Stickerz Splatana Stamper
TheStickerz Splatana Stamper is amain weapon inSplatoon 3. It is anEmberz-branded version of theSplatana Stamper.
Appearance
The Stickerz Splatana Stamper looks like the Splatana Stamper, but the handle is bright yellow and the blade is darker with stickers on it, including theEmberz logo.
Splatoon 3
| Basic information | |
|---|---|
| Category | Main |
| Class | |
| Sub | |
| Special | |
| Special points | 190p |
| Special depletion | |
| Range | 75 / 100 |
| Damage | 43 / 100 |
| Impact | |
| Fire rate | |
| Charge speed | |
| Ink speed | |
| Mobility | |
| Durability | |
| Handling | 60 / 100 |
| Obtainable at | |
| Level | 22 |
| Cost | |
| Requirement | |
| Added in | Splatlands Collection (10.0.0) |
| Weight | |
| Base damage | |
| Base duration | |
| Ink consumption | |
| Base range | |
| Rate of fire | |
| Muzzle velocity | |
| Base accuracy | |
| MPU effect | |
| SPU effect | |
| SPU effect | |
| Other variants | |
The Stickerz Splatana Stamper was released as part of theSplatlands Collection on 12 June 2025. Its kit isAutobomb andBooyah Bomb.
Data
- The Stickerz Splatana Stamper is amiddleweight weapon.
- The matchmaking range is 16.5. The game's matchmaking system looks at a team's average matchmaking range value, and matches them against a team with a similar average.
- The Stickerz Splatana Stamper fires projectiles as it swings.
- The Stickerz Splatana Stamper can lunge forward if the user performs a charge slash while moving forward on the ground.
- The Stickerz Splatana Stamper cannot store its charge.
Horizontal slash (pressing ZR)
- The ink consumption of 5.2% per slash allows the user to slash 19 times per ink tank.
- After slashing, there is a 40 frame cooldown before the ink tank starts refilling.
- While slashing, the user's speed is set to 0.06 units per frame.
- The projectile of the slash deals 35 damage, and the blade itself deals 20 damage, for a combined total of 55 damage.
- The projectile hitbox consists of 5 smaller hitboxes that become larger the closer they are to the center of the projectile. The center hitbox has a radius of 0.37 units, and the edge hitboxes have a radius of 0.32 units. The hitboxes cover a total width of 2.64 units.
- The projectile travels at 2.82 units per frame for 6 frames and spawns 1.4 units in front of the user, combining for a total distance of 18.69 units.
- The blade hitbox extends about 3.5 units in front of the user, and about 1.6 units to either side of the user.
- The weapon can be used again 26 frames after the slash starts.
- Due to this, the time between continuous slashes is 26 frames.
- The user can submerge in ink 22 frames after the slash starts.
- The blade hitbox appears 6 frames after the slash starts, and the projectile appears 9 frames after the slash starts.
Vertical slash (Holding ZR)
- The ink consumption of 11.7% per slash allows the user to slash 8 times per ink tank.
- After slashing, there is a 40 frame cooldown before the ink tank starts refilling.
- While charging or slashing, the user's speed is set to 0.06 units per frame.
- The projectile of the slash deals 70 damage, and the blade itself deals 140 damage, for a combined total of 210 damage.
- The projectile hitbox consists of 7 smaller hitboxes that become larger the closer they are to the center of the projectile. The center hitbox has a radius of 0.55 units, and the edge hitboxes have a radius of 0.35 units. The hitboxes cover a total height of 3.9 units.
- The projectile travels at 0.8 units per frame for 26 frames and spawns 0.8 units in front of the user, combining for a total distance of 22.15 units.
- The blade hitbox extends about 4 units in front of the user, and about 0.5 units to either side of the user.
- It takes 20 frames to fully charge the weapon.
- If the user is out of ink, then it takes 60 frames to fully charge the weapon.
- The weapon can be used again 22 frames after the slash starts.
- The user can submerge in ink 14 frames after the slash starts.
