Avatto Temperature and Humidity Sensor and IR Controller (S08Pro)
Available from:
Aliexpress.com
Install method:
Replace module
| GPIO # | Component |
|---|---|
| GPIO00 | None |
| GPIO01 | I2C SDA 1 |
| GPIO02 | None |
| GPIO03 | I2C SCL 1 |
| GPIO04 | Led 1 |
| GPIO05 | IRrecv |
| GPIO09 | None |
| GPIO10 | None |
| GPIO12 | None |
| GPIO13 | Button 1 |
| GPIO14 | IRsend |
| GPIO15 | None |
| GPIO16 | None |
| GPIO17 | None |
Configuration
{"NAME":"S08Pro","GPIO":[0,640,0,608,288,1088,0,0,0,32,1056,0,0,0],"FLAG":0,"BASE":18} This device uses WB3S module which needs to be replaced withESP8685-WROOM-01,ESP-12,ESP-C3-12F,ESP-12H,ESPC2-12 orESP8684-WROOM-01C. Read more about module replacement ina detailed guide.
There is an AHT10 temperature/humidity sensor (bottom left on pic). I’ve removed TuyaMCU chip and closed SCL/SDA pins on PCB directly to ESP8266. It works great with AHT1x Tasmota driver#define USE_AHT1x:
[8]ページ先頭
©2009-2025 Movatter.jp