. He has a little base attached to his feet for balancing reasons.

He comes in an impressive multipack withseventeen other figurines. This mold was later redecoed as Series 2Cliffjumper.

• Transformers Series 2 18-pack (4 cm Die Cast Figure Multipack, 2022)

A secondNano Metalfigs Bumblebee was released in Series 2, this time a redeco of Series 1Cliffjumper who is doing a bit more of an action pose.

He comes inanother impressive multipack withseventeen other figurines.

• Transformers Series 3 18-pack (4 cm Die Cast Figure Multipack, 2023)

For thethirdNano Metalfigs multipack, Series 1 Bumblebee was re-released with no noticeable changes.

Hollywood Rides

• Bumblebee Volkswagen Beetle (Scale 1/32 Die Cast Vehicle, 2024)

Hollywood Rides Bumblebee is a 1/32 scaled non-transforming die-cast licensed Volkwagen Beetle with rubber tires and opening doors. He was released and found in retail without any prior announcement.

Figural Bag Clip

• Bumblebee (2020)

Released byMonogram, this 2.5" 3D foam bag clip takes the form of a chibi Bumblebee.

It was available only as part of amystery blind bag collection.

• Bumblebee (2021)

A non-articulated, non-transforming 3" figure of Bumblebee with an attached clip, also released by Monogram.

Unlike the previous year's release it was sold on a standard cardback.

D'elicce

• Transformers Easter egg (90g, 2020)

In 2020,Brazilian chocolate manufacturer Top Cau, under its kid-focused branch D'elicce, released aTransformers-themed 90gEaster egg that came inside a relatively large hard plastic handbag based on Bumblebee's evergreen head design.

• Transformers Easter egg (90g, 2021)

In 2021, D'elicce released anotherTransformers-themed Easter egg, this time including a popcorn bucket ofcutesy proportions based on either Optimus Prime or Bumblebee.

• Transformers Easter egg (90g, 2022)
  • Accessories: Egg holder/obstacle piece

D'elicce's 2022Transformers egg included a toy of an evergreen Bumblebee car with the robot mode head sticking out of the roof, creating the illusion that Bumblebee is driving himself.

The car is made of pure yellow plastic (except for the wheels which are black) and is completely hollow underneath due to the egg being stored inside of it in-packaging. It does come with a curved piece made of black plastic attached to its underside that helps to keep the egg in place, but it's not supposed to stay attached after removing the egg since it prevents the car from touching the ground with its own wheels. The piece can be loosely stuck inside the car for improvised storage, but it's clearly not designed to attach in any other way. Instead, the piece itself features a phrase (written in Portuguese) embossed on its inner side suggesting that it should be used as an "obstacle" for the car to play with. Hey, at least they tried to get creative with it. Meanwhile, an Autobot logo is embossed on the outer side of the piece.

The toy features no paint applications and instead comes with a sticker sheet with 16 stickers—including the car's front grille, headlights, windows and decorative stripes—and instructions on where to apply them. Attention must be paid while applying the stickers, however, as the instructions incorrectly show the headlights and the rear side windows being applied to the opposite side to the one they were actually intended. The transparent plastic used as packaging tries (and fails) to give the impression that the windows come pre-applied, but in reality only the robot's face actually comes as a pre-applied sticker.

You may have noticed they're not exactly striving for originality here.

• Transformers Easter egg (90g, 2023)

The 2023 version of D'elicce's Bumblebee is a big-headed robot mode figure made entirely of two pieces of yellow plastic. Opening the figure in half reveals a chocolate egg and a sticker sheet inside. As was the case with the previous release, only the face comes with a pre-applied sticker, while the stickers for the chest, arms and legs must be applied manually. The stickers for the arms feature noticeable movie-style Autobot insignias.

DidShockwave do this to you?

• Transformers Easter egg (90g, 2024)

Yet another Evergreen Bumblebee big head was released in 2024, this time in the form of a lunchbox or something. You can tell they're not even trying anymore.

Super Cyborg

• Bumblebee (2021)
  • Accessories: Blaster, torso plate

Super Cyborg Bumblebee is an 11-inch-tall non-transforming vinyl figure produced bySuper7. Its most significant feature is the ability to remove the entire front of the torso to reveal sculpted inner mechanical detailing.

• Bumblebee (Clear) (2021)
  • Accessories: Blaster, torso plate

Another version ofSuper Cyborg Bumblebee was available in mostly transparent plastic, with only some black and yellow on the inner torso parts to make the "x-ray" feature more distinct.

