Tentatek Splattershot
TheTentatek Splattershot is amain weapon in theSplatoon series. It is theTentatek-branded version of theSplattershot.
Appearance
The Tentatek Splattershot's appearance in each game is based on the defaultSplattershot variant from the same game with an addedTentatek branding.
InSplatoon, the sticker of Tentatek's oval logo is pasted on both sides of the gun's ink tank.
InSplatoon 2, a white tape strip bearing Tentatek's logo and wordmark wraps the gun's ink tank in a diagonal position.
InSplatoon 3, the gun's whole ink tank and its strap is recolored hot pink with a white embossed Tentatek's figure 8 logo and the brand's white wordmark beneath the logo on both sides of the ink tank.
Splatoon
| Basic information | |
|---|---|
| Category | Main |
| Class | Shooter |
| Sub | |
| Special | |
| Special points | |
| Special depletion | |
| Range | 50 / 100 |
| Damage | 45 / 100 |
| Impact | |
| Fire rate | 55 / 100 |
| Charge speed | |
| Ink speed | |
| Mobility | |
| Durability | |
| Handling | |
| Obtainable at | |
| Level | 4 |
| Cost | |
| Requirement | |
| Added in | Initial Release (1.0.0) |
| Specifications | |
| Weight | |
| Base damage | 35 |
| Base duration | |
| Ink consumption | 0.9% |
| Base range | |
| Rate of fire | |
| Muzzle velocity | |
| Base accuracy | |
| MPU effect | |
| SPU effect | |
| SPU effect | |
| Other variants | |
The Tentatek Splattershot is an all-around weapon in terms of power, range, and rate of fire, making it easy to use for players of all levels of experience. When utilized, it sprays a steady splattering ofink until the player'sink tank is depleted. It comes in a set withSuction Bombs and theInkzooka.
Data
- The Tentatek Splattershot is amiddleweight weapon.
- Each shot consumes 0.9% of the ink tank capacity.
- This allows players to fire 111 shots before needing to refill the ink supply.
- This stat can be changed withInk Saver (Main).
- When firing continuously, it shoots a bullet every 6 frames (10 shots per second).
- When firing while moving, the player's movement speed is set to 0.72 units per frame.
- After firing, there is a 20 frame cooldown before the ink tank starts refilling.
- Each shot has a base damage of 35.
- Shots travel straight for 4 frames. After that, they may lose damage. A shot will lose damage until it reaches 17.5 damage at frame 15.
- Shots have a radius of 2 units.
- The angle its shots can deviate while on the ground is 6 degrees.
- The angle its shots can deviate while in the air is 15 degrees.
- The outer reticle immediately expands after jumping. The outer reticle will finish shrinking after 60 frames.
- The chance to shoot towards the outer reticle instead of the inner reticle increases by 2% per shot, and maximizes at a 25% chance to shoot towards the outer reticle.
- This means that it takes 13 shots to reach minimum accuracy.
- When jumping, the chance to shoot towards the outer reticle instead of the inner reticle is immediately set to 40%.
- Accuracy starts recovering 6 frames after the player stops shooting.
- Shots initially travel straight at a rate of 22 units per frame for 4 frames. Shots travel straight for 88 distance units.
- Ink droplets occur every 75 units.
- The frequency at which ink drips from a shot occurs at a rate of 2 droplets per shot.
- There are a total of 5 different droplet patterns that can be created while firing this weapon.
- Droplets that occur within 11 units of the player have a radius of 19.2 units.
- Droplets that occur when they travel past 200 units of the player have a radius of 18 units.
- All other ink droplets have a radius of 13 units.
Version history
| Version | Adjustments |
|---|---|
| 2.2.0 |
|
| 2.7.0 |
|
Quotes
| Sheldon's Introduction TheTentatek Splattershot, designed in collaboration with the populargear brandTentatek! It's no different in stats to the standardSplattershot, but it comes withSuction Bombs and theInkzooka! This makes it useful against tricky foes who like to keep their distance from you. I hope you'll try it out!(EU/OC) |
| Sheldon's Introduction TheTentatek Splattershot- designed in collaboration with the populargear brandTentatek! Its stats are the same as the standardSplattershot, but it comes withSuction Bombs and theInkzooka! This makes it useful against tricky foes who like to keep their distance from you. Give it a shot, so to speak!(NA) |
| “ | A slickSplattershot developed in collaboration with top gear brandTentatek. With all-new options, theTentatek Splattershot ensures you'll be ready for anything. | ” | — In-Game Description | ||
| “ | This loadout is most useful during rankedSplat Zones matches.Suction Bombs can be used to set traps behind walls in Splat Zones. TheInkzooka allows you to put up a fight from a much greater distance and hit enemies who are on higher ground.Ink Saver (Main) andInk Saver (Sub) areabilities you should consider when equipping this loadout. | ” | — Splatoon Prima Guide | ||
- Notes
Gallery
Promotional image
AnInkling boy running with the Tentatek Splattershot.