- The blade hitbox appears 3 frames after the slash starts, and the projectile appears 6 frames after the slash starts.
- Lunges cover a distance of 3.0 units.
- After 3 frames of startup, the lunge lasts for 8 frames. The blade hitbox appears after 15 frames, and the projectile appears after 18 frames.
- The total animation lasts for 30 frames, after which the weapon can be used again.
- The user can submerge in ink 25 frames after the animation starts.
Version history
| Version | Adjustments |
|---|---|
| 11.0.0 |
|
Quotes
| Sheldon's Introduction You know what goessplat? Your opponents when you use theStickerz Splatana Stamper! And the actual stickers thatEmberz splatted onto the sides of thisweapon.Stickers DO go splat, right? Or are mine expired... No matter! This set comes with theAutobomb sub, so you can charge in as enemies are revealed and hit 'em with a charged slash!And if you notice someone sizing you up from afar, unleash your ownBooyah Bomb special to level the playing field. Try this set out if you aspire to total domination in battle! |
| “ | TheStickerz Splatana Stamper is a specially wrapped weapon coming fromEmberz in theSplatlands Collection. Get bombastic in battle withAutobombs and aBooyah Bomb. | ” | — @SplatoonNA on Twitter[3] | ||
Weapon freshness rewards
| Icon | Name | Type | Availability |
|---|---|---|---|
| Sheldon License | Currency | 1★Freshness Rating | |
| Stickerz Splatana Stamper sticker | Sticker | 2★Freshness Rating | |
| Stickerz Splatana Stamper holo stk. | Sticker | 3★Freshness Rating | |
| 4★ Stickerz Splatana Stamper User | Badge | 4★Freshness Rating | |
| 5★ Stickerz Splatana Stamper User | Badge | 5★Freshness Rating | |
| 6★ Stickerz Splatana Stamper User | Badge | 6★Freshness Rating | |
| 7★ Stickerz Splatana Stamper User | Badge | 7★Freshness Rating | |
| 8★ Stickerz Splatana Stamper User | Badge | 8★Freshness Rating | |
| 9★ Stickerz Splatana Stamper User | Badge | 9★Freshness Rating | |
| 10★ Stickerz Splatana Stamper User | Badge | 10★Freshness Rating |
Gallery
2D icon
- Load videoLocal FileLocal File might collect personal data.
Model of the Stickerz Splatana Stamper rotating (link to file)
Etymology
The wordstickerz is a stylized spelling of the wordstickers.
Names in other languages
| Language | Name | Meaning |
|---|---|---|
| ジムワイパー封 jimu waipā fuu | Office Wiper Seal | |
| Stempelzwieper Pläkkerz | Stamp Splatana Stïckerz[a] | |
| Éclatana d'estampe décollius | Print Splatana removerz[b] | |
| Éclatana d'estampe décapex | Print Splatana scouremberz[c] | |
| Stempel-Splatana Sticker | Stamp Splatana Sticker | |
| Сплат-печатель «Уклейка» Splat-pechatel' «Ukleyka» | Splat-seal «Sticking»[d] | |
| Azotintador Pro CLX | Fromazote ("whip") +entintador ("inker") + Pro SKZ[e] | |
| Azotintador pro pegatas | Fromazote ("whip") +entintador ("inker") + pro stickers | |
| 스티커 사무 와이퍼 seutikeo samu waipeo | Sticker Office Wiper |
Translation notes
- ↑Stylized spelling ofplakkers ("stickers")
- ↑Fromdécoller ("to remove", "to peel off" in the context of a sticker) and the name of Emberz in the French (NOA) version,Tizonius
- ↑Fromdécaper ("to scour") and the name of Emberz in the French (NOE) version,Apex
- ↑From уклеитьukleit' ("to glue or stick all over") and наклейкаnakleyka ("sticker")
- ↑Fromcalcomanías ("stickers") and the name of Emberz in the Spanish version,Ascuax.