Minimates

• Bumblebee (Series 1, 2021)
  • Accessories: Pistol, alternate head, stand

Part of the first wave of TransformersMinimates fromDiamond Select, this Bumblebee is a 2-inch-tall figurine featuring metallic paint, 12-14 points of articulation, and accessories and body parts interchangeable with other Minimates. The set also includes an alternate head for Bumblebee styled after his Generation 1 toy. Due to their small size, all 4 figures in each series are sold in the same blister card.

• VHS Minimates Box Set (2022)

Minimates Bumblebee was rereleased as part of aSan Diego Comic-Con 2022 exclusive 4-pack, featuring more cartoon-accurate matte painted deco. The packaging for this set resembles aFamily Home Entertainment VHS tape. Only 2500 of this set were produced.

R.E.D. [Robot Enhanced Design]

Put me with your Marvel Legends and I'mperfectly scaled!

• Bumblebee (2021)
  • Accessories: blaster, 2 alternate hands, 2blast effects,Energon cube, chest plate

Released as part of the third wave ofTransformers R.E.D. toys, Bumblebee is a non-transforming 6-inch action figure akin to the ones from theMarvel Legends andStar Wars The Black Series lines. He features 26 points of articulation and is decoed in an attempt atshow-accuracy, with an extra smattering ofSiege-style battle damage. His robot mode is based onconcept art byKen Christiansen, which had earlier influenced Bumblebee's look in the2019 IDW ongoing comic and theWar for Cybertron Trilogy animated series.

Bumblebee's chest plate can be removed to reveal details meant to represent his "inner workings". He comes with two sets of hands: one pair of closed fists, and one pair of open hands for holding weaponry and accessories. Speaking of which, he also includes a small blaster accessory (though his product description claims he has two), along with a pair of fire blast effects to simulate weapons discharge. He also comes with an Energon cube.

As with allR.E.D. toys, Bumblebee was a Walmart exclusive in Canada and the United States, and was later made available onHasbro Pulse in limited quantities.

Pop!

• Bumblebee (2021)
  • ID number:23

Released as part of thePop! Retro Toys segment,Funko'sPop! Bumblebee is a super deformed vinyl figure based on his original Generation 1 toy, although with a more cartoon-accurate face and carrying a small blaster on his right hand.

• Bumblebee (2021)
  • ID number:28

Exclusive toTarget, this version of Bumblebee is instead based on hisClassics toy, complete with theWave Crusher attached to his back.

• Bumblebee (PocketPop! Keychain, 2021)

A smaller version of the G1-toyPop! Bumblebee with a keychain attached to his head.

• Bumblebee (DigitalPop!, 2022)
  • Rarity:
    • Monochrome:Common
    • Static:Common
    • Glowing:Uncommon
    • Chrome:Rare
    • Original:Epic

NFTs depicting Bumblebee in the Funko style. Interestingly, theArk seems to be mobile on Earth's surface, something which it never was while Bumblebee was conscious during theG1 cartoon the figure is likely based on.

• Freddy Funko as Bumblebee (2022)
  • ID number:50

Part of thePop! Digital segment, this regular-sized vinyl figure portraysFreddy Funko cosplaying as Bumblebee. The body of this figure is the same as the G1-toy version of Bumblebee, while the head has been modified to incorporate Freddy's face and a crown on its top. It could only be acquired by redeemingone of the three 1-of-1 NFTs featuring this figure.

• Bumblebee (Pop! Pin, 2022)
  • ID number:17
  • Accessories: Display stand

A metallic enamel pin based on Bumblebee'sClassics vinyl figure measuring 4-inches tall, approximately the same as a regular vinyl.

• Mr. Potato Head Bumblebee (Pop! Digital Retro Toys, 2022)
  • Rarity:Legendary
  • ID number:125

Similar in concept to otherMr. Potato Head toys, this vinyl figure is a representation of said character taking the appearance of Bumblebee, except it can't be taken apart piece by piece.

This figure is limited to 1550 units and can only be acquired redeeming an NFT representing this version of the character.

Zōteki

• Bumblebee (2021)
  • ID number:026

A collaboration betweenHasbro and statue/replica brandJazware,The Transformers was added as a part of theZōteki line alongside other iconic brands such asMarvel, to recreate some of the main "Generation 1" characters. The 26th figure of theZōteki line is Bumblebee.