Standing on a box.
An Inkling boy holding the Tentatek Splattershot in a promotion forTentatek.
Official art of an Inkling holding the Tentatek Splattershot.
The Tentatek Splattershot's range in the testing area.
An Inkling with the Tentatek Splattershot equipped.
The Inkling Girl (Lime Green)amiibo holds the Tentatek Splattershot.
The recolored Inkling Boy (Purple) amiibo does as well.
SplatNet icon
Demonstration
Splatoon 2
| Basic information | |
|---|---|
| Category | Main |
| Class | Shooter |
| Sub | |
| Special | |
| Special points | 200p |
| Special depletion | |
| Range | 50 / 100 |
| Damage | 47 / 100 |
| Impact | |
| Fire rate | 60 / 100 |
| Charge speed | |
| Ink speed | |
| Mobility | |
| Durability | |
| Handling | |
| Obtainable at | |
| Level | 4 |
| Cost | |
| Requirement | |
| Added in | Initial Release (1.0.0) |
| Specifications | |
| Weight | |
| Base damage | 36 |
| Base duration | |
| Ink consumption | 0.92% |
| Base range | |
| Rate of fire | |
| Muzzle velocity | |
| Base accuracy | |
| MPU effect | |
| SPU effect | |
| SPU effect | |
| Other variants | |
The Tentatek Splattershot returns inSplatoon 2, now based on theSplattershot's redesign in that game, and differs in appearance with a banner wrapped around the ink reservoir with aTentatek logo. It comes withSplat Bombs and theInkjet.
Data
- The Tentatek Splattershot is amiddleweight weapon.
- The matchmaking range is 125. The game's matchmaking system looks at a team's average matchmaking range value, and matches them against a team with a similar average.
- The ink consumption of 0.92% and ink tank capacity of 100% allows players to fire 108 shots before needing to refill the ink supply.
- This stat can be changed withInk Saver (Main).
- When initially firing the weapon in humanoid form, the first shot takes 3 frames to come out.
- When firing from swim form, the first shot takes 11 frames to come out.
- The interval between firing and when the player is able to enter swim form or use a sub weapon is 4 frames.
- When firing continuously, it shoots a bullet every 6 frames (10 shots per second).
- When firing while moving, the player's movement speed is set to 0.72 units per frame.
- After firing, there is a 20 frame cooldown before the ink tank starts refilling.
- Each shot has a base damage of 36.
- If a shot is in the air for more than 8 frames after being fired, it loses 0.5625 damage per frame until it reaches 18 damage at frame 40.
- The bullet hitbox has a radius of 2 units.
- The angle its shots can deviate while on the ground is 6 degrees.
- The angle its shots can deviate while in the air is 12 degrees.
- The outer reticle immediately expands after jumping. After 25 frames, the outer reticle will start shrinking, and will finish shrinking after 70 frames.
- The Tentatek Splattershot starts off having a 1% chance to shoot towards the outer reticle instead of the inner reticle.
- This chance increases by 1% per shot, and maximizes at a 25% chance to shoot towards the outer reticle, meaning that it takes 24 shots to reach minimum accuracy.
- When jumping, the chance to shoot towards the outer reticle instead of the inner reticle is immediately set to 40%.
- Accuracy starts recovering 6 frames after the player stops shooting. The chance to shoot towards the outer reticle decreases by 1.5% per frame, if the chance is not already at the minimum, meaning that it takes 22 frames to reach maximum accuracy. (32 after shooting while jumping.)
- Shots initially travel straight at a rate of 22 units per frame for 4 frames. Shots travel straight for 88 distance units.
- After that, the shot's velocity is set to 14.495 units per frame if it is not already lower than the listed value, and decreases further as it travels.
- Ink droplets occur every 92 units.
- The frequency at which ink drips from a shot occurs at a rate of 1.5 droplets per shot.
- There are a total of 6 different droplet patterns that can be created while firing this weapon.
- Droplets that occur within 11 units of the player have a radius of 18 units, and a width of 12 units.
- These droplets have their radius multiplied by a value ranging from 1.2 if they fell from a height above 100 units to 1.4 if they fell from a height below 30 units.
