Movatterモバイル変換

{"NAME":"Tuya LED Strip","GPIO":[1,1,1,1,1,1,0,0,1,1,1,1,1,0],"FLAG":0,"BASE":54}

WARNING: New Tuya devices have replaced their Wi-Fi module with one incompatible with Tasmota!!!
Tuya-Convert might not be possible for this device since the template was added (2022-09-29).

Device has to be configured via this method: https://tasmota.github.io/docs/TuyaMCU/ because there is a separate MCU present.

Following fnID-to-dpID-mapping makes the basic functions work:

dpID	datatype	fnID	note
20	1	11	Relay (on/off)
22	2	21	Brightness (use ‘Backlog Dimmer 10; Dimmer 1000’ command to enable dimmer)
24	3	24	RGB (Test with TuyaSend3 24,ff0000646464ff)

”fnID-to-dpID-mapping may be not complete but covers basic functions (on/off; RGB; Brightness)Following dpIDs are available additionally but functions are not known (at least to me):

dpID	datatype	note
21	4	–
23	2	RX value 500, Value doesn’t change in console
26	2	shows sometimes values that are not 0

Feel free to include that information, it could help somebody to find the last pieces of information”