Each statue of the line features a connection point for it to be connected to the others, in order to form a battle scene.

Eaglemoss

Cliffjumper would've honestly fit the role.

• Transformers Gen-1 Chess Set (2021)

In the plannedTransformers Chess Set byEaglemoss, a relatively large and very well-detailed statue of Bumblebee was slated to be one of the Pawn pieces on the Autobot side.

A Kickstarter campaign to raise the necessary funds for this project was launched but failed to meet its goal by September 24, 2021, and the whole thing was canceled.

Proceed on your way to oblivion. This item has been canceled, with no current plans for release.

Prime 1 Studio

Cutie1

• Bumblebee (2022)
  • ID Number:No:057
  • Accessories: Stand

Prime 1 Studio'sCutie1 Bumblebee is a lovable (if not somewhat scary looking) soft vinyl figure stylized as a button-eyed doll with chibi proportions.

• Bumblebee (Keychain, 2021)
  • Accessories: Stand, chain

Part of a marketing push following the announcement of the figure above, an acrylic keychain ofCutie1 Bumblebee was released, along with other products such as stickers, T-shirts, hand towels and totebags using its design. The keychain comes with a small stand so that you can display it when not carrying it around with your keys.

Acrylic keychain series

• Convoy & Bumble (October,2022)

Released as part of the first wave of ane-HOBBY exclusive series, this pair of keychains depicts character art and assets re-used fromOptimus Prime and Bumblebee'sMasterpiece releases, namelyMP-44 Convoy andMP-45 Bumble and Spike 2.0 respectively.

Authentics

• Bumblebee (2018)

Clip Bots Bumblebee is a smallsuper deformed plush that can be "transformed" into a little car by flipping it inside out. It features a plastic clip so it can dangle from whatever you clip it to.

• Bumblebee (2022)

Modeled after Bumblebee's evergreen design, thisroleplay toy mask was released along side anOptimus Prime version.

• Bumblebee Mask (2024)

Manufactured byPeachtree Playthings, this mask is a completely new mold based on Bumblebee's evergreen design, though some details such as the two black vertical stripes over his eyes are unpainted. It was found at discount stores such as Dollar Tree with no prior announcement. As with the previous mask, it was released along side anOptimus Prime version.

• Cybertron Battlers Bumblebee (2022)

Released in theCybertron Battlers subline ofAuthentics, this vinyl figure is a non-transforming, 5.5 inch rendition of Bumblebee in his evergreen design with limited points of articulation. He has a stinger weapon molded into his right forearm, complete with molded sparks.

He comes packaged either individually with a tag, or in twos in a box together withOptimus Prime andMegatron.

Dap me up, Prime!

• Pull-Back Racers Bumblebee (2023)

Released in thePull-Back Racers subline ofAuthentics, this toy is a non-transforming rendition of Bumblebee in a super-deformed rendition of his vehicle mode, albeit with his robot mode head and left arm sticking out of it. As the title suggests, this toy has a pull-back motor that will propel the toy forwards after being pulled back considerably enough.

Squeezelings

• Bumblebee (Series 1, 2022)

Squeezelings Bumblebee is asuper deformed, non-posable figure made of soft plastic and holding a blaster, released byForever Clever. He was released inblind bags and in boxed giftsets. One of these sets included a 'Blackout Color Mode' redeco.

• Blackout Color Mode Bumblebee (2022)

Ablack redeco of the previous Bumblebee figure, resembling the many Stealth Bumblebee redecos hismovie self has received over the years. It was exclusive to an 8-figure gift set, featuringOptimus Prime,Bumblebee,Starscream,Megatron, and Blackout Color Mode versions of the three other characters.

• Bumblebee (Series 2, 2023)

A figure of Bumblebee in soft plastic, like the above. Unlike the above, this one is not in super deformed style. He was released in a gift set alongsideOptimus Prime,Megatron andOptimus Primal, in blind bags, or on blister card individually.

Icon Heroes

• Optimus Prime X Bumblebee Retro Pin Set (2022)

A hard enamel pin based on Bumblebee's original G1 package art made by Icon Heroes. It comes carded with anOptimus Prime pin.

This item is currently scheduled for release, but is not yet available at mass retail.

Magic: The Gathering

Pairs well with the Equipment ArtifactHard Hat.