- Droplets that occur when they travel past 200 units of the player have a radius of 16 units.
- All other ink droplets have a radius of 12.8 units.
- Droplets that are far from the player and all other droplets have their radius multiplied by a value ranging from 1 if they fell from a height above 100 units to 1.2 if they fell from a height below 30 units.
Version history
| Version | Adjustments |
|---|---|
| 1.1.2 |
|
| 1.3.0 |
|
| 2.3.0 |
|
| 4.2.0 |
|
| 4.4.0 |
|
| 4.7.0 |
|
| 5.0.0 |
|
| 5.1.0 |
|
| 5.3.0 |
|
| 5.4.0 |
|
| 5.5.0 |
|
Quotes
| Sheldon's Introduction TheTentatek Splattershot is the product of a collaboration with the gear brandTentatek! Its stats are the same, but it now hasSplat Bombs as its sub weapon and theInkjet special, allowing players to push the front lines! I'd recommend it for anyone who wants to quickly expand their team's turf and raise their team's morale! |
Gallery
The Tentatek Splattershot inSplatoon 2.
Holding the Tentatek Splattershot.
An Inkling girl with a Tentatek Splattershot
Demonstration
Splatoon 3
| Basic information | |
|---|---|
| Category | Main |
| Class | |
| Sub | |
| Special | |
| Special points | 190p |
| Special depletion | |
| Range | 52 / 100 |
| Damage | 47 / 100 |
| Impact | |
| Fire rate | 60 / 100 |
| Charge speed | |
| Ink speed | |
| Mobility | |
| Durability | |
| Handling | |
| Obtainable at | |
| Level | 10 |
| Cost | |
| Requirement | |
| Added in | Chill Season 2022 (2.0.0) |
| Specifications | |
| Weight | |
| Base damage | 36 |
| Base duration | |
| Ink consumption | |
| Base range | |
| Rate of fire | |
| Muzzle velocity | |
| Base accuracy | |
| MPU effect | |
| SPU effect | |
| SPU effect | |
| Other variants | |
The Tentatek Splattershot returns inSplatoon 3 with a new design, coming with Splat Bombs and theTriple Inkstrike. It was added to the game as part of theChill Season 2022 update on1 December 2022.
Data
- The Tentatek Splattershot is amiddleweight weapon.
- The matchmaking range is 12.9. The game's matchmaking system looks at a team's average matchmaking range value, and matches them against a team with a similar average.
- The ink consumption is 0.92% per shot, allowing the user to fire for about 10.8 seconds on a full ink tank.
- When firing continuously, it shoots a bullet every 6 frames (10 shots per second).
- When firing from humanoid form, the first shot takes 3 frames to come out. When firing from swim form, the first shot takes 12 frames to come out.
- The interval between firing the weapon and being able to enter swim form or use a sub weapon is 4 frames.
- When firing while moving, the player's movement speed is set to 0.072 units per frame.
- After firing, there is a 20 frame cooldown before the ink tank starts refilling.
- Each shot has a base damage of 36 and minimum damage of 18.
- If a shot is in the air for more than 8 frames after being fired, it will lose about 0.56 damage every frame until it reaches 18 damage at frame 40.
- The bullet hitbox for collisions with players has a radius of 0.285 units.
- The bullet hitbox for collisions with the environment has a radius of 0.2 units.
- The angle its shots can deviate while on the ground is 4.86 degrees.
- The angle its shots can deviate while in the air is 11.66 degrees.
- The outer reticle immediately expands after jumping. After 25 frames, the outer reticle will start shrinking, and will finish shrinking after 70 frames.
- The weapon starts off having a 1% chance to shoot towards the outer reticle instead of the inner reticle.
- This chance increases by 1% per shot, and maximizes at a 25% chance to shoot towards the outer reticle, meaning that it takes 24 shots to reach minimum accuracy.
- When jumping, the chance to shoot towards the outer reticle instead of the inner reticle is immediately set to 40%.
- Accuracy starts recovering 6 frames after the player stops shooting. The chance to shoot towards the outer reticle decreases by 1.5% per frame, if the chance is not already at the minimum, meaning that it takes 22 frames to reach maximum accuracy. (32 after shooting while jumping.)
- Shots initially travel straight at a rate of 2.266 units per frame for 4 frames. Shots travel straight for 9.064 distance units.
- After that, the shot's velocity is set to 1.493 units per frame if it is not already lower than the listed value, and it loses 36% of its speed every frame (including the first frame after it stops traveling straight). Once the shot velocity decreases below a certain threshold, it will begin to be slowed less and fall faster.