• Goldbug, Humanity's Ally / Goldbug, Scrappy Scout (2022)
  • ID number:011/015
  • Set code:BOT
  • Color identity:White/Blue
  • Casting cost:{1}{W}{U} (front),{W}{U} (back)
  • Artist:Andrew Griffith

"Goldbug, Humanity's Ally" is part of the 2022Magic: The GatheringUniverses BeyondTransformers card set, found in Set Booster and Collector Booster packs ofMagic'sThe Brothers' War set. It can be reversed to become "Goldbug, Scrappy Scout", representing Goldbug in vehicle mode.

A variant of this card was available solely in Collector Booster packs, depictingShattered Glass Goldbug.

XM Studios

Cute and kid-friendly...to the extreme!

• Bumblebee (2022)

XM Studios' statue of Bumblebee is 13" tall, made of hand-painted porcelain. Bumblebee has light-up eyes and two different head sculpts, one with his standard face and one with his battle mask. Bumblebee is accompanied by Spike, wearing an exo-suit. The set also includes a sculpted representation of Bumblebee's car mode that can be displayed next to the robot.

258 pieces were produced, with a suggested price of about $1,200 US.

Threezero

• Bumblebee (MDLX, 2022)
  • Known designers: Kelvin Sau
  • Accessories: one "Laser Blaster", one alternate masked head, three pairs of hands (relaxed, closed, posed)

Threezero's debut figure for the MDLX line, this version of Bumblebee is an original design taking inspiration from the original cartoon but with the aesthetics in the vein of the live-action movies. Bumblebee is a smaller scaled non-transforming action figure in the vein of contemporary collector-oriented lines like Figma and S.H. Figuarts. Like those lines, the figure is extremely well-articulated and detailed, features interchangeable hands and heads, with the alternate visored face specifically resembling his G1 toy. The three pairs of hands he comes with are relaxed splayed-open hands, closed fists, and posed hands meant to hold his included Laser Blaster (which in turn is based on the pistol used in the cartoon). His back tire can also be removed.

Bumblebee was redecoed into his Gold Edition release below and retooled with a new head intoCliffjumper.

• More information on MDLX Bumblebee at Threezero

• Bumblebee (Gold Edition) (MDLX, 2022)
  • Known designers: Kelvin Sau
  • Accessories: one "Laser Blaster", one alternate masked head, three pairs of hands (relaxed, closed, posed)

A golden redeco of the above Bumblebee release that calls to mind both hisG2 toy andGoldbug, this figure was limited to 2000 units worldwide.

• More information on MDLX Bumblebee (Gold Edition) at Threezero

• Bumblebee (Vintage Animation Edition) (MDLX, 2024)
  • Known designers: Kelvin Sau
  • Accessories: one "Laser Blaster", one alternate masked head, three pairs of hands (relaxed, closed, posed)

Another redeco of Bumblebee, this time in brighter colors to mimic the cel-shading of the original cartoon. All previous accessories and functionality carry over from before.

Vintage Animation Edition Bumblebee,Megatron andOptimus Prime were revealed in apress release from Hasbro about the brand's 40th anniversary marketing bonanza, with pictures of the trio being unveiled a few weeks after. Threezero also announced these figures would make a limited debut at TFCon LA the following month, with a wide release sometime later in the spring.

• More information on MDLX Bumblebee (Vintage Animation Edition) at Threezero

This item is currently scheduled for release, but is not yet available at mass retail.

Transformers × Mini World

• Bumblebee (2023)
  • Accessories: Transforming base, gun, sword, machine part, crane arm, 2 connectors

Transformers × Mini World Bumblebee is a tie-in to the popularChinese gameMini World. It comes with a display base which can fold up into a cube-shaped representation of a hatchback, complete with rolling wheels. The figure can transform into a storage mode to store fully inside the cube, or you can remove his head and install the entire cube on his neck. The unfurled base mode has some machinery inside, as well as a weapons rack to store the included gun and sword accessories.

Each set includesBuild a Figure-like machinery components which can be combined with parts from other sets to make new structures.

This figure was exclusively available at TMall, a subsidiary of Alibaba. This figure was released both individually and as part of a giftset with the rest of the "Mini World" Transformers.

Mochibots Transformers Plush

They don't allow you to have Bees in here.

• Mochibots "Transformers" Plush Bumble (2023)

Created in the line of soft, cuddly little 'bots,Mochibots Bumble is a 5.5 Inch tall plushie of everyone's favorite yellow Autobot, applying a stylized "Fumo" look for Bumblebee's Sunbow Cartoon Animation model, with rounded shapes and chubbier proportions making him an adorable stuffed adaptation of his 80's design. Almost every detail is sewn-on, allowing for depth and texture on different parts of the plush. On the back, Bumble sports his spare tire, represented by a yellow ball of plush. In addition, his eyes and window detailing are all made with a special sparkly fabric, which allows for those details to slightly shimmer under light.

Bumble was released as part of the first wave of Mochibots plush toys, alongside Optimus Prime, Cliff, and Shattered Glass Optimus Prime in 2023. This line was exclusive to China and Japan, with almost all of them being locked to Asia viaamiami's storefront.

Kotobukiya Bishoujo Series

Happy slapping hoodies with Asbos and ringtones.

• Bishoujo Series Transformers Bumble/Bumblebee (August 2023)
  • Known designers:Shunya Yamashita (artist)

KotobukiyaBishoujo Series Bumble/Bumblebee reimagines the Autobot scout as abubbly anime girl (formally termed as aBishōjo). The Bishoujo Bumblebee statue sees various elements of the classic G1 robot design translated into fashion and style choices, such as the hood adorned with the G1 horns, the car roof and window chest as a light blue undershirt visible underneath the sleeveless hoodie, and the hood of the VW Beetle altmode as shoes.

This statue was later recolored to createBishoujo SeriesCliffjumper.

Fools Paradise

• Bumblebee (2023)
  • Accessories: Football

Part of a collaboration between Hasbro andHong Kong-based online store ZCWO, Bumblebee joins the "League of Steel" subline ofFools Paradise's LOWFOOL range, rendered as a hulking American football player alongside similar vinyl statues ofEvangelions andGundams. He is depicted as a human man wearing heavily Bumblebee-inspired body armour and sports equipment, including a colour coordinated football, and is designed with the characteristic LOWFOOL facial features of a strong brow, squinting eyes, and moustache.

Preorders for Bumblebee opened in July 2023, with a projected release date of November.

Hot Wheels

• Bumblebee (HW Screen Time, 2024)

• Mainline ID number:186/250
• HW Screen Time ID number:9/10

Made in collaboration withMattel,Hot Wheels Bumblebee is a non-transforming and fully licensed Volkswagen Beetle at 1/64 scale, slightly retooled from the existing "VW Bug" Hot Wheels casting. Bumblebee lacks a robot mode, though his face is sculpted into the bottom of the car undercarriage. The toy can be hauled in the later releasedHot WheelsTrack Fleet Ultra Magnus trailer.

There are two versions of this release. The original one is in a traditional yellow color with a red Autobot insignia on the left side of the hood. It was then followed by a variant painted gold, possibly in reference to Goldbug, with a black insignia instead.

As is the case with mostHot Wheels releases, the packaging depicts a realistic render of the miniature vehicle, which is colored accordingly to the variant of the toy packaged with it.

• Custom Volkswagen Beetle (Transformers, 2024)

• Transformers ID number:1/5

A redeco of the Custom Volkswagen Beetle casting to resemble the color scheme and insignia of Bumblebee despite the casting being a much more chopped down hot rod version of the Beetle. The packaging makes use of stock images of evergreen Optimus Prime and Bumblebee.

• Bumblebee (Skate, 2024)

• Accessories: Finger sneakers

Part of theHot Wheels Skate subset, this is a Bumblebee-themed finger skateboard that comes with a pair of yellow finger sneakers. The shape and packaging use Dreamwave-era artwork of Bumblebee.

Yolopark

AMK Mini

• Bumblebee (2024)

• Accessories: 2 additional pairs of hands (Splayed, Pointing), Autobot Pistol

Released as part of Yolopark'sAMK (Advanced Model Kit) Mini Series, this Bumblebee kit can only be completed by snapping the pre-painted pieces together. Aside from the identical hand parts used for most of theAMK Minis, Bumblebee also comes with his usual signature Autobot pistol.

This mold was used to make the unofficial BotCon 2025 exclusive "The Sound of Science"Glyph and the single-packCliffjumper.

• Bumblebee (IDW) (2025)

The second wave of theAMK Minis features a new mold of the Autobot Scout in hisEvergreen design used inTransformers: Unicron.