- The effective range is about 11.56 units.
- This number may vary at different firing angles.
Version history
| Version | Adjustments |
|---|---|
| 4.1.0 |
|
| 9.2.0 |
|
| 11.0.0 |
|
Weapon freshness rewards
| Icon | Name | Type | Availability |
|---|---|---|---|
| Sheldon License | Currency | 1★Freshness Rating | |
| Tentatek Splattershot sticker | Sticker | 2★Freshness Rating | |
| Tentatek Splattershot holo sticker | Sticker | 3★Freshness Rating | |
| 4★ Tentatek Splattershot User | Badge | 4★Freshness Rating | |
| 5★ Tentatek Splattershot User | Badge | 5★Freshness Rating | |
| 6★ Tentatek Splattershot User | Badge | 6★Freshness Rating | |
| 7★ Tentatek Splattershot User | Badge | 7★Freshness Rating | |
| 8★ Tentatek Splattershot User | Badge | 8★Freshness Rating | |
| 9★ Tentatek Splattershot User | Badge | 9★Freshness Rating | |
| 10★ Tentatek Splattershot User | Badge | 10★Freshness Rating |
Quotes
| Sheldon's Introduction As if the originalSplattershot wasn't stylish enough, a special collab gives us theTentatek Splattershot! Functionally, the weapon is identical to a regular Splattershot. But its fashion-forward form comes withSplat Bombs and the fearedTriple Inkstrike special. It's always in style to mix things up, so I recommend this loadout for Splattershot users who dare to be different. Talk about très dangereux! |
Gallery
Promotional render
AnOctoling holding the Tentatek Splattershot.
Alternate angle.
The Tentatek Splattershot sticker in a locker.
2D icon
TheTableturf Battlecard icon of the Tentatek Splattershot.
- Load videoLocal FileLocal File might collect personal data.
The Tentatek Splattershot model rotating. (Link to file)
Strategy
For competitive tips about the Tentatek Splattershot
| View the strategy page. |
Trivia
- From Versions1.3.0 to2.3.0 ofSplatoon 2, the Tentatek Splattershot's Inkjet required 230p to fully charge, being one of only 2 weapons in the entireSplatoon series to have had a special points requirement greater than 220p, the other weapon being theBallpoint Splatling Nouveau inSplatoon 2.
- After its announcement forSplatoon 3'sChill Season 2022 update, the Tentatek Splattershot's special weapon was not initially revealed. The confirmation ofTriple Inkstrike's inclusion happened indirectly before the update released, as it appears on the weapon'sTableturf Battle card art.
- This weapon isGoggles' general weapon in the first two volumes of theSplatoon Manga.
Etymology
Tentatek Splattershot is a combination ofsplatter (as well assplat) andshot. It has theTentatek brand name as a prefix to differentiate it from theSplattershot. It also denotes that the weapon is a collaboration with Tentatek.
Its Japanese name, スプラシューターコラボsupurashūtā korabo, is a combination of eithersplat orsplash, andshooter. It also has the abbreviated prefixcollab to separate it fromSplashooter and to denote that it is a collaboration. However, unlike the English name, it does not specify the brand Tentatek.
Names in other languages
| Language | Name | Meaning |
|---|---|---|
| スプラシューターコラボ supurashūtā korabo | Splashooter Collab | |
| Tentatek Superspetter | Tentatek Splattershot | |
| Liquéficateur Tentatek | Tentatek Liquificator | |
| Liquidateur griffé | Branded Liquidator | |
| Tentatek-Kleckser | Tentatek Splattershot | |
| Splasher logo | Splasher logo | |
| Каплестрел «Щуччи» Kaplestrel «Shchuchchi» | Dropshooter «Tentatek» | |
| Rociador Tentáctica | Tentatek Sprayer | |
| Lanzatintas B | Ink Thrower B | |
| 斯普拉射击枪 联名 | Splashooter Collab | |
| 斯普拉射擊槍 聯名 | Splashooter Collab | |
| 스플랫 슈터 컬래버 seupeullaet syuteo keollaebeo | Spla Shooter Collab | |
| Shooter_Normal_01[5] |
References
- ↑Splatoon - NormalShotNormal.params
- ↑
Splatoon 2 - Parameter Database
- ↑
Splatoon 2 - Weapon and Gear Database
- ↑
Splatoon 3 - Parameter Database
- ↑
Leanny on GitHub