This item is currently scheduled for release, but is not yet available at mass retail. June 2025 release

AMK

• Bumblebee (2025)

• Accessories: 1 additional pair of hands, Autobot pistol, alternate mouthplate

TheAdvanced Model Kit Series Bumblebee is a slightly larger version of the character, and unlike the previously-released AMK Pro kits, he is purely made out of ABS plastic with no die-cast. In addition to his extra pair of hands and an Autobot Pistol, Bumblebee comes with an additional smiling mouthplate.

This item is currently scheduled for release, but is not yet available at mass retail. June 2025 release

BMK

• Bumblebee (2025)

• Accessories: Autobot pistol

TheBMK (Which stands for "Beginner Model Kit") Bumblebee is a larger version of theAMK Mini, with the design being based on theAMK/Pro release. As with otherBMKs, Bumblebee features a similarly basic articulation, though the knees have been replaced with a rotating joint.

This item is currently scheduled for release, but is not yet available at mass retail. June 2025 release

Blokees

Galaxy Version

• Bumblebee (2024)

• Series:Galaxy Version 03 - The Autobot Run
• Accessories: Spare balljoint piece, figure stand, 2 open hands, left thumbs up hand, Autobot pistol, blast effect, communications monitor,Energon cube, holdable Autobot/Decepticon insignias

Released in the third wave ofGalaxy Version line of blind boxes,Blokees Bumblebee is a roughly 4-inches tall, highly-articulated, and non-transforming snap-on model kit of the Autobot Scout. He is built on a "Standard Body" skeleton shared with other Blokees figures in the line, but with different body pieces to make them distinct. As advertised in the box, Bumblebee has a pull rate of 1 in every 9 boxes, or three times across four cases. Unlike the previous line's Cliffjumper, Bumblebee features a color-coded head construction instead of a 2-piece head with pre-painted eyes.

Bumblebee comes with a pair of closed and open hands and a left hand molded in a thumbs-up exclusive to this figure. He also comes with his own Autobot pistol and its respective blast effect, an Energon Cube, and a communications monitor that either of the closed hands can wield. However, it's recommended plugging the piece onto one of his forearms (the arms must be swapped and the forearms rotated to show its peghole.). Bumblebee also comes with a stand with four studs on top, which can be plugged into and connected to similar stands.

Defender

• Bumblebee (2024)

• Series:Defender Version 01 - Shattered Alliance
• Accessories: Pistol

ThisDefender Version kit of Bumblebee (decoed in his Goldbug-inspired colors) is a 2.2-inch (5.5cm) figure, a few inches smaller than theGalaxy Version kits, but still articulated. Unlike hisGalaxy Version kit, Bumblebee only comes with the generic pistol used by other Defender kits.

As with all robot mode kits from this line, Bumblebee features color-coded eye parts, which double as the neck's socket joint. This mold was also used to make the chaseSG-Bumblebee kit.

• Bumblebee (2025)

• Series:Defender Version 02 - The Overthrow
• Accessories: Pistol

One of the four headline figures for the secondGalaxy Version Defender line, this Bumblebee is a redeco of the previous kit, now in his regular, classic coloration.

• Bumblebee (Special Armor Type) (2025)

• Series:Defender Version 02 - The Overthrow
• Accessories: Sword, Shield

The "Special Armor Type" version of the Bumblebee is an alternate version of the original kit, decked out in metallic paint, and comes with additional armaments such as the sword and an energy shield. Unlike the chase SG-Bumblebee variant, this kit has an even slimmer pull rate of1 in every 144 boxes, or once per twelve cases.

Shining Version

Build-Your-Own Bumblebee Action Figure owned byAnthony Duranti.

• Bumblebee (Shining Version, 2025)

• Series:Shining Version 03 - Shattered Universe
• Accessories: Spare balljoint piece, figure stand, 2 open hands, left thumbs up hand, Autobot pistol, Spike Witwicky figurine, communications monitor

Released in the third wave of Blokees'Shining Version line, this edition of the originalGalaxy Version Bumblebee mold is now decoed in his yellow-and-blueMarvel Comics coloration, and like his second Yearly Version set release; he features translucent eye parts and painted chest, and a torso frame that lights up upon shaking (or at least justlightly tap some areas on the torso), causing the eyes and his chest window to glow for a limited time. In addition to his identical accessories from theGalaxy Version release, Bumblebee also comes with an additional Spike Witwicky figurine replacing the previous release's blast effect, and a larger figure stand. The visual on a communications monitor depicts Spike Witwicky in his Exo-Suit inThe Transformers: The Movie.

